Sound and i Tunes

I just got a free, used iPod shuffle 1st Generation and it won't show up on iTunes. It shows up on "my computer" though, that's how I got songs on it. As soon as I did I tried to listen to it. Key word- "tried". I got the first chord of the songs I tried to listen to. Not only that, but it made click-y sounds and there was static. I tried holding it different ways, shaking it, everything. I finally got a song to play. I could hear the guitar, bass, and drums fine, but when the singer started singing I could only hear a whisper on his voice. I checked the headphones, pushing them in and turning them. Nothing worked. Is anyone else having this problem? If so, have you solved it?

it also cuts out right b4 the lyrics start

Similar Messages

Qosmio G20 - sound and tv tuner drivers (digital)

Hello all,
I recently purchased a Qosmio G20 (490ls) in Japan and have had nothing but problems thus far.
The original OS that came bundled with the computer was Windows XP Home (Japanese). I can not read Japanese but I have an English version of Windows XP MCE so I didn't think this would be an issue.
I could not install it correctly so I handed it over to a tech and he accidently wiped everything (the OS, drivers etc) and I do not have a recovery disk from the original.
Anyways I gave it to a new tech to install and they are almost finished except they are missing 2 drivers --- the sound driver and the tv tuner driver. The European drivers are analog and do not work on the Japanese version, however, it needs digital drivers.
I am in desperate need of a "digital sound driver" and a "digital tv tuner driver", if anyone could help me out or point me in the right direction it would be much appreciated =)
Thank you

Hello Michael
I am very happy that you are there. Maybe you can give us very useful information. I have heard that just TV tuner from Japan can be used in whole world without any standard restriction.
Do you know something about that?
Maybe it is the reason why you can not configure it properly. I am pretty sure that the driver for your unit is designed just for Japanese market and it is possible that our European driver doesnt work properly. Check the driver from US download site
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

11.2.2.3 I-tunes no sound and freezes, windows 7

I have a Toshiba Satellite A660 Series laptop. I have Itunes 11.2.2.3. I-tunes was working fine yesterday. I downloaded music from itunes and played it.Watched some videos from a concert I went too. Worked fine. Last thing I did was download some CD's I bought on a cruise. Today I-Tunes gives me a message Itunes has detected a problem with your audio configuration audio/video playback and may not operate properly. When I click on a song nothing happens. It's as if I never clicked on a song in my library. I-tune freezes. There is No sound. Videos .mov will play but no sound to them. I have Windows 7. I've done most of the things I've read on the subject. Plugged in a headset. Nope. Checked to make sure sound is not muted. Went in and checked to make sure the default speaker Realteck High Definition Audio was alright. Checked Properties says this device is working properly.I even used something from microsft windows to do a sound check. It said something about Vera??I might be sayig it incorrectly. Anyway I am at a loss of what is going on here. Please does anyone know what is wrong with my sound and itunes?

Figured out the sound problem is a Malwaebytes false positive on 6/5/14. Not sure about the freeze issue yet.

I have a Mac OS X 10.7 Lion and have lost the sound in I Tunes. How to fix?

I have lost the sound in I Tunes. I have a Mac OS X 10.7 Lion. All other sound is fine i just cannot get any sound from my music library. How to fix?
Terry

Hi janet,
Software that runs on your Mac cannot run on your iDevices. Different operating systems. You will have to go to the App Store on your iPad to see if you can find the equivalent software for your device.
Sorry,
GB

Can get sound thru i tunes but not on internet

can get sound thru i tunes but not on internet

You are welcome.
As best as I can recall, the MacBook will try to remember your settings.
You can test it out - just hook your machine up to the TV and use it as a second display. Try some sounds.
-charlie

Saved backing track sounds out of tune

Hi everyone,
I am having problems recording external audio (a backing track with drums and keyboards) from my synthersizer to Garageband. Sometimes when I do this it is saved successfully but it sounds out of tune and I am not sure why this is?
My synthersizer is connected to my apple computer with an audio cable and I always try to make sure that the tempo of the track on my Korg Triton Extreme synthersizer is the same as the tempo/speed on the track I have created on Garageband.
Any advice about this matter would be gratefully received.
Many thanks.

Sculpture is not like other synths, period. One can't assume it obeys the laws of traditional subtractive or FM synthesis. The beast acts like a string. If the tension is slack, like putting a .07 string on the first string of a guitar, the note will be flat when struck and then become more in tune as is decays. Sculpture requires a lot of tweeking time to understand. The string tension, density and resolution are critical parameters. The higher or lower the note requires settings to couteract out of tune notes via these parameters. There are also "residual" effects that happen, perhaps even bugs. For instance, sometimes a reverb from the end of a track that had not finished it's tail before stopping, will be continued when the track is started from the beginning again. Sculpture has these residual effects but they can take different forms. Sculpture takes into account the vibrations of any note previous to a note played. That's to say if you play a note fresh with no note having been played before it, it will sound different if you played the same note and there had been a note played previous to it because it understands there are vibrations already happening which it encompasses into the new vibrations. So if there are vibrations still tailing off and you hit stop, those vibrations may act again at the beginning of the song and change the tuning of the first few notes. To make sure this doesn't happen, extend the song end and let any tails of synthesis or reverbs to complete before starting the song again. That being said, you will never get the same sound twice with Sculpture, it will play differently every time! It's almost human. Lovely synth, my friend.

Need sound and webcam drivers for Satellite A660-156

hi all,
my hard disk was physically damaged and replaced by new one. All data and setting were copied.
But I found that no sound and webcam drivers are installed. I successfully had found them and installed, but still no changes. See sound icon with 'no sound' indication, click on it to fix the problem, but no problems have been found.
Offered to see additional info or close the window. On Toshiba website found two sound drivers, but it doesn't help.
Any idea how to fix that problem?
Thnx in advance!

Hmm I think you shoud ochekc if you have installed all the drivers in the right order:
Here is the one which i found in one thread:
1 Windows 7 64bit
2 QFE KB974332
3 QFE KB974431
4 QFE KB974571
5 QFE KB975467
6 QFE KB975806
7 QFE KB978258
8 QFE KB977620
9 QFE KB975777
10 QFE KB972270
11 QFE KB977609
12 QFE KB979099
13 QFE KB978251
14 QFE KB971468
15 QFE KB975560
16 QFE KB977074
17 QFE KB978207
18 QFE KB978506
19 QFE KB978262
20 QFE KB976422-x64
21 Registry Patch for System Restore V1.00.00
22 PlayReady PC Runtime 1.3
23 TOSHIBA Bulletin Board 1.6.07.0
24 TOSHIBA ReelTime 1.6.06.0
25 Intel Chipset SW Installation Utility 9.1.1.1024
26 Intel Management Engine Interface V6.00.40.1215
27 NVIDIA Display Driver 189.58
28 Intel Turbo Boost Technology Driver 1.1.1.1007
29 Intel Rapid Storage Technology Driver 9.5.7.1002
30 TOSHIBA Supervisor Password Utility 1.63.0.9C
31 TOSHIBA HW Setup Utility 1.63.0.22C
32 TOSHIBA Flash Cards support utility 1.63.0.6C
33 TOSHIBA Value Added Package 1.3.4_64
34 Realtek Audio Driver 6.0.1.6069
35 NVIDIA HD Audio Driver 1.0.9.1
36 Broadcom Wireless LAN Driver V5.60.48.35_DrvOnly
37 Synaptics Touch Pad Driver V15.0.8.1
38 TOSHIBA HDD Protection 2.2.0.4
39 Bluetooth Stack for Windows by Toshiba v7.10.10(T)
40 Realtek LAN Driver V7.013.0112.2010
41 Jmicron Card Reader V1.00.44.01
42 ENE CIR Driver (if available) V3.2
43 YUAN DVB-T/ATSC Tuner Driver (if available) 2.3.3.31
44 TOSHIBA Sleep Utility 1.4.1.1
45 TOSHIBA eco Utility 1.2.11.64
46 Intel Proset 13.1.1.0.1.s64
47 TOSHIBA HDD/SSD Alert 3.1.64.6
48 TOSHIBA Service Station 2.1.40
49 HDMI Control Manager 2.0.0.5.64
50 TOSHIBA Remote Control Manager 3.0.1.0
51 TOSHIBA PC Health Monitor 1.6.0.64
52 TOSHIBA Fingerprint Utility 1.0.2.27
53 ConfigFree 8.0.29
54 TOSHIBA Web Camera Application V1.1.1.15
55 TOSHIBA Face Recognition 3.1.3
56 TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-7
58 PatchFiles PCIIDEREG-1.1
59 PatchFiles TosVolRegulator_x64_1.1

HT204370 why is there a lag between sound and the film

can anyone help me my films in i tunes have a lag between the sound and the picture. They worked fine when i purchased them but have now developed this time delay, Very annoying when their lips move but out of time to thier spoken word.

Hey ben.brittain,
There's an article that helps troubleshoot video playback issues within iTunes for Windows 7. It specifically mentions audio that is out of sync with the image on-screen. You can check it out here:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Cheers,
David

Help!! Static sound and Lock ups

I recently updated to the newest Ipod Mini version software 1.4. and when i play the songs on my ipod i get static sounding sounds and when i look at the display timer, it looks like the ipod i slowing down.
Also i'm getting lockups when i'm browsing.
Ipod service told me to restore the ipod, and i have 3 times, 1 to the factory software version, and twice to the newer version. It didn't help, as i'm still hearing static sounds, and I've switched headphones and headphone jacks, and it still doesn't help.

the exact same thing happened to me. Mine is an original mini which needless to say is out of warranty, so I need an answer that is not "replace the hardware". Is there a way to restore it to a previous version of the software?
mini Windows XP
Windows XP

Disable sound and/or vibration while in Messages app?!

Hi!
I would like to know is there some option in the iOS where I could disable sounds and vibration while I'm using Messages app (app is open and the display is turned ON and I can see the message I recieved). This is very annoying when I'm using iMessages and getting a message every few seconds and then my phone vibrates constantly. It is of course OK if I'm not in Messages app but when I'm already using it I don't need a notification I got a message when I can see it for myself.

I'm having the exact same problem. I get a random text message ding for no discernible reason at least oncer per day. No alerts from apps, no email, no texts, no missed calls, no voicemails. It's not changing connection types between wifi, 3G, and edge. I know that the first gen iPhones sometimes dinged in that situation. If anyone knows what's causing this I would love to hear it.
Just to be clear I'm using a perfectly normal, not jailbroken, iPhone 4 running the latest software version.
Regards,
John G.

HP ENVY TouchSmart 4 Ultrabook - Sound and Video Lags and Distortions

This issue has been previously reported and noted as solved, but it is not solved. See the link to the other post below.
Ways in which I attempted to address this myself...
I first re-installed all drivers and updates, including BIOS updates. After that didn't fix the problem, I did a full wipe/re-install of windows 8, and again, updated all drivers from the HP website. This issue happens on both Windows 8 and Windows 8.1. I then did an exchange, and even the new exchange ultrabook is experiencing this issue. HP technicians, there is something faulty with this device. Please acknowledge and address ASAP.
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Distorted-sound-on-my-Envy-TouchSmart-4-Ult...

Its crazy
Check the System
HP Software Framework must for IDT Sound Driver
Intel Chipset Installation Utility and Driver must the new for Windows 8.1
Intel Management Engine Interface (MEI) must the new for Windows 8.1
UEFI for your Notebook
Adds the Audio Test.
Provides improved support for tablet systems
or test October 10, 2013
ftp://www.compaq.com/pub/softpaq/sp63501-64000/sp63852.exe
Please test the same with HP System Event Utility
ftp://www.compaq.com/pub/softpaq/sp63501-64000/sp63805.exe
Newest IDT November 11, 2013
ftp://www.compaq.com/pub/softpaq/sp63501-64000/sp63940.exe
deactivate or remove antivirus application for installation, Download Select the correct manufacturer and remove the software
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Sound and cam can't work in this old lenovo note book computer model 3000 N100

Fatory said support window XP and vista ,I allow mircosoft test vista and window 7 ,everythink can work, but now I install window 7 only ,sound and cam des't work, .I don't know why?How can my notebook sound and cam can work?

what?
you are asking about issues in windows on a lanovo laptop in the appletv forum on apples support site?
is that not a bit like asking for support for a boing 737 on philips discwaster forum ?

Satellite P200D-11R sound and graphics crash after waking up from sleep mode

Hi,
I am wondering if anyone here has had similar experiences to mine (below) or can offer any solutions.
I have upgraded my P200D-11R OS to Vista 64 Ultimate to take advantage of the extra performance. I also add that the BIOS has already been updated to version 1.4.
Well, everything works fine with the standard 2Gig of RAM which the laptop was supplied with originally, however, when I upgrade the RAM to 4Gig (2 x 2GB Samsung 667mHz modules), sound and graphics problems appear every time the machine is brought back from sleep mode.
The sound card makes a very laud fuzzy noise every time it wants to play a sound and the graphics produce lots of horizontal lines on the screen. I then just have to restart the machine which means loosing all my unsaved work.
Everything works fine as long as the machine does not enter sleep mode. I have currently disabled the sleep mode to prevent the machine from entering it but I am finding life very hard without it.
I am very surprised and also disappointed at the fact that Toshiba did not test these machines with Vista 64 Ultimate and 4Gig of RAM!
Extra info:
The memory is the same Samsung type as the 1Gig modules supplied by Toshiba originally with the machine, and the part number Toshiba recommends.
I have tried installing other (more recent) device drivers by Realtek and ATI without any improvements.
The memory modules pass all tests and are not defective. They have also been tested on my friends Dell notebook with no problems even in sleep mode.
I have installed my friends Dell 2Gig memory modules in my P200D and they too produce exactly the same results with post-sleep crashes.
My thoughts are that this must be another BIOS issue unless anyone can shed some light on the issue from another angle.
Please help! Many thanks in advance.

Hi Sascha
Since you are running a Vista 32bit version, the upper limit of the memory recocnised by the machine is 3.2gb which is the maximum a 32bit operating system can address and use. The diffrence here is that I also upgraded my OS to Vista Ultimate 64bit to get yet better performance out of the 64bit dual AMD processor.
3.2gb of RAM on 32bit OS does not necessarily increase the performance. However, it keeps the performance stable when you open many more programs at the same time since the machine has more RAM to play with before staring to use the much slower hard drive as operating memory (Page File), to keep all thoes open programs running.
A 64bit OS such as Vista Ultimate 64, recognises the whole 4gb of RAM and much more (for instance, 8gb with 2 x 4gb RAM modules). The 64bit OS itself would generally consume more RAM to start with, however, with 4gb I found the general performance to be much better. Going back to the problem however, my P200D-11R with Ultimate 64 and 4gb RAM refuses to wake up from sleep mode gracefully and the graphics and sound crash every time, forcing me to restart.
My feelings at present is that eventhough your machine may be slightly different, I bet if you upgrade your OS to 64bit, the machine will start recognising all of the 4gb of RAM and post-sleep crashes will start to appear!

When playing games on the ipad I have no sound and it it very slow.

when playing games downloaded from the app store I have no sound and the games arte very slow?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
How to Fix a Slow iPad
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-A-Slow-iPad.htm
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
If You Think iOS 7 Feels Slow Here’s How to Speed It Up
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
 Cheers, Tom

HELP! Uploading AS3 Game to server, no sound and Spacebar doesn´t work HELP!

Hello, relatively new to AS3 and flash, this is the first time i am publishing anything. We are trying to upload our simple flashgame to our webserver, the game works perfectly fine locally save for one thing. We get an error regarding TLF which says it wont stream or something. So when it gets online, no sounds play and spacebar doesn't work, left and right arrow does work. We have three TLF text fields that are used to update score, lives and show you final score. If i turn these into classical text they stop working.
Things we have tried: Changing default linkage from RLS to Merged into code, changing the text boxes to classical text(they then stop working), made sure the paths are correct(all files are in the same directory including the .swz file)
This is the code from the soundclass:
package
    import flash.net.URLRequest;
    import flash.media.Sound;
    import flash.media.SoundChannel;
    import flash.events.*;
    public class MySound
        private var bgSound:Sound;
        private var fireSound:Sound;
        private var waterSound:Sound;
        private var earthSound:Sound;
        private var lightSound:Sound;
        private var soundChannel:SoundChannel;
        public function MySound()
            soundChannel = new SoundChannel();
            bgSound = new Sound();
            var req:URLRequest = new URLRequest("BackgroundSound.mp3");
            bgSound.load(req);
            //fire
            fireSound = new Sound();
            var req2:URLRequest = new URLRequest("soundFire.mp3");
            fireSound.load(req2);
            // water
            waterSound = new Sound();
            var req3:URLRequest = new URLRequest("soundWater.mp3");
            waterSound.load(req3);
            // earth
            earthSound = new Sound();
            var req4:URLRequest = new URLRequest("soundEarth.mp3");
            earthSound.load(req4);
            // light
            lightSound = new Sound();
            var req5:URLRequest = new URLRequest("soundLight.mp3");
            lightSound.load(req5);
        public function playBgSound()
            soundChannel = bgSound.play(0, 999999);
        public function stopBgSound()
            soundChannel.stop();
        public function playFireSound()
            fireSound.play();
        public function playWaterSound()
            waterSound.play();
        public function playEarthSound()
            earthSound.play();
        public function playLightSound()
            lightSound.play();
I can somewhat get that sound can bugg out, but why does spacebar stop functioning? ANy help is greatly appreciated as this has to be delivered in twelve hours(published online) for a school assignment.

Also might add publishing it locally in my own browser everything works, as does ofcourse playing it in flash itself. Changing from RLS to merged into code stops the error from coming, but doesn´t fix the problem on the server.
Code from main class related to sound and spacebar:
import flash.display.*;
    import flash.events.*;
    import flash.ui.Keyboard;
    import flash.text.TextField;
    import flash.media.Sound;
    import flash.net.URLRequest;
    import flash.events.MouseEvent;
    import flash.utils.Timer;
    import flash.events.TimerEvent;
    public class main extends MovieClip
        private var fireTimer:Timer; //delay between shots
        private var canFire:Boolean = true;
        private var mySound:MySound;
        private var bulletSpeed:Number = -450;
          public function main()
            //load sounds
            mySound = new MySound();
        private function playGame(event:MouseEvent)
            gotoAndStop(2);
            // initialize
            myLives = 5;
            myHitsNo = 0;
            weaponType = 1;
            mybullets = new Array();
            enemys = new Array();
            myScoreTxt.text = "Score: " + myHitsNo;
            myLivesTxt.text = "Lives: " + myLives;
            fireTimer = new Timer(400, 1);
            fireTimer.addEventListener(TimerEvent.TIMER, shootTimerHandler, false, 0, true);
            stage.addEventListener(KeyboardEvent.KEY_DOWN, listenKeyDown);
            stage.addEventListener(Event.ENTER_FRAME, addEnemy);
            stage.addEventListener(Event.ENTER_FRAME, checkCollision);
            player = new thePlayer(stage.stageWidth-40, spawnPoint2);// stage.stageHeight/2);
            stage.focus = player;
            addChild(player);
            mySound.playBgSound();
public function listenKeyDown(event:KeyboardEvent) // Controls and weapontype selector
            if (event.keyCode == 37) //left
                player.movethePlayerDown();
            if (event.keyCode == 39) //right
                player.movethePlayerUp();
if (event.keyCode == Keyboard.SPACE) //space
                shootBullet();
                //soundFX.attachSound("Pistol Fire.wav");
                //soundFX.start();

Sound and i Tunes

Similar Messages

Maybe you are looking for