Sound and Vibration Spectral map not working in LabVIEW 2011

I recently installed the latest development suite with LabVIEW 2011 and sound and vibration toolkit.
Previously I have successfully used the express function "spectral map" without a speed profile for plot type "frequency-time". With the installation of LV2011 I get an error saying "OA Speed Profile attribute not found" when using the function.
The setup is pretty straight forward with express functions "Simulate Signals", "Spectral Map" and "Color Map" in series.
Is there a bug fix or workaround for this problem?
Attachments:
Spectral Map Error.png ‏30 KB
Spectral Map VI.png ‏36 KB

No, I haven't been able to make the Sound and Vibration Spectral Map express node work in LabVIEW 2011.
A workaround is to not use the express function for a spectral map. You can find the spectral map node under "Sound and Vibration"-"Order Analysis"-"Spectral Map".
I guess the speed profile should be the same for both the express and ordinary function. If so you need to input a cluster of 2 1D arrays, not a waveform. Array1 contains the time in seconds and Array2 the associated speed.

Similar Messages

How to reset Sound and Vibration Spectral map

Hi,
I want to create a Campbell diagram for a rotating machine, in live (while the machine is rotating).
This diagram is basically a graph of the spectral content a a signal (Hz), versus the rotation speed (RPM).
I've found an express VI that seems to do what i want to do (Spectral Map, in the Sound and Vibration toolkit). The output of this VI is buffered so that it can run in live (The buffer vi is also a vi that comes from the Sound and Vibration toolkit).
The block diagram of my complete process is attached to this message, sorry it's a bit messy.
On the first run, this VI works as expected: as the machine is running up, the graph is filling up. Now if I want to make a second run-up, i need to first reset the VI. However once the vi has been reset, it won't ouput anydata!
I've tried different combination:
- Reset "Waterfall and Campbell.vi" and the buffer
- Reset only the buffer
- Reset only the "Waterfall and Campbell.vi"
None of them work, the colormap stays black.
So does anyone know how to use this express vi? I could find an exemple that works with live data and buffering.
Thanks,
Regards,
peper
Attachments:
Reset waterfall.png ‏74 KB

Hi,
Attached to this post, you'll find a piece of code that replicates the problem I have in my main application.
If you run the vi with an initial small frequency (the frequency dial up simulates the rotation speed) and then increase that speed, you'll notice that the spectral map gets filled as expected.
The problem arises when I try to reset the spectral map (=do a new run-up):
- I set the frequency to a minimum
- I hit the reset button (the spectral map is emptied as expected)
- I slowly increase the frequency ===> the spectral map does NOT get filled up anymore. Or it gets filled up like 30 seconds after the run up or gets partially filled up.... in summary there is something wrong with the map each time I try to reset the septral map vi.
Let me know if you need more information.
Best regards,
peper2001
Attachments:
Campbell.zip ‏101 KB

Sound and USB ports suddenly not working

I have HP pavilion dm3-1103au which i bought about 3 years ago.. Everything was worked fine since the first time I use this notebook until about 3 weeks ago when I used it to watch a film suddenly the sound changed to noise sound and then my notebook sound not coming out at all from speaker and headset.. Then I restarted my notebook and then the sound working normally but after a moment the sound stop coming out again..
I check my sound driver to see any updates but it say my driver are up to date.. Then I go to sound control and test my speakers but it shows a warning that says "the device is being used by another application. Please close any devices that are playing audio to this device and then try again." I dont know what application that is using the sound because it happen when I didnt open any app..
After about several days later, the problem seems to became worst.. All USB ports suddenly have a problem too.. My USB mouse stop working at random time.. Then I try to insert my flashdisk and sometimes it can be recognized but when I try to copy files to my flashsdisk, it disconnected when the process of copying has not finished..
when i go to device manager the 'standard openHCD USB Host Controller' have a warning sign.. I check for updates but it says the driver was up to date.. So I try to uninstall it and restart my notebook.. but it didnt solve the problem..
I have reinstall and upgrade my windows from windows 7 to windows 8 but it still have the same problem and become worst.. now the sound not coming out at all from the speakers and headset from the windows starts.. Please help me.. I have no idea what cause the problems.. I think it's not hardware related..

Hello lynz00,
Did you check out this page to see if your computer has been tested by HP with Windows 8, prior to upgrading to Windows 8?
HP is not going to support hardware for Windows 8 on any system purchased before Oct 1st 2011. I realize your issue began prior to upgrading to Windows 8, but don't think the upgrade is the way to fix it.
Did you backup everything in Windows 7 in order to downgrade, prior to upgrading to Windows 8?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Sound and Keyboard Illumination Keys Not Working!!!

This is very strange...
I just spent a few days in the hospital. Fortunately, one of the amenities provided was free Wi-Fi. As it turned out, many people took turns using my Powerbook while I wasn't using it myself.
Most of the people that were there visiting, are not Mac-savvy, and when I got my Powerbook back, I discovered a strange surprise.
I have no sound. But it goes further than that, because the sound keys have been completely disabled! So have the keyboard illumination keys!
The icon is grayed out, and there is a circle, with a slash through it, beneath.
Here's a pic:
http://homepage.mac.com/theconfuzed1/.Pictures/misc/no_sound.png
I can't for the life of me, figure out how to fix this!
I am running 10.5.2 on a Powerbook G$
Message was edited by: Robby Cochran

Hi,
Try this:
The little 'do not enter' symbol you see means that is turned off...
For sound, the F3 key toggles the sound on and off (but does not adjust the volume). If the sound is on, the F4 key turns the volume down, and the F5 key turns the volume up. But with this, the F3 has to be touched to be on, and that symbol will disappear... then use the F5 key (you have to keep tapping it for it to move the volume. Only tap the F3 key once to turn it on, and once to turn it off.
The keyboard is much the same way. The F8 key turns it on or off, while the F9 lowers the intensity and the F10 raises the intensity. Again, one tap on the F8 for on and another for off... with multiple taps on the F9 and F10 to decrease or increase illumination.
That same screen you saw, should be seen but with hash-marks either grey (off) or white (on)... for both. While the sound has the arching sound waves from the horn if it is on, not when it's off. The keyboard has the curved hash marks around the top.
You do have it, if that screen shows... it's just to keep tapping the F5 and the F10 to increase both so you can see/hear the effects.
Enjoy

Satellite L300 does not have sound and modem is also not working

I have this Toshiba Satellite L300 (PSLB8A--1F004) an Australian model which was working perfectly well until I changed the harddrive after it developed bad sectors.
I have installed Win Vista Business.
I have all the drivers (TOSAPINS folder) that came with the original harddrive but when I did installed the drivers by following the correct order. i.e chipset, display, common modules, audio, modem and all other drivers.
There is still a little red x on the taskbar saying " No audio output device is installed" and also I noticed that the modem is not listed under device manager. I have also tried replacing a working modem card from a same model laptop but it is still not showing any signs of picking up the modem as well as sound driver.
I made attemp to download drivers from mytoshiba.com.au under the exact model and OS and installed but to no avail the problem is still there.
No sign of modem picked up and the little red x on taskbar still says " No audio output device is installed" and on device manager its not showing the audio or modem. there is also nothing in yellow exlamation marks and also I've tried to view hidden devices but still there is no sign.
Is there any thing else that I've missed out that I can try again?
WewakMaster

No I dont have the vista service pack and the internet speed at my end is too slow to download it.
So I have tried installing windows 7 but the problem still remains.
I have now removed win7 and have installed WIndows XP SP3 but there is still no sign of audio so Im stuck with win XP SP3 and trying to find solutions now.
I think the problem may have been caused when I upgrade the bios...and Im still looking for ways to downgrade the bios to its original bios to confirm this.

I have iphone 5. Have no sound and home button is not working pls help., I have iphone 5. Have no sound and home button is not working pls help.

My iphone 5 has just stopped giving any sound no ringtones, no key clicking or button sounds nothing at all. And the home button has stopped working. Has anyone heard of software 6.1.4 being corrupt Im just updating software at the moment to 7.1. If anyone can offer a pieace of advise would be much appreciated.
MANY THANKS
JAY

The iPhone warranty is not international and as you purchased in
Malaysia the warranty is only valid in Malaysia
You could try taking to an iPhone Authorised service provider
in India but there have been many similar posts to yours
and I am not aware of them assisting with an iPhone from
outside India

No sound and USB ports do not work.

Hi I have a HP Compaq SR5013WM I have a red x on the speaker no audio output device is installed I have reinstalled the driver over and over again checked the BIO download from Realtek ALC 888S, R2 57 and knowing has helped the Motherboard ASUS P5LP-LE Leonite GL8E 2 USB in the front 4 USB in the back any thing i plug in is unknown and will not in stall. PLEASE someone help.

Sorry I forgot to add that i have a Satellite A665-S6086.

Update causing video sound and keyboard light to not work, oh yeah and camera.

Drivers are missing for camera, graphics,keyboard light,and sound after update 10.7.3

Try SMC reset.
http://support.apple.com/kb/HT3964

My ipad has no sound and rebooting it is not working? Help please:(

I tried about everything

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing, Wall Paper, Sound etc will be reset

Sound and Vibration Toolkit License

Hi.. I have LabView 2009 SP1 installed in my PC. Currently I am running in evaluation mode, but planning to buy a run - time license. I also have the Sound and Vibration Toolkit on evaluation mode. Do I need to buy a license for this toolkit too? what if I buy the debug/deployment license for labview?

Hi JR Tager, as Dennis mentions you need to buy the license for each of your development computer. In this case the best option is to buy the Developer Suit with Sound and Vibration Option this way you get a discount in the module. Also the toolkit and the Module have to be the Same version than your LabVIEW for example if you are using LabVIEW 2010 you need the 2010 Sound and Vibration Toolkit.
Not all toolkits and modules, requires a Runtime but in this case the Sound and Vibration Module does. Which mean for every executable you create you will need to buy a RunTime License.The part number for the NI Sound and Vibration Software Run-Time License is 779875-01.
Which Software Requires a Run-Time License?
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

SOS(The Question of SVXMPL_Settled Dynamic Range (DAQmx) example in Sound and Vibration Toolkit)

The SVXMPL_Settled Dynamic Range (DAQmx) example in Sound and Vibration Toolkit only run one time.
How do it ? I want to run again and again.
Sorry, my English very poor.
Windows XP P
LabVIEW 7.1 P
Sound and Vibration Toolkit 3.1
帖子被jwdz在10-22-2005 11:00 PM时编辑过了
" 一天到晚游泳的鱼"
[email protected]
我的个人网站：LabVIEW——北方客栈 http://www.labview365.com
欢迎加入《LabVIEW编程思想》组——http://decibel.ni.com/content/groups/thinking-in-labview

Hi:
I have simulated PXI-4461 in MAX,but the SVXMPL_Settled Dynamic Range (DAQmx) example in Sound and Vibration Toolkit can not right run.
Windows XP P
LabVIEW 7.1 P
DAQmx 7.5
Sound and Vibration Toolkit 3.1
" 一天到晚游泳的鱼"
[email protected]
我的个人网站：LabVIEW——北方客栈 http://www.labview365.com
欢迎加入《LabVIEW编程思想》组——http://decibel.ni.com/content/groups/thinking-in-labview

Sound and Vibrate does not work at same time

Hi Support,
I have recently purchased BlackBerry Z3.
It does not support Sound & Vibrate at same time.
In Normal mode, I have enabled Sound and Vibrate but it does only give sound for incoming calls/messages.
(does not vibrate)
In Vibrate Mode, it does only vibrate.
This is the first time I am using Blackberry and I am annoyed with the basic feature not working.
Please respond.
Regards,
Sunil.
Solved!
Go to Solution.

I'm glad things are back to normal for you.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

I dropped my phone in a toilet, the sound and vibrate are working but the screen will not turn on, what should I do?

I dropped my phone in a toilet, the sound and vibrate are working but the screen will not turn on, what should I do? do I just need a new screen or what? I'm freaking out here

Don't freak out, just get over it. It's probably done.
What should I do if I drop my phone in the toilet?
Apple may offer you an refurbished iPhone in exchange for yours, for about half the cost of a new one.
I wouldn't be too specific about just how it got wet

HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

Since updating to 706 the sound on my ipad2 is not working right. On videos or music. There is constant distortion and what sounds like interference. Any ideas?

Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?

Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Sound and Vibration Spectral map not working in LabVIEW 2011

Similar Messages

Maybe you are looking for