Sound/audio is off for news/video clips Mac Pro , ML

sound/audio is off for news/video clips Mac Pro , ML

>certain clips
What ARE those clips?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project

Similar Messages

  • DVD/Lightscribe drive for new (late 2010 Mac Pro?

    Does anyone know a source for an internal DVD w/ Lightscribe drive for a late 2010 Mac Pro? I want to install it in the second drive bay. I got one from OWC, but the depth of the DVD drawer was about twice that of the original drive that came with the Mac Pro. It would have been able to fit through the drop cover on the front of the Pro, but would not clear the internal rack components. It fit in the rack nicely with the 4 screws lining up properly, but would then not open more than about an eighth of an inch before hitting the internal rack frame, causing it to close. Thanks.

    Bummer! The instructions included with the drive did not mention thi. When I called OWC customer service she said that sometimes you had to remove the bezel from the Mac. I told her the Pro had no bezel. She said that the drive info did not specifically say it would fit a 2010 Pro a d gave me a RMA.'nmh bad for not questioning further. Thanks.

  • Which SAS 15k rpm internal audio hard disk for new MacPro running Logic Pro

    For my new Logic MacPro machine, I'm planning to have a 7200 rpm drive for programs and a 300gb 15k rpm drive for audio.
    Are there any other drives out there that I could buy which are as good (and quite) as the £510 one that Apple supply, but for a little less cash?
    Cheers

    Save your money on the 15k drive.. You won't need it. The SATA drives are plenty fast enough, unless you are wanting to stream HD vision along with your session, in which case another drive in one of the spare SATA bays will kick along just fine.

  • Batch processing audio for separate video clips?

    Hi there, new to the forums. I have roughly 100 separate video clips that either I have edited and exported out of PPro or collected from other outside sources. The video clips were recorded in a wide range of environments, producing widely varied audio levels and sound quality. The videos are for a blog.
    I am hoping to create a batch process preset in Premiere Pro or Audition to normalize the audio in all of the video clips. My goal is to have the audio play back at the same volume level in all of them without having to edit the audio individually in each clip. I have been searching the forums for a while for help with a batch process solution like this. Running CS6 so have full access to all Adobe apps.
    I have played around with running the clip audio through batch processing in Adobe Audition CS6. Haven't had any success thus far -- the audio doesn't save within the same video file it was pulled into Audition from. I really would like to normalize the audio without having to re-import/-re-export each separate video.
    PPro group might be the wrong place to start, but figured I would start here. Is there a missing manual out there for doing something that seems relatively simple?

    Premiere Pro can't do this.  If Audition can't either, then you're probably stuck doing it manually.  Or at least, using non-Adobe software.  Possibly VirtualDub, depending on your source media.

  • How can I get Mail sounds to turn off for junk and other non-Inbox new mail?

    This week my Mail sound started going off for all types, incessantly, including receipt of the much Junk filtered out of the Inbox into Junk.  Formerly I received alert sounds only for new Inbox mail.  I have unchecked the "Play sounds for other actions" in Mail Preferences which does no good.  Any suggestions will be welcomed.  Thanks. 

    Did you install any software which includes or is a notification program such as Growl? Those may override any options you've set in the Preferences.

  • How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

    How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

    If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
    Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
    Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
    Here is a good Tutorial.
    If you have iMovie 08, let me know. There is a way to do it, but it is more complex.

  • TS3274 I don't hear audio when I play a video clip?

    I don't hear audio when I play a video clip while on FB or in my email?

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Problems With News Video Clips?????????

    In the past I have been able to watch news video clips on Fox and CNN. For some reason I can not determine, I can no longer do it.
    When I click on the video clip news story, the player pops up but the video does not load and play. I can not think of anything I have changed on my puter that would cause this.
    I use a G4, OSX 10.3.9, and my internet is with Direcway.
    Can someone please help me?
    Thanks, John

    Well, it seems as thought the QuickTime Player is working on CNN News Videos, but I still can not get the Free Video player to work on Fox News.
    All suggestions would be welcome. Thanks
    John

  • How do I display the complete time sequence for a video clip in iMovie?

    How do I display the time complete time sequence for a video clip in iMovie?
    I'm trying to create a movie for someone where they provided me the video clips and what time sequences they want extracted.  For example:  Video footage from time 5m22s to 9m:18s and 11m17s to 15m31s from the imported video clip.  I know you can select video but I cannot figure out how to select from those requested time markers.
    Any help would be apreciated.

    Open the file using QuickTime Player and then open the Movie Inspector window.

  • The sound doesn´t work for games, videos and music,

    the sound doesn´t work for games, videos and music, but it works if use my hearphones

    Hi mellidani,
    If you are having speaker issues with your iPhone, you may find the following article helpful:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Regards,
    - Brenden

  • What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

    What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
    Any help would be greatly appreciated! Thanks

    function(){return A.apply(null,[this].concat($A(arguments)))}
    bmiller0525 wrote:
    What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
    Any help would be greatly appreciated! Thanks
    thats way too vague of a question... best what?  quality? size? playback?
    best quality then use high bitrate, small size use low bitrate.

  • Which memory modules to use for upgrade 8 core Mac Pro

    I am planning to upgrade the memory in my new 8 core Mac Pro, I use it for graphics and video editing (FCS2), I am wondering what would be the advantages and differences between getting the 8GB upgrade in 2-pair of 4GB module or 4-pair of 2GB module, I know the price for the first choice is almost double the second.

    OK, so according to the http://www.barefeats.com/harper3.html Memory Tests, all slots filled means the fastest speed. So here's my question:
    I'm about to buy a 2,8GHz MacPro with 2GB RAM, and I want to upgrade to 8GB. I was considering buy an 8GB Kit from Crucial (629.99$), and either leave the original 2GB and add the 8GB to the free slots, or just take the original out and leave only the 8GB modules. And this would be my question before reading the Memory Tests article.
    So I went back to Crucial's online store and did some math, to see how much it would cost me to fill the remainder slots (6, counting off the 2 used by the original RAM) with 1GB modules, instead of my previous idea of 8GB (2x4GB). So, a 2GB Kit (2x1GB) cost 127.99$, multiplied by 3, which is what I would need to achieve a total of 6GB, to add to the original 2GB, will cost 383.97$.
    That's 246$ less than the 8GB Kit! And according to the Memory Tests, even faster.
    Isn't this too good to be true? What's your word?
    Thanks a lot.

  • New imac vs mac pro

    Apologies if this is going over old ground.
    I'm finally ready to upgrade/replace for Power Mac G5. It's been a loyal and reliable servant (apart from a blown graphics card this year) for 7 years, but it's time to retire.
    I mainly use FCP & DVDSP with HD footage and increasingly Motion to produce short promos and corporate videos.
    Although, my G5 does the job - it's now very slow rendering HD footage and Motion is almost a non-starter. Running concurrent applications is a painful and nosy experience.
    So to new investment. With the obvious upgrading limitations of an imac, how long will it last before needing another upgrade? I'd be happy with 4 years
    Or is the added expandability of a Mac Pro worth the extra cash?
    I dare say either will blow me away at first.
    imac
    2.7GHz Quad-Core Intel Core i5
    4GB 1333MHz DDR3 SDRAM - 2x2GB
    1TB Serial ATA Drive
    AMD Radeon HD 6770M 512MB GDDR5
    £1399 incl vat
    mac pro
    One 2.8GHz Quad-Core Intel Xeon “Nehalem”
    3 GB (3 x 1 GB)
    1TB 7200-rpm Serial ATA 3Gb/s hard drive
    ATI Radeon HD 5770 1GB
    One 18x SuperDrive
    £2041 incl vat
    (Obviously also need a good monitor)
    Ae there benchmark tests available to compare these two machines?
    What say others in a similar position? Which would you go for?

    New iMac has Thunderbolt, so you'll be able to edit from super fast Thuderbolt drives then they start shipping in about 3 more months.  For now you're stuck with FW800 drives which really aren't ideal for HD work.  But don't expect Thunderbolt drives to be cheap, not nearly as cheap as internal SATA drives for a tower.
    Mac Pro allows you to install better, more powerful grahics cards that will let Motion, Color (and soon FCP X) run better, and you can get more CPU cores (which will impact FCP X, and the next version of FCStudio in beta testing).  You'll also be able to add much less expesive internal drives (2TB for not much), which will be fast enough for working with FCS apps.
    Either way, you want the most number of CPU cores, fastest CPUs, 8GB RAM, and two 7200rpm drives.  You need a second drive as your scratch drive for sure.  Best graphics card you can afford.
    While I was at NAB, a few companies said they were looking into developing a Thuderbolt PCI card for the current Mac Pro towers.  But I'm sure those will be some time before we see them.
    Hint, don't get RAM and drives from Apple, go to OtherWorldComputing (.com) and get them much cheaper.  Super easy to install, and they'll give you clear directions for doing so.  Top notch customer support, also.

  • Could someone suggest a procedure describing how I should migrate my iTunes files from old an older Motorola-based PowerMac to a new Intel-based Mac Pro?

    My problem concerns migrating, or moving my iTunes files from a Motorola-based G4 PowerMac OS X 10.4.11 iTunes 9.2.1 (4) to a new Intel-based Mac Pro running OS X 10.8.4 iTunes 11.0.4. 
    Context Summary:
    1.  Migration assistants on my old and new macs are not compatible. 
    2.  My older mac has my iTunes library stored on an external firewire disk. 
    3.  Part (but not all) of my iTunes files are also resident/stored on my iPod classic.
    4.  Finally, I need OS X 10.4.11 on my old mac and cannot upgrade it to OS X10.5.
    Proposed method A: Is there a way to transfer my playlists from my Motorola Mac to my Intel Mac?  If so, could I then connect my external firewire disk (containing my iTunes library) to my new mac, and then tell iTunes (on new mac) to use my iTunes library located on my external firewire disk? 
    Proposed method B: Would my chances for success improve if I used my iPod classic to transfer iTunes files from old Mac to new?
    Worst Case Proposal C:  I could start from scratch and recreate iTunes playlists and library on new mac.... time consuming proposal but it's possible.  (Please don't suggest this proposal unless no other viable choices exist for me.)
    Or have I missed something?  Is there another procedure I should use?
    Please advise, and thank you.

    Hello Chris,
    Answer to your iTunes library question:  By iTunes Library, I mean my iTunes Media folder only; not the entire /iTunes/folder with iTunes media folder inside.
    BTW: Your pointer to ht4889 was very helpful, and sharing the folder, then copying it over firewire interface from old to new mac was most useful.
    However, now with my entire iTunes folder (including iTunes media folder) moved to new mac, I remain unclear as to how I should configure iTunes on the new mac so that it can know about and use these copied files.  I understand using iTunes preferences, how to point iTunes to my media folder, but don't know what other iTunes operations are necessary for iTunes to pick up where I left off with my old mac.
    Is there any file conversion necessary? 
    Or inside iTunes, should I:
    File->Library->Organize Library?  or
    File->Library->Export Library?  or
    File->Library->Import Playlist?
    Please advise and thank you again for your help. 
    As you might imagine, I put a great deal of time building my iTunes library, and would feel very blue if I need to build it again from scratch on my new mac.
    So long for now.

  • Illustrator CC 2014 running EXTREMELY slow on brand new 6 Core Mac Pro with 64Gbs of Ram. This can't be right :(

    Hi,
    I've just picked up a brand new 6 core Mac Pro and I am having some serious lag issues with Illustrator CC 2014. I am just trying to select relatively simple objects (an illustration of the side of a coin) and there is a massive delay between when I click on an object and when it actually becomes selected.
    Someone please tell me they know how to fix this? Please

    after the two fixes above in illustrator cc Im still experiencing
    file open - nothing happens
    file place nothing happens
    fix - quit illustrator and restart - open file from the folder lol
    PS CC
    A wierd warning popping when I want to open a file nothing opens just the warning
    fix quit out and start again
    for those of you out there in yur 40s and this is your career you started like me on photoshop 2 or 3 on an lc 6/100 60 and even on the quadras lol
    this is the first time Ive had seen so many bugs in adobe software
    why I bought it the curve tool astute dont have a curve tool and I work alot with them and the funky title branding it looks cool visual consumer glutton lol
    so yeah now going to look at how to stop my monthly subscription  will proabably have to go to that forum next lol
    an d evert back to CS6 im outputting to many jobs to have these hold ups

Maybe you are looking for

  • Airplay in classroom

    I have a class set of iPad2 and just bought apple TV for the airplay function. How do I convert HDMI to VGA to sync with classroom projector? Anyone know of a converter from HDMI to VGA or RCA?

  • X Axis Ranges - custom XML - it doesnt work

    Hi - I am having difficulty displaying an axes range on the X axis. I have a line chart displaying volume data over a 2 month period, and I want to shade saturday+sunday in grey as vertical stripes accross the chart- to indicate that the data points

  • File error message when rendering

    hard drive replaced by apple. now when i try to render a previously uploaded video in fce a pop-up says: "file error: access denied." what does this mean? something to do w/ them? how do i get "access" to my file again? never had this problem again.

  • How to remove whitespace in deamweaver in design view?

    m having this issue which is driving me crazy. when am looking at my code in design view in Dreamweaver, there is a space below my nav bar like this..... I do not understand how to get rid it? but it doent show in live view or the browser..... Edit f

  • Performance Management Plan - Customization

    Hi This is regarding the Performance Management Plan in Oracle Performance Management. Currently my client uses a custom concurrent program which creates appraisals by calculating the job anniversary date. The client is using yearly appraisal. But th