Sound blaster 24 bit external (cracking)

Hey guys, i've recently reinstalled my 24 bit sound blaster as i noticed there was an update to make it compatible with windows 7. It's kinda working fine but my front left speaker is cracking/sometimes not playing at all. Any suggestions?
Also when i do the surround test my front left speaker is VERY quiet compared to the rest. Thanks

Hi.
Creative as an Audio Center to download for sb live 24 external soundcard, and they say this application restores the Line in monitoring function (that's what you want).
But it doesn't work!!!
I had the same issues and here is Creatives support team reply to my emails:
"Our Advance Support Group has confirmed that the Line in Monitoring
feature isn't supported under Vista with Live 24 Bit External.
Sorry for the inconvenience caused."
So my solution was to give up Windows Vista and install Windows XP on my laptop.

Similar Messages

Please Read this ! USB Sound Blaster 24-Bit External : The Story of the endless problem

In order to keep the good behavior here (I`m really pissed off !) I just?want to tell you something (this is ESPECIALLY for all the guys from the stuff)?Before 2 days I`ve decided to buy a new sound system for my room. I bought myself Creative Inspire t600 5. surround system. Cool. I was very happy. I?needed only to buy a sound card?working with 5. because I have a notebook DELL INSPIRON 50 who has only 2 canals. So in order to be everything beautiful I gave $70 for Usb sound blaster 24-Bit external. And from that time the problems began. In short :? I was using Vista but I found out that it wont work with this soundcard. The first problem : Didn`t identify the device. I tried with several drivers... Nope. No sound card with Vista.(This problem seems to appearance with many owners like me)?I pluged the usb soundcard in my old pc running XP and it worked . PERFECTLY. So I removed Vista from my notebook and intalled XP. This took me whole day to rebuild all my software. Finally it left to set up the sound drivers. The cherry of the icecream. Aaaaand ..... **bleep**. When I play?any track it CRACKLES. Again problem appearanced with many here. I tried to find out here what is the problem but unfortunately as u can see my english is quite bad?so I cant understand?what I need.I really like Creative but if they cant manage this problem I will?no longer buy their stuffs??JUST PLEASE SOMEBODY ANSWER ME IS THERE ANY SOLUTION FOR THIS OR NOT. I JUST WANT STRAIGHT ANSWERPS : Please do not delete my post. I know there are plenty like this. I dont want this crackles

well ?

Windows Vista - Sound Blaster 24 Bit Usb - No Microphone Playback Real Time Kara

Hi,
I don't no if this problem was just discussed in another thread, if so please giveme simply the link...
I'm Italian, so sorry for my poor english or bad translation...
PC: Laptop, "Toshiba Satellite A 200 24E"
OS: "Windows Vista Home Premium Service Pack " - All update done.
Dev.: "External Sound Blaster 24 Bit Usb" - Driver downloaded from Creative Web Site
At the very beginning I tried the internal Sound Card (Realtek) to do karaoke in spare time, but couldn't hear anything coming from Microphone. So I tried to buy an external sound card. The result is the same.
On "Record Device" I can see the Microphone Device, the level is on top, when I speak in the microphone I can see the green bar light up, if I record my voice I can hear myself when I playback, but no sound in real time.
I read that a lot of people have similar problems, but everone solves in a different manner...
I tried:
- I read in other forums advices about to do something like unmute microphone on "Audio playback devices" >> "Speaker" >> "Levels", but I don't see any checkbox, I can see only Speaker Level Bar...
- As read in other websites, to add a registry key (something like EnableInputMonitor in a specific path), but nothing changes. I cannot find other Device, not in Playback Devices, and not in Record Devices.
Please help, all was great with the same microphone, on old Packard Bell Laptop, old Sound Blaster mp3+ usb, and old Windows Xp.
If no solution, I 'm going on buy an old laptop with Windows xp, or an external Mixer, but I'm disappointed on spending more money...

well ?

Sound Blaster Live! External ...Where is my softwa

I use the CD to install the drivers...ok.
I use the CD to install the software...ok.
I go to configure the speakers start/programs/creative/sound blaster li've! external 24 bit/ EMPTY!
Yeah...so I uninstall..and do it again. Nothing. So now my 5. system, is a piece of crap 2 speaker (un-configrued) waste.
Support? Nothing on the site that can help. Cant even download the setup from the site.
Any suggestions?

?Hi Pudi,
MS USB audio class driver is the driver that gets loaded for any USB audio device by default if you did not install any drivers that is provided by the vendor (in this case, Creative). To try this, you can do a full uninstallation of creative software for the Sound Blaster Li've External 24bit, then connect the hardware to your laptop again after that. The driver that will be loaded at this time would be the MS USB audio class driver. If you know how to look at driver publisher in device manager for the Sound Blaster Li've External 24bit, then you can also check that the publisher of the driver is Microsoft and not Creative if everything goes well.
Once you managed to do this, if you still have the same problem, then I would think that it is a compatibility problem with your laptop. For such cases, you can try to use a self-power USB hub in between the sound card and your laptop. This might help.

Creative Sound Blaster 24 bit l

Please Can You Help?creative sound blaster 24 bit li've will it work on my xp as it states that i have to have XP (SP) and i have got xp sp2?thank you.

Thank You Stormy3
I will go out and buy it, when?I was on windows 98?I had the creative sound blaster 28can?I get one for my xp instead of sound blaster 24 bit li've?

Sound Blaster Live 24bit External (5.1) Mic-In / Line-In prob

Hey, here's my setup:
Virtual DJ Console Edition (3.4. updated)
Hercules MP3 Console
Creative Sound Blaster Li've 24bit external (5. card, using it as a 4. to get FRONT out to speakers and REAR as headphone queue)
I need to broadcast using Shoutcast (the VirtualDJ internal broadcasting plugin wont allow to set up full details that SHOUTcast plugin for Winamp allows you to fill in.... i.e. Yellow pages etc etc)
The problem is basically that when I'm using SHOUTcast for Winamp, it streams both my FRONT and REAR outputs, can't seem to choose for it to stream only FRONT...
Now, I know I can send the FRONT to Line-in (and use a stereo Y splitter to get the sound also to my speakers), but then it seems my Sound Blaster li've disables my Mic-In... seems that it has shared Line-In and Mic-In even though they are separate holes in the box....
so basically wondering if anyones got any suggestions as to how to be able to Broadcast only the FRONT output and use the Microphone... now it seems its either I can't use the Microphone when doing a radio show... or alternati'vely I can't use my headphone queue...
I don't understand why would the card have a separate Line-In and Mic-In, but you can't use the Mic-In if you have something hooked in the Line-In? Could there be some software or driver update I could get to be able to do this? Or am I just having forced to buy something like an M-Audio card thats exactly the same, but doesnt share the Mic and Line-ins but lets you use both at the same time?
Thanks for any suggestions! They are most welcome!

at drivers?
IF you mean those third part yASIO drivers they limit to 6 bit recording whic hisn't an issue wuth Acid pro, it's the bandwith and asio offset. DO you ahve a link?

Sound Blaster Live 24bit External

Would a Sound Blaster Li've 24bit External work as a soundcard for my Logitech X-530 5. system? I'm looking for something to upgrade my crappy intergrated soundcard.

Yes, it will work. It'll wind up setting your USB ports to 6 bit by default, because it's going to be taking alot out of them, but it'll give you some beefy surround sound none the less. On the down side of this external card though, it's giving me a ton of **bleep** about ventrilo and fra
ps.
:/About to make another topic pretaining to that ina few though.

Connecting a mixer to sound blaster: live 24bit externa

Iv got some dj decks, and wanted to record my mixes to my laptop, so i saw the external sound blaster li've and thought that would do the trick. But it turns out that it is alot more complicated than?i thought. First of all, it took me ato install everythnig without something going wrong, but all the driver (for vista) seem to be ok now. Once installed, i connected a 3.5mm jack into the line in, on the soundblaster, and conncected the other end to my mixer. That all done, i went onto the recording programme that you get with the sb, but here is where it goes wrong the message 'there is no audio device on the system, the application will now close' comes up. Of course this stops me getting onto any of the programmes, and stops me from recording. After this i checked on control panel/device manager, and it said that everything was working correctly, but on another page it says 'cannot find hardware connected' although the blue power light is on. I have now run out of ideas of what to do, so any help would be great.

Iv got some dj decks, and wanted to record my mixes to my laptop, so i saw the external sound blaster li've and thought that would do the trick. But it turns out that it is alot more complicated than?i thought. First of all, it took me ato install everythnig without something going wrong, but all the driver (for vista) seem to be ok now. Once installed, i connected a 3.5mm jack into the line in, on the soundblaster, and conncected the other end to my mixer. That all done, i went onto the recording programme that you get with the sb, but here is where it goes wrong the message 'there is no audio device on the system, the application will now close' comes up. Of course this stops me getting onto any of the programmes, and stops me from recording. After this i checked on control panel/device manager, and it said that everything was working correctly, but on another page it says 'cannot find hardware connected' although the blue power light is on. I have now run out of ideas of what to do, so any help would be great.

Can Sound Blaster live 24bits external work at usb2

hello!
my pc work with usb2.0 and i would like to know to now if usb. connection of sound blaster li've 24bits, can work at 2.0 or, if there are any update that make it work at 2.0?
i would appreciate a answer.
thank you.Message Edited by jhonyy00 on 2--2005 09:02 AM

i appreciate the answer <SPAN class=title_big>Leekay07 , but even so, i?m making some music with FL STUDIO ; and plug-ins like AMPLITUBE; DSOUND and also recording guitar in real time with some effects.
In favour of quality sound and protection to the speakers it is not necessary a fast connection than usb .
does not usb . connection lose speed to transfer data for the purpose i describe, comparing to PCI card?
My pc has AMD athlon processor at 2.8Ghz and 768Mb of RAM and logitech X-530 5. speakers.
Thank you very mutch.Message Edited by jhonyy00 on 2-4-2005 09:3 AM

Sound Blaster Live! External Questi

Im planning to buy one for my 5. speakers that arent being used at all (im on a laptop). I also want to buy it so that i can use my PS2 with my 5. speakers. I know that the SBL!e has an Optical Jack. Will i be able to plug in my PS2 through its Optical Jack to the Sound Blaster Li've! optical jack? or if i use its Line-In, will i get use of my speakers(in surround sound, or etc,)? and advice will help.

er a dell latitue D60

Sound Blaster Live 24bit External - No B

I am hoping that someone can help me here. I am running Windows Vista Ultimate and have my PC setup purely as a Media Center machine. It has an onboard Intel 5. Sound Card that was producing average sound, but works 00%?I have since installed my Li've 24bit External, I first ran the CD and then realised that it was not Vista software so I downloaded the updated drivers and software. First I removed the old software and then installed the newer version. Now everything seems to work and when I test all the speakers via the?drivers / control panel?they all work - including the sub. When playing anything via Media Center or Media player, I get no bass what so ever. - I have even tried 5. DTS DVDs?I have subsequently plugged the speakers back into the onboard card and the sub works. Any suggestions?Thanks in advance.

Yes, it will work. It'll wind up setting your USB ports to 6 bit by default, because it's going to be taking alot out of them, but it'll give you some beefy surround sound none the less. On the down side of this external card though, it's giving me a ton of **bleep** about ventrilo and fra
ps.
:/About to make another topic pretaining to that ina few though.

K8N Diamond SLI Creative Sound Blaster 24-bit

I have a problem with My MSI K8N diamond SLI 's integrated Creative SB 24-bit sound.
The sound is unaffected by the speaker configuration in control panel>sounds and audio devices>advanced.
For example when playing a 6 channel sound through my stereo speakers, the center channel does not get split between front channels. This means I can hear no voices as they are only on the center channel!
Can anyone with the K8N Neo4 platinum or diamond sli confirm this or does anyone know a solution?

If it is a grounding problem it would be within the PCB of the motherboard, the wiring there that either are not connected directly to ground. Or the problem that a ground plane / trace runs to close along a signal trace, causing induction of a signal to what should be a no-signal ground.
As you say, a lack of voltage could also be the problem, if the powerfeed to the chip is fed from the same source as the IDE (as it correlates with IDE activity). Any rapid drops in Voltage (voltage spikes) could result in just the phenomenon as we hear it and as I measured it. But it is less likely than a ground related problem. If there was such a load on the trace to deliver voltate to the chip and some other component, that the voltage would drop, we would see this on the motherboard. The amps would spike and we most likely would have seen a burned out trace.
So it is more likely that there is a matter if impure voltage feed to the circuit. But this is also much less probable than the ground issue. It is not uncommon to get ground issues in audio circuitry, especially in applications and environments where you have PCB traces in which high frequency signals travels close by. (a phenomenon not only contained to audio circuitry, as you probably have seen motherboards with traces run in circles, to get rid of similar problems).
I would not blame creative for this. I have had to deal with many soundcard issues in 10+ years as a computer tech. And I will leave it at that. I have much more to say about the quality of MSI products than the quality of any soundcard from any manufacturer, but that is also something that I will not rant about here.
If you do not get it to work with a stand alone sound card, I would check your PSU so that you do not have any bad or impure voltage there (measured with an oscilloscope, if you know what you should look for during load). I would also check so that the computer really are attached to a grounded outlet to reduce problems with interference. Third I would place the soundcard as far away from the GPU/s as possible (a good source for interference).
In my experience, only soundcards that has been faulty has produced similar sound issues as this motherboards onboard sound produce. Especially bad caps (do not even have to be the leaking kind) tend to induce this behaviour.
But the last part is something I have ruled out on this motherboards onboard audio. If there were bad caps there would be telltale spikes in the the measured signals and voltages. There are none (except for previously noted discreprancy in the output signal when accessing IDE).
I do not have a reciever, so I can not try the Spdif out, to see if that works as it should or not.
Also, I have not tried to remove the IDE devices and use only my SATA drives to see if that removes it problem (I guess it does, but that is a bad solution).

Trouble with sound blaster 24 bit l

i recently had problems with my internal soundcard i bought a soundblaster 24bit li've soundcard and installed and made sure my old soundcard was disabled but i still have the same problem of the sound not workin and programs such as windows media player sayin there was a problem with the sound device
I am using a windows xp home edition with a pentium 4 processor
I used the diagnostics to check the soundblaster card was working but i got these results:
hardware detection: pass
wave driver: fail
MIDI driver: fail
mixer driver: fail
directsound 3D driver: fail
mixer setting check: fail
can anyone help me with this problem? I reinstalled the software and driver but it did not work

marky,
Have you try those uninstall and reinstall steps (Standard Troubleshooting) mention in the FAQ sticky above. If not, give it try.
Jason

SOUND BLASTER 24 Bit L

hey guys i need the driver or CD ISO for my , thats the one that has sorround meixer on it thank you

http://forums.creative.com/creativel...mp=true#M65078

Sound Blaster 24-bit! live Vista Beta2 driver works for Vista RTM vers

I just find out today. The .

How it works?!
Enable cmss3d? and digital signing? and about 7. and 5. systems? Tell us more!!

Sound blaster 24 bit external (cracking)

Similar Messages

Maybe you are looking for