Sound blaster 5.1 Live! 16bit Windows vi

Where do i find sound blaster 5. Li've! 6bit drivers for windows vista? i installed its driver from cd but that is only for win XP and i only hear the front speaker left and right ... what should i do ?Message Edited by quard on 02--20072:9 PM

I don?t know if work in Vista but in operating system say Vista, you can try.
Sorry for my english.
NGOHQ Creative Modded Driver:
Size: 23.4MB
Hits: 5947
Author: Creative & Regeneration
Description: Modded Driver for SB Li've! & Audigy I
Operation System: Windows XP/2000/2003/Vista
http://www.ngohq.com/home.php?page=F...&dwn_cat_id=20
Message Edited by Rad-Wulf on 08--2007:54 AM

Similar Messages

I need a driver for sound blaster 5.1 VX for windows 7

Hi , i installed the vista driver in compatibility mode ?for my sound blaster 5. VX in windows 7 but i got a blue screen and in device manager there's a yellow exclamation mark in " multimdedia audio "?stating that no driver is installed . Please can someone give a link to download at least a compatible driver or basic audio . Thanks .

Hi daniel_k , the driver works fine but there's a little problem : when i reboot , the startup process stops at about 50 percent (stops responding)?, when i launched the startup repair utility which takes about 0 mins to complete , then the pc boots normally?. When i look in device manager , it says my sound card?has no driver installed?but when reinstalling your driver it's ok again ! The main problem is when i restart ! Please note that i reinstalled windows 7 and performed a clean install of the driver as you requested before this problem arises . Please?can you fix the driver or give another one . Thanks .

Please help whit sound blaster 5.1 Live 16 bit in windows vi

Where do i find sound blaster 5. Li've! 6bit drivers for windows vista? i installed its driver from cd but that is only for win XP and i only hear the front speaker left and right ... what should i do ?

ok i found my directx program and opened it and did sound test and other tests and it says theres no problems found .
so this leads me back to my problem i stll get the error message saying that MY SOUND CARD CANNOT BE DETECTED ON MY SYSTEM . PLEASE MAKE SURE YOU SOUND CARD IS PROPERLY INSTALLED ...
i went to creative to do the autoupdate install so it would auto check my system and i get a error message saying theres components that are corrupted and it closes and does nuthing ..
and everytime i try to do an update i get the no sound card error message so im back to square ,
i have done everything i can possibly think of and also everything the techs told me to do nd this **bleep** still dont work and i still cant use any of the features that came on the disc (i.e.) diagnostics and others etc.etc.etc.
my only conclusion is i have a deffecti've sound card ..........unless someone can think of a miracle fix i dont see anything else it could be
Message Edited by theviper on -06-2005 :00 AM

Sound blaster 5.1 live! 24bit probl

Hi all, i am currently havin some problems with my sound blaster 5. li've! 24bit sound card. I just updated my driver. It seems that with the new di'ver, the 0077, when i play some aduio on windows media player and i put in a game cd or any cd that has audio, my windows media player gives me an error. I had no problems with the previous 0076 driver on this issue. And also when i play any audio and i open another window or page anywhere on my pc my audio starts making crackling and distortion?noises. Is there any fix for this or does anyone know any solution to this issue? I would greatly appreaciate any help. I?am using Windows Vista Ultimate 32bit. Cheers

Hello,
I've got a 5. system and a li've!24bit too, but I've got no problem. In the eax-console, select surround-mixer, and click on advance, you can adjust the volume of the speakers seperatly, doesn't this help?
Grtz

Sound Blaster 5.1 Live Ls card with a durabrand home theater sys

Greetings All
I have a sound Blaster 5. Li've Ls card
And just bought a durabrand home theater system with a sub wolf and 5 speakers it has a port for pc?s but I all I hear when I plug it into the digital out is very faint sound with a lot of static I know that the papers that come with the sound card suggest creative inspire 5. digital 5500 however it does not say that it will not work with other speakers.
But none the less I am asking you all what should I do and is it the speakers or is there something else I got to do?
I plugged it into the normal speakers out and worked of course I the digital output was unchecked when I did that.
So what do I do
i have windows xp pro sp2
Thank you all

scrach everthing I got in contact wiht the HT and they told me that the one i have has no digital sound.
now i would like know how mutch dif is there in it and will i not be able to enable 3d sound on pc's wiht out it's

Can I work 3 pci creative Sound blaster 5.1 card in windows Xp and

Hi Guys,
Please help me to configure 3 pci Sound blaster 5. card in windows Xp . I want to work simultaneously .
Regards,
Chrisdee

Hi,
I don't think this is possible though I do seem to remember one user running multiple cards and creating a web site with his experiences. Personally if you are looking for multiple i/o's i'd take al ookk at some of E-MU's offerings.
Hope this helps,
John

Computer Crashes with Creative Labs Sound Blaster 5.1 Live Card

Several weeks ago when I booted up my computer a msg apeared saying new device found(the sound blaster card mentioned in the title) even tough it had worked for months beofre then and even the night b4. Shortly after I get a beep from the mother board and the computer crashes several seconds after start up.
I thought maybe their could be some conflicting driver issues or something so I checked the BIOS and it said the onboard sound was disabled. Restarting the computer several times it kept crashing. I removed the card, booted up the computer and everything worked fine (except the sound) and it did not crash. I tried putting the card in the other PCI slots thinking that was the problem but it crashed each time.
Right now the card it ploped on the desk and I have the Creative 5. speakers running off the onboard card on my Is7-E mobo but the sound is **bleep**ty as hell and the speakers are ligned up corectly and I am having all sorts of trouble with that. I am getting basic sound though. I havnt had time to pursue the matter untill now. Do you guys think the card for some reason is damaged or Its an issue on my computer Crashing it's
Thanks,
-Mark

Heh, srry about using the S word. Ah, I whiped all the audio drivers etc...from the guid in that link. I poped the card in, booted up the computer...alas it still crashed. So now I have to get my temp sound working again. Is their anyway to tell if a compenent is phsicly dmged? I can not be shure if this is a software issue(which I dont think it is because I followed your whipe guid) or a hardware issue. I dont understand what could of hapened to it, it simply stoped working. Im not shure why my computer crashes at start up as mentioned above and doent simply not work. Any more thoughts would be great.
-Mark

Creative Sound Blaster Audigy2 ZS freezing in windows 7

Hello to all Ceative sopporters, i have a problem with my Crati've Soud Blaster Audigy2 ZS, Sound is good im SB but all Sofware freezing every time when i am using eq Eax console Speakaer settings and other i can't remember so i need maybe patch or fix. any knows what i can do? ?

I re-used this Creative Audigy2 Platinum for my new built PC on Window7 64. Now on the new desktop; the rear or front panel plug-in is working fine for both microphone & headphone (I used same handheld Shure SM58 on the old PC, also Window7 version), but through headphones or speakers only. Unfortunately, in the Control Panel/Sound, the "What You Hear" or "Microphone" icons is there but it said "Current Unavailable". With that, I can't not mix my sound for recording or talk/broadcast live over internet. Please help! Thanks a lot

Sound Blaster X-Fi I/O - Windows 7 RC - Microphone jack not working

Hey all,
I've recently installed the Windows 7 RC and am running the Beta drivers on it. I have a weird problem with it where the Microphone jack is being recognised as line-in, but all of the controls for the actual line are in the microphone properties. For instance, I can enable the +20dB boost, which will affect the sound coming through line-in, but it still won't recognise the actual Microphone.
Any ideas why this is? Previous behaviour in Vista was that the Microphone jack was recognised as one and I could control the recording settings from there...

Sorry fffcmad,
Everything you said in your post does not apply to the Titanium.
The mic shares the line-in on a channel called FlexiJack. There is a tab in the "Settings" window in which you can switch between the two. You can find that window by opening the "Game Mode" window and click "Settings" on the bottom of that window. However, the problem is that mic detection is very unstable and you have to have luck to get it to work. The next step is to select the "Microphone" channel by clicking the arrow above the right-most fader in the "Game Mode" window. However, for some odd reason that option often fails to popup there. Often you'll find "Microphone FP" (note the "FP" in the name and it stands for "Front Panel") which is only available in the version with the front panel! The FlexiJack one is called "Microphone" (with the "FP" in the name). Rebooting might help, but often it doesn't. Changing input devices and changing them back might work, but often it doesn't.
Also, the Titanium has no mic boost. That is a real problem, because the mic volume is extremely low.
The short answer: The Titanium's drivers are unstable.

Creative Sound Blaster Arena Headset HS-1100 Windows 7 Volume Too Loud

I have a strange problem with my Creative Arena Headset. The volume level of it is too high.
To avoid hurting my ears, i have to set the master volume in the windows mixer to 4/00, this causes a problem when running other applications and adjusting volume. For instance, when running skype, the volume control within the application is literally either "off" or "on" and I can often here every bit of buzzing and background noise that I cant hear through my speakers seperately.
Also, because the volume has to be set at 4/00, the feature in windows to automatically adjust volume levels of applications doesnt work, so I cannot use the feature of automatically lowering the volume of music when chatting online.
This poses an annoying problem i have tried to resolve for a while now (ever since I have had this headset).
I am running the latest drivers from your download site: XFHP_PCDRV_LB__0_000 on the Windows 7 operating system.
I have also reinstalled the drivers and tried the headset on a different computer and it results in the same massi'vely loud volume.
Is there any reason my headset is so loud? Is there anything I can do about it?

@Dodgetimmy,
Can you try reinstalling the headset using the driver from the installation cd? You might also want to try using the generic drivers by simply plugging the headset to the PC without installing the Creative drivers to see if it makes a difference.
If it is still not working for you, Customer Support can be contacted using this email form.

Can't install Sound Blaster live 5.1 on Windows XP machine

Hi,
I've been using?Sound Blaster Li've! Platinum 5. on my pc running Win ME for years. I've just formatted the PC and installed Windows XP Professional on it and now when I try to install Sound Blaster from the original installation CD, I get the error "Sound blaster li've 5. is incompatible with this version of windows". It still allows me to install but then I get all sorts of errors when playing back audio files etc.
I've now?re-installed XP but obviously can't use Sound Blaster and I would really like to!
I'm a musician and not?technically minded?at all so any ideas would be greatly appreciated.
Thanks - Abrie

>Re: Can't install Sound Blaster li've 5. on Windows XP machine: Hi Abrie,
Is your sound card was preinstalled or was it come in a retail box?
If it is a retail version then you get the driver and applications (Win XP Professional 64 bit) from the below link.
http://support.creative.com/Products/ProductDetails.aspx?catID=&subCatID=206&prodID=572 &prodName=Li've! Platinum 5.&subCatName=Li've!&CatName=Sound+Blaster&VARSET= prodfaq:PRODFAQ_572,VARSET=CategoryID:
Please copy the entire tag (entire 2 lines)?above and paste it in the web browser and hit entre.
Please let me know whether it works fine or not.
Cheers
AW

Windows Vista - Sound Blaster 24 Bit Usb - No Microphone Playback Real Time Kara

Hi,
I don't no if this problem was just discussed in another thread, if so please giveme simply the link...
I'm Italian, so sorry for my poor english or bad translation...
PC: Laptop, "Toshiba Satellite A 200 24E"
OS: "Windows Vista Home Premium Service Pack " - All update done.
Dev.: "External Sound Blaster 24 Bit Usb" - Driver downloaded from Creative Web Site
At the very beginning I tried the internal Sound Card (Realtek) to do karaoke in spare time, but couldn't hear anything coming from Microphone. So I tried to buy an external sound card. The result is the same.
On "Record Device" I can see the Microphone Device, the level is on top, when I speak in the microphone I can see the green bar light up, if I record my voice I can hear myself when I playback, but no sound in real time.
I read that a lot of people have similar problems, but everone solves in a different manner...
I tried:
- I read in other forums advices about to do something like unmute microphone on "Audio playback devices" >> "Speaker" >> "Levels", but I don't see any checkbox, I can see only Speaker Level Bar...
- As read in other websites, to add a registry key (something like EnableInputMonitor in a specific path), but nothing changes. I cannot find other Device, not in Playback Devices, and not in Record Devices.
Please help, all was great with the same microphone, on old Packard Bell Laptop, old Sound Blaster mp3+ usb, and old Windows Xp.
If no solution, I 'm going on buy an old laptop with Windows xp, or an external Mixer, but I'm disappointed on spending more money...

well ?

Sound blaster for windows

I am trying to install sound blaster (CT480 card) into a windows 98 machine. It is giving me an error message of (DevCon DLL not in correct folder). Can anyone help with this error message or direct me to a better driver download... or a patch.
Thanks,
Dan

Masoudi,
If your Sound Card is actually an onboard card, then your best contact for drivers for it would be your motherboard manufacturer. These cards are different from our retail cards and use drivers that were made for them.
Jeremy

NEED HELP with Sound Blaster 5.1 digital LIVE! IM FED UP WITH THIS PEICE OF JUNK SOUND C

yes i installed the Sound Blaster 5. digital LIVE! into my system and i got a new updated installation cd from creative and everything .. now heres the problem everytime i try to do an upgrade or download stuff from creative i always get an error message sayin MY SOUND CARD IS NOT INSTALLED .. but everything on my computer says it is installed and working properly .. so what the hell is going on ??? im a first time buyer of creative products and i purchased this from word of mouth on how good it was and i tell you what this sound card is a peice of **bleep** ... i have never in my life had such a problem installing something .. well i cant even use diagnostics cause i get the same message " MY SOUND CARD IS NOT INSTALLED ... i have tried uninstalling everything and so for and still nuthing .. i get sound through it but i cannot access any of the features from the cd or upgrade any of the drivers or anything .. SOOOOOOOOOOOOOOOO WHAT AM I SUSPOSED TO DO ?? IM ALSO GOING AS FAR AS SENDING THIS BACK TO CREATIVE FOR A REPLACEMENT CAUSE THIS CARD HAS TO BE DEFECTIVE .........ANYONE WITH SOME ANSWERS PLEASE LET ME KNOW ?

ok i found my directx program and opened it and did sound test and other tests and it says theres no problems found .
so this leads me back to my problem i stll get the error message saying that MY SOUND CARD CANNOT BE DETECTED ON MY SYSTEM . PLEASE MAKE SURE YOU SOUND CARD IS PROPERLY INSTALLED ...
i went to creative to do the autoupdate install so it would auto check my system and i get a error message saying theres components that are corrupted and it closes and does nuthing ..
and everytime i try to do an update i get the no sound card error message so im back to square ,
i have done everything i can possibly think of and also everything the techs told me to do nd this **bleep** still dont work and i still cant use any of the features that came on the disc (i.e.) diagnostics and others etc.etc.etc.
my only conclusion is i have a deffecti've sound card ..........unless someone can think of a miracle fix i dont see anything else it could be
Message Edited by theviper on -06-2005 :00 AM

CAN'T DOWNLOAD SOUND BLASTER

CAN SOMEBODY HELP ME TO DOWNLOAD THE SOFTWARE OF SOUND BLASTER LIVE 5. I LOST INSTALLATION'S CD...... THANKS.

>Re: Can't install Sound Blaster li've 5. on Windows XP machine: Hi Abrie,
Is your sound card was preinstalled or was it come in a retail box?
If it is a retail version then you get the driver and applications (Win XP Professional 64 bit) from the below link.
http://support.creative.com/Products/ProductDetails.aspx?catID=&subCatID=206&prodID=572 &prodName=Li've! Platinum 5.&subCatName=Li've!&CatName=Sound+Blaster&VARSET= prodfaq:PRODFAQ_572,VARSET=CategoryID:
Please copy the entire tag (entire 2 lines)?above and paste it in the web browser and hit entre.
Please let me know whether it works fine or not.
Cheers
AW

Sound blaster 5.1 Live! 16bit Windows vi

Similar Messages

Maybe you are looking for