Sound Blaster 5.1 or Sound Blaster Live

can enybody help me to find the right driver for Creative Sound Blaster 5. please note that its not Creative Sound Blaster Li've 5.
Creative Sound Blaster 5. and Creative Sound Blaster Li've 5. ARE THEY SAME? OR WHAT?can anybody help me?thanks in advance.

that means it`s no Sound Blaster 5. for vista driver?and?we can not find this kind of driver unless Creative reopen it'sand we still can not use kx version driver to make it work on vista?and i have install that card with xp driver,but it`s just 2 channl make sound.how can i fix it's

Similar Messages

Choppy sound in Windows 7 on Sound Blaster Audigy SE

Hey all,
I recently upgraded to Windows 7 and I love it with the exception of my sound card. Ever since I upgraded, all my sounds are super choppy (like every 5 seconds it chops). Of course I installed the new creative windows 7 drivers but it didn't fix the problem. Anyone have any ideas as to what could be causing this or other possible solutions to try?
Thanks,
Jason

Re: Choppy sound in Windows 7 on Sound Blaster Audigy SEk What I meant was when you uninstall your graphics driver and use standart VGA drivers then the sound turns to normal without any crackling/popping. But of course you wouldnt want to do that or else you wouldnt have graphics accerelation. (You can't play video games and even watch any kind of video)
For instance you freshly setup windows, dont install any nvidia/ati drivers, just with the big screen, install the creative drivers u wont have any problem with your sound.
That's why I said that there's a kind of confliction between graphics interface and creative drivers. Because when u install any kind of display driver, crackling sound starts again.
There's no solution for this except updated SB drivers. And that's why people get mad to creative on this forum. (Not only on this forum of course, it's a worldwide madness)

No sound with Flash 11.3 - Sound card conflict?

After updating to Flash 11.3 (11.3.300.257) on a Dell desktop on April 10 there was no sound in Firefox, Chrome or Safari. There was sound in Internet Explorer (IE9). I think I have determined that the source of my sound problems was some kind of conflict between Flash 11.3, my sound card and the three browsers above. My sound card is a Creative Sound Blaster Audigy SE.
If audio was output through the Dell's built-in sound there was sound with Flash 11.3. If audio was output through the sound card there was no sound with Flash 11.3.
I also have an HP notebook computer (no sound card; HP says current notebooks use built-in sound) running Windows 7 (64). I downloaded Flash 11.3 from: http://get.adobe.com/flashplayer/ on April 16 and have sound on Firefox, IE9, Chrome and Safari.
There have, however, been two crashes reported on Firefox.
On two computers my experience has been that if audio is being output through the computer's built-in sound that sound works all right in Flash 11.3 .
If you are having problems with sound in Flash 11.3 please describe the problems, system information and details about any sound card you are using.
Maybe the good people at Adobe will provide some guidance about what information they would like to see here.

Here are more details in case these might help users or the Adobe team.
Prior to updating to Flash 11.3 I had 11.2 on Windows Vista (32) on a Dell E510 desktop with external speakers connected to the sound card. There were never any problems with sound with Flash 11.2 or previous versions. Drivers on the sound card are up to date.
I filed a bug report about the sound issues on April 11, number 3210981.
Also, there are 15 crash reports on my Firefox browser from April 10 to 14 (accessed by typing "about:crashes" in the address bar) .
I reverted to Flash 10.3 on April 14 and there was sound in IE, Firefox and Safari. There was no sound in Chrome which had automatically updated to Flash 11.3
On April 17 I did an experiment.
When external speakers were connected to the Sound Blaster Audigy sound card (and the sound control panel was set to "Speakers SB Audigy") there was no sound in Chrome (Flash 11.3).
When the speakers were connected to the computer's built-in sound output (and the sound control panel was set to the computer's built-in audio, "Speakers SigmaTel...") there was sound in Chrome (Flash 11.3). Note: restart may be required for changes in the sound control panel to take effect.
There was sound in Firefox with Flash 10.3 with either configuration.
Finally, I physically removed the sound card and connected the speakers to the computer's built-in output. (I probably didn't need to physically remove the sound card but I wanted to anyway.) I updated to Flash 11.3 and now I have sound in Firefox, IE9, Chrome and Safari.
It remains to be seen if there will still be crashes on Firefox.

My iPad will not play sounds on certain applications. ie: if I click on a video from FB sound will not play. If I go to YouTube and play the same video sound will play. Also certain games will no longer play sounds. They always played sounds but now won't

My iPad will not play sounds on certain applications. ie: if I click on a video from FB sound will not play. If I go to YouTube and play the same video sound will play. Also certain games will no longer play sounds. They always played sounds but now won't now. I just went to my churches web site to watch live service and again no sound. I grabbed my dads iPad and the sound works fine.

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

My iPod screen got broken and some water got on it! The screen has gotten darker due to the moisture but otherwise the iPod still works except for the sound! I have no sound anymore! What can I do?

My iPod screen got broken and some water got on it! The screen has gotten darker due to the moisture but otherwise the iPod still works except for the sound! I have no sound anymore! What can I do? Pleas help!

1. Nothing and live with it
2. Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price

For Movie sound tracks, how to Make sound? Auto Normalize is dangerous

I'm not sure how to do this.
But i'm making an animation movie. i lay sounds(Mp3's etc i downloaded from websiteis) in about 3 different Normal audio tracks.
I add sounds ettects(GB rain, etc) too and also later on i will add a music track.
The problem is that, all these sounds came from different sources. some of them are loud.. some of them are quiet.
How do i prepare my sound project so that when i export somehow all that will be fixed. The last time i made a movie..and watched in in a normal TV.. some sounds were quiet i had to up the volume.. then other sounds would suddenly play and they were too loud.
At that time, i didn't use any compression or anything like that. I just adjusted the volume track sound level lines for the entire single track but also within the track i added KEYS so that i could lower the volume of loud sounds.
The whole thiing sounded good when i heard it in GBand.. but in the TV it just didn't sound good. I had loud sounds and soft sounds.. i had to, as i said, keep adjusting the TV volume.
What effect do i have to add so that 1) there won't be any dangerous changes in sounds( Some too loud, some too quiet) and 2)So that my whole track is in the same level when i play it on a TV.
I heard that using compressionin helps.. I tried a test, go to track edit and select Comporession->Limiter smooth.
That sounded like something that would work. and it did sound nice. But i'm not sure if when i play it on tv.. it iwll sound too low or too loud compared to other TV shows.
In sum, how do i make it so that when i create my movie using a Gband soundtrack composition...and hear it on at TV, that the sound level will be around the same as a regular TV show.. and not have super loudness or something

Before you experiment with compression, just put clips with different volumes on separate tracks in GB and adjust the volume using the volume slider!

For 1/11/11 expert day: can hear sounds on headphones but no sound via the internal speakers

HP Pavilion dv6135nr Notebook internal speakers have stopped working. I can hear sounds on headphones but no sound via the internal speakers. A search on HP customer care for my notebook yielded the download recommendation below, even though I had not stated my problem. However, executing this download did NOT resolve the problem. Please advise regarding resolution to inoperable speakers. I do not know if all of my sound and audio settings are correct, but the mute is not on and the volume controls are properly set. The default device is Conexant High Definition Audio output, per the sound and audio devices properties hardware tab the device status states "this device is working properly." Is it possible that a Skype or Foxfire update is in conflict with this device? If so, how do I resolve this situation?
Thank you.
Description: This package contains the driver for the Conexant High Definition Audio Chip.
PURPOSE: Routine Details and specifications File name:
sp34204.exe [1/1, 1.38M]
System requirements: HP SoftPaq Number SP32646, "Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio," (or later) must be installed on the notebook before installing this SoftPaq. Look for HP SoftPaq Number SP32646 (or later) in the Software and Driver Downloads section of the www.hp.com website. Released: 2006-12-01 Version: 3.26.0.0 A Compatibility: Microsoft Windows XP Professional, Microsoft Windows XP Home Edition, Microsoft Windows XP Media Center, Microsoft Windows XP Fix/Enhancement: Fixes issue where the notebook speakers do not work after headphones or earphones are used for a while and then unplugged.

Re: Fixes issue where the notebook speakers do not work after headphones or earphones are used for a while and then unplugged.
HOW DO YOU FIX THIS?? I cannot find the correct Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio that works with my computer...
My computer:
VISTA
HP Compaq 2230s Notebook PC
Everytime I use my headphones for more than an hour or two, the **bleep** audio will not play on my notebook's speakers, just through the headphones. Usually restarting a few times resolves the problem, but not this time. If I knew that HP computers sucked this much I would never have spent so much money on this one!!!
Can you please tell me how to fix this problem once and for all? Thanks!!

My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.

When I placed a video from my camera roll on my ipad to keynote on my ipad I lost sound how do you make sound work?

When i placed a video from my camera roll on my ipad to my keynote presentation on my ipad I lost sound how do I get sound?

Not sure of the answer, but does the sound disappear when it was added to the photo roll, or when you try to import it into Keynote?

Why doesn't Twitter & Facebook use the sounds you set in your sound settings?

When Twitter send a notification, its uses the Apple message sound, instead of the "Tweet" sound that is the default sound in your sound settings. For Facebook, it either sends the same Apple sound, or no sound at. Facebook is supposed to use the "Swish" sound. Does anyone know how to fix or configure that correctly? I did log in both apps through my settings instead of just using the apps.

Hi Judy,
The resource leveling command is not a resource optimization tool. It's only job is to resolve resource overallocations by delaying tasks. It will not:
Change resource assignment units to tasks.
Ensure the resource is "fully" utilized.
For example:
Resource with max units of 100% (the default).
Task A starts on 20 January until 22 January and the resource is assigned at 75%.
Task B starts on 21 January until 23 January and the resource is assigned at 50%
The resource is overallocated on Tuesday (peak = 125%) and Wednesday (peak = 125%).
Leveling produces this result:
Project did not drop the assignment to Task B to 25% to allow it to continue while Task A was going on -- it simply delayed B (at 50%) until A was scheduled to finish.

Rt cnbc has no sound, while other videos have sound. Suggestions?

Rt cnbc has no sound, while other videos have sound. Suggestions?

Are the videos that still have sound those in the Videos app, or a different app ? If Videos app then have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored.

I have bopped around the forums here for a while now, and while other people seem to have had the same problem as I am having in the past, I come to find that all of the solutions that have worked for others, do not in fact, work for me.
I am running Flash Professional CS6 On an Acer Aspire. 4 Gigs of RAM, 500 Gigs of HD.
The exact problem that I am having is as follows:
I record a sound bit in Audacity, Export the sound as and MP3 File on my main computer Hard Drive.
go to File>Import>Import to Library, I locate the file that I had created, then select it to be imported to my Library.
I then create a new layer in my timeline, Label it as sound, place a new key frame into the timeline layer at the place in the animation that i hope the sound would start, set the audio sync to stream instead of event, then press CTRL+ENTER, which initiates the Test Movie function.
At this time, the "Output" box Pops up and it states,
"Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored."
No sound is played and i cannot, for the life of me, figure out why. I have tried all the troubleshoots that i can find online. I checked the publishing settings and nothing is being Overridden, I've attempted to untick the "export device sounds" option, but it is grayed out and cannot be toggled. I have attempted switching the MP3 format sound clip to a WAV format sound clip. I have attempted to re-recording the sound clip and re-importing the clip to the library. I have checked my computers speakers and everything is in working order and i have even checked to see if other projects sound works.
I pulled up a previous project that i had finished a while back that had loads of sound imported the exact same way and it all works exactly as i expect it too. The sound plays, there is not "Output" box claiming an issue. It seems that the issue, whatever it might be, is stuck to this project itself.
I have even started a new project, imported and placed both the MP3 and the WAV files into the sound layer created, CTRL+ENTER, and it works just fine without problem.
If there is anything that i might have accidentally messed up in this projected that you know about, like settings that may have been changed that would cause such an annoying and seemingly unfixable issue, please let me know. I really do not want to loose this project over such an utterly stupid error.

I've moved your question to the Flash Pro CC forum.

Rapid alarm sounds followed by rapid whooshing sounds

I have a macbook air and within the last few months when I am on the internet, I hear rapid dinging alarm like sounds followed by rapid whooshing sounds as if hundreds of emails are sending when I have no emails to send. Has this happened to anyone else? Has my computer been hacked? I am on my second new credit card due to someone hacking my credit card but was luckily caughter by Barckley Credit Card. Maybe I am connecting two separate issues.

Doubtful it's a security issue ...
Check System Preferences > Sound > Sound Effects
Deselect: Play user interface sound effects

So far I've been using Flash Player 11.2 which is the only normal playing sound newer versions are stereo sound streamed normal once the second is the center sp

so far I've been using Flash Player 11.2 which is the only normal playing sound newer versions are stereo sound streamed normal once the second is the center speaker started to play

Flash Player 11.2 is horribly insecure and no longer supported. Please update to Flash 11.6

No sound with Firefox. PC sound is OK. DVD's play sound fine. Firefox stopped.

There is no sound with Firefox 5.0.1 or prior version (updated Firefox in attempt to fix). PC sound work fine. Play Solitaire, sound OK. Play DVD, sound is OK. Not in Firefox. Uninstalled and reinstalled Flash (twice) to no avail. Firefox says all plug ins are up to date.

Hi there,
UPDATE2:
Apparently using another Firefox profile the plugin-container.exe process is no longer take too much memory. However I'm currently seeing a little increase in using resources like threads and memory allocated.
It seems to me that the plugin-container.exe process and plugins installed don't work very well together. Sometimes the firefox.exe process still exists even when I had exited from the main menu (Exit).
Hoever I'm not going to continue this "test" since it is going to take too much time for me.
This thread could be intended as closed for me.
Thanks Chris.

Sound Blaster 5.1 or Sound Blaster Live

Similar Messages

Maybe you are looking for