Sound blaster 5.1 software needed for windows vi

I have installed sound blaster 5. card in my computer and my model number is SB0680 but my soundcard software is not installing in my vista os so i cant adjust my center,subwoofer volumes so kindly any one tell my the link to download the software for vista so any can help me pleaseMessage Edited by srinathgoku on 08--20070:59 PM
Message Edited by srinathgoku on 08-2-200703:5 AM

Hi,
Someone seem to have uploaded the cd image in this forum post.

Similar Messages

HT2305 I need helping with re-installing Apple Software Update for Windows Vista, please. :)

Hello, I will get my new Ipad 2 32GB on April, so I will have enjoying with Ipad with bringing up my excitement on Ipad. I need re-installing Apple Software Update for Windows Vista 32bit, but I did install iTunes, Safari, and Iphone configuration utility that it did not included Apple Software Update software. Please send me download file of Apple Software Update, immediate. Thanks
I do not certain about Ipad configuration utility, would be working with Iphone configuration utility?
david

I went into checking with Apple Software Update then I clicked Control Panel - "Repair" It was restored to start menu, thank you much thumb up to b noir Big Helping me! David

Should I let it install "Apple software update for windows 2.0.2"?

Thanks, in advance... it may just be a ditz of a question.
Running Vista and when in Mac occasionally run Parallels, Apple Software Update window popped and this update appeared:
Apple software update for windows 2.0.2 with the description
"This update includes general fixes and renews the root certificate that authenticates software delivered via Apple Software Update."
I figure it was logical enough considering the obvious link but the description just looked to vague. So, I put it off... today searching the internet, Apple Help and so on for this "update" cannot find it anywhere. I have already had problems with file corruption so "fixing root certificates" unnecessarily is not ideal.
Anyone else know one way or another or just tell it to go away for good?
Thank you,
Kylie

I never actually use Software Update excep to tell me there is something (if I hadn't read about it). I go to the standalone downloads. There was one for QuickTime for Windows that you DO want.
http://www.apple.com/support/downloads/
It sounds like Software Update for Windows, and that probably does deserve installing (I use x64 and don't really trust support yet or installers from Apple for now) so I have Apple software update in vista turned off.
I do have the 9-17-2007 2.0.2 "Apple Software Update for Windows" installed.
Why I don't trust Apple: alerts and UAC's are always hidden behind the installer window in front. I just tried to close the windows or dialogue box for Apple Software Update Preferences, it asked for UAC and went black, but I can't even close the box even though all I did was hit "Okay" button. So its 'hung' now.
Apple needs to improve the installer for Vista - a lot. I like not having to type a password every time, that has gotten old after 6 yrs.

How much disk space do i need for Windows

Okay looking to partition my hard drive to install Windows 7 using boot Camp, my question is this;
How much hard drive space to I allocate for Windows?
I only need to instal 2 programs to use with windows, I am thinking of doing 100 GB, that will leave me 831 GB for the imac.
thanks

Hi,
100GB sounds like a good choice.
For Windows 7 alone usually about 40GB are recommended. Plus the amount of disk space for the programs and files you use in Windows.
Regards
Stefan

Which is the software needed for an installation on a production server

Hi,
which is the software needed for an installation on a production server (windows 2008) of Forms/Reports 11g ?
I mean the old 10g stand alone forms and report service but un 11g release ..
Regards

For application deployments (production), you will need the following software. The same is true for a design-time environment.
1. Weblogic Server 10.3.2
2. Fusion Middleware 11.1.1.2
See my update in the following:
Re: Some FORMS quesion...
All products are contained within the Fusion Middleware (Forms, Reports, Portal, Discoverer) distribution. This includes Builders, Runtime components, HTTP Server, Web Cache, etc. During the installation process, you choose which you want to install.

About Nokia Software Updater for windows 7

i need Nokia Software Updater for windiws 7................ plz upload Nokia Software Updater for windows 7

See /discussions/board/message?board.id=swupdate&thread.id=67220

Apple software update for windows box that pops up changed to diff.language

Hey, Everyone. The little window that pops up for "apple software update for windows" and lets me know when I have an update for itunes, quicktime, etc. has changed languages. Now it shows up in Spanish. My itunes, quicktime, etc. are all in English, as well as my OS (Win XP,SP3) so I don't know how that one application could have changed. Luckily I can understand Spanish but just wondering if there's a way to change it back.
Thanks!

Hi Troy,
I had the same issue as you. All of a sudden the Software Update window was in swedish. After uninstalling and reinstalling ASU a few times I realised there was no need for it at all. All you have to do is go to Control Panel, Clock Language and Region, Regional and Language Options, Administrative, and then Change System Locale. I changed mine back to English (United States), restarted and voila, it was fixed! I hope this works for you too.
EDIT: Just noticed you are running XP. I am on Vista but it shouldn't be too different I suppose.
Message was edited by: Ben B Cruz

Software needed for the USB device, "USB Interface Controller TEST2.0"

My mother recently acquired a digital camera. She acquired it from a second-hand store, which did not include an interface cable or software. The manual (and the USB port on the camera) indicates that a male-male USB cable is necessary for photos to be copied to the hard drive.
I was not successful in locating such a cable at any local electronics store (I assume such a cable is now out-of-date). I purchased one from a seller on eBay. The brand is "e circuit electronics".
Upon powering up the camera with the cable connected to it and the computer, the following message appeared:
"Software needed for the USB device "USB Interface Controller TEST2.0" is not available. Would you like to look for the software on the Internet?"
I clicked "Yes". After an approximate two-minute wait, another message appeared stating:
"Software Update is not able to connect to the Internet. Please check your configuration and try again."
I deleted, "Software Update Preferences" in the Preferences folder inside the System Folder, without solving the problem. How do I solve the issue of allowing Software Update to connect to the Internet?

Thank you for your continued assistance, BDAqua. Unfortunately, the driver you linked to does not seem to be compatible with the camera. It is a driver for the V20 model, whereas my model would correspond to be a V2755, as referenced from a list of other Vivicam models when during a search at the Open Drivers web site.
From the system requirement about the card reader you gave me, it will not work, as this system is running 9.1. I am hesistant to upgrade this computer to 9.2, as I have experienced system unstability with that version, with even the 9.2.2 update applied.
In the mean time, I have e-mailed Vivitar regarding this issue, but have as of yet received a reply.
I am not certain as to other specifics to give you, in order to solve the Software Update problem. Please elaborate.
Yes eww, the computer in question is able to fully connect to the Internet for all that I need. I am fully aware of the difference between a computer connecting to the Internet, and a computer connecting to a digital camera. I have 15 years of Macintosh experience.

Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.

Uninstalling the iCloud control panel should allow you to do that folder deletion.

How big of a partition do I need for windows Xp?

How Big of a partition do I need for Windows XP? And to be able to run visual Basics program?

Nobody can answer that question with any certainty because we don't know your computing needs and what specific apps you're going to isntall.
Regardless, this forum is for the troubleshooting the installation of OS X, not Boot Camp, and you'll probably want to post your question over in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237

Forum : Apple Software Update for Windows

Anyway we could get a notification at the top of the Forum : Apple Software Update for Windows
Something in red with big letters similar to at the top of the discussion forum page as it seems that the majority of the posts in there have nothing to do with the Software Update for Windows software.
Just to let people know that the forum is for something in particular not a place to post random queries.
I was clicking through trying to find some info (that i couldn't think of the right words for so didn't search) and the amount of unrelated stuff in there is surprising.
Anyway thought i'd bring it to peoples and hopefully the hosts attention, and figured something at the top to advise people of the actual use of that forum might help cut down on the dross.

The Hosts might be willing to give it a try, but I'd wager a cookie that it wouldn't help. There are huge red letters above this forum telling people not to post technical questions here, but people do it all the time anyway. It can be annoying, I know, but people often just seem to get focused on what it is they're after and just don't notice they're in the wrong place, or they're confused and/or frustrated and post in the first place they can find. There's not much that can be done other than to gently redirect them to a more appropriate place to get assistance (and if you're Level 2 or above, you can notify on the post and ask that it be moved to the correct forum).
Regards.

Upgrade to I-Tunes 7.4.2 with Apple Software Update for Windows

I upgraded to I-Tunes 7.4.2 and that went great. But I was also offered an Apple Software Update for Windows which would not install. The error message said something about a part of it not being able to run. Is this a Vista thing? I still have Windows XP and don't plan to change to Vista. Will I have issues with newer versions of I-Tunes if I can't get this Software Update for Windows to install?
Thanks!

Thanks for the replies, but what I am hoping for is a solution.
Even though I asked, you never said if you have an ASU 2.0.0.21 ... so this solution runs the risk of being irrelevant to your situation. (It applies to the issue of ASU 2.0.0.21 on an XP PC returning an "invalid signature" message when trying to download an ASU 2.1.0.101.)
If that's what you've got here, then usually a software installer bundle from Apple which contains a higher version of ASU than the 2.0.0.21 will install on the PC in question.
(Avoid using the BonJour for Windows 1.0.4 standalone installer just at the moment, as a precaution. Last time I checked, about 20 minutes ago, that still contained an ASU 2.0.0.21, and that won't get you any further forward than you currently are ... assuming that you've currently got an ASU 2.0.0.21 in place.)
So download and install another Apple installer bundle. Here's a link through to the QuickTime Standalone installer, although the Safari for Windows or iTunes installer would also work:
Latest Quicktime Installers … get the one that doesn’t mention iTunes
That should, as part of the install, update your ASU to version 2.1.0.101. To check on that, launch ASU ("Start > All Programs > Apple Software Update"), go "Help > About Apple Software Update" and check the version number. If you're now at ASU 2.1.0.101, you're past the problem with ASU 2.0.0.21 returning an 'Invalid signature" message when trying to install an ASU 2.1.0.101 (assuming that's the particular problem you were actually experiencing).
You can then uninstall QuickTime for Windows (or Safari for Windows, or iTunes and QuickTime and Apple Mobile Device Support, depending on what installer you used to update your ASU version) through your Add/Remove programs control panel.

(Please note) - Report - Bluetooth with Enhanced Data Rate Software II for Windows 7 wipe main drive

All,
There have been reports that when upgrading the Bluetooth with Enhanced Data Rate Software II for Windows 7 to version 6.4.0.1700 is causing a wipe on the main OS drive (commonly C:\)
Version:
6.4.0.1700
Release Date:
2011/05/16
Affected units which uses this version of driver are as follows.
Support models ThinkPad L420, L421
ThinkPad L520
ThinkPad T420, T420i, T420s, T420si
ThinkPad T520, T520i
Thinkpad W520
ThinkPad X1
ThinkPad X220, X220i, X220 Tablet, X220i Tablet
ThinkPad Edge E220s
ThinkPad Edge E420, E420s
ThinkPad Edge E520
Issue has been raised to engineering and the team are currently working on it.
****Please do not update the Bluetooth driver until further notice****
We are in a process of pulling the driver off the Support Site and ThinkVantage System Update
Main thread discussion here
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD
Solved!
Go to Solution.

All,
Updated drivers have been released to the web team and should be published in the next couple of days.
Will update this thread once they are live - the official solution will be to use the newer drivers.
mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I-Tunes 7.4.2 with Apple Software Update for Windows

When I upgraded to I-Tunes 7.4.2, I was also offered an Apple Softward Update for Windows. This failed to install. The error message said something about part of it not being able to run or something. Is this a Vista thing? I still have Windows XP and don't plan to change. Will I have problems with newer versions of I-Tunes? How can I get this Apple Software Update for Windows to work - or do I have to?
Thanks!

Thanks for the replies, but what I am hoping for is a solution.
Even though I asked, you never said if you have an ASU 2.0.0.21 ... so this solution runs the risk of being irrelevant to your situation. (It applies to the issue of ASU 2.0.0.21 on an XP PC returning an "invalid signature" message when trying to download an ASU 2.1.0.101.)
If that's what you've got here, then usually a software installer bundle from Apple which contains a higher version of ASU than the 2.0.0.21 will install on the PC in question.
(Avoid using the BonJour for Windows 1.0.4 standalone installer just at the moment, as a precaution. Last time I checked, about 20 minutes ago, that still contained an ASU 2.0.0.21, and that won't get you any further forward than you currently are ... assuming that you've currently got an ASU 2.0.0.21 in place.)
So download and install another Apple installer bundle. Here's a link through to the QuickTime Standalone installer, although the Safari for Windows or iTunes installer would also work:
Latest Quicktime Installers … get the one that doesn’t mention iTunes
That should, as part of the install, update your ASU to version 2.1.0.101. To check on that, launch ASU ("Start > All Programs > Apple Software Update"), go "Help > About Apple Software Update" and check the version number. If you're now at ASU 2.1.0.101, you're past the problem with ASU 2.0.0.21 returning an 'Invalid signature" message when trying to install an ASU 2.1.0.101 (assuming that's the particular problem you were actually experiencing).
You can then uninstall QuickTime for Windows (or Safari for Windows, or iTunes and QuickTime and Apple Mobile Device Support, depending on what installer you used to update your ASU version) through your Add/Remove programs control panel.

Apple Software Update for Windows and Proxy servers

I try to run Apple Software Update that just got installed in Windows, but it is unable to locate the server and immediately quits. I know I have to go through a proxy server here in work, but I never get the opportunity to enter the proxy information and cannot get to the menus in the Apple Software Updater for Windows to see if I even have the option to enter Proxy information. How am I supposed to get this to work?

Hmmmmm.
Try checking the rules in your firewall software. Is Apple Software Update being allowed full access to the internet?

Sound blaster 5.1 software needed for windows vi

Similar Messages

Maybe you are looking for