Sound blaster arena windows 7 problem

hi i have a problem with my headset problem is this when i use my headset at windows xp i can get full performance of surround sound and alsa i can choose 5.1 speaker settings at windows sound control menu but ın contrast i can not choose at windows 7.it is very annoying because the difference of the sound quality is very big between windows 7 and xp. please help me about these problem i know i am not the one who have this problem . thanks

What about disabling your on-board sound card and boot into Windows without connecting the Sound Blaster Play!. Then restart and connect your Sound Blaster Play! again.
Have you downloaded and installed the latest driver for the Sound Blaster Play!? It can be found in this site http://support.creative.com/Products...T=CategoryID:1

Similar Messages

Sound Blaster Arena Headphones Problem - On and Off

I have a problem with my Sound Blaster Arena Headset. Its been working perfectly until yesterday. It keeps turning on and off in the playback devices but it stays off unless I replug the USB or switch USB ports. Then shortly after it works again it turns off again. When it says "No audio output device installed" on the list of playback devices, there is a static noise coming out of the headphones like a beat of a pulse. I tried reinstalling numerous times and still no difference. I also tried plugging in the USB in the back of the computer, but with same results, the headset becomes "unplugged" again. Thanks for reading and please try to help.

Yo, if you ever come back here(you last visited in March) We can probably help one another. The wires you are talking about are:
red/blue = V+ or volume up
red/green = MIC switch on/off
green/copper = G (ground for the LED)
FULL red = L or left earphone. I have this associated with tp7.
I have no wires connected to my circuit board. I have been using trial an error to identify what goes where. However I have been given ONE godsend. When the wires were ripped from the circuit board the white sheathed wire left a little section on the circuit board identifying it as tp5.
IF all you have is the four missing connections you could easily use trial n error. Touching the missing wires to each node.
for the mic switch. Open up ventrilo and get it listening for the mic.
process of elimination. Then you can do volume up. or get the led working by touching the ground to the nodes(possibly the easiest)
I'm going back to the drawing board with the the red wire.

Problem: Sound Blaster Arena Surround USB Gaming Headset

Hello
I have one of these Sound Blaster Arena Surround USB Gaming Headset, which are 7..
I have Windows 7 as OS on my computer and it gives me a few problems.
W7 recognises the headset as a "Stereo" headset. The headset has a Sound Card of it's own and uses the drivers that come with the Installation CD for Surround settings that are mad in Audio Control Panel or Creative Entertainment Console.
This is a problem.
For example. Playing Call of Duty 5: World at War.
The audio settings on this game, always (and is unchangeable) goes after the default Audio Device. And then it recognises my Headset. And puts in STEREO config. Since it was W7 recognises, and I cant change that on the game and neither on the Audio Settings on the computer. Which make the subwoffer and Surround effects useless which is a hard bummer, since it's such an awesome headset and is totally awesome when i play Battlefield: Bad Company 2.
I really want to know how I can fix this! Please help me. Any settings or special config in the cfg files you can do on Call of Duty 5 or and settings or stuff I can do to change so W7 recognises my headset with the 7.!

[url="http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-Surround-USB-Gaming-Headset-broken/td-p/576577">moved to headphone & headset section[/url]

Multiple cases in which the Sound Blaster Arena USB Headset breaks. . .

I bought the Complexity edition of the Sound Blaster Arena Surround USB Gaming Headset. After using it for months the USB connector part of the headset breaks and falls apart. Feedback from here shows that this has happened to many other people (http://www.newegg.com/Product/Produc...82E16826158084).
I want to know if can get this repaired as this is a defect. When i tried submitting an RMA it says that the serial isnt recognized but when i registered my product it works.

Hello Bunbotman990,
Please get in touch with customer support here if you have problems with the online RMA. I'm not sure but for issues like this, they may have to ask you to send in a pic of the defective part.

No left audio. No serial. Sound Blaster Arena Surround usb Gaming Headset.

I have a Sound Blaster Arena Surround usb Gaming Headset and the left speaker no longer works.
I have tried the headset on multiple computers ranging from xp to vista to 7. some have different versions of the driver. On all the left audio is silent.
I would like to redeem my warranty because I bought the product on 08/04/10
But I no longer have the box or booklet that came with it and therefore can’t get the serial number for the device.
Is there anything you guys can do to help me?
The closest article I could find to this problem was here http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-problem/m-p/558966#M2001. So it appears I must wait for an admin to help.

Thanks!
Very handy info.
I went to http://rma.creativelabs.com/OnlineRMA/EnterProduct and that section required I have a legit serial number.
Thanks!

How does one enable Stereo Mix on the Sound Blaster Arena Surround USB Gaming Headset

I'm usually streaming games and I picked up this headset to replace my old gear.
I've noticed in 32-bit XP Pro I do not have the option to enable stereo mix which was how i was able to stream game audio and commentary on.
Does a work around exist to enable stereo mix or to otherwise transmit audio from both the input and playback sources?
BTW I've also posted this on the Livestream forums to see if I can get a bite.

[url="http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-Surround-USB-Gaming-Headset-broken/td-p/576577">moved to headphone & headset section[/url]

Sound Blaster Arena Surround USB Gaming Headset broken

6Sound Blaster Arena Surround USB Gaming Headset broken?[url="http://www.tomshardware.com/forum/5789-6-sound-blaster-arena-surround-gaming-headset-broken#t384326">Original post on tom's hardware[/url]
Hello,?
My cat jumped off my?[url="http://www.tomshardware.com/forum/5789-6-sound-blaster-arena-surround-gaming-headset-broken#">computer[/url]?desk while I was wearing my?[url="http://www.tomshardware.com/forum/5789-6-sound-blaster-arena-surround-gaming-headset-broken#">headphones[/url]. The result was the wires separating from the USB end. They are quite distinguishable and not impossible to solder. However knowing which wire corresponds to which solder point is beyond me. I contacted Creative. They will not help me. If anyone has a Sound Blaster Arena Surround USB Gaming Headset and would be willing to open up the plastic housing on the USB end to tell me what goes where I would greatly appreciate it. Also the plastic housing will go back together. If any additional info is necessary, please inquire.
[img"]http://img76.imageshack.us/img76/3769/arenaheadsetwiringdiagr.png" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27 [img"]http://img685.imageshack.us/img685/876/p000896y.jpg" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27 [img"]http://img846.imageshack.us/img846/869/p000899.jpg" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27 [img"]http://img860.imageshack.us/img860/4259/p000898.jpg" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27

[url="http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-Surround-USB-Gaming-Headset-broken/td-p/576577">moved to headphone & headset section[/url]

Sound blaster roar Windows 7 setup

Need help! This is the message I got.
Sound blaster roar Windows 7 "setup is unable to detect a supported product on your system"

Originally Posted by VicDizon
Need help! This is the message I got.
Sound blaster roar Windows 7 "setup is unable to detect a supported product on your system"
Turning on Roar is not enough.
You need to connect Roar to computer and press and hold Play button:
http://support.creative.com/kb/ShowA...spx?sid=122386

Any ISOs for Sound Blaster Arena CD?

Hi, I got my Sound Blaster Arena headset last year when I started gaming. The drivers installed right away, so I didn't think I needed the CD. Recently, I've been reading on how to improve quality on the headset by installing some things that are on the CD, but now I can't find it. I think I might have thrown it out with the box (not that I have a CD-rom drive anyway).
Can anyone tell me what programs would be on that CD that comes with the Sound Blaster Arena? Does anyone know if I can get the ISO or the programs from an external source?
Thanks for any help

Hi,
You can find the drivers in the download area but some of the applications aren't available for download. If you are looking for the installation cd, you might want to write to Customer Support to see how they can help you with this.

Sound Blaster ZxR latency problems

I bought SB ZxR last week and I'm using it for gaming, recording and just rehearsing guitar playing (my preamp is connected to sound card AUX in). I'm having trouble getting the sound in sync with my playing. In fact it's pretty much impossible to play properly, because the sound is always some 20-30ms late. I understand that when I output to optical output, then there might be some delay, but the delay is there also when outputting to analog outputs (though not so bad, but makes playing impossible still). I've tried all the settings in ZxR control panel and I haven't found working combination. Seems like the card is doing some processing to incoming signal in all occasions. I'm really disappointed, since the sound quality is otherwise excellent. I haven't had this kind of problems with my previous sound cards (Terratec 6fire, X-fi Elite pro, Auzentech Prelude). Prelude created latency when enabling DD live or DTS encoding, but disabling those made latency almost zero.
Has anyone tried playing any instrument live with this card and maybe found a solution for these latency problems?

Originally Posted by slumberfi
...(I suspect the hardware simply isn't capable of significantly better performance).
Incorrect in my experience.
I've just installed a Sound Blaster Zx - purchased because it is supposed to have near zip latency.
and it was so - with 92000 sample rate and 192 samples! Latency was near zero.
Before it was near 10-20 milliseconds with my old SB Fx 1270 THX
My keyboard is so fast it's weird getting used to it.
Notes:
1. select the Sound Blaster SBZ series ASIO, NOT the "Creative ASIO".
2. Be sure to remove all old Creative software before installing. I tried it without doing this cleaning, and got odd silences in my browsers at random-seeming times. It seems to work better now.
3. Measuring tool: DPC latency checker V 1.2.0
(CEntrance latency test did not work)
Results: Average latency 26 microseconds,
peak latency 1120 microseconds when starting up Kontackt 5 (note: Micro, not Milli-seconds)
I'll let you know here if I have problems -
Ken Rushton
Background: running Kontact 5 Player.
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name KEN-PC
System Manufacturer System manufacturer
System Model System Product Name
System Type x64-based PC
Processor Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz, 3068 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 0803, 8/6/2012
SMBIOS Version 2.5
Windows Directory C:\windows
System Directory C:\windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1....
User Name Ken-PC\Ken
Time Zone Pacific Standard Time
Installed Physical Memory (RAM) 12.0 GB
Total Physical Memory 12.0 GB
Available Physical Memory 8.79 GB
Total Virtual Memory 24.0 GB
Available Virtual Memory 20.7 GB
Page File Space 12.0 GB
Page File C:\pagefile.sys

Sound blaster for windows

I am trying to install sound blaster (CT480 card) into a windows 98 machine. It is giving me an error message of (DevCon DLL not in correct folder). Can anyone help with this error message or direct me to a better driver download... or a patch.
Thanks,
Dan

Masoudi,
If your Sound Card is actually an onboard card, then your best contact for drivers for it would be your motherboard manufacturer. These cards are different from our retail cards and use drivers that were made for them.
Jeremy

Creative Sound Blaster Audigy SE problems

Alright first of all I am new to Linux in general.
I have two soundcards in my computer. One is an onboard card (Intel) that is faulty and doesn't work; another is a Creative Sound Blaster Audigy SE which does work.
My problem, of course, is getting the latter to work.
So I realize this is nothing new, searching the forums and reading ALSA's wiki. However there seems to be some issues with making this work on ALSA, so is there a way to configure this with OSS?
"lspci | grep audio" returns both soundcards:
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:00.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster
"ossdetect -v" returns:
Detected Sound Blaster Audigy LS / Live7.1
Detected Intel AC97 (ICH5)
USB support available in the system, adding USB driver
Detected Generic USB audio/MIDI device (BETA)
I use "soundoff" and "soundon", then "osstest":
Sound subsystem and version: OSS 4.1 (b 1052/200903241101) (0x00040100)
Platform: Linux/i686 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
*** Scanning sound adapter #-1 ***
/dev/oss/oss_audigyls0/pcm0 (audio engine 0): AudigyLS front
- Performing audio playback test...
<left> Device returned error: Input/output error
/dev/oss/oss_audigyls0/pcm1 (audio engine 2): AudigyLS center/lfe
- Performing audio playback test...
<left> Device returned error: Input/output error
/dev/oss/oss_audigyls0/pcm2 (audio engine 3): AudigyLS surround
- Performing audio playback test...
<left> Device returned error: Input/output error
/dev/oss/oss_audigyls0/pcm3 (audio engine 4): AudigyLS 5.1 output
- Skipping multi channel device
*** Scanning sound adapter #1 ***
/dev/oss/oss_ich0/pcm0 (audio engine 9): Intel ICH5 (24D5)
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47982.00 Hz (-0.04%)>
*** Some errors were detected during the tests ***
Basically it seems like it detects the crappy onboard sound (which is unusable, I stress) and not my soundcard. I really don't know how to fix/configure this and sound is really important to me if I'll be using Arch.
Thanks for any help offered, if more information about something is needed I'll be more than happy to oblige.

I would start by disabling the on board sound in your BIOS if you are not going to use it. As a novice user much of the documentation kind of covers the simpler case and this might help you navigate them better.
Keep in mind the Audigy SE is not a real Audigy (like Audigy 2 which has very good linux support). If you are just looking for straightforward playback you should have no trouble, but you will not get hardware mixing with SE IIRC.

Sound Blaster Tactic3d alpha problems

Hi, i have some problems with installing Sound Blaster Tactic3d alpha drivers.
First is that i don't have pannel after installing drivers and second one is that my microphone is muted. Can someone help me ?
*EDIT*
Problems fixed (downloaded and installed this : http://www.userdrivers.com/Sound-Card/Creative-Sound-Blaster-Tactic3D-Alpha-Pack--0-000-for-Windo... ), but now control pannel is freezing on pop up.

Hi,
This could be caused by residual files from previous installation. It would advisable to uninstall and reinstall the package with a clean boot of your system. This article may help.

Creative Sound Blaster Arena Headset HS-1100 Windows 7 Volume Too Loud

I have a strange problem with my Creative Arena Headset. The volume level of it is too high.
To avoid hurting my ears, i have to set the master volume in the windows mixer to 4/00, this causes a problem when running other applications and adjusting volume. For instance, when running skype, the volume control within the application is literally either "off" or "on" and I can often here every bit of buzzing and background noise that I cant hear through my speakers seperately.
Also, because the volume has to be set at 4/00, the feature in windows to automatically adjust volume levels of applications doesnt work, so I cannot use the feature of automatically lowering the volume of music when chatting online.
This poses an annoying problem i have tried to resolve for a while now (ever since I have had this headset).
I am running the latest drivers from your download site: XFHP_PCDRV_LB__0_000 on the Windows 7 operating system.
I have also reinstalled the drivers and tried the headset on a different computer and it results in the same massi'vely loud volume.
Is there any reason my headset is so loud? Is there anything I can do about it?

@Dodgetimmy,
Can you try reinstalling the headset using the driver from the installation cd? You might also want to try using the generic drivers by simply plugging the headset to the PC without installing the Creative drivers to see if it makes a difference.
If it is still not working for you, Customer Support can be contacted using this email form.

Windows Vista vs. Sound Blaster Audigy Value = Problem

I am facing problems with SoundBlaster Audigy Value when using it with Windows Vista. However i have downloaded and installed latest drivers (Version No. - SB24_VTDRV_LB__04_0077) supporting this card but still it is functioning as good as it worked with windows XP .
Prob # : I can hear sound from my TV Tuner device but cannot perform recording , an error ("Cannot render audio capture system") is generated whenever i try to do so. I also tried to set recording control of my Tv Tuner device to sound card's "line in" parameter as i used to do in XP but in Vista my device shows nothing. Why ?
Prob # 2: Can you tell me where I can find "creative graphic equalizer" for this card which supports windows Vista or please provide a link to download it's
Prob # 3: Why we cannot enable "Bass Boost" using new Creative Audio Console while using Creative Inspire 4400 (4. Channel Speakers) like i used to do in windows XP ?
I will be extremely thankful to you if you please provide a solution to these problems.
Thank You........

altho i tried this with audigy se u might wanna check this
http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=7665#M7665

Sound blaster arena windows 7 problem

Similar Messages

Maybe you are looking for