Sound blaster aud. 2 nx through usb

I am thinking of a sound blaster audiology 2 nz external card. can I run it through a usb2 hub? If I do will I get any latency, or sync problems when playing back dvds and stuff

I was also wondering if it work with capturing the audio in time while i am recording tv

Similar Messages

Creative Sound Blaster 5.1 Pro Usb Channel Problem

Hi
I have Creative Sound Blaster 5.1 Pro Usb connected analog with Creative Inspire 5200 (5.1). Operating system Win8.1 with full updated. When I watching DVD etc 5.1 sound-everything is ok. But if i listen stereo music, there are 3 channels work that Front right,left and Center. This is not enough satisfy me.
On the other hand, when i watching something on youtube, there are 4 channels work (Front Right/Left&Rear Right/Left) which is better.
Which settings fix my problem for 4 channels listening stereo?
Have a good day..
DSC_0316.jpg

Originally Posted by leqo
I want this
Adsızs.jpg
Audio Center is not established.audio center How to install ? thnx.
Adsız.jpg
Hi leqo,
The Audio Center software works on Windows Vista. Please make sure you are installing it on the supported platform.
Cheers,
JL-CL

Is Creative Sound Blaster Audigy 2 NX USB sound card compatible with Dell deskt

Im considering buying the Creative Sound Blaster Audigy 2 NX USB sound card to use with a Dell desktop XPS 40, but recently read a forum message on another page that there was a issue with installing on a Dell Tower but no problems with installing on a laptop
any help is appreciated if there are any compatibility issues with using this sound card on a Dell desktop, Thanks
the main reason I would like to upgrade to this card is so my pc doesnt use the integrated audio which Id like better quality performance with a sound card and also dont want to install a internal card on the system

joaolfb,
Audigy 2 NX will need to be connected with the power adaptor inorder to run. USB will not be enough to sustain the power consumption of the sound card.
Jason

Sound Blaster Surround 5.1 USB on GNU/Li

Hi, I need to buy USB sound card for my laptop. Sound Blaster Surround 5. seems to be a good choice, but I am running only Ubuntu Linux, so I need to know if it will be working. I know, that only M$ Windows are supported, but it's working on Linux or not?
Thanks for all responses.
Luke

U need to go and set to 5. speakers in the Audio Console for the 5. speakers to work.

Vista "still" doesn't recognise sound blaster aud

I know it's been covered to death, but any of the programs suggested will not install because vista doesn't recognise that I have a sound card. Sound blaster audigy 2 + vista home premium. That includes, drivers and audio console. WIll not install because there is no hardware recognition. Anyone solve this problem yet http://img237.imageshack.us/img237/267/aaadj0.jpg

I know it's been covered to death, but any of the programs suggested will not install because vista doesn't recognise that I have a sound card. Sound blaster audigy 2 + vista home premium. That includes, drivers and audio console. WIll not install because there is no hardware recognition. Anyone solve this problem yet http://img237.imageshack.us/img237/267/aaadj0.jpg

Rear Channel Sound Volume Controller for sound blaster Aud

Hi?Every body Wish you a wonderful new year 2008,?I am using creative sound blaster Audigy? sound card and the speaker system is creative inspire 5. I have the volume controller for front and center and subwooferbut i don`t have the controller for rear channel and the same time the rear channel is working with the low volume?not able to hear the sound from the rear channel but its working fine if i go near to the speaker i can hear the sound very lowi need to increase the sound for the rear channel?If any body know how to control the rear channel for sound blaster audigy could you let me know .... System Specifications:Operating System :Win -XP Sp2Memory : GBVideo Card :Ausus ATI Radian card?

op
ps.
i want to add. some additional information, my 5. speaker doesn't have digital output, the line out for the sub woofer and centre are red and white line just like the same as the other speaker line, i don't know weather it will cause the front doesn't work or not, but i had read some post it said "In the Creative Mixer, be sure to disable the option for Digital Output Only, and set the number of speakers accordingly. For example, if you have a 5. channel speaker system, select 5.."
if, i didn't change the creative mixer to "disable the option for digital output", will it cause the centre and sub woofer have no sound at all? plesae reply A.S.A.P. as i don't know weather it is the problem of the sound card or just a problem of the setting.....thanks alot.

No sound when streaming audio through USB to car stereo *solved*

Short version: Many months ago my wife and I had iPhone 4s with AT&T and my phone would playing streaming apps (Pandora, Slacker) over USB to my Pioneer head unit and my Ford SYNC while my wife's would not. There was no error given, it appeared to be playing fine-- there would just be no sound.
Fast forward to present and I have a Verizon iPhone 4 and I am getting the same issues as my wife was having previously.
After much forum reading about iOS4 breaking this functionality for many people across the globe with many makes and models of stereos and cars I realized I was not getting the same error as all of these people. I was getting NO error at all; I just wasn't getting any sound out of these apps.
I read a post about how a random song would kick on when they connected their phone to the car, then it hit me. My old iPhone used to do that. Then THIS hit me. I do not have any mp3s synced to this phone. Nor did my wife back then. So I threw a handful of songs onto my iPhone and sure enough it immediately chose a song at random, started playing it and then I switched to Slacker radio and it faded down the iPod song and started streaming the audio from Slacker.
tl;dr version: If streaming apps are not playing any sound through your USB cable. Make sure you have some songs synced to your iPhone.

I found a solution, reset all settings. Settings > General > Reset > Reset all Settings
Fixed the problem, now back to properly streaming music!

Sound Blaster Aud

[size="4" face="Comic Sans MS">Does anyone know which are the correct updated drivers for a ?[size="4" face="Comic Sans MS">I changed the processor into Hyperthreding and it caused incompatibility with the Sound Card.[size="4" face="Comic Sans MS">I can not find updated drivers.[size="4" face="Comic Sans MS">The ones that came with my cd causes the system to crash.[size="4" face="Comic Sans MS">Could u pls help me?

hi cartoon_gr
Did you go to the Support tab at the top of the screen and the download section and download the updated drivers?

Problems with creative sound blaster aud

i have 2 problems . my system says i have a corrupt file when i try to auto update. i see that no one has been able to find a solution to this. 2. i installed the card and all its software but i get no audio. device manager says that its working properly. any one have any suggestions.

had this problem before. this KB link may helphttp://us.creative.com/support/kb & search for "SID2443"

Performance problems in games with Sound Blaster USB Sound Dev

Hello!
I recently bought a new USB sound device named "Creative Sound Blaster Surround 5. USB Sound Device"?or maybe also "Sound Blaster Li've! 24-bit External" as this is the name that Windows is displaying.
Before, i was using a C-Media PCI Audio Device.
Other system info:
Windows Vista SP
ATI Radeon 9200 LE (i know it's old, but i was able to play the games before)
2GB RAM
Now, my performance in games decreased significantly.
I only play Team Fortress 2, but i also tried an old GoldSrc engine?based game which was also slower.
The game now isn't playing fluently like before: my fps dropped and every few seconds, the graphics stop as there is a big network lag. It is now impossible to really play the game.
i already tried
- reinstalling steam and tf2
- using another usb port
- reinstalling the sound drivers
- all (both sound and graphics) settings to low
The Steam support thinks that the data transfer rate for USB isn't high enough for what is needed and recommends that i should buy an internal sound card.
But i hope there is a different solution to this problem and someone here can help.
Thanks!

No PCI interface, but USB = Slow. No hardware-acceleration (Mayber your CMedia had !real!, not pseudo?DS hardware support) so its normal that the soundblaster usb is slower in every term. But maybe sounds better...
The USB versions are only for Notebooks and other speciall situations where a PCI soundcard with X-FI or Audigy chip cannot be used...

USB Sound Blaster MP3+ and Vi

My USB Sound Blaster MP3+ performs fantastically using the nati've drivers on Win2K and WinXP.
On Vista, however, there is a chirpy/buzzy distortion piggybacking on any signal passed through the A-to-D (line in, specifically). I've tried two different Vista PC, different powered USB hubs, and with and without the Creative USB Series Windows Vista Driver .0.0002 to no benefit.
I'm an engineer and a programmer, but not a Windows programmer. Can somebody tell me why this nearly generic USB Audio interface doesn't work with Vista I have other USB Audio devices that work fine with the nati've drivers on Vista.

Is there anyone with experience with this sound card, recording and Vista?

How do I monitor my 'line-in' recording with my Sound Blaster USB Mp3

I'm recording tracts of my band from a MD via line in. How do I monitor what's being recorded (in real time)?
Sound Blaster USB Mp3+
Thanks,
Mike

my problem seems similar to prior post.
I have attached Creative USB Sound Blaser MP3+ a.k.a. SB0270 to a Compaq Presario 700 lap top computer via its USB .0 port. I'm running WinXP Home with SR-2 update.
I have found that I CAN record audio using Creative's Wave Studio by first selecting "Line-In" in Microsoft's "Volume Control" software Options/Properties/Recording. "Line-In" then appears as the label on the record level control in Creative's Wave Studio. This was not the intuiti've choice as music fed in through a USB port supposedly uses the SPDIF (Sony Phillips Digital Interface Format). Selecting the SPDIF in Microsoft's "volume control" doesn't work.
However, although I can record the audio, I can not find any way to monitor the level of the audio while recording. When recording using Creative's Wave Studio, an indicator (lower left of screen) shows it is in the recording mode, but the level indicator is a straight line at zero / baseline. Furthermore, the input signal can not of been too small to be seen, because the graph shows nearly full modulation on playback.
How does one monitor the recording level while recording?

Constant crackle with USB Sound Blaster 5.1. I'll reward you with cookies if you help

Hey guys,
I got the external USB Sound Blaster X-Fi 5. Surround sound card for Christmas, and I've heard a constant, uninterrupted crackle/popping sound since I've installed it. It's incredibly aggravating. I ran through the FAQ, but most of it wasn't applicable because this isn't an internal sound card.
I'm running Windows 7 with 4 gigs of RAM. I can provide other specs if necessary. I'm about to return this card if I can't figure out the problem, so any help provided would be most appreciated. Thanks!

I am curious to learn, what kind of processor do you use?
I use the same product but I have, afaik, not noticed any crackling or popping, certainly nothing constant.
If you use Winamp, the following tips might not help, but at least I get to mention it. In the preferences, under plug-ins and under Output, one can in the device tab change the eh uh device.
Mine was set to primary sound driver, and I set it to "02 Speaker (Sound Blaster X-Fi Surround 5. Pro", though I do not think it make any difference. Edit: I see now that there is a message here saying "FAQ 0 "primary sound driver" refers to preferred sound device selected in windows control panel".
Someone mentioned that one could try checking the "create primary buffer" in that same tab.
In the next tab called "Buffering", there is the option to "enable cpu usage control". Not sure what good that is for.
Edit2: If you use Winamp, you might want to try out this DSP plugin "enhancer", only works with win7 with this guys work on it (old plugin allegedly unsupported):
http://www.nunzioweb.com/daz/enhancer/

USB Live! Sound Blaster 24bit with poppi

Hi. A month or two ago I purchased my usb connected Li've! Sound Blaster 24bit from CompUSA. It has worked fine with my logitech 5. speakers. Yesterday, I bought a 60gig Maxtor harddri've from compusa, also USB. Since I installed that, my sound has been having loud pop sounds once in a while, especially when data is being transfered to the harddri've. I have a 400watt powersuply, amd athlon single core processor, gig ram, onboard harddri've, a geforce nvida 7800gt graphics card. The video card has a printed requirement of 350watts. The harddri've has its own powercord, and the usb that connects it to my PC, and so do the logitech speakers I have both the sound blaster and the harddri've plugged into the rear of my PC.
The poping sound happens about twice, then the sound blaster box makes a click sound and turns off. When I unplug, then plug it back in or press the mute button on it, it comes back on, but I have to restart whatever application that was playing the sound because it no longer works. For instance, if I'm listening to music on iTunes, and the card turns off, I have to close iTunes and reopen it or no sound will come from that application, same goes for media players, web based sound i.e. youtube. When the card turns off, the green and blue light on the front turn off, while I can still see a red glow from the 'optical output' slot.
The only change I made with my PC is plugging in the harddri've. The popping/shutting off of the card happens both when I play sound thats stored on the external dri've, and stuff like my iTunes which is on my internal. The model number of my card is 580490 and the box had a sticker that said '5. home theater audio for your PC' plus another sticker that said '64 bit, Windows XP Pro x64'. I downloaded the drivers for this, but when I tried to apply them, it said they didn't need to be updated. I don't know how to uninstall them.
Thanks, asukar

AmusedToDeath,
It's not referring to the cable. That information is referring to your computer USB controller. If your computer USB controller is only USB . then you will face the limitation.
Jason

Windows Vista - Sound Blaster 24 Bit Usb - No Microphone Playback Real Time Kara

Hi,
I don't no if this problem was just discussed in another thread, if so please giveme simply the link...
I'm Italian, so sorry for my poor english or bad translation...
PC: Laptop, "Toshiba Satellite A 200 24E"
OS: "Windows Vista Home Premium Service Pack " - All update done.
Dev.: "External Sound Blaster 24 Bit Usb" - Driver downloaded from Creative Web Site
At the very beginning I tried the internal Sound Card (Realtek) to do karaoke in spare time, but couldn't hear anything coming from Microphone. So I tried to buy an external sound card. The result is the same.
On "Record Device" I can see the Microphone Device, the level is on top, when I speak in the microphone I can see the green bar light up, if I record my voice I can hear myself when I playback, but no sound in real time.
I read that a lot of people have similar problems, but everone solves in a different manner...
I tried:
- I read in other forums advices about to do something like unmute microphone on "Audio playback devices" >> "Speaker" >> "Levels", but I don't see any checkbox, I can see only Speaker Level Bar...
- As read in other websites, to add a registry key (something like EnableInputMonitor in a specific path), but nothing changes. I cannot find other Device, not in Playback Devices, and not in Record Devices.
Please help, all was great with the same microphone, on old Packard Bell Laptop, old Sound Blaster mp3+ usb, and old Windows Xp.
If no solution, I 'm going on buy an old laptop with Windows xp, or an external Mixer, but I'm disappointed on spending more money...

well ?

Sound blaster aud. 2 nx through usb

Similar Messages

Maybe you are looking for