Sound Blaster Audigy 2 ZS + Logitech Z-5500 5.1 Volume is TOOO low. PLEASE H
I have an Audigy 2 ZS and Logitech z-5500 5. speakers. Everything was working fine and one day the volume was reduced to/0 of what it was supposed to be. The speakers are connected with analog cable (yellow/black/green) and all the connections are right (it was working before). I had the same problem when I installed the sound card at first, I just installed the drivers and the volume was way too low. I went to EAX Console and changed a few options and BANG, volume was normal. Some options on EAX will just make the soundcard stop working, like POP will work but ROCK will mute the sound completely (is it a crappy software?). Now I have the same problem, it works but it sounds like a walkman. I tried removing the drivers and installing it again several times, tried system restore and absolutely nothing works. Next step is re-installing windows and exorcising the sound card. Has this happened to anyone out there, I haven't seen any problems like this yet. Thanks
Hey,
I have a simmilar problem, i have a logitech z-680, and as i want to play audio-dvd my left rear channal has a very low sound. I played a bit in setup and it worked, i cleared my harddisc and installed windows and it worked for a few time, but then this happens. I had this problem that the whole left rear channel was quiet while every activity PC-games/normal stereo music but now is this problem only by the audio-dvd. I dont know whether it s an software problem or an hardware defect. But i think the last one is the cause.... I hope some one out there could help us/me
Similar Messages
-
Sound Blaster Audigy + Logitech G51 problem
Before I replaced the motherboard, graphics card, and processor, I had the SB Audigy [8000] version of the software for my Creative Sound Blaster Audigy sound card. All of the new versions I have downloaded, including the old one, are now [BF00]. Also for some reason, the drivers on the CD install [BF00] as well. Previously it didn't. I have the Logitech G5 surround sound speakers, and when I try to use the Matrix mode in-game, only some speakers will work. When I turn off the matrix, it becomes more surround sound, but I still do not hear some things - It shouldn't be doing this when the matrix is not turned on. When the matrix is not turned on, you would only be able to hear from the front left and right speakers only. When not playing a game, the Matrix seems to work fine, however when I don't have it turned on, I still get surround sound. Again, that shouldn't be happening.
The Matrix mode in game seems to not play all of the sounds in-game, and while not in-game, I still get surround sound without the matrix mode on. This shouldn't be happening; I should only be getting the sound from the front left and right speakers when the matrix is not turned on.
Outside of games, when I turn the bass and treble via the sound controls by the time display all the to the max (Not the acutal volume control for the speakers) it sounds garbled. Before this, that wouldn't happen.
Its all worth mentioning that for some reason, my computer does not have the " Audio Device on Definition Audio Bus " driver installed. My computer cannot find the drivers for it though.
With the [8000], when you didn't have the matrix turned on, you would only be able to hear the two speakers in the front. I cannot find the [8000] version online. Does anyone have any idea what the cause of this is?
Any comments are welcome, thank you
Computer specs:
Sound: Creative Sound Blaster Audigy
Speakers: Logitech G5 Surround Sound
Monitor: LG E2350V
Graphics: Asus GTX 460 GB
Motherboard: Gigabyte 870A-UD3
Processor: AMD Phenom II X4 965
OS: Windows XP SP 3I'm having a similar problem as well i've had my card for a year now and its just this high pitched sound. it doesn't happen right away but it happens after a period of time of using sound of any type music, games....it getting iritating and gives me a headache i think we have a simlar problem i've looked into the drivers and i'm not all to sure what i need none seem to mach my needs? does anyone have any idea's please help!
-
Sound Blaster Audigy 2 ZS and Logitech 5.1 Surround So
Hello everyone, this is my first post on these forums, so I thought I'd just start out by saying hello.
I also have a bit of a problem. For the past several months I've had a Sound Blaster Audigy 2 ZS and a set of Logitech X-530 5. Surround Sound speakers hooked up to my computer. For a these past few months, only two of my speakers have been functionable.
I know they're not broken, because I can plug in separate cables into a certain plug and either my two front speakers will work, my two rear speakers will work, or my center speaker will work. And yes I do have the most recent drivers for my card. :P
If anyone would be able to help me with this problem, I would really appreciate it. Thanks!
By the way, here's a picture of the X-530 Speakers I'm using, just in case anybody needs to see them for reference:
http://img53.imageshack.us/img53/2758/b0002wpscg0ss500sclzzzsr.jpgMessage Edited by Triko on 02-26-200706:20 PMTurn on CMSS if you have not done so.
Jason -
Creative Sound Blaster Audigy 2 B4
Ok so as listed above, my current soundcard is a Creative Sound Blaster Audigy 2 B400, now when you google that the card doesnt come up unless its a ZS? My card is NOT a ZS though, its exactly as stated. Anyway, since its almost impossible to find I HAVE found a picture of the back of the card:
http://mayhem.prod.googlepages.com/p...inout-full.jpg
Now on to my question. I'm looking to buy?the Logitech Z-5500 5. surround sound (Digital) for my computer, now, I want to be sure that this card can support two things.
) The digital input itself, my card has a white "Digital" input, so obviously my first guess is yes.
2) This cable: http://www.monstercable.com/productdisplay.asp?pin=600
And if it can support that cable, will it benefit me? Sorry for the trouble, I just dont want to spend the money and not be able to support it. Thanks for the help.Kenttheman wrote:
Ok so as listed above, my current soundcard is a Creative Sound Blaster Audigy 2 B400, now when you google that the card doesnt come up unless its a ZS? My card is NOT a ZS though, its exactly as stated. Anyway, since its almost impossible to find I HAVE found a picture of the back of the card:
http://mayhem.prod.googlepages.com/p...inout-full.jpg
Now on to my question. I'm looking to buy the Logitech Z-5500 5. surround sound (Digital) for my computer, now, I want to be sure that this card can support two things.
) The digital input itself, my card has a white "Digital" input, so obviously my first guess is yes.
2) This cable: http://www.monstercable.com/productdisplay.asp?pin=600
And if it can support that cable, will it benefit me? Sorry for the trouble, I just dont want to spend the money and not be able to support it. Thanks for the help.
By the Creative audio product database, SB0400 = Sound Blaster Audigy 2 Value. You'll find the User's Guide through Support->Product Documentation ... ther're diagrams for connectivity in guide. It's possible you need [url="http://us.creative.com/products/product.asp?category=&subcategory=6&product=780">t his[/url] addon for S/PDIF connections.
jutapa
Message Edited by jutapa on 04-27-2008 04:2 PM -
Hello,
I have brought this Sound Blaster Audigy sometime ago and it makes a screaming horrible noise when i try and talk on ventrilo.
I have uninstalled multiple times, installed drivers, iv done everything i can possibly think of. the current driver is 5.2..608 and it says the Driver date is 20/03/2006.
I took some screenshots of the setup.
[IMG"]http://i20.photobucket.com/albums/b23/CallumPirie/untitled2-.jpg[/IMG]
[IMG"]http://i20.photobucket.com/albums/b23/CallumPirie/untitled-3.jpg[/IMG]
any help would be great?After you reformatted your hard dri've did you install the chipset driver? What OC, XP, Vista?
Dell XPS 600 Intel Pent D 830 3.0ghz
Chipset- Nvidia nForce4 SLI Intel Edition
WD 60gb HD
2gb Ram
DVD-ROM
DVD-RW (Plextor 760A)
Creative XF-I Extreme Music
Logitech X-540 speakers
EVGA 7950GT
Dell 2007WFP (I-SPS panel)
Win XP SP2
BIOS A -
"Sound Blaster Audigy Fx" and stereo mix availability
If I buy/install the "Sound Blaster Audigy Fx" will it add the stereo mix option to my sound properties, also
does this card work on windows 8?
http://www.bestbuy.com/site/creative...&skuId=3287009Re: Sound Blaster Xtreme Audio missing Stereo MixK I think I'm having a similar problem with my Windows 7 Professional system.
I'm am getting sound out of my card.
When I right click on the "speaker" icon in the task bar I see the following list of 5 options
Volume Mixer
Playback Devices
Recording Devices
Sounds
Volume Control Options
However when I click on "playback devices", "Recording Devices" and "sounds" nothing comes up.
What I did do is completely uninstall all traces of any installed Creative software and in the device manager did an uninstall for the SB Xtreme Audio Card.
My recording device is the integrated microphone in the Logitech Quickcam/IM that I have installed. If I go to accessories and click on "sound recorder" it doesn't start up either.
The other issue that I see is that when I go into Control Panel and click on Sounds, nothing happens.
Something is definitely going on but I can't seem to track down the cause. -
Sound blaster Audigy 2zs platinum setup with creative inspire 5.1 digital 5
what should the setup be for the sound blaster Audigy 2zs platinum and the reati've inspire 5. digital 5500 because with the decoder in i only get center fl fr on games. i dont get sound from the rear speakers.but when i take the decoder out and just plug the 3 leads straight into the back of my sound card i get 5. any help plz.i done a thx sound test with the decoder in it does fl i can hear it but i can hear the center as well
and no sound comes out on the 2 rear speakers when doing the test.but when puting the 3 cables straight into the back of the sound card i runed the test and i could hear all the speakers fine even the rear speakers any help plz is this ment 2 happen or do i have to change some settings thanks for any help plz help me thanks.I Have had a problem for ages. I have the Audigy 2 ZS Platinum and Inspire 5. digital 5500.
I have copied the advice I received/didnt recieve from creative.
Best of luck
Dear Martin
Thanks for your reply
I am sorry for the problem you are facing.
To achieve outputs from all the speaker during speaker test, you will need to have an analog connection, or digital DIN connection.
That will be possible if you connect the three line out jacks on your soundcard, to the three audio input (analog jacks->green,black,orange) on your speaker, if it has this connection. Or, you may connect them using Digital DIN, if they have this connection.
If you are using digital connection (coaxial, optical), there will be no way to achieve sound output from all the speakers during 5. speaker test, as they carry stereo signal.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe:
Original Message Follows:
Hi
I understand you must be busy, so no problem.
No I do not hear EAX when in Pro-logic mode. I only hear (depending on the game in question)
Half life two: front left-right and centre. NO rears
Fear: Front, left, right, & centre. No rears
Farcry Front left, right & centre. No Rears
When I run your speaker test HISSSSS, No Rears, no front left or right
Beats me?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 24 January 2006 5:44
To: Martin
Dear Martin
I apologize for the delay on the answer.
If you select Dolby Prologic mode on the decoder, are you able to listen
the game audio, with EAX, in all of the speakers?
Regarding to the optional bay dri've, you can purchase it from ou
Best Regards
(Mod Note: Name Removed)
Original Message Follows:
Hello
Your email was helpful, unfortunately, not for my unit, you see I would
have
connected the Jack leads in by now if the inspire had Jack lead inputs
as
you describe
Please don't think I am being sarcastic, but from reading the
correspondence
below it would seem as if your department is having difficulty
understanding
my problem.
Also it would seem your department doesn't have the necessary technical
information on your very own product, so to help with your dilemma I
have
taken photos of the input/outputs on the Inspire unit.
You will clearly see the inspire has no inputs other than Coaxial and
Optic.
This leaves me back to my last post. I think the solution would be for
me to
purchase the correct processor, which would have come with the original
sound card had I not been a little tight on the money front.
I have attached a photo of the sound card with the processor, I would
love
to buy this processor but find myself unable to locate this product on
your
web site. Would you possibly be able to send me the correct link to this
item so I can buy this Processor Please?
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 8 January 2006 0:3
To: Martin
Subject: RE: CLE -
Dear Martin
Thanks for your reply
Your soundcard is Audigy 2 ZS
Your speaker is Creative Inspire 5. Digital 5500
You will need to have a 3:3 cable(with the color green, black, orange)
to connect your soundcard to your speaker, to achieve the 5. effects
with games.
Below is the connection:
- Connect line out jack of Audigy 2 ZS
to 'Front' of Creative Inspire 5. Digital 5500 using the green color
connection
- Connect line out 2 jack of Audigy 2 ZS
to 'Rear' of Creative Inspire 5. Digital 5500 using the black color
connection
- Connect line out 3 jack of Audigy 2 ZS
to 'Center/Subwoofer' of Creative Inspire 5. Digital 5500 using the
orange color connection
Once you have done the correct connection, play the game DOOM3.
Ensure you have selected either the EAX or surround option in the game
settings.
Does it work?
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
You have lost me. Your sound card clearly states that I can have EAX
surround decoding from the sound card I have purchased.
All of the games on your web site claim to give me an environmental
effect
that will blow my mind, hence EAX.
All I have done wrong is NOT buying your decoder that comes with the
sound
card. My mistake.
All I want to do is re-address this issue and buy the correct
decoder/processor.
Can you point me to the correct link on your web site so I can buy the
correct decoder/processor?
As for the PCM out of the above cables, this foxes me as my other
equipment
only use Optical cabling on my Lexicon processor and from that I have DD
7., DTS 7. and meridian 5. lossless.
My issue is more to do with NO EAX from the rear and centre channels
while
in-game.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 09:3
To: Martin
Subject: RE: CLE - Technical Support Request (KMM887805I6636L0KM)
Dear Martin
Thanks for your reply
All commercial digital connection eg. optical or coaxial cable will only
carry PCM stereo signal. If you want to output the signal to a surround
5. with extra EAX environment effects, it will not be possible at all
since it is only restricted to stereo channel signal.
As per current industry limitations, we are bound to follow the standard
one-signal output for all our SPDIF and Optical output jacks. This is
something that is currently shared by all vendors for all products.
Please note that all games are not dolby digital, even they are , it
will require certain motherboard to encode it to dolby digital signal,
which our soundcard does not support.
You can only use analog connections to gain true 5. surround for
gaming..
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
Hi Joong
I don't fully understand your email, but I do get the gist of what
you're
saying and understand I need to connect the analogue cable to fully
appreciate the sound in EAX.
Would you be able to tell me what product I could buy from your
catalogue
which would marry up with the sound card I have, as I understand now
that
the Inspire 5. will not do the job.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 04:00
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8875697I6636L0KM)
Dear Martin
Thank you for the reply.
Computer games written with support for 3D audio do not require a Dolby
Digital Interacti've Content Encoder (DICE) to output multichannel sound,
with no exceptions. Sound devices that support the real time encoder
technology from Dolby will simply receive the multichannel wave file
output and encode it in real time to a somewhat modified Dolby Digital
bitstream. Creative does not support the Dolby Digital Interacti've
Content Encoder on any of its sound cards.
The only difference between a Sound Blaster card and an audio card that
has a real time encoder, is that you can make a one-wire, digital
connection from your audio card to your home theater receiver and enjoy
discrete multichannel sound from the game. However there will be a
continuous, slight delay, known as "latency", as the encoder is creating
and transmitting the bitstream, and of course the compression scheme
being used is "lossy" (i.e. not bit-accurate).
If you want to enjoy 3D audio in 3D enabled PC games in multichannel
surround sound with a Sound Blaster card, it is recommended that you
connect the analog outputs of the sound card directly to the analog
inputs of the receiver. This will require 3 cables for 5. surround
sound, one for front right and left, one for rear left and right, and
another one for front center and subwoofer. Though it requires more
cables than a real time encoder system, it will not have any latency
issues. When connecting PC audio to a home theater receiver, Creative's
latest sound cards such as Sound Blaster Audigy, Sound Blaster Audigy 2
are likely to provide higher quality audio than any Dolby Digital real
time encode system available for the PC today.
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Please do not use this link to submit technical queries
Original Message Follows:
Hi
One particular game which has "in-game" DD is Farcry; I used this as my
benchmark disc for DD and to push my Nvidia 7800 GTX GPU's (I have tried
it
on friend's machines and they get the full surround effect so I Know
this
version is ok. I also have ALL of the game patches & updates.
I would like to point out that while playing Doom 3, Half Life 2,Fear,
Colin
McRae rally 04,FIFA 2004,Meddle of honour pacific assault, Rome, Shadow
ops, All these games have EAX HD, which is enabled within the options
menu
"in-game", But I do not get ANY use out of the rear's and I might as
well
listen in stereo.
No, inspire 5500 does not automatically switch while "in-game" when DD
is present as you would expect, but does if it was a Movie, which makes
me
think the DD stream isn't getting to the processor.
I originally thought I could put all this to rest if I could buy the
control
panel that would have come with the Sound card if I had not tried to
save
money, but every time I search your accessories site I get completely
lost,
it really isn't user friendly, the sub-menus are very time consuming and
point you in the wrong direction because they are not categorised as Joe
public would understand
I downloaded your TEST Movies and creative demo player utility, ran it
but
still no EAX HD or DD if that were present.
I want to put this card and Processor into my boys computer (which is
the
same Spec as mine and I will update to the FX series, but I am unwilling
if
I cannot find a logical reason why this set-up cannot work first.
Would it have anything to do with the pins on the Digital out on the
sound
card plug, the one I bought and was attached to the last email? Only
sending
certain channels down to the processor?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 5 January 2006 08:09
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8868993I6636L0KM)
Dear Martin
Thanks for your reply
Your speakers are fine as you mentioned that there is sound from all the
speakers when you are playing movie.
May i know what game are you playing when there are no sound from the
rear speakers?
Have you done the appropriate settings in the game to achieve the 5.
sound?
Is there any game patches that you will need to update?
Does the Dolby Digital LED light up when you are playing the game?
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Servic
Original Message Follows:
Hi
I am sorry; I should have said the Inspire 5. was model number digital
5500
S/N SW330030026.
The inspire has these connection on the back of the processor
>From top/back of unit
Audio Outputs
Front
Rear
Centre/subwoofer
Audio inputs
Audio line in
Coaxial
Optical
DIN
The Din to a remotely located Subwoofer which has the speaker leads
inputting into it. Plus power.
Attached is the creative view of the controls menu and I have attached
the
invoice I was sent, it shows the lead I was told to fit.
As I said, I can now hear DD5. while within a movie from ALL speakers
BUT
no sound from rears during IN GAME DD5.
I do not use this PC for films only games.
Regards
Martin
If you are having a digital connection, it is normal for only get only
front left/right is you use the speaker test option.
http://us.creative.com/support/kb/article.asp?l=3&sid=4858
Speaker test only outputs from two front speakers?
You mentioned that that you are unable to get any sound from the rear
speakers when playing game right? May i know are you using a digital
connection? May i know what speaker settings have been made under
Creative Speaker settings?
Do get back to me on the above.
Thanks
Original Message Follows:
Operating System: Windows XP Professional x64 Edition
Creative Model Number: SBO 350
Computer Brand/Model: home made
Processor/CPU: AMD 64
Memory: Gig DDR 4
BIOS Type/Revision: 5. 39
System Board/Chipset: ASUS A8N-SLI Deluxe
Detailed Problem Description:
I have the above Sound card.
I also own Inspire 5. amp/processor
I Wanted to save money by connecting above sound
card to amp/processor
Connections on sound card made life very difficult
I contacted Creative for help. you told me to buy
an RCA to mini jack cord which also has other connections, from your
web site, (I tried to find
the product number for you, but your sub-menu
system is so poor I couldn't locate the RCA/mini
3.5 /to phono link for you) this cord connects
directly into the digital in, on the sound card (3.5 Mini jack) to the
coaxial input on the
inspire 5. amp/processor.
I have enabled ALL sp-diff settings and digital in
setting on every program/utility/kitchen sink and all.
I have an SP-Diff wire from DVD burner to creative
sound card, and yes its enabled and digital only
is selected.
I can play a DVD and see the inspire 5.
automatically change from Pro-logic to Dolby
digital when it See's an AC-3 stream.
when I try and play ANY game you say has EAX
,2,3,4 I cannot get any sound from my rear
speakers (see above in Dolby Digital ALL speakers
work correctly)
when I enter the set-up menu within the creative
software you supply with the sound card and select
5. speaker, digital only, test the speakers via
the white noise function, all i hear is left and
right noise. no centre, no rears.
I phoned you tech support line, the boy on the
phone didn't have much of a clue about your
product and I had to tell him what connections sit
on the inspire 5. series amp/processor.
I want to build another PC for my son, I want to
add the FX series sound card and amp, but i am not
willing to buy anything until i feel you have
helped me to solve this problem first.
please can you help, I am at the end of my tether
with this sound card.
kind regards
Martin Waite
Message Edited by Daniel-CL on 0-28-2006 :36 PM -
Help! Creative Sound Blaster Audigy SE 7.1 Sound Card -
Hello. I've just recieved my new soundcard. It is the Creative Sound Blaster Audigy SE 7. Sound Card - OEM. (Located here: http://www.overclockers.co.uk/showp...atid=&subcat=)
My motherboard is a Asus A8N SLi se.
Now, I have put it in my motherboard, and just tried to install the drivers. I got an error though. It said "No compatible creative product detected." So I downloaded the drivers off the Creative site, and that did not help either. I disabled the onboard sound in the BIOS, and yet it still did not work. I tried plugging in the soundcard into each of the soundcard ports on my motherboard, and none of them detected the card.
I am sick of using onboard, and would like to get this problem fixed.
Some additional information:
The back audio/microphone ports on my motherboard never worked. I have been using the front sockets on my case. I see cables running from my motherboard to the front of my case. Maybe one of those cables need to go into my soundcard in order for it to work? I'm not sure which though, so I didn't try it, just incase.
Here are some screenshots of what I'm getting. They might help.
Drivers from the Creative site: http://img409.imageshack.us/img409/4528/gayap9.jpg
Drivers from the Creative CD: http://img520.imageshack.us/img520/3649/gaycdam5.jpg
Unknown Device in my Device Manager: http://img409.imageshack.us/img409/9924/unknownoj8.jpg
Now, I have no other creative parts in my computer. So this should be the soundcard, right?
Thanks in advanced for any replies.Does the cable from the MB to the front I/O panel simuliar to this one? I installed a Audigy2 ZS in my other system and connected the black cable with the 0 pin connector to the card to use my front phone/mike jacks. Also in your device manager I see the Realtek AC97 still listed. When I installed the XM card in my 600 I disabled it in the BIOS so the entry does not show up in mine just the SB XF-I is displayed.
src="http://i.pbase.com/g6/89/377389/2/79327975.pMK94KJy.jpg" alt="IMG_008.JPG">
Dell XPS 600 Intel Pent D 830 3.0ghz
Chipset- Nvidia nForce4 SLI Intel Edition
WD 60gb HD
2gb Ram
DVD-ROM
DVD-RW (Plextor 760A)
Creative XF-I Extreme Music
Logitech X-540 speakers
EVGA 7950GT
Dell 2007WFP (I-SPS panel)
Win XP SP2
BIOS A -
pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bitscrewguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa -
Creative Sound Blaster Audigy ZS And Vista Driver installation prob
HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julienestebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA -
Vista drivers problems Sound Blaster Audigy 2 ZS Noteb
First thing to do: haveyour systemchecked out, if windows says the hardware is failing there may really be something wrong with it.
If the SB card works in an XP machine there may be a problem in the the PCI slot or controller on the motherboard, either way have a tech shop look at it. If thehardware allchecks out: before putting the card back in completely delete the old driver and software, download the new one without installing it, then put the card in and windows should try to auto-install with the new driver.P.S. the platinum version is the one with thecontrol panel that slots into a dri've bay, if you have one of those, it's a platinum, if not, it's a regulHi all, how are you
I have a Sony VAIO VGN-SZ430N/B notebook, and I'm trying to install Sound Blaster Audigy 2 ZS Notebook on it (Unfortunately, the notebook came with windows vista business from factory).
This notebook has a Texas Instruments PCMCIA controller.
Under "Device Manager" the PCMCIA controller is described as "Texas
Instruments PCI-8x2/7x2/6x2 CardBus Controller", but on Sony's
webpage the driver that seems to be related to it is "Texas
Instruments PCI74 Integrated FlashMedia Controller Driver".
It is kind of all in one solution from Texas Instruments (PCMCIA
controller, Memory Card reader, and Firewire controller).
Please, may someone help me to answer the questions bellow
1)Are there any kind of compatibility problem between this notebook PCMCIA controller (described above), and Sound Blaster Audigy 2 ZS Notebook
2)I've already brought this notebook to Sony's support service, so they could verify if there is any kind of hardware problem with the notebook. Sony's technician wasn't able to find any hardware problems on it, but I'm experiencing the problem described below:
2.)Every time that I plug this sound card on my notebook, and I try to install Creative's latest windows Vista drivers(Creative Sound Blaster Audigy series Vista Driver 2.2.0002), thus It leads me to a Blue Screen during the driver installation process. Please, Does somebody know what could be this problem root causeIt is very weird, even if i try to install this sound card on clean windows vista install, then it leads me to blue screen. Besides, I have another PCMCIA card from another manufacturer, and I was able to install its windows vista drivers with no problem.(It sounds that Creative labs' vista drivers is the problem root cause as I've tested this sound card on a different notebook with windows xp and It worked fine).
3)Does anyone know if creative is planning to release a windows vista driver that allows the users to use all of this sound card featuresSo far the latest driver available doesn't support even DVD-Audio. Have creative labs discontinued this product
I appreciate any help you can give me,
thanks in advance,
Rogerr ZS.The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.
-
SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO
(ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
CONTINUE ON-
Download RAR file with ISO inside and install if you don't have the installation CD
installation cd with EQ download: http://files.filefront.com//;689430;;/
If you do or after you finish downloading goto step A.
A) Take your Creative Driver/Install CD, copy it to your hard dri've.
B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
C) Set it for Windows XP SP2.
D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
E) Restart when told to
F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
Message Edited by jeepbme on 03-08-200708:50 PMestebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA -
Sound Blaster Audigy 2 ZS Platinum Pro Ad_link Cable
Hi,? I have the Sound Blaster Audigy 2 ZS Platinum Pro and my Ad_Link cable has been damaged. I have contacted every on line auction house and everyone in and out of the United States and no one has this cable available. What I am looking for now is one of 2 things;? the specs of this cable (which is not listed in any of the documentation that came with the product, nor is it on the web-site, nor does Customer Support seem to have this information), or a comparable cable that will work in it's place.
Thanks for any help that anyone can offer.
A very frustrated,
JodyHi Joko,
Please check your private message. -
Sound Blaster Audigy with 5.1 Speakers prob
I have 5. speakers with a sound blaster audigy sound card. I've installed all the drivers and additional programs but it looks like my 2 rear speakers are not working. I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't. In the surround mixer i tested the 5. and here are the results:
- Front Left (Sound: OK, Speaker: OK)
- Center (Sound: NO SOUND)
- Front Right (Sound: OK, Speaker: OK)
- Rear Left (Sound: OK, Speaker: NO - The sound comes from the center speaker)
- Rear Right (Sound NO - It sounds very strange... bearly you can understand the words, Speaker: NO - The sound comes from the center speaker)
The wired are set correctly i checked it and I dont know what it might be wrong. Drivers are ok and everything are installed. Help please."I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't."
Does this not indicate two of the speakers are not physically working? Or have a mis-interpreted? -
Can not detect Sound Blaster Audigy 2 on this sys
Im having trouble install drivers (apart from the old CD ones and some out of date ones) all the latest drivers or beta drivers say they cannot detect my card. I have an Sound Blaster Audigy 2 OEM which i bought nearly 2 years ago. I've tried swapping it to a different pci slot but makes no different Constant crashes when playing openal games. Even if i install the lates openal file. But i need to find out why i can't install the newest drivers and why they say i haven't got an audigy 2 when i have. In my device manger even says that its an "Creative SB Audigy 2 (WDM)" My system is as follows...
Windows XP Proffesional SP2 32Bit
P4 3.0ghz
.25Gb DDR 400 Ram
Geforce 6800 Ultra 256Mb
Asustek P4P800-E Deluxe Motherboard
Creative Sound Blaster Audigy 2 OEM
PCTV Rave TV card
Please some one help me, it will be greatly appreciated. If you need anymore info please let me know ( i may uninstall and remove the tv card just to get it off my list of perhaps the audio part of the tv card could be interfering ?)Message Edited by Alexia on -2-2005 :52 PMI am getting the exact same problem. Just downloaded the "Creative Sound Blaster Audigy unified series Beta driver with OpenAL support 2.08.0002" for my soundcard which is an Audigy 2 OEM (Model No. SB0240).
I am using WIndows Media Center Edition 2005, but when I try to install the beta drivers, I get the following error message:
"Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this setup program
Setup will exit."
My Device Manager shows Creative SB Audigy 2 (WDM) with driver version as follows:
Driver Provider: Creative
Driver Date: 23/06/2004
Driver Version: 5.2..444
I am currently hearing sound fine (so the soundcard is installed correctly), but the sound keeps cutting out from games that use OpenAL.
Anyone else getting this problem? How did you fix it's
Maybe you are looking for
-
Opening a Video in Photoshop CS5.1
Hello I'm trying to open a sequence of images (video I guess) saved as a TIF file. When opened with WIndows Photo Viewer, it works fine and allows me to view the frames by using the arrows. Photoshop however opens a single image out of >100, and I c
-
How do I change default page in iTunes
Can not seem to change the iTunes page that appears at opening. I would like to set up the page and NOT change everytime I open. Any Suggestions, Thanks
-
How to get JDeveloper to show package names?
Hi all, Newbie question. I have Java classes organized in different packages, but in the left panel where the classes are shown, the package names are not shown to display which class belongs in which package. Is there an option I can set to get JDev
-
Unable to update data from JSPDynpage using RFC
I have this code in my JSPDynpage public void onSaveButtonClicked (Event event) throws PageException DropdownListBox dListMain = (DropdownListBox) getComponentByName("mydropdown"); DropdownListBox dListEthnicityNew = (Dropdo
-
What's LCRSAPRFC/INTEGRATION_DIRECTORY_HMI's functionality?
Hi! Please help. Thanks! Points guaranteed.