Sound Blaster Audigy 2 ZS Platinum with Vista 64

0Sound Blaster Audigy 2 ZS Platinum with Vista 64Y Hi
I'm considering buying a Sound Blaster Audigy 2 ZS Platinum (with front panel) off ebay, but first I'd like to know if certain features will be compatible with my system. I'm running Vista Home Basic 64bit (hardware is an Asus P5Q-E, Q6600, 2GB of RAM, ATI Radeon HD4850, etc). I'll be using this card for my PC's 5. surround sound system (using the stereo outputs), and more importantly, recording some music. I want to achieve this by using the optical S/PDIF port, as my bass guitar effects board has an S/PDIF output and I've got an S/PDIF cable. I'd also like to use the Line In and Mic inputs. The driver before the latest one for this card said that there was no S/PDIF passthrough for Vista. Has the latest driver got everything I need fixed, so I can just plug it in, install the drivers and then be happily recording through these three inputs?
Thanks for the help?
Message Edited by SuperMaximo on 05-22-2009 2:4 [email protected]

I am brand new to this message system but I am so desperate for help I thought I would try it. After reading lots of comments I find that my problem may be more the rule than the exception. I have an Audigy @ Platinum card and all I ever get from it is crackling and popping. I have been around and around with Creative support but nothing they tell me results in a fix. I am so disgusted at this point that I am ready to just trash the whole thing. I have gone through the BIOS and checked so many settings its a shame. Still crackling and popping. I NEED SPECIFIC ANSWERS FROM SOMEBODY...not just the generic flip the wingle wangle to port xyz and move this to that. here has got to be an answer to this maddening problem. The other thing is that now I can't get my MIDI keyboard to play back. I must have turned something off in the set up process but now I have no idea what to do.
If anyone has any solid answers for me PLEASE come forward with them before I kill someone!

Similar Messages

Capturing laserdisc AC3 signal with Sound Blaster Audigy 2 ZS Platinum

I'm considering converting my laserdisc collection over to DVD.
As far as PC hadware is concerned, I have the ATI All-In-Wonder 9800 Pro and the Sound Blaster Audigy 2 ZS Platinum Pro.
My system in a 3.2G P4 on a Intel D875PBZ board w/ 2Gig of memory. Connected are 3 dri'ves, (2) 250G SATA dri'ves and () old 250G IDE dri've that I keep archi'ves on.
The laserdisc player has the following:
AC-3 Bit Stream / PCM Optical Output AC-3 Bit Stream / PCM Coaxial Output PCM Coaxial Output
I was planning to use the optical input of the soundcard but was unsure what to use to capture the digital stream to capture the entire surround channel info. Normally audio is captured as an uncompressed WAV and then converted to AC3 which to me is a wasted step since it's only going to wind up as AC3 again
I've used Virtual dub in the past to capture TV broadcasts, but I seem to be at a loss on this current venture. Any assistance will be great

Alright, let me just double check...
As long as the output from my laserdisc is 48K then things should work fine and I should receive the entire unadulterated stream, no data padding or modification. If it's not 48k then it won't. This is as long as I save it as 2. PCM audio stream
The audiobitrate for AC3 should be at 384k, and this will be preserved using the above method?
From what I'm reading, this unprocessed stream should sound like white noise. Once processed by cooledit , Soundforge or besweet I should have the DD 5. soundtrack intact and not a 2 channel AC stream?
Sorry if I am rephrasing things but I just want to be absolutly certain when I start this project .
Message Edited by madmax66 on -6-2004 02:40 AM

Creative Sound Blaster Audigy 2 zs Platinum - Smash Party Toda

I have recently spent over $0 thousand dollars on upgrading every computer in my building to Quadcore 64bit vista systems. The only component that remained the same were the Sound Blaster Audigy 2 zs Platinum dri'ves that every system has. I have been up for 2 days trying to figure out why the external dri've will not work at all, for any system. Everyone in the office is giving me grief over the new stuff because of thing, nobody can get their mics to work, or anything on the external dri've to function.
After reading up on the Dan.k story, and creatives deliberate attempts to be as difficult as possible, even to the point of charging me AGAIN, to make a product work (alchemy), I have decided later today were having a little get together at lunch where I will be instructing my employees to remove their sound cards, and smash them. Hey, I can afford it. Its the principle of the matter that bothers me. I used a valid email obviously to get on this forum. Shoot me an email if you don't believe it creative, and ill send you pictures when we're finished.
I have used ONLY creative products for sound since the 90s. I have at home, a closet full of creative products that I have personally upgraded from over the years. I have been a loyal customer for over a decade. Thankfully I found the dan. K story before I finished finding out weather or not the newest creative products work with vista, because Ive had my Credit Card out for 0 hours now just trying to find the right buy. Creative, you lost it big time.
Mike Wilson.
Message Edited by Revolt on 05-2-2008 08:38 AM

As an IT manager, I'd be more inclined to find out who made the decision to implement this change. Then find all the people who were responsible for deploying all of these systems out to users without testing to insure that they worked. All of these people are responsible for countless numbers of resource hours by introducing a non-tested system into your company's user community. Then, I'd introduce them all to the ever increasing base of the unemployed. The $0K hardware investment that you claim to have made is only the beginning, the overall cost of lost human resource hours will prove to be far more significant.

Sound Blaster Audigy 2 ZS Platinum Pro Ad_link Cable

Hi,? I have the Sound Blaster Audigy 2 ZS Platinum Pro and my Ad_Link cable has been damaged. I have contacted every on line auction house and everyone in and out of the United States and no one has this cable available. What I am looking for now is one of 2 things;? the specs of this cable (which is not listed in any of the documentation that came with the product, nor is it on the web-site, nor does Customer Support seem to have this information), or a comparable cable that will work in it's place.
Thanks for any help that anyone can offer.
A very frustrated,
Jody

Hi Joko,
Please check your private message.

Sound Blaster Audigy 2 ZS Platinum Pro Prob

Recently I've purchased the Creative Power Pack Pro 7., it included the <SPAN class=textbluebold>Creative GigaWorks 7. S750
<SPAN class=textbluebold>speakers, and <SPAN class=textbluebold>Sound Blaster Audigy 2 ZS Platinum Pro soundcard. I've installed my Sound Blaster Audigy 2 ZS Platinum Pro card and setup my Sound Blaster GigaWorks S750 speakers but so far after many attempts haven't gotten them to work. I've tried all updates off the Creative site and gone through the cards settings. For some reason in the speaker settings it only lists Headphones, 2., 4. and 5. speaker settings, leaving out 7.. I've checked all plugins and hookups, and am stuck for now. I have a brand new Sony Vaio computer, so i know that my computer is not the problem. I read through all the forms and I was only able to find one other question like mine, one person answered saying that the <SPAN class=textbluebold>Sound Blaster Audigy 2 ZS Platinum Pro is not compatible with 7. speakers. I have no clue why Creative would sell the Audigy 2 ZS Platinum Pro and GigaWorks S750 7. speakers if they are not compatible with each other. Someone please help me. Thanks.

Hi Joko,
Please check your private message.

Microphone Issue - Sound Blaster Audigy 2 ZS Platinum Pro Audio C

Hey there, sorry to post but I've got a little issue which I'm sure is me being stupid but its racking my head so here it comes. I have recently started using talk programs such as vent, skype blah blah to speak to people back home and since moving abroad I have found that now I need the mic to contact these people (which it used to fine before I arri'ved on foreign soil). On clicking on volume control and advance or properties I have nothing in recording for mic and this is where im lost. If I enable the mic on any of the programs people are hearing whatever happens to be coming out of the computer speaks such as games or a movie etc. i've just tried a full removal and reinstallation of the sound drivers for the model in my comp (Sound Blaster Audigy 2 ZS Platinum Pro Audio Card).
All my mates are saying surely you cant lose mic from the volume control but yet its gone and I have no idea how to reactivate it. People seemt o think the card is buggered but it seems fine with everything else I fire out.
Any help on how stupid I'm being would be great.
Thanks in advance.

Hi Joko,
Please check your private message.

Mic2 front panel of sound blaster audigy 2 zs platinum still not worki

anyone..... please help!!!
I have a sound blaster audigy 2 zs platinum, everything is hooked up perfectly including all power cable, and connectors to the front dri've bay. I have a samson q7 microphone that is connected using xlr female to /4" plug to the mic2 jack but I got no input signal. I then tried also using just a /4" to /8" to the back mic port of the PCI, no signal either. My friend said this mic doesn't need any other power like a phantom power or anything
can you please help me!
X

If you're using a dynamic microphone, the Audigy 2 ZS dri've bay has a jumper which you can change for it to support dynamic microphones instead of electret microphones. However once this is done you won't be able to use electret mics until you've changed the jumper setting back.

Sound blaster audigy 2 zs platinum sound probl

Ok So let me give you the specs on my computer first,?Windows xp home editionAbit IN9 32 MAX Mobo2 Gigs corsair xms ram2 8800ultra sli gpusLogitech?z-5300 SpeakersSound blaster audigy 2 zs platinum sound card2 Samsung 500 gig HD?I dont believe that my problem is the same as is in the crackling sound thread. So here is my dilema. Up untill about 4 days ago everything was working fine with my sound system. I have the Logitech speakershooked up to my audigy 2 zs along with my xbox 360 in the optical in on the front plate. So like i said about 4 days ago i started playing a movie on my computer and i have the ac3 codec installed on my computer with comunity codec pack and i know that you could say that those 2 things could be my problem i know enough to know that that probably isnt. So when i played the movie and when to the ac3 codec and turned on dolby decoding so that i would decode it to all my speakers everything worked fine. Then when i turned on spdif decoding my center speaker?started to crackle so i figured it was just becuase i was useing spdif and dolby decoding at the same time. so i turned that off and then went to go play my xbox 360 in which i have pluged into the optical in part on the front plate. Everything had always worked fine for that i have dolby digital decodeing on for the audigy. So i started to play a game i realized that i center speaker was crackling on there too. So i started to realize that no matter what i did the center speaker was crackling. I even changed out the center and sub stereo jack on the card for the front left and right and then they started to crackle in that spot. So i dont know what the hell is going on. Any help would be greatly appreciated i was thinking of restoring my computer but i dont know whether that is necessary. I also dont want to have to go out and by the x-fi elite pro tomarrow unless I absolutely have to.Message Edited by TasteOfChaos on 0-0-20080:02 PM

I am brand new to this message system but I am so desperate for help I thought I would try it. After reading lots of comments I find that my problem may be more the rule than the exception. I have an Audigy @ Platinum card and all I ever get from it is crackling and popping. I have been around and around with Creative support but nothing they tell me results in a fix. I am so disgusted at this point that I am ready to just trash the whole thing. I have gone through the BIOS and checked so many settings its a shame. Still crackling and popping. I NEED SPECIFIC ANSWERS FROM SOMEBODY...not just the generic flip the wingle wangle to port xyz and move this to that. here has got to be an answer to this maddening problem. The other thing is that now I can't get my MIDI keyboard to play back. I must have turned something off in the set up process but now I have no idea what to do.
If anyone has any solid answers for me PLEASE come forward with them before I kill someone!

Sound Blaster Audigy 2 Zs Platinum Pro sound distorti

Hi,First I have tried searching the forum but not found anything helpfull. My setup:?Soundblaster Audigy 2 Zs Platinum ProAsus K8V-VMCambridge megaworks 550 (or similiar name) speakers?anyway, i've just put the above motherboard in as my old one died. Both motherboards have had the same distortion problem. I used to be able to combat it by using the CD provided and put more sound through the back speakers as by default it seems to put everything through the front. This would lessen the distortion and make listening to things bare able but my onboard sound would still be better then my dedicated card. Has anyone found a proper fix for this as a lot of people seem to have trouble with this card?
I would like to add I had this problem from day !! and for a audio setup that cost me ?400 that shouldnt be happening!!! (a long time ago)

Hi Joko,
Please check your private message.

Sound Blaster Audigy 2 ZS Platinum Prob

Hi I recently reinstalled the soundcard and it had problems when I click creative volume control i get the error message "The audio device supported by this application is not detected. The application will exit." and went I uninstalled it freeze at 60%, after that I power down the pc and restart. so I did the Uninstalling
Cleansweep/Uninstalling Sound Blaster given by the tech support. after I restart the pc, and try to install the software again and now it freeze at 95% and the error said software updating please wait for a few mins. did anyone have any idea why. how can I fix this problem.

yingying,
Have you tried uninstalling it in SafeMode?

Sound Blaster Audigy 2 ZS platinum Pro

where i can buy cable connector ADLINK 1 and 2 for my audigy 2 zs platinum pro? i lived in indonesia

Hi Joko,
Please check your private message.

Sound Blaster Audigy 2 ZS Platinum optical in questi

Ok, I think the question is rather simple to answer.
All I want to know is if I can delay the processing of the audio coming in from the optical input.
Reason being is that I have a XBox360, with the HD-DVD add on, and it has a delay with the video when playing HD-DVD's. I use the VGA cable, but I verified I am not the only one with this problem, as it turns out it's with the display. (Just plain weird IMO) but delaying the audio processing would allow a proper sync of audio and video.

I am brand new to this message system but I am so desperate for help I thought I would try it. After reading lots of comments I find that my problem may be more the rule than the exception. I have an Audigy @ Platinum card and all I ever get from it is crackling and popping. I have been around and around with Creative support but nothing they tell me results in a fix. I am so disgusted at this point that I am ready to just trash the whole thing. I have gone through the BIOS and checked so many settings its a shame. Still crackling and popping. I NEED SPECIFIC ANSWERS FROM SOMEBODY...not just the generic flip the wingle wangle to port xyz and move this to that. here has got to be an answer to this maddening problem. The other thing is that now I can't get my MIDI keyboard to play back. I must have turned something off in the set up process but now I have no idea what to do.
If anyone has any solid answers for me PLEASE come forward with them before I kill someone!

Sound Blaster Audigy 2 ZS Platinum Pro Mic/Codec problem

Okay, I'm running a ZS Plat Pro and I'm having some problems with my mic settings for some reason. Here's the deal:
My headphones are plugged into my external hub with the mic into the Line In slot. I have sound, theres power, that's all good. The problem lies with my microphone settings somewhere, I dunno where, with a possible codec problem I'm guessing. Here's why.
I can't get ANYTHINGto pick up in my mic. All the settings are correct in Control Panal and in my Creative Volume Control. Line In is selected for Recording, the volume is up, it's not muted, my headset is not muted, and the gain is turned on on my external hub, yet still nothing. Here is where hopefully someone can help. I can get it to work in Ventrilo when I go into setup. In setup to test with, I have to select a Codec from a list to use to test with. Meaning, there is NO current selected codec to test with. Once I select one, it works.
What I'm guessing is somehow, my computer doesn't have a current codec selected for my mic to work with. IE: MSN, Yahoo, Windows Sound Recorder, control panal/sound and audio/test hardware... they all come up detecting no sound at all, when in FACT, I know it works in Ventrilo when I select a codec.
I've uninstalled and reinstalled the card with up to date drivers. Can anyone help at all please? Thank you.

Hi Joko,
Please check your private message.

NO Dolby Digital or DTS- Sound Blaster Audigy 2 ZS Platinum

So after doing a clean install from Win XP to 7 PRO I now no longer can get dolby digital or dts through my speakers via toslink (optical, whatever u want to call it) . I have the latest win 7 drivers, tried reinstalling drivers using compatability mode (vista sp2), and configured it to play on on only digital outputs, spidf decode, set spdif output as my default device, set speakers to 5., and all combinations of that.
I am also using the k lite codec pack and playing videos using media player classic.
However, If i test dolby digital through? windows sound options it will detect and play the sample sound in dolby digital but my movies, etc will not when play through MPC.
PLEASE HELP!

? You are needing to do AC-3 passthrough and you may want to use the Shark Codec Pack instead of K-Lite. Instructions for Shark's pack are here:
http://shark007.net/forum/Thread-problem-spdif-passthrough-x-fi-decoder-Win7

Headphone issues-Sound Blaster Audigy 2 ZS Platinum Pro, DR release 1.84

I have some issues with my headphones. Before I can plug my headphones in and the speakers shut down and I hear the sounds through the headphones and now when I plug in the headset speakers still stay on and can hear the sounds on both the speakers and headset. Can anyone help with this issue? It would be greatly appreciated!

hello
go to the control panel , "AudioHQ" icon , and select "device control" , and "headphone In" , here you can select your headphone configuration
++++

Sound Blaster Audigy 2 ZS Platinum with Vista 64

Similar Messages

Maybe you are looking for