Sound Blaster Audigy and STAL

I've got the following problem. In game called "S. T.A.L.K.E.R" i can hear very lound sounds of shooting and very silence people conversations.
I've got "Sound Blaster Audigy" and Creative Speakers.

Hi,
There are several choices if it comes to Audigy (emu0kx) drivers;
First you can use the last official Creative Labs' driver for the Audigy series which you can download on the official driver download site here at Creative Labs' site, but you will loose a lot of apps/softwares, but it should work;
The second one would be the mentioned Daniel_K's driverpack 3.8 for the Audigy series which works pretty good, although I dislike the individual installers/uninstallers for each applications which makes uninstallation of the driver very annoying.
The third one would be the Project KX driver which is very light in size but very powerful, especially for recording and other music related purposes. There's a learning curve since it really looks different (interfaces for example), but once you have found out how the KX driver works you will be happy you own an genuine Audigy emu0kx soundcard.

Similar Messages

I Just installed my sound blaster audigy and cant record noth

i tried everything, when i tested the soundblaster hardware it didnt pick up nothing, then i put the mic in the stock recorder input,tested that hardware on my computer and that one worked. on my adobe audition(studio recording software) i changed the recording software to the soundblaster but still getting the same results..
HELP!!!
i tried re installing the drivers but nothing works and i know for sure its not the mike
AHHHHH

Hmm... you could st check if the SB is set as preferred play/recording device in system audio settings (start run mmsys.cpl) and then as suggested by creative, disable the onboard audio system. If still not working then, check the settings in surround mixer (or windows play/recording control panels) .. used source channel opened and recording source set properly. jutapa

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

(ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
CONTINUE ON-
Download RAR file with ISO inside and install if you don't have the installation CD
installation cd with EQ download: http://files.filefront.com//;689430;;/
If you do or after you finish downloading goto step A.
A) Take your Creative Driver/Install CD, copy it to your hard dri've.
B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
C) Set it for Windows XP SP2.
D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
E) Restart when told to
F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
Message Edited by jeepbme on 03-08-200708:50 PM

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Sound Blaster Audigy Drivers and Applications CD-Rom

Does anyone know where I can get or download?the "Sound Blaster Audigy" "Drivers and applications" CD-rom?
I have included a pic below:
<img alt="cd-rom" src="http://www.geocities.com/pershingbpa/soundblastercd.jpg" align="left[/img] width="70" height="705">

jay23,
First extract the RAR file you downloaded using WinRar. During the extraction, WinRar will create an ISO file which is an image of the installation CD. If you don't want to burn that ISO file to a CD, then download and install MagicDisc from the link I gave above. MagicDisc lets you mount an ISO file as a virtual hard dri've. You should be able to install from that virtual CD just as if it were a real hard copy CD, but I've never tried that so can't say for certain.

"Sound Blaster Audigy Fx" and stereo mix availability

If I buy/install the "Sound Blaster Audigy Fx" will it add the stereo mix option to my sound properties, also
does this card work on windows 8?
http://www.bestbuy.com/site/creative...&skuId=3287009

Re: Sound Blaster Xtreme Audio missing Stereo MixK I think I'm having a similar problem with my Windows 7 Professional system.
I'm am getting sound out of my card.
When I right click on the "speaker" icon in the task bar I see the following list of 5 options
Volume Mixer
Playback Devices
Recording Devices
Sounds
Volume Control Options
However when I click on "playback devices", "Recording Devices" and "sounds" nothing comes up.
What I did do is completely uninstall all traces of any installed Creative software and in the device manager did an uninstall for the SB Xtreme Audio Card.
My recording device is the integrated microphone in the Logitech Quickcam/IM that I have installed. If I go to accessories and click on "sound recorder" it doesn't start up either.
The other issue that I see is that when I go into Control Panel and click on Sounds, nothing happens.
Something is definitely going on but I can't seem to track down the cause.

Vista and Sound Blaster Audigy

Okay I am getting desperate. I have been searching all over for this odd occurence but I havent found anything. I am running a dual core amd processor with Vista 64-bit, 4 GB RAM, and a Sound Blaster Audigy. I purchased this card off of ebay, so I dont exactly know the model (it is the one with a firewire ( ) port on the actual card, and a tan/white i/o box that goes in my cd dri've bay; the box just plainly says Soundblaster Audigy). Anyway, the card had been working great with the drivers at first, and I then had a kernal file fail on me. Well, after recovering successfully with the Windows disc, I came back to find out my drivers had messed up. I tried many combinations of uninstalls/reinstalls, different packages, etc and nothing seems to work. However, the odd part is that sound works within the windows environment (system sounds/clicks/etc), and also through the line in on the breakout box, AND in FLStudio/Reason/Windows Media Player. However, I am not able to get sound through flash movies, Winamp, PC Games, and media things of the sort. I was wondering if anyone else has had this odd occurence, and knew how to fix it. Thank you.
PS
The error I get on Winamp is Bad Directsound driver. Please install proper drivers or select another device in configuration. (I have also messed around with the Winamp output with no luck).

http://forums.creative.com/showthread.php?=3033
Try here.
the above driver pack from Daniel Kawakami is top notch and works very well. Good bass response and I NEVER had a problem when using these in XP, Vista, Vista sp and later Vista 64 Sp and 2.
cheers,
jmacguire

Sound Blaster Audigy 2 ZS and Logitech 5.1 Surround So

Hello everyone, this is my first post on these forums, so I thought I'd just start out by saying hello.
I also have a bit of a problem. For the past several months I've had a Sound Blaster Audigy 2 ZS and a set of Logitech X-530 5. Surround Sound speakers hooked up to my computer. For a these past few months, only two of my speakers have been functionable.
I know they're not broken, because I can plug in separate cables into a certain plug and either my two front speakers will work, my two rear speakers will work, or my center speaker will work. And yes I do have the most recent drivers for my card. :P
If anyone would be able to help me with this problem, I would really appreciate it. Thanks!
By the way, here's a picture of the X-530 Speakers I'm using, just in case anybody needs to see them for reference:
http://img53.imageshack.us/img53/2758/b0002wpscg0ss500sclzzzsr.jpgMessage Edited by Triko on 02-26-200706:20 PM

Turn on CMSS if you have not done so.
Jason

Sound Blaster Audigy 2 ZS: Listen and play separate trac

Hi,
I recently purchased the Creative Sound Blaster Audigy 2 ZS card for my laptop, however I was wondering if it is possible to play one track and listen to a separate track while the first is playing. The reason being i am using the laptop for mobile dj'ing, so really want to queue up the next track before playing it blindly. If someone could let me know if it's possible and if so how to do it, that'd be much appreciated. Thanks,?Jason

As you mentioned laptop, I assume you are speaking?of Audigy 2 Zs Video Edition (USB) or Notebook (PCMCIA)?None?of?Audigys?is?good for this type of use?but, you could try with some DJ software as like the Nati've Instruments Traktor in ASIO mode.- http://www.nati've-instruments.com/index.php?id=djline?(demo available)?jutapa

Sound blaster Audigy LS, creative media center and creative playcenter wont install on

Hello. I have a sound blaster Audigy LS card in my computer, it came as a bundle in my Sony Vaio that I bought in october of last year. I wanted to download the creative media center, or the creative playcenter. I went through the process of downloads and support and tried to run them on my computer it either says Setup is unable to detect supported product on your system. Click retry button to redirect your device and continue the installation. I've tried clicking retry and and the same message comes up. I have Screenblast Sound Forge . for VAIO and Screenblast ACID 4.0 for VAIO and wonder if thos two audio programs (came with the computer also) are in conflict with installing creative products? The operating system i am using is windows xp media center edition version 2002. Thanks in advance for anyone that can help me.

Hi All,
I am pretty much in the same boat but with an Audigy 2 Value Sound Card.
Removed some old piece of rubbish card (6MB Aztech PCI 288 Q3D using a Trident 4DWave-NX Chip.... yes about 6 yrs old !) in my daughters pc and replaced it with the new one.
Same error message i.e. hardware not detected... ihave already posted as im trying to find and install the right drivers. I have also tried the PCI-slot hopping etc etc.
So what next people ?

Audio and video skip after installing USB Sound Blaster Audigy 2

Hi community,?Since installing my USB Sound Blaster Audigy 2 NX, audio and video skip when being played with either windows media player, winamp, iTunes, neroshow, winDVD 7, creatives own media players etc. in fact anything I can try, won't work. Games are fine, in fact the sound is brilliant. I'd be really grateful for any feedback on this, not being able to listen to music is driving me crazy. Thanks.

Hello thebro90,I had the same problem.After tryed everything, uninstall, reinstall audio drivers, etc, I finally manage to solved it by updating the CPU drivers... I have a AMD Atlhon X2 4800+Never had the problem again.Best regards.
S?rgio

Help! Sound Blaster Audigy - bass and tre

Hello! I had a Sound Blaster Audigy. There are any problems in the control with the Creative Surround Mixer. It cannot to set the bass and treble. Why and what is problem with it's Thank you!?Problem with the Sound Blaster Audigy - bass and treblehttp://icq299885550.mysinamail.com/Photo/Creative.jpghttp://icq299885550.mysinamail.com/Photo/Creative2.jpg?Message Edited by mrchan2002 on -7-20062:27 AM

What's the model number of your soundcard? Certain series of Sound Blaster doesn't support adjusting bass and treble so you have to use the Graphic Equalizer software instead to adjust it.
Jason

PCMCIA Sound Blaster Audigy 2 ZS, connection to Mixer in and out

I have a PCMCIA Sound Blaster? Audigy? 2 ZS card attached to a laptop. I want to connect this laptop to a Denon X300 Mixer (http://www.platinum-records.com/Deno...0-prod7243.htm) so that I can untilize music on the laptop dri've, into the mixer board. Then I would like to stream this music back into the Computer for recording/manipulating on the laptop.
I think I have the link to the mixer figured out (use provided cable and a mini plug to RCA patch to the line in on the X300 Mixer) but the link back to the computer I am having issues with. Any Suggestions appreciated!
Spindu

dilip wrote:
Hi I have PCMCIA Sound Blaster Audigy 2 ZS Notebook audio card with my Thinkpad laptop. I have bought Onkyo HT- S580 Hometheater system. I was hoping to connect the Line out, Line out2, Line out3 jacks to the receiver's Front, Surround(rear) and Center in jacks. The color on the Onkyo Recei'ver end are Center - Green , Surround(rear) - Blue , Front - White The color on the Creative Card end are Center- Orange , rear - Black , Front - Green There is color difference between these two ends . Is it advisable to connect these two jacks ? Please recommend the suitable cable type and name for this connection Thanks
Hi
Colours may vary --> just connect by the instructions from both manuals.
There are good explanations for
- Stereo and 4-Pole Jack Diagrams
- Connecting a multichannel home theater receiver
- cabletypes needed on connections
on User's Guide.
NOTE: This User's Guide can be found on your driver CD too.
Also, here is the Onkyo HT-S580 manual.
jutapaMessage Edited by jutapa on 0-0-2006 03:32 AM

Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bit

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

Vista drivers problems Sound Blaster Audigy 2 ZS Noteb

First thing to do: haveyour systemchecked out, if windows says the hardware is failing there may really be something wrong with it.
If the SB card works in an XP machine there may be a problem in the the PCI slot or controller on the motherboard, either way have a tech shop look at it. If thehardware allchecks out: before putting the card back in completely delete the old driver and software, download the new one without installing it, then put the card in and windows should try to auto-install with the new driver.P.S. the platinum version is the one with thecontrol panel that slots into a dri've bay, if you have one of those, it's a platinum, if not, it's a regulHi all, how are you
I have a Sony VAIO VGN-SZ430N/B notebook, and I'm trying to install Sound Blaster Audigy 2 ZS Notebook on it (Unfortunately, the notebook came with windows vista business from factory).
This notebook has a Texas Instruments PCMCIA controller.
Under "Device Manager" the PCMCIA controller is described as "Texas
Instruments PCI-8x2/7x2/6x2 CardBus Controller", but on Sony's
webpage the driver that seems to be related to it is "Texas
Instruments PCI74 Integrated FlashMedia Controller Driver".
It is kind of all in one solution from Texas Instruments (PCMCIA
controller, Memory Card reader, and Firewire controller).
Please, may someone help me to answer the questions bellow
1)Are there any kind of compatibility problem between this notebook PCMCIA controller (described above), and Sound Blaster Audigy 2 ZS Notebook
2)I've already brought this notebook to Sony's support service, so they could verify if there is any kind of hardware problem with the notebook. Sony's technician wasn't able to find any hardware problems on it, but I'm experiencing the problem described below:
2.)Every time that I plug this sound card on my notebook, and I try to install Creative's latest windows Vista drivers(Creative Sound Blaster Audigy series Vista Driver 2.2.0002), thus It leads me to a Blue Screen during the driver installation process. Please, Does somebody know what could be this problem root causeIt is very weird, even if i try to install this sound card on clean windows vista install, then it leads me to blue screen. Besides, I have another PCMCIA card from another manufacturer, and I was able to install its windows vista drivers with no problem.(It sounds that Creative labs' vista drivers is the problem root cause as I've tested this sound card on a different notebook with windows xp and It worked fine).
3)Does anyone know if creative is planning to release a windows vista driver that allows the users to use all of this sound card featuresSo far the latest driver available doesn't support even DVD-Audio. Have creative labs discontinued this product
I appreciate any help you can give me,
thanks in advance,
Rogerr ZS.

The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.

Sound Blaster Audigy and STAL

Similar Messages

Maybe you are looking for