Sound Blaster Audigy + Logitech G51 problem

Before I replaced the motherboard, graphics card, and processor, I had the SB Audigy [8000] version of the software for my Creative Sound Blaster Audigy sound card. All of the new versions I have downloaded, including the old one, are now [BF00]. Also for some reason, the drivers on the CD install [BF00] as well. Previously it didn't. I have the Logitech G5 surround sound speakers, and when I try to use the Matrix mode in-game, only some speakers will work. When I turn off the matrix, it becomes more surround sound, but I still do not hear some things - It shouldn't be doing this when the matrix is not turned on. When the matrix is not turned on, you would only be able to hear from the front left and right speakers only. When not playing a game, the Matrix seems to work fine, however when I don't have it turned on, I still get surround sound. Again, that shouldn't be happening.
The Matrix mode in game seems to not play all of the sounds in-game, and while not in-game, I still get surround sound without the matrix mode on. This shouldn't be happening; I should only be getting the sound from the front left and right speakers when the matrix is not turned on.
Outside of games, when I turn the bass and treble via the sound controls by the time display all the to the max (Not the acutal volume control for the speakers) it sounds garbled. Before this, that wouldn't happen.
Its all worth mentioning that for some reason, my computer does not have the " Audio Device on Definition Audio Bus " driver installed. My computer cannot find the drivers for it though.
With the [8000], when you didn't have the matrix turned on, you would only be able to hear the two speakers in the front. I cannot find the [8000] version online. Does anyone have any idea what the cause of this is?
Any comments are welcome, thank you
Computer specs:
Sound: Creative Sound Blaster Audigy
Speakers: Logitech G5 Surround Sound
Monitor: LG E2350V
Graphics: Asus GTX 460 GB
Motherboard: Gigabyte 870A-UD3
Processor: AMD Phenom II X4 965
OS: Windows XP SP 3

I'm having a similar problem as well i've had my card for a year now and its just this high pitched sound. it doesn't happen right away but it happens after a period of time of using sound of any type music, games....it getting iritating and gives me a headache i think we have a simlar problem i've looked into the drivers and i'm not all to sure what i need none seem to mach my needs? does anyone have any idea's please help!

Similar Messages

  • Sound Blaster Audigy 2 ZS Problem: Static no

    For some reason since I've switched from my Sound Blaster Audigy card to my new Sound Blaster Audigy 2 ZS card, I've been getting a 'static' noise in the background of my speakers. I'm not sure why it would be causing this, and I've already updated my drivers off the creative website, so I'm not sure what my next step will have to be, so I decided to post here and see if anyone knew maybe?

    I'm having a similar problem as well i've had my card for a year now and its just this high pitched sound. it doesn't happen right away but it happens after a period of time of using sound of any type music, games....it getting iritating and gives me a headache i think we have a simlar problem i've looked into the drivers and i'm not all to sure what i need none seem to mach my needs? does anyone have any idea's please help!

  • Creative Sound Blaster Audigy SE Strange Problem

    Hi,
    I have a strange problem with my Creative Audigy SE, It happened suddenly.So, if I want to configure my headset on the audio control panel and choose headphones (the default speaker settings are 7.1 surround, every time when I start my PC ) i have no sound, but if i return to 7.1 settings the sound is back.
    Thanx and sorry for my bad english

    I would start by disabling the on board sound in your BIOS if you are not going to use it.  As a novice user much of the documentation kind of covers the simpler case and this might help you navigate them better.
    Keep in mind the Audigy SE is not a real Audigy (like Audigy 2 which has very good linux support).  If you are just looking for straightforward playback you should have no trouble, but you will not get hardware mixing with SE IIRC.

  • Sound Blaster Audigy 2 ZS and Logitech 5.1 Surround So

    Hello everyone, this is my first post on these forums, so I thought I'd just start out by saying hello.
    I also have a bit of a problem. For the past several months I've had a Sound Blaster Audigy 2 ZS and a set of Logitech X-530 5. Surround Sound speakers hooked up to my computer. For a these past few months, only two of my speakers have been functionable.
    I know they're not broken, because I can plug in separate cables into a certain plug and either my two front speakers will work, my two rear speakers will work, or my center speaker will work. And yes I do have the most recent drivers for my card. :P
    If anyone would be able to help me with this problem, I would really appreciate it. Thanks!
    By the way, here's a picture of the X-530 Speakers I'm using, just in case anybody needs to see them for reference:
    http://img53.imageshack.us/img53/2758/b0002wpscg0ss500sclzzzsr.jpgMessage Edited by Triko on 02-26-200706:20 PM

    Turn on CMSS if you have not done so.
    Jason

  • Vista drivers problems Sound Blaster Audigy 2 ZS Noteb

    First thing to do: haveyour systemchecked out, if windows says the hardware is failing there may really be something wrong with it.
    If the SB card works in an XP machine there may be a problem in the the PCI slot or controller on the motherboard, either way have a tech shop look at it. If thehardware allchecks out: before putting the card back in completely delete the old driver and software, download the new one without installing it, then put the card in and windows should try to auto-install with the new driver.P.S. the platinum version is the one with thecontrol panel that slots into a dri've bay, if you have one of those, it's a platinum, if not, it's a regulHi all, how are you
    I have a Sony VAIO VGN-SZ430N/B notebook, and I'm trying to install Sound Blaster Audigy 2 ZS Notebook on it (Unfortunately, the notebook came with windows vista business from factory).
    This notebook has a Texas Instruments PCMCIA controller.
    Under "Device Manager" the PCMCIA controller is described as "Texas
    Instruments PCI-8x2/7x2/6x2 CardBus Controller", but on Sony's
    webpage the driver that seems to be related to it is "Texas
    Instruments PCI74 Integrated FlashMedia Controller Driver".
    It is kind of all in one solution from Texas Instruments (PCMCIA
    controller, Memory Card reader, and Firewire controller).
    Please, may someone help me to answer the questions bellow
    1)Are there any kind of compatibility problem between this notebook PCMCIA controller (described above), and Sound Blaster Audigy 2 ZS Notebook
    2)I've already brought this notebook to Sony's support service, so they could verify if there is any kind of hardware problem with the notebook. Sony's technician wasn't able to find any hardware problems on it, but I'm experiencing the problem described below:
    2.)Every time that I plug this sound card on my notebook, and I try to install Creative's latest windows Vista drivers(Creative Sound Blaster Audigy series Vista Driver 2.2.0002), thus It leads me to a Blue Screen during the driver installation process. Please, Does somebody know what could be this problem root causeIt is very weird, even if i try to install this sound card on clean windows vista install, then it leads me to blue screen. Besides, I have another PCMCIA card from another manufacturer, and I was able to install its windows vista drivers with no problem.(It sounds that Creative labs' vista drivers is the problem root cause as I've tested this sound card on a different notebook with windows xp and It worked fine).
    3)Does anyone know if creative is planning to release a windows vista driver that allows the users to use all of this sound card featuresSo far the latest driver available doesn't support even DVD-Audio. Have creative labs discontinued this product
    I appreciate any help you can give me,
    thanks in advance,
    Rogerr ZS.

    The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.

  • Sound blaster Audigy 2 zs gamer problem!

    (Sound blaster Audigy 2 zs gamer problem!? I had a recent problem recently that caused Windows not to load at all. After getting that fixed and the computer back home I have run into a sound issue. None of the Creative's Media Source programs would work properlly. When clicked on I would get the error that the program has encountered an error and needs to close. Finally un-installed all creative programs and related software and went through the re-install process. Encountered an error that program could not load because plxcore.plx cannot be found. I went through the solution listed on?Creative's web site to fix the?issue and none of fixes worked. Recently deleted everything Creative again by uninstalling all drivers and going through the installshield folder and deletd all creative related items. Went through the install process again. Had the plx error, fixed it and had sound but had the same problems with the Media SOurce as before. Went to Creative's web site through auto updater for a new driver and other essential items needed for my sound. Back to no sound again. Under Windows control panel under sounds and audio devices under volume tab, it will not even let me select the speaker setting or place the volume control on the task bar. @99.3.9.75

    Brettpopp
    Try updating your BIOS to the latest and have the sound card tested on another machine to see if it is still functioning.
    Jason

  • Creative Sound Blaster Audigy SE problems

    Alright first of all I am new to Linux in general.
    I have two soundcards in my computer. One is an onboard card (Intel) that is faulty and doesn't work; another is a Creative Sound Blaster Audigy SE which does work.
    My problem, of course, is getting the latter to work.
    So I realize this is nothing new, searching the forums and reading ALSA's wiki. However there seems to be some issues with making this work on ALSA, so is there a way to configure this with OSS?
    "lspci | grep audio" returns both soundcards:
    00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
    01:00.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster
    "ossdetect -v" returns:
    Detected Sound Blaster Audigy LS / Live7.1
    Detected Intel AC97 (ICH5)
    USB support available in the system, adding USB driver
    Detected Generic USB audio/MIDI device (BETA)
    I use "soundoff" and "soundon", then "osstest":
    Sound subsystem and version: OSS 4.1 (b 1052/200903241101) (0x00040100)
    Platform: Linux/i686 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
    *** Scanning sound adapter #-1 ***
    /dev/oss/oss_audigyls0/pcm0 (audio engine 0): AudigyLS front
    - Performing audio playback test...
      <left> Device returned error: Input/output error
    /dev/oss/oss_audigyls0/pcm1 (audio engine 2): AudigyLS center/lfe
    - Performing audio playback test...
      <left> Device returned error: Input/output error
    /dev/oss/oss_audigyls0/pcm2 (audio engine 3): AudigyLS surround
    - Performing audio playback test...
      <left> Device returned error: Input/output error
    /dev/oss/oss_audigyls0/pcm3 (audio engine 4): AudigyLS 5.1 output
    - Skipping multi channel device
    *** Scanning sound adapter #1 ***
    /dev/oss/oss_ich0/pcm0 (audio engine 9): Intel ICH5 (24D5)
    - Performing audio playback test...
      <left> OK <right> OK <stereo> OK <measured srate 47982.00 Hz (-0.04%)>
    *** Some errors were detected during the tests ***
    Basically it seems like it detects the crappy onboard sound (which is unusable, I stress) and not my soundcard. I really don't know how to fix/configure this and sound is really important to me if I'll be using Arch.
    Thanks for any help offered, if more information about something is needed I'll be more than happy to oblige.

    I would start by disabling the on board sound in your BIOS if you are not going to use it.  As a novice user much of the documentation kind of covers the simpler case and this might help you navigate them better.
    Keep in mind the Audigy SE is not a real Audigy (like Audigy 2 which has very good linux support).  If you are just looking for straightforward playback you should have no trouble, but you will not get hardware mixing with SE IIRC.

  • Sound Blaster Audigy Problem

    Ok I am finally stumped.
    Specs
    KT800Neo
    Athlon 64 3200+
    512MB 400Mhz DDR
    2 x 120GB Segate HD
    AIW 9800 Pro
    Win XP Pro Sp 1
    Sound Blaster Audigy Platinum
    MSI 52x32x52 CD-RW
    TDK DVD Recorder
    I have tried a million ways to get this stupid soundcard to work, and to no avail.
    I downloaded the newest drivers from soundblaster.com and it says it can't even detect the audigy however it shows up in my unknown device detecter.  I tried other Audigy drivers that have been unified for 5.1 plat & audigy plat.  Same results.  I then went to my old install CD that came with the sound card and it works.  However my live drive is not being enabled for some reason.  I have tried hooking up a 5.1 Live Drive and nothing as well.
    I don't have any sound drivers for anything onboard releated installed.
    I tried the Kx Drivers for giggles and they installed and even got closer with my Inspire 6.1's working a bit better, however live drive still not working correctly.
    My 1394 Net Adapter 1 & 2 are not loaded (drivers) ! mark by the both of them, they tell me to run the trouble shooter 2 says the device drive couldn't load due to old install being in the system, however I have removed these devices before and tried to do something.
    ATM I really need to get this sound card functional so any suggestions are appreciated.
    Thanks

    First time in my life a motherboard worries me before I start playing with it.  I have been waiting for my K8T Neo to arrive for two weeks and had time to read numerous reviews and forum.
    I validated almost every piece of hardware I’m using, including the sound card (Sound Blaster Audigy Platinum) against the list of hardware tested in MSI’s test report.  My sound card was supposed to be supported but we all know the story…
    Anyway, I was pleased when I booted for the first time my PC (after disabling the onboard sound) to succeed where many of us failed.  I even managed to install Windows XP SP1 without any trouble.  I also installed all the latest versions of the drivers, except for my Audigy, for which I installed the driver that came on the accompanying CD.  I had no trouble with the stereo sound.
    Trouble came when I tested the surround sound.  I experienced the same thing as goretexpretzels: no sound from the rear channels…  I then updated with the latest version of the drivers/mixer but same crap.  
    I will perform some tests and try with a non-SP1 version of XP to see if it resolves the problem, but I sincerely hope that MSI will come out with a BIOS patch or a workaround before long.
    I’m already starting to regret for not having stayed with Abit after all those years of reliable computing…

  • "Sound Blaster Audigy Fx" and stereo mix availability

    If I buy/install the "Sound Blaster Audigy Fx" will it add the stereo mix option to my sound properties, also
    does this card work on windows 8?
    http://www.bestbuy.com/site/creative...&skuId=3287009

    Re: Sound Blaster Xtreme Audio missing Stereo MixK I think I'm having a similar problem with my Windows 7 Professional system.
    I'm am getting sound out of my card.
    When I right click on the "speaker" icon in the task bar I see the following list of 5 options
    Volume Mixer
    Playback Devices
    Recording Devices
    Sounds
    Volume Control Options
    However when I click on "playback devices", "Recording Devices" and "sounds" nothing comes up.
    What I did do is completely uninstall all traces of any installed Creative software and in the device manager did an uninstall for the SB Xtreme Audio Card.
    My recording device is the integrated microphone in the Logitech Quickcam/IM that I have installed. If I go to accessories and click on "sound recorder" it doesn't start up either.
    The other issue that I see is that when I go into Control Panel and click on Sounds, nothing happens.
    Something is definitely going on but I can't seem to track down the cause.

  • Help! Creative Sound Blaster Audigy SE 7.1 Sound Card -

    Hello. I've just recieved my new soundcard. It is the Creative Sound Blaster Audigy SE 7. Sound Card - OEM. (Located here: http://www.overclockers.co.uk/showp...atid=&subcat=)
    My motherboard is a Asus A8N SLi se.
    Now, I have put it in my motherboard, and just tried to install the drivers. I got an error though. It said "No compatible creative product detected." So I downloaded the drivers off the Creative site, and that did not help either. I disabled the onboard sound in the BIOS, and yet it still did not work. I tried plugging in the soundcard into each of the soundcard ports on my motherboard, and none of them detected the card.
    I am sick of using onboard, and would like to get this problem fixed.
    Some additional information:
    The back audio/microphone ports on my motherboard never worked. I have been using the front sockets on my case. I see cables running from my motherboard to the front of my case. Maybe one of those cables need to go into my soundcard in order for it to work? I'm not sure which though, so I didn't try it, just incase.
    Here are some screenshots of what I'm getting. They might help.
    Drivers from the Creative site: http://img409.imageshack.us/img409/4528/gayap9.jpg
    Drivers from the Creative CD: http://img520.imageshack.us/img520/3649/gaycdam5.jpg
    Unknown Device in my Device Manager: http://img409.imageshack.us/img409/9924/unknownoj8.jpg
    Now, I have no other creative parts in my computer. So this should be the soundcard, right?
    Thanks in advanced for any replies.

    Does the cable from the MB to the front I/O panel simuliar to this one? I installed a Audigy2 ZS in my other system and connected the black cable with the 0 pin connector to the card to use my front phone/mike jacks. Also in your device manager I see the Realtek AC97 still listed. When I installed the XM card in my 600 I disabled it in the BIOS so the entry does not show up in mine just the SB XF-I is displayed.
    src="http://i.pbase.com/g6/89/377389/2/79327975.pMK94KJy.jpg" alt="IMG_008.JPG">
    Dell XPS 600 Intel Pent D 830 3.0ghz
    Chipset- Nvidia nForce4 SLI Intel Edition
    WD 60gb HD
    2gb Ram
    DVD-ROM
    DVD-RW (Plextor 760A)
    Creative XF-I Extreme Music
    Logitech X-540 speakers
    EVGA 7950GT
    Dell 2007WFP (I-SPS panel)
    Win XP SP2
    BIOS A

  • Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

    pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
    how cn i solve this problem..
    pls help..thnx
    my spec:
    AMD Sempron 2400+
    Epox 8rda3i
    Seagate 80gb
    Palit GeForce 6600gt
    Creative Sound Blaster Audigy Value 24-bit

    screwguy_28 wrote:
    is this the one?
    IRQ 0 System timer OK
    IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
    IRQ 3 Communications Port (COM2) OK
    IRQ 4 Communications Port (COM) OK
    IRQ 5 Uni'versal Serial Bus (USB) Controller OK
    IRQ 6 Standard floppy disk controller OK
    IRQ 8 System CMOS/real time clock OK
    IRQ 9 Microsoft ACPI-Compliant System OK
    IRQ 9 SCSI/RAID Host Controller OK
    IRQ 0 MPU-40 Compatible MIDI Device OK
    IRQ NVIDIA nForce PCI System Management OK
    IRQ 2 PS/2 Compatible Mouse OK
    IRQ 3 Numeric data processor OK
    IRQ 4 Primary IDE Channel OK
    IRQ 6 Sound Blaster Audigy OK
    IRQ 8 SoftV92 Data Fax Modem OK
    IRQ 9 NVIDIA GeForce 6600 GT OK
    IRQ 2 Standard OpenHCD USB Host Controller OK
    IRQ 22 Standard OpenHCD USB Host Controller OK
    Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
    Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
    jutapa

  • Creative Sound Blaster Audigy ZS And Vista Driver installation prob

    HI!
    I encounter Installation problems with that file:
    Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
    I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
    Thanks!
    Julien

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • Sound Blaster Audigy with 5.1 Speakers prob

    I have 5. speakers with a sound blaster audigy sound card. I've installed all the drivers and additional programs but it looks like my 2 rear speakers are not working. I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't. In the surround mixer i tested the 5. and here are the results:
    - Front Left (Sound: OK, Speaker: OK)
    - Center (Sound: NO SOUND)
    - Front Right (Sound: OK, Speaker: OK)
    - Rear Left (Sound: OK, Speaker: NO - The sound comes from the center speaker)
    - Rear Right (Sound NO - It sounds very strange... bearly you can understand the words, Speaker: NO - The sound comes from the center speaker)
    The wired are set correctly i checked it and I dont know what it might be wrong. Drivers are ok and everything are installed. Help please.

    "I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't."
    Does this not indicate two of the speakers are not physically working? Or have a mis-interpreted?

  • Can not detect Sound Blaster Audigy 2 on this sys

    Im having trouble install drivers (apart from the old CD ones and some out of date ones) all the latest drivers or beta drivers say they cannot detect my card. I have an Sound Blaster Audigy 2 OEM which i bought nearly 2 years ago. I've tried swapping it to a different pci slot but makes no different Constant crashes when playing openal games. Even if i install the lates openal file. But i need to find out why i can't install the newest drivers and why they say i haven't got an audigy 2 when i have. In my device manger even says that its an "Creative SB Audigy 2 (WDM)" My system is as follows...
    Windows XP Proffesional SP2 32Bit
    P4 3.0ghz
    .25Gb DDR 400 Ram
    Geforce 6800 Ultra 256Mb
    Asustek P4P800-E Deluxe Motherboard
    Creative Sound Blaster Audigy 2 OEM
    PCTV Rave TV card
    Please some one help me, it will be greatly appreciated. If you need anymore info please let me know ( i may uninstall and remove the tv card just to get it off my list of perhaps the audio part of the tv card could be interfering ?)Message Edited by Alexia on -2-2005 :52 PM

    I am getting the exact same problem. Just downloaded the "Creative Sound Blaster Audigy unified series Beta driver with OpenAL support 2.08.0002" for my soundcard which is an Audigy 2 OEM (Model No. SB0240).
    I am using WIndows Media Center Edition 2005, but when I try to install the beta drivers, I get the following error message:
    "Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this setup program
    Setup will exit."
    My Device Manager shows Creative SB Audigy 2 (WDM) with driver version as follows:
    Driver Provider: Creative
    Driver Date: 23/06/2004
    Driver Version: 5.2..444
    I am currently hearing sound fine (so the soundcard is installed correctly), but the sound keeps cutting out from games that use OpenAL.
    Anyone else getting this problem? How did you fix it's

  • Need help fast just bought sound blaster audigy se c

    Hi please anyone help me i just install my new sound blaster audigy se i also disable my onboard sound the problem is i dont get proper 5. surround sound from my speakers it just seem that all the speakers play but dont get the crossover ,I have a cheap 5. system which i bought together with my sound card the bran is duraband model ht-397 80 watts i bouth these two products from wal-mart and i set it up in my bedroom.Also when I go to the speaker checks to hear if each speaker is working it seem i would hear the two rear speaker test sound would come from the two front speakers? i dont like this because before i hand two simple speakers and would hear the change over.. pease anyone? if you can help please reply asp...

    Hi,
    May I know what OS are you running? Please make sure that all background applications are temporarily disabled when installing the sound card.

Maybe you are looking for