Sound Blaster Audigy Problem

Ok I am finally stumped.
Specs
KT800Neo
Athlon 64 3200+
512MB 400Mhz DDR
2 x 120GB Segate HD
AIW 9800 Pro
Win XP Pro Sp 1
Sound Blaster Audigy Platinum
MSI 52x32x52 CD-RW
TDK DVD Recorder
I have tried a million ways to get this stupid soundcard to work, and to no avail.
I downloaded the newest drivers from soundblaster.com and it says it can't even detect the audigy however it shows up in my unknown device detecter. I tried other Audigy drivers that have been unified for 5.1 plat & audigy plat. Same results. I then went to my old install CD that came with the sound card and it works. However my live drive is not being enabled for some reason. I have tried hooking up a 5.1 Live Drive and nothing as well.
I don't have any sound drivers for anything onboard releated installed.
I tried the Kx Drivers for giggles and they installed and even got closer with my Inspire 6.1's working a bit better, however live drive still not working correctly.
My 1394 Net Adapter 1 & 2 are not loaded (drivers) ! mark by the both of them, they tell me to run the trouble shooter 2 says the device drive couldn't load due to old install being in the system, however I have removed these devices before and tried to do something.
ATM I really need to get this sound card functional so any suggestions are appreciated.
Thanks

First time in my life a motherboard worries me before I start playing with it. I have been waiting for my K8T Neo to arrive for two weeks and had time to read numerous reviews and forum.
I validated almost every piece of hardware I’m using, including the sound card (Sound Blaster Audigy Platinum) against the list of hardware tested in MSI’s test report. My sound card was supposed to be supported but we all know the story…
Anyway, I was pleased when I booted for the first time my PC (after disabling the onboard sound) to succeed where many of us failed. I even managed to install Windows XP SP1 without any trouble. I also installed all the latest versions of the drivers, except for my Audigy, for which I installed the driver that came on the accompanying CD. I had no trouble with the stereo sound.
Trouble came when I tested the surround sound. I experienced the same thing as goretexpretzels: no sound from the rear channels… I then updated with the latest version of the drivers/mixer but same crap.
I will perform some tests and try with a non-SP1 version of XP to see if it resolves the problem, but I sincerely hope that MSI will come out with a BIOS patch or a workaround before long.
I’m already starting to regret for not having stayed with Abit after all those years of reliable computing…

Similar Messages

Sound Blaster Audigy Problems

Yes I just had to replace my mother board With KT3 Ultra2 and with my soundblaster card the motherboard won't boot the d- bracket has 2 red lights on the top when looking at the manual this refers to the Ide conroller. Is there and issue with this card. Oh buy ther way I have disabled the onboard sound in the Bios
Thanks

Very odd problem--sounds like a resource conflict, though--definitely. You might have better luck moving the Audigy to another slot--just to see if this changes the resource picture somewhat.
Im assuming here that you have uninstalled all of the drivers for the Audigy, but that simply the presence of the card in the slot at boot causes a lockup. If you find that uninstalling the drivers actually solves the problem while physically leaving the card in the slot and powered up--then I'd say you were having a software conflict somewhere, and might need to uninstall and then reinstall some drivers in a specific sequence.
But I'd try taking out all of the PCI cards you can, including the Audigy, and then I'd put the Audigy in first by itself in its normal slot and see if the same problem manifests with no other cards in the system. If it does then I'd start moving the Audigy one slot at a time until you find a slot for it which won't prevent the system from booting with it installed. Once that's done, add in your cards one at a time and make sure you can boot with each of them so that if you have a problem again you can identify the card in your system the Audigy is conflicting with--if it's a PCI card.
Also, I take it you know not to put *anything* in the PCI slot directly adjacent to your AGP slot (but just wanted to remind you.) Good luck!
Check my sigs here--no problems at all with either the Audigy 1 or 2, so it shouldn't be a problem for you.

Vista drivers problems Sound Blaster Audigy 2 ZS Noteb

First thing to do: haveyour systemchecked out, if windows says the hardware is failing there may really be something wrong with it.
If the SB card works in an XP machine there may be a problem in the the PCI slot or controller on the motherboard, either way have a tech shop look at it. If thehardware allchecks out: before putting the card back in completely delete the old driver and software, download the new one without installing it, then put the card in and windows should try to auto-install with the new driver.P.S. the platinum version is the one with thecontrol panel that slots into a dri've bay, if you have one of those, it's a platinum, if not, it's a regulHi all, how are you
I have a Sony VAIO VGN-SZ430N/B notebook, and I'm trying to install Sound Blaster Audigy 2 ZS Notebook on it (Unfortunately, the notebook came with windows vista business from factory).
This notebook has a Texas Instruments PCMCIA controller.
Under "Device Manager" the PCMCIA controller is described as "Texas
Instruments PCI-8x2/7x2/6x2 CardBus Controller", but on Sony's
webpage the driver that seems to be related to it is "Texas
Instruments PCI74 Integrated FlashMedia Controller Driver".
It is kind of all in one solution from Texas Instruments (PCMCIA
controller, Memory Card reader, and Firewire controller).
Please, may someone help me to answer the questions bellow
1)Are there any kind of compatibility problem between this notebook PCMCIA controller (described above), and Sound Blaster Audigy 2 ZS Notebook
2)I've already brought this notebook to Sony's support service, so they could verify if there is any kind of hardware problem with the notebook. Sony's technician wasn't able to find any hardware problems on it, but I'm experiencing the problem described below:
2.)Every time that I plug this sound card on my notebook, and I try to install Creative's latest windows Vista drivers(Creative Sound Blaster Audigy series Vista Driver 2.2.0002), thus It leads me to a Blue Screen during the driver installation process. Please, Does somebody know what could be this problem root causeIt is very weird, even if i try to install this sound card on clean windows vista install, then it leads me to blue screen. Besides, I have another PCMCIA card from another manufacturer, and I was able to install its windows vista drivers with no problem.(It sounds that Creative labs' vista drivers is the problem root cause as I've tested this sound card on a different notebook with windows xp and It worked fine).
3)Does anyone know if creative is planning to release a windows vista driver that allows the users to use all of this sound card featuresSo far the latest driver available doesn't support even DVD-Audio. Have creative labs discontinued this product
I appreciate any help you can give me,
thanks in advance,
Rogerr ZS.

The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.

Sound Blaster Audigy 2 ZS Problem: Static no

For some reason since I've switched from my Sound Blaster Audigy card to my new Sound Blaster Audigy 2 ZS card, I've been getting a 'static' noise in the background of my speakers. I'm not sure why it would be causing this, and I've already updated my drivers off the creative website, so I'm not sure what my next step will have to be, so I decided to post here and see if anyone knew maybe?

I'm having a similar problem as well i've had my card for a year now and its just this high pitched sound. it doesn't happen right away but it happens after a period of time of using sound of any type music, games....it getting iritating and gives me a headache i think we have a simlar problem i've looked into the drivers and i'm not all to sure what i need none seem to mach my needs? does anyone have any idea's please help!

Sound blaster Audigy 2 zs gamer problem!

(Sound blaster Audigy 2 zs gamer problem!? I had a recent problem recently that caused Windows not to load at all. After getting that fixed and the computer back home I have run into a sound issue. None of the Creative's Media Source programs would work properlly. When clicked on I would get the error that the program has encountered an error and needs to close. Finally un-installed all creative programs and related software and went through the re-install process. Encountered an error that program could not load because plxcore.plx cannot be found. I went through the solution listed on?Creative's web site to fix the?issue and none of fixes worked. Recently deleted everything Creative again by uninstalling all drivers and going through the installshield folder and deletd all creative related items. Went through the install process again. Had the plx error, fixed it and had sound but had the same problems with the Media SOurce as before. Went to Creative's web site through auto updater for a new driver and other essential items needed for my sound. Back to no sound again. Under Windows control panel under sounds and audio devices under volume tab, it will not even let me select the speaker setting or place the volume control on the task bar. @99.3.9.75

Brettpopp
Try updating your BIOS to the latest and have the sound card tested on another machine to see if it is still functioning.
Jason

Creative Sound Blaster Audigy SE problems

Alright first of all I am new to Linux in general.
I have two soundcards in my computer. One is an onboard card (Intel) that is faulty and doesn't work; another is a Creative Sound Blaster Audigy SE which does work.
My problem, of course, is getting the latter to work.
So I realize this is nothing new, searching the forums and reading ALSA's wiki. However there seems to be some issues with making this work on ALSA, so is there a way to configure this with OSS?
"lspci | grep audio" returns both soundcards:
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:00.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster
"ossdetect -v" returns:
Detected Sound Blaster Audigy LS / Live7.1
Detected Intel AC97 (ICH5)
USB support available in the system, adding USB driver
Detected Generic USB audio/MIDI device (BETA)
I use "soundoff" and "soundon", then "osstest":
Sound subsystem and version: OSS 4.1 (b 1052/200903241101) (0x00040100)
Platform: Linux/i686 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
*** Scanning sound adapter #-1 ***
/dev/oss/oss_audigyls0/pcm0 (audio engine 0): AudigyLS front
- Performing audio playback test...
<left> Device returned error: Input/output error
/dev/oss/oss_audigyls0/pcm1 (audio engine 2): AudigyLS center/lfe
- Performing audio playback test...
<left> Device returned error: Input/output error
/dev/oss/oss_audigyls0/pcm2 (audio engine 3): AudigyLS surround
- Performing audio playback test...
<left> Device returned error: Input/output error
/dev/oss/oss_audigyls0/pcm3 (audio engine 4): AudigyLS 5.1 output
- Skipping multi channel device
*** Scanning sound adapter #1 ***
/dev/oss/oss_ich0/pcm0 (audio engine 9): Intel ICH5 (24D5)
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47982.00 Hz (-0.04%)>
*** Some errors were detected during the tests ***
Basically it seems like it detects the crappy onboard sound (which is unusable, I stress) and not my soundcard. I really don't know how to fix/configure this and sound is really important to me if I'll be using Arch.
Thanks for any help offered, if more information about something is needed I'll be more than happy to oblige.

I would start by disabling the on board sound in your BIOS if you are not going to use it. As a novice user much of the documentation kind of covers the simpler case and this might help you navigate them better.
Keep in mind the Audigy SE is not a real Audigy (like Audigy 2 which has very good linux support). If you are just looking for straightforward playback you should have no trouble, but you will not get hardware mixing with SE IIRC.

Sound Blaster Audigy + Logitech G51 problem

Before I replaced the motherboard, graphics card, and processor, I had the SB Audigy [8000] version of the software for my Creative Sound Blaster Audigy sound card. All of the new versions I have downloaded, including the old one, are now [BF00]. Also for some reason, the drivers on the CD install [BF00] as well. Previously it didn't. I have the Logitech G5 surround sound speakers, and when I try to use the Matrix mode in-game, only some speakers will work. When I turn off the matrix, it becomes more surround sound, but I still do not hear some things - It shouldn't be doing this when the matrix is not turned on. When the matrix is not turned on, you would only be able to hear from the front left and right speakers only. When not playing a game, the Matrix seems to work fine, however when I don't have it turned on, I still get surround sound. Again, that shouldn't be happening.
The Matrix mode in game seems to not play all of the sounds in-game, and while not in-game, I still get surround sound without the matrix mode on. This shouldn't be happening; I should only be getting the sound from the front left and right speakers when the matrix is not turned on.
Outside of games, when I turn the bass and treble via the sound controls by the time display all the to the max (Not the acutal volume control for the speakers) it sounds garbled. Before this, that wouldn't happen.
Its all worth mentioning that for some reason, my computer does not have the " Audio Device on Definition Audio Bus " driver installed. My computer cannot find the drivers for it though.
With the [8000], when you didn't have the matrix turned on, you would only be able to hear the two speakers in the front. I cannot find the [8000] version online. Does anyone have any idea what the cause of this is?
Any comments are welcome, thank you
Computer specs:
Sound: Creative Sound Blaster Audigy
Speakers: Logitech G5 Surround Sound
Monitor: LG E2350V
Graphics: Asus GTX 460 GB
Motherboard: Gigabyte 870A-UD3
Processor: AMD Phenom II X4 965
OS: Windows XP SP 3

I'm having a similar problem as well i've had my card for a year now and its just this high pitched sound. it doesn't happen right away but it happens after a period of time of using sound of any type music, games....it getting iritating and gives me a headache i think we have a simlar problem i've looked into the drivers and i'm not all to sure what i need none seem to mach my needs? does anyone have any idea's please help!

Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bit

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Sound Blaster Audigy with 5.1 Speakers prob

I have 5. speakers with a sound blaster audigy sound card. I've installed all the drivers and additional programs but it looks like my 2 rear speakers are not working. I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't. In the surround mixer i tested the 5. and here are the results:
- Front Left (Sound: OK, Speaker: OK)
- Center (Sound: NO SOUND)
- Front Right (Sound: OK, Speaker: OK)
- Rear Left (Sound: OK, Speaker: NO - The sound comes from the center speaker)
- Rear Right (Sound NO - It sounds very strange... bearly you can understand the words, Speaker: NO - The sound comes from the center speaker)
The wired are set correctly i checked it and I dont know what it might be wrong. Drivers are ok and everything are installed. Help please.

"I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't."
Does this not indicate two of the speakers are not physically working? Or have a mis-interpreted?

Can not detect Sound Blaster Audigy 2 on this sys

Im having trouble install drivers (apart from the old CD ones and some out of date ones) all the latest drivers or beta drivers say they cannot detect my card. I have an Sound Blaster Audigy 2 OEM which i bought nearly 2 years ago. I've tried swapping it to a different pci slot but makes no different Constant crashes when playing openal games. Even if i install the lates openal file. But i need to find out why i can't install the newest drivers and why they say i haven't got an audigy 2 when i have. In my device manger even says that its an "Creative SB Audigy 2 (WDM)" My system is as follows...
Windows XP Proffesional SP2 32Bit
P4 3.0ghz
.25Gb DDR 400 Ram
Geforce 6800 Ultra 256Mb
Asustek P4P800-E Deluxe Motherboard
Creative Sound Blaster Audigy 2 OEM
PCTV Rave TV card
Please some one help me, it will be greatly appreciated. If you need anymore info please let me know ( i may uninstall and remove the tv card just to get it off my list of perhaps the audio part of the tv card could be interfering ?)Message Edited by Alexia on -2-2005 :52 PM

I am getting the exact same problem. Just downloaded the "Creative Sound Blaster Audigy unified series Beta driver with OpenAL support 2.08.0002" for my soundcard which is an Audigy 2 OEM (Model No. SB0240).
I am using WIndows Media Center Edition 2005, but when I try to install the beta drivers, I get the following error message:
"Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this setup program
Setup will exit."
My Device Manager shows Creative SB Audigy 2 (WDM) with driver version as follows:
Driver Provider: Creative
Driver Date: 23/06/2004
Driver Version: 5.2..444
I am currently hearing sound fine (so the soundcard is installed correctly), but the sound keeps cutting out from games that use OpenAL.
Anyone else getting this problem? How did you fix it's

Need help fast just bought sound blaster audigy se c

Hi please anyone help me i just install my new sound blaster audigy se i also disable my onboard sound the problem is i dont get proper 5. surround sound from my speakers it just seem that all the speakers play but dont get the crossover ,I have a cheap 5. system which i bought together with my sound card the bran is duraband model ht-397 80 watts i bouth these two products from wal-mart and i set it up in my bedroom.Also when I go to the speaker checks to hear if each speaker is working it seem i would hear the two rear speaker test sound would come from the two front speakers? i dont like this because before i hand two simple speakers and would hear the change over.. pease anyone? if you can help please reply asp...

Hi,
May I know what OS are you running? Please make sure that all background applications are temporarily disabled when installing the sound card.

Bug in Sound Blaster Audigy 2

Hi,
I'm experiencing something that is annoying. I noticed it long ago and it continues happening even with all the updates installed:
Windows XP SP2
DirectX 9.0c
Drivers:
Control Panel, Creative SB Audigy 2 NX, shows 2004/04/9 for the windows driver.
Firmware: ..0509
I installed the latest drivers found HERE (http://es.europe.creative.com/support/downloads/download.asp)
called "Creative USB Sound Blaster Audigy 2 NX update .00.000" (4 Feb 2005)
EAX Console version: 2.07.0
What is the problem?
Well... I have 5. soundsystem, and I choose "Surround Stereo" in the CMSS 3D option.
Each time I shut down the sound card PRESSING THE BUTTON or either turn of the system, I have to re-click this option button.
This is, the system saves the settings correctly, and if I open the EAX Advanced HD again, I find it selected, but when I re-click it again, then the sound gets surround.
Hope it gets fixed, as its a very annyoing thing.
Thanks in advance,
PS: If this is not the place to put this, please tell me insted of simply ignoring it.

There IS a problem with this. I have experienced it in two different configurations, and yes, I have everything updated. As you can see I STILL have the problem... (I don't remember when I posted the first post). I also contacted Creative Support, and although it being fast, they did not test it. I simply got answers once and again about unsinstalling the drivers and some other things on my computer and install again.
I don't know how to report this to a developer or someone who can take some minutes to test it and say "hey yes... it's true!".
The problem with this is that you DON'T notice it at all.. you hear 5., all seems OK, untill you re-click again the "surround stereo" option.. it's in that moment when you notice that the volume and the quality increases... I guess people is using their 5. like in surround but not at 00% quality.
Sad, but it's the way it is I guess...
Now this is my day by day... Plug the NX, open EAX, select surround... and if I previously used my headphones (on the speakers) I have ALSO to switch from 2 speakers to 5. and then EAX and surround (although it's always clicked...)
I'm not asking for help, or suggestions. I just want someone who cares at Creative to know about this... Well of course, if someone has a suggestion or can help in a way that can make me forget about opening EAX console... it's welcome.
Thanks again for reading or for any help.
Regards.
PS: I'm thinking on replying to creative again, but I guess I will get the same answer...

Sound blaster audigy plat. EX

i recently bought a sound blaster audigy platinum EX(not the audigy 2 plat. EX)i was just wondering if the sound from this sound card is better then the on board sound of the k8n ne plat. i have a feeling that it is, i just want to make sure. also, has anyone had any problems installing this type of card and if so how did you go about fixing them? thanks

siruis,
go to the mixer settings and one of the sliders. the one
beside the wave slider to the right and slide it down to about 40% and try it, while playing if static still present
slide it down more while the track is playing, i had the same prob wwith li've 24bit 7. and this cured it for me.
hope this helps you.
john ( good luck )

Sound Blaster Audigy, DR release 2.8.4 failed just like that

Hi, I have a big problem, last Saturday someone has used my computer he did nothing all too strange he only downloaded some files and had an audioconversation on his MSN-account. But to my astonishment the sound disappeared. I have tried everything in my ability on my knowledge of computers and this site. I have checked every configuration and all. I have re-installed and updated everything but nothing works, does anybody have an idea what I can do?
Sound Blaster Audigy, DR release 2.8.4Date: Agust 8th 2005
Program version: 5.2.8.64
Application instance id: PCI\VEN_02&DEV_0004&SUBSYS_005A02&REV_03\3&6AAA0&0 &60
Windows XP Professional 2002 version service pack 2
Need more info? let me know!

go online to http://support.creative.com/Products...Audigy+2+Value?go to the bottom of page and click auto update and up date all your drivers.
Or go to your start menu click on settings, click open control panel, your system file click it open, click open Device manager, in device manager scrool down till you find sound,video game controllers double click that open, go down till you find the name of your sound card right click on that, click on properties a window will open up with a bunch of tabs at the top find the driver tab click it open find where it says update driver click that and let it do its thing? after done restart your computer good luck!

Sound Blaster Audigy Problem

Similar Messages

Maybe you are looking for