SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

(ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
CONTINUE ON-
Download RAR file with ISO inside and install if you don't have the installation CD
installation cd with EQ download: http://files.filefront.com//;689430;;/
If you do or after you finish downloading goto step A.
A) Take your Creative Driver/Install CD, copy it to your hard dri've.
B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
C) Set it for Windows XP SP2.
D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
E) Restart when told to
F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
Message Edited by jeepbme on 03-08-200708:50 PM

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Similar Messages

  • Creative Sound Blaster Audigy ZS And Vista Driver installation prob

    HI!
    I encounter Installation problems with that file:
    Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
    I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
    Thanks!
    Julien

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • Help! Sound Blaster Audigy - bass and tre

    Hello! I had a Sound Blaster Audigy. There are any problems in the control with the Creative Surround Mixer. It cannot to set the bass and treble. Why and what is problem with it's Thank you!?Problem with the Sound Blaster Audigy - bass and treblehttp://icq299885550.mysinamail.com/Photo/Creative.jpghttp://icq299885550.mysinamail.com/Photo/Creative2.jpg?Message Edited by mrchan2002 on -7-20062:27 AM

    What's the model number of your soundcard? Certain series of Sound Blaster doesn't support adjusting bass and treble so you have to use the Graphic Equalizer software instead to adjust it.
    Jason

  • "Sound Blaster Audigy Fx" and stereo mix availability

    If I buy/install the "Sound Blaster Audigy Fx" will it add the stereo mix option to my sound properties, also
    does this card work on windows 8?
    http://www.bestbuy.com/site/creative...&skuId=3287009

    Re: Sound Blaster Xtreme Audio missing Stereo MixK I think I'm having a similar problem with my Windows 7 Professional system.
    I'm am getting sound out of my card.
    When I right click on the "speaker" icon in the task bar I see the following list of 5 options
    Volume Mixer
    Playback Devices
    Recording Devices
    Sounds
    Volume Control Options
    However when I click on "playback devices", "Recording Devices" and "sounds" nothing comes up.
    What I did do is completely uninstall all traces of any installed Creative software and in the device manager did an uninstall for the SB Xtreme Audio Card.
    My recording device is the integrated microphone in the Logitech Quickcam/IM that I have installed. If I go to accessories and click on "sound recorder" it doesn't start up either.
    The other issue that I see is that when I go into Control Panel and click on Sounds, nothing happens.
    Something is definitely going on but I can't seem to track down the cause.

  • Sound blaster audigy 2 zs not working with vi

    ok so my sound blaster worked fine with xp and i upgraded to vista and it isnt working at all. i tried to install the driver from creative's site that is supposed to work with vista. when i run the install it says it is missing a bunch of files like layout.bin and setup.exe, setup.ini,and a bunch of crap like that...i even tried getting these files from somewhere else and putting them in the install folder, it ran without missing files but gave me the same error at the end, I-00. THEN i even tried using the cd it came with when i bought the card on xp, it worked with a few minor errors but at the end it recognized my card but i get absolutely no sound at all...

    The problem you are getting has to do with InstallShield and most probably your?Vista configuration... Make sure you are running as administrator and check the log files in the Program Files/InstallShield... folder to see exactly what files you are missing. There is a Creative Knowledgebase article about it, so do read it. Also do remove any Creative XP software, especially make sure you removed the InstallShield Creative folders (in the same location as above), as these have been known to cause Installation failures.

  • Sound Blaster Audigy SE on Vista (Proble

    Alright, I recieved my Audigy SE, installed it into an empty PCI Slot, booted up my PC, Put in the DriverCD, Installed, and it worked fine. Then the AutoUpdate popped up, and It said I needed to update to a Vista Driver, and MediaSource 5 Update. I do so, then in the middle of the installation it tells me "Please Insert the CD that has the login.bin file" Im not sure if it says login.bin file or what it says but it says insert a CD. I try inserting my normal Driver CD that came with the SE, and it doesn't work so I have to quit. On the Box it says "Works With Windows Vista", and apparently that's not the case because many people are having problems with this. This is what makes me so mad. But can anyone help me with this problem?

    (Hi,
    It would be advisable to uninstall everything and reinstall using the latest driver from the website. Please check if you have this driver. You might want to consider getting a newer sound card instead because the Audigy SE is a very old product and software support for Windows 7 is pretty much limited.

  • Creative Sound Blaster Audigy LS and soundfo

    Hi! i got an Audigy LS, is it possible to use soundfonts with Cubase For example?
    i didn't notice any instrument lik synt A or B like Sbli've did.
    T. I.A.
    Massimo

    I'm not completely sure of the answer, but the Audigy LS specs have both wavetable synthesis and soundfont support listed. That indicates to me that it should be possible.
    -Dave
    [email protected]

  • Will the Sound Blaster Audigy 2 drive bay work with Audigy 2 ZS car

    As above,
    can the Audigy 2 dri've bay be used with the Audugy 2 ZS and if so, can everything on it be used?.
    Are all the connections and functions the same on both dri've bays(Audigy 2, Audigy 2 ZS)?

    Yes, they should work with eachother, but it is not officially supported.
    Cat

  • Sound Blaster Fatal1ty Chapionship and Z-5500 With Dolby And DTS Pack.

    . I cant get the encoder to work on the program all I get is format is not supported. Im using a optical cable and Its driving me insane. Any help would be great. As you can tell what I have going on here on the screen shot but hell... I cant get dolby or DTS to work keeps giving me that message. <img border="0" width="799" src="http://i9.photobucket.com/albums/a90/bravounit9/Untitled-.jpg" height="653" align="bottom">@75.8.77.249

    J. Ok so I got it all working..... But if it can only be played at 48khz I thaugh 92khz is better. Cause I notice when I went from prologic 2 to just optical Digital I dont see that number on my uppper right pud it doesnt say on there 96khz anymore.... :\ So what is 48khz suppose to be better? By the way thanks for all the help also. You guys been helpful.. Just like to know more. Im new to this whole dolby digital. My first speakers that are Dolby Digital. Never hade Dolby Digital speakers [email protected]

  • Can not detect Sound Blaster Audigy 2 on this sys

    Im having trouble install drivers (apart from the old CD ones and some out of date ones) all the latest drivers or beta drivers say they cannot detect my card. I have an Sound Blaster Audigy 2 OEM which i bought nearly 2 years ago. I've tried swapping it to a different pci slot but makes no different Constant crashes when playing openal games. Even if i install the lates openal file. But i need to find out why i can't install the newest drivers and why they say i haven't got an audigy 2 when i have. In my device manger even says that its an "Creative SB Audigy 2 (WDM)" My system is as follows...
    Windows XP Proffesional SP2 32Bit
    P4 3.0ghz
    .25Gb DDR 400 Ram
    Geforce 6800 Ultra 256Mb
    Asustek P4P800-E Deluxe Motherboard
    Creative Sound Blaster Audigy 2 OEM
    PCTV Rave TV card
    Please some one help me, it will be greatly appreciated. If you need anymore info please let me know ( i may uninstall and remove the tv card just to get it off my list of perhaps the audio part of the tv card could be interfering ?)Message Edited by Alexia on -2-2005 :52 PM

    I am getting the exact same problem. Just downloaded the "Creative Sound Blaster Audigy unified series Beta driver with OpenAL support 2.08.0002" for my soundcard which is an Audigy 2 OEM (Model No. SB0240).
    I am using WIndows Media Center Edition 2005, but when I try to install the beta drivers, I get the following error message:
    "Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this setup program
    Setup will exit."
    My Device Manager shows Creative SB Audigy 2 (WDM) with driver version as follows:
    Driver Provider: Creative
    Driver Date: 23/06/2004
    Driver Version: 5.2..444
    I am currently hearing sound fine (so the soundcard is installed correctly), but the sound keeps cutting out from games that use OpenAL.
    Anyone else getting this problem? How did you fix it's

  • Sound blaster audigy midi p

    I bought a SB Audigy2 value bulk, this card haven't a onboard midi port; is there the possibility to buy and connect a midi port?

    Originally Posted by karloch
    Hi everyone!
    I recently purchased a Sound Blaster Audigy RX and I'm very pleased with the improved audio quality over the Intel HDA included in my motherboard.
    However, I have a problem when playing MID files using hardware midi synthesis: I select the correct midi device "SB Audigy 5/Rx Synth A" and play the midi file using Windows Media Player. I can hear the tune, but with LOT of noise. As this problem is only happening with MIDI, I wonder if it is a driver issue or a faulty card. I have tried with official Creative drivers and with the Daniel_K's SB 5.3 support pack with same result.
    I'm attaching an MP3 file of the MIDI output you can get a clear picture of what's happening.
    ffaboss_short.zip
    Should I replace my card or is it a software problem?
    Hi karloch,
    Pardon me for saying that I did not detect the noise you mentioned in your attached MP3 file. I can't be sure it's the noise or is it part of the music; especially towards the end of the playback. I'm using VLC player btw.
    Perhaps, you may like to test it with another media player.
    Cheers,
    JL-CL

  • Set up from creative down load does not detect any sound blaster audigy mess

    I have a sound blaster audigy with no installation cd. I installed the card to download the drivers. The detection software on the site said there was no creative product installed.
    I downloaded the web update file and saved to my desk top. Ran the file after closinging all apps and got a message that there was no audigy detected. Reinstalled the card, same, did it again in another pci slot.
    Tried finding a driver in xp, found one for soundblaster. No sound at all with this xp driver. I do not have intergrated sound on the abit k7rsa board. How do you install the driver if the set up program stops you because it does not see the device, and with no install cd? Thanks for any help.
    Tony

    I have the same problem. About a year ago I threw out all my driver cd's because they were really piling up and i figured i'd never need them because I've been able to download all the driver's i've ever needed from company websites.
    NOT SO with Creative.
    I have the Sound Blaster Audigy 2 Platinum (the one with the ports for the front of the computer). I recently had to reinstall my OS. I got the soundcard to work, but all the optional components I had before (like the ability to use the remote control to control sound, and the EAX console etc) are gone. I tried to download these components from the website (it's really hard to tell which is which, so i downloaded them all). They will NOT install! I keep getting the error message "Setup did not detect required components, Setup will exit" on all the download software.
    This is extremely frustrating because I'm unable to setup the speakers properly (windows speaker settings don't really work).
    I did manage to do the automatic update thing, but it only updates the core drivers.
    PLEASE HELP!
    I paid $200 bucks for this card (granted, that was a couple years ago), so I should be able to at least download the same software that came with the product!
    Please have a professional (not an engineer without user interface experience) design the download area too...it is extremely difficult to understand what the individual components really do! At the very least, when you download them...they should work!
    Thanks.

  • Sound Blaster Audigy Joystick/midi brac

    I was wondering if anyone knows where someone can get the joystick/midi bracket for the Sound Blast Audigy cards (SB0090)? I am going to be upgrading some components (including mobo which I will then lose my joystick port) and I have a Microsoft Sidewinder Force Feedback joystick that works perfectly that I enjoy using when I play Battlefield 942 and some other games. Thanks?Steve

    Originally Posted by karloch
    Hi everyone!
    I recently purchased a Sound Blaster Audigy RX and I'm very pleased with the improved audio quality over the Intel HDA included in my motherboard.
    However, I have a problem when playing MID files using hardware midi synthesis: I select the correct midi device "SB Audigy 5/Rx Synth A" and play the midi file using Windows Media Player. I can hear the tune, but with LOT of noise. As this problem is only happening with MIDI, I wonder if it is a driver issue or a faulty card. I have tried with official Creative drivers and with the Daniel_K's SB 5.3 support pack with same result.
    I'm attaching an MP3 file of the MIDI output you can get a clear picture of what's happening.
    ffaboss_short.zip
    Should I replace my card or is it a software problem?
    Hi karloch,
    Pardon me for saying that I did not detect the noise you mentioned in your attached MP3 file. I can't be sure it's the noise or is it part of the music; especially towards the end of the playback. I'm using VLC player btw.
    Perhaps, you may like to test it with another media player.
    Cheers,
    JL-CL

  • Sound Blaster Audigy software CD probl

    For a few years now, I have been running the old Sound Blaster audigy card, and have never needed to upgrade as it's such a good card and it does everything it's required. The problem comes in the form of the original software CD distributed with the card. (I've already read the faq and have already found a solution) The software CD is very terrible, in the great many years I have had to reinstall my system for various reasons, the part where I install my audigy card software is by far the most tedious, and completely unpredictable.
    When I say tedious, the installation takes forever, even if you set the most minimum of installation requirements. On top of that, if the program in itself loses focus, it halts the installation, so no playing Freecell in the background to pass the time. Otherwise, the installation generally halts at around the 97% mark and says "updating drivers..." I've left this one night and gone to bed and it's still been at 97% over 0 hours. This one really gets me, there's no error message. So the only way around this is to ctrl-alt-del, and uninstall, and then restart.
    On the other hand, as I recently found out, installing of the playcenter that comes with the CD, often stalls the installation completely. During the install playcenter wants to know which media formats to assosiate. The problem is, it brings that screen up behind all the windows, and the only way you know it's done that is by clicking "show desktop". It's not possible to bring it to the foreground, so basically the installation has to be killed.
    But then I get to the unpredictable part, half the time the installation isn't complete, and if you open up the surround mixer, most of the information is missing, no speaker settings or EAX.
    So for a long time I looked for a remedy to this problem, often downloading the Webupdates didn't seem to always work, they too had their similar problems. And only now have I finally come up with the answer, the new OpenAL beta drivers. Completely different installation program, and works perfectly. To think an installation of the size of around 20mb has fixed such a long problem, thankyou Creative I can now chuck out this completely useless CD and replace it with the quick and very easy OpenAL beta. I thought it was supposed to be the beta products that were more buggy.
    Anyone else noticed these style problems?

    I've been fiddling around in the Device Manager and it has Other Devices and under it is Multimedia Audio Controller, I can choose to either reinstall the driver udate the driver, disable it, or uninstall it. Here's what comes up on properties
    This device is not configured correctly. (Code )
    To reinstall the drivers for this device, click Reinstall Driver.
    Help would be appreciated here. I'm a big gamer and would like to have this up and running before our first CAL Match.

  • Sound Blaster Audigy Platinum BIG Proble

    I have sound blaster audigy platinum and in few weeks I have got this strange problem that I?ve hadn't before. If I use old drivers for it, windows gives me blue screen with "bad pool caller" very often when I play or just listen music. With new drivers it gives me "driver irql not less or equal". At the same time in linux it works fine. In windows I've checked viruses etc. reinstalled windows many times, used memtest and so on. Finally 2 days ago I took my Sound blaster off my computer and ever since I haven't got any problems. So it obviously is the problem. But I just don't know what to do anymore to get it work? Now I use the sound card that comes integrated with my motherboard but it's not as good. Btw I don't use integrated sound card same time with sound blaster. Please Help!

    Hate29,
    You might find something useful here.

Maybe you are looking for

  • Safari 6.1 crashes frequently

    Hi All, I am using safari 6.1 on Macbook pro. Since last week or so safari crahses suddenly after ever 5-10 minutes. Can someone help me please by suggesting a simple way if possibe to fix this issue. This is the error code displayed once it crahsed.

  • Problem with recovery mode.

    I'm not new to this sort of thing and I know how to solve most problems but here is where I have a problem: So I got back from vacation today, and while in Jersey, I was killing myself over the fact that the 2.0 update was out. So I get back and try

  • How to get siri to wait before ending dictation.

    I will create a note or imessage and can only have it take one line. If I say two sentences fast with a period in the middle it will take that but then will send the second sentence often before I finish it. Why is Siri not taking multiple sentences?

  • Mail stuck on "updating color for message 10 of 11"

    - the above message just runs constantly. I have repaired permissions, restarted several times but Mail just sits and updates color. Does anyone know how I can deal with this? How do I find message 10 of 11? Should I delete it? Or are there other way

  • I had CS6 and after some dumb actions on my part it became unlicensed creative cloud. How do I fix it?

    Basically, in an ill-advised attempt to save space on my SSD, I moved all the program data from that drive to a secondary HDD. I couldn't get it the pc to recognize the new Program Data folder, so I moved it back. Somewhere along the way, my license