Sound blaster Audigy SE, No 5.1 sound, and deco

Ok well i've been looking here for awhile now. all i want to hear is the speakersetting test to pick up all my speakers. It picks up the left and right speaker, none of the rest though. everything is set to 5., cmss is on. all i hear when i play music is the same stuff coming out of the speakers but it still doesnt pick up the speakers on the speakersettings test.
Any help?
Thank you,
Rick

Bump

Similar Messages

Sound Blaster Audigy 2 ZS, only front left and front ri

I've had the sound card for about 8 months now. About a week ago, instead the usual 7. coming out of my speakers, only the front left and front right speakers work. It's not the speakers, because I plugged the speakers into the onboard audio and they all work, but when I have them plugged into the sound card, only the front two. I have the audio set to 7. in the control panel and have CMSS 3D turned on. It has nothing to do with settings, because when I run the test in the THX console, the front two speakers are the only ones that work. Could someone please help me out, Thanks

You could try this. Remove the sound card from the computer and boot up the computer without the sound card in the computer. Let Windows finish loading and then have it shutdown. Slot back the sound card to the PCI slot and boot the computer.
Jason

Sound Blaster - Audigy LS (Yes Yes Go Ahead and Lau

Anyway.
I need desperately to find out from somewhere, where can I buy a "SPDIF I/O -plug", as it says in the
manual that will be combined to Optical Digital I/O card (available only on certain models).
Well my card has the socket in the audio card, and please someone tell me where to buy such a
cable I assume which then will be installed into the rear of the chassis as all the other cards etc..
I would appreciate very much if someone could shed some light for me on this matter, and I li've
in Finland so that might complicate things a bit but anyway thanx already.
soundZspy of coN:Fusion (2006)

Download the latest Creative MediaSource v3.30.2 from your product download site.

Other than downloading the latest Creative MediaSource v3.30.2, don't forget to also download the following latest plugins for Creative MediaSource:
- Creative MediaSource Plugin for MiniDisc .00.58
- Creative MediaSource Plugin for CD Burner 3.0.8

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

(ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
CONTINUE ON-
Download RAR file with ISO inside and install if you don't have the installation CD
installation cd with EQ download: http://files.filefront.com//;689430;;/
If you do or after you finish downloading goto step A.
A) Take your Creative Driver/Install CD, copy it to your hard dri've.
B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
C) Set it for Windows XP SP2.
D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
E) Restart when told to
F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
Message Edited by jeepbme on 03-08-200708:50 PM

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Sound Blaster Audigy 2 ZS Platinum Pro Prob

Recently I've purchased the Creative Power Pack Pro 7., it included the Creative GigaWorks 7. S750
speakers, and Sound Blaster Audigy 2 ZS Platinum Pro soundcard. I've installed my Sound Blaster Audigy 2 ZS Platinum Pro card and setup my Sound Blaster GigaWorks S750 speakers but so far after many attempts haven't gotten them to work. I've tried all updates off the Creative site and gone through the cards settings. For some reason in the speaker settings it only lists Headphones, 2., 4. and 5. speaker settings, leaving out 7.. I've checked all plugins and hookups, and am stuck for now. I have a brand new Sony Vaio computer, so i know that my computer is not the problem. I read through all the forms and I was only able to find one other question like mine, one person answered saying that the Sound Blaster Audigy 2 ZS Platinum Pro is not compatible with 7. speakers. I have no clue why Creative would sell the Audigy 2 ZS Platinum Pro and GigaWorks S750 7. speakers if they are not compatible with each other. Someone please help me. Thanks.

Hi Joko,
Please check your private message.

Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bit

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

Vista drivers problems Sound Blaster Audigy 2 ZS Noteb

First thing to do: haveyour systemchecked out, if windows says the hardware is failing there may really be something wrong with it.
If the SB card works in an XP machine there may be a problem in the the PCI slot or controller on the motherboard, either way have a tech shop look at it. If thehardware allchecks out: before putting the card back in completely delete the old driver and software, download the new one without installing it, then put the card in and windows should try to auto-install with the new driver.P.S. the platinum version is the one with thecontrol panel that slots into a dri've bay, if you have one of those, it's a platinum, if not, it's a regulHi all, how are you
I have a Sony VAIO VGN-SZ430N/B notebook, and I'm trying to install Sound Blaster Audigy 2 ZS Notebook on it (Unfortunately, the notebook came with windows vista business from factory).
This notebook has a Texas Instruments PCMCIA controller.
Under "Device Manager" the PCMCIA controller is described as "Texas
Instruments PCI-8x2/7x2/6x2 CardBus Controller", but on Sony's
webpage the driver that seems to be related to it is "Texas
Instruments PCI74 Integrated FlashMedia Controller Driver".
It is kind of all in one solution from Texas Instruments (PCMCIA
controller, Memory Card reader, and Firewire controller).
Please, may someone help me to answer the questions bellow
1)Are there any kind of compatibility problem between this notebook PCMCIA controller (described above), and Sound Blaster Audigy 2 ZS Notebook
2)I've already brought this notebook to Sony's support service, so they could verify if there is any kind of hardware problem with the notebook. Sony's technician wasn't able to find any hardware problems on it, but I'm experiencing the problem described below:
2.)Every time that I plug this sound card on my notebook, and I try to install Creative's latest windows Vista drivers(Creative Sound Blaster Audigy series Vista Driver 2.2.0002), thus It leads me to a Blue Screen during the driver installation process. Please, Does somebody know what could be this problem root causeIt is very weird, even if i try to install this sound card on clean windows vista install, then it leads me to blue screen. Besides, I have another PCMCIA card from another manufacturer, and I was able to install its windows vista drivers with no problem.(It sounds that Creative labs' vista drivers is the problem root cause as I've tested this sound card on a different notebook with windows xp and It worked fine).
3)Does anyone know if creative is planning to release a windows vista driver that allows the users to use all of this sound card featuresSo far the latest driver available doesn't support even DVD-Audio. Have creative labs discontinued this product
I appreciate any help you can give me,
thanks in advance,
Rogerr ZS.

The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.

Sound blaster audigy 2 zs platinum sound probl

Ok So let me give you the specs on my computer first,?Windows xp home editionAbit IN9 32 MAX Mobo2 Gigs corsair xms ram2 8800ultra sli gpusLogitech?z-5300 SpeakersSound blaster audigy 2 zs platinum sound card2 Samsung 500 gig HD?I dont believe that my problem is the same as is in the crackling sound thread. So here is my dilema. Up untill about 4 days ago everything was working fine with my sound system. I have the Logitech speakershooked up to my audigy 2 zs along with my xbox 360 in the optical in on the front plate. So like i said about 4 days ago i started playing a movie on my computer and i have the ac3 codec installed on my computer with comunity codec pack and i know that you could say that those 2 things could be my problem i know enough to know that that probably isnt. So when i played the movie and when to the ac3 codec and turned on dolby decoding so that i would decode it to all my speakers everything worked fine. Then when i turned on spdif decoding my center speaker?started to crackle so i figured it was just becuase i was useing spdif and dolby decoding at the same time. so i turned that off and then went to go play my xbox 360 in which i have pluged into the optical in part on the front plate. Everything had always worked fine for that i have dolby digital decodeing on for the audigy. So i started to play a game i realized that i center speaker was crackling on there too. So i started to realize that no matter what i did the center speaker was crackling. I even changed out the center and sub stereo jack on the card for the front left and right and then they started to crackle in that spot. So i dont know what the hell is going on. Any help would be greatly appreciated i was thinking of restoring my computer but i dont know whether that is necessary. I also dont want to have to go out and by the x-fi elite pro tomarrow unless I absolutely have to.Message Edited by TasteOfChaos on 0-0-20080:02 PM

I am brand new to this message system but I am so desperate for help I thought I would try it. After reading lots of comments I find that my problem may be more the rule than the exception. I have an Audigy @ Platinum card and all I ever get from it is crackling and popping. I have been around and around with Creative support but nothing they tell me results in a fix. I am so disgusted at this point that I am ready to just trash the whole thing. I have gone through the BIOS and checked so many settings its a shame. Still crackling and popping. I NEED SPECIFIC ANSWERS FROM SOMEBODY...not just the generic flip the wingle wangle to port xyz and move this to that. here has got to be an answer to this maddening problem. The other thing is that now I can't get my MIDI keyboard to play back. I must have turned something off in the set up process but now I have no idea what to do.
If anyone has any solid answers for me PLEASE come forward with them before I kill someone!

Sound Blaster Audigy 2 ZS Platinum Pro Ad_link Cable

Hi,? I have the Sound Blaster Audigy 2 ZS Platinum Pro and my Ad_Link cable has been damaged. I have contacted every on line auction house and everyone in and out of the United States and no one has this cable available. What I am looking for now is one of 2 things;? the specs of this cable (which is not listed in any of the documentation that came with the product, nor is it on the web-site, nor does Customer Support seem to have this information), or a comparable cable that will work in it's place.
Thanks for any help that anyone can offer.
A very frustrated,
Jody

Hi Joko,
Please check your private message.

Sound Blaster Audigy with 5.1 Speakers prob

I have 5. speakers with a sound blaster audigy sound card. I've installed all the drivers and additional programs but it looks like my 2 rear speakers are not working. I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't. In the surround mixer i tested the 5. and here are the results:
- Front Left (Sound: OK, Speaker: OK)
- Center (Sound: NO SOUND)
- Front Right (Sound: OK, Speaker: OK)
- Rear Left (Sound: OK, Speaker: NO - The sound comes from the center speaker)
- Rear Right (Sound NO - It sounds very strange... bearly you can understand the words, Speaker: NO - The sound comes from the center speaker)
The wired are set correctly i checked it and I dont know what it might be wrong. Drivers are ok and everything are installed. Help please.

"I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't."
Does this not indicate two of the speakers are not physically working? Or have a mis-interpreted?

Can not detect Sound Blaster Audigy 2 on this sys

Im having trouble install drivers (apart from the old CD ones and some out of date ones) all the latest drivers or beta drivers say they cannot detect my card. I have an Sound Blaster Audigy 2 OEM which i bought nearly 2 years ago. I've tried swapping it to a different pci slot but makes no different Constant crashes when playing openal games. Even if i install the lates openal file. But i need to find out why i can't install the newest drivers and why they say i haven't got an audigy 2 when i have. In my device manger even says that its an "Creative SB Audigy 2 (WDM)" My system is as follows...
Windows XP Proffesional SP2 32Bit
P4 3.0ghz
.25Gb DDR 400 Ram
Geforce 6800 Ultra 256Mb
Asustek P4P800-E Deluxe Motherboard
Creative Sound Blaster Audigy 2 OEM
PCTV Rave TV card
Please some one help me, it will be greatly appreciated. If you need anymore info please let me know ( i may uninstall and remove the tv card just to get it off my list of perhaps the audio part of the tv card could be interfering ?)Message Edited by Alexia on -2-2005 :52 PM

I am getting the exact same problem. Just downloaded the "Creative Sound Blaster Audigy unified series Beta driver with OpenAL support 2.08.0002" for my soundcard which is an Audigy 2 OEM (Model No. SB0240).
I am using WIndows Media Center Edition 2005, but when I try to install the beta drivers, I get the following error message:
"Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this setup program
Setup will exit."
My Device Manager shows Creative SB Audigy 2 (WDM) with driver version as follows:
Driver Provider: Creative
Driver Date: 23/06/2004
Driver Version: 5.2..444
I am currently hearing sound fine (so the soundcard is installed correctly), but the sound keeps cutting out from games that use OpenAL.
Anyone else getting this problem? How did you fix it's

Need help fast just bought sound blaster audigy se c

Hi please anyone help me i just install my new sound blaster audigy se i also disable my onboard sound the problem is i dont get proper 5. surround sound from my speakers it just seem that all the speakers play but dont get the crossover ,I have a cheap 5. system which i bought together with my sound card the bran is duraband model ht-397 80 watts i bouth these two products from wal-mart and i set it up in my bedroom.Also when I go to the speaker checks to hear if each speaker is working it seem i would hear the two rear speaker test sound would come from the two front speakers? i dont like this because before i hand two simple speakers and would hear the change over.. pease anyone? if you can help please reply asp...

Hi,
May I know what OS are you running? Please make sure that all background applications are temporarily disabled when installing the sound card.

Connecting PCMCIA Sound Blaster Audigy 2 ZS Notebook to Onkyo HT-S580 Recei

Hi
I have PCMCIA Sound Blaster Audigy 2 ZS Notebook audio card with my Thinkpad laptop.
I have bought Onkyo HT- S580 Hometheater system. I was hoping to connect the Line out, Line out2, Line out3 jacks to the receiver's Front, Surround(rear) and Center in jacks.
The color on the Onkyo Recei'ver end are Center - Green , Surround(rear) - Blue , Front - White
The color on the Creative Card end are Center- Orange , rear - Black , Front - Green
There is color difference between these two ends . Is it advisable to connect these two jacks ?
Please recommend the suitable cable type and name for this connection
Thanks

dilip wrote:
Hi I have PCMCIA Sound Blaster Audigy 2 ZS Notebook audio card with my Thinkpad laptop. I have bought Onkyo HT- S580 Hometheater system. I was hoping to connect the Line out, Line out2, Line out3 jacks to the receiver's Front, Surround(rear) and Center in jacks. The color on the Onkyo Recei'ver end are Center - Green , Surround(rear) - Blue , Front - White The color on the Creative Card end are Center- Orange , rear - Black , Front - Green There is color difference between these two ends . Is it advisable to connect these two jacks ? Please recommend the suitable cable type and name for this connection Thanks
Hi
Colours may vary --> just connect by the instructions from both manuals.
There are good explanations for
- Stereo and 4-Pole Jack Diagrams
- Connecting a multichannel home theater receiver
- cabletypes needed on connections
on User's Guide.
NOTE: This User's Guide can be found on your driver CD too.
Also, here is the Onkyo HT-S580 manual.
jutapaMessage Edited by jutapa on 0-0-2006 03:32 AM

Bug in Sound Blaster Audigy 2

Hi,
I'm experiencing something that is annoying. I noticed it long ago and it continues happening even with all the updates installed:
Windows XP SP2
DirectX 9.0c
Drivers:
Control Panel, Creative SB Audigy 2 NX, shows 2004/04/9 for the windows driver.
Firmware: ..0509
I installed the latest drivers found HERE (http://es.europe.creative.com/support/downloads/download.asp)
called "Creative USB Sound Blaster Audigy 2 NX update .00.000" (4 Feb 2005)
EAX Console version: 2.07.0
What is the problem?
Well... I have 5. soundsystem, and I choose "Surround Stereo" in the CMSS 3D option.
Each time I shut down the sound card PRESSING THE BUTTON or either turn of the system, I have to re-click this option button.
This is, the system saves the settings correctly, and if I open the EAX Advanced HD again, I find it selected, but when I re-click it again, then the sound gets surround.
Hope it gets fixed, as its a very annyoing thing.
Thanks in advance,
PS: If this is not the place to put this, please tell me insted of simply ignoring it.

There IS a problem with this. I have experienced it in two different configurations, and yes, I have everything updated. As you can see I STILL have the problem... (I don't remember when I posted the first post). I also contacted Creative Support, and although it being fast, they did not test it. I simply got answers once and again about unsinstalling the drivers and some other things on my computer and install again.
I don't know how to report this to a developer or someone who can take some minutes to test it and say "hey yes... it's true!".
The problem with this is that you DON'T notice it at all.. you hear 5., all seems OK, untill you re-click again the "surround stereo" option.. it's in that moment when you notice that the volume and the quality increases... I guess people is using their 5. like in surround but not at 00% quality.
Sad, but it's the way it is I guess...
Now this is my day by day... Plug the NX, open EAX, select surround... and if I previously used my headphones (on the speakers) I have ALSO to switch from 2 speakers to 5. and then EAX and surround (although it's always clicked...)
I'm not asking for help, or suggestions. I just want someone who cares at Creative to know about this... Well of course, if someone has a suggestion or can help in a way that can make me forget about opening EAX console... it's welcome.
Thanks again for reading or for any help.
Regards.
PS: I'm thinking on replying to creative again, but I guess I will get the same answer...

Sound blaster Audigy SE, No 5.1 sound, and deco

Similar Messages

Maybe you are looking for