Sound Blaster Auduigy SE and Triton Xtreme 51 Headpho

All the speakers with in the headphones are working, its a 5. surround sound headset, The subwoofer is not working at all! I would be thinking this has to do with my sound card then the product that i just brought. I have looked threw the sound options and dont see anything. I have look at other fourms post and tryed them and nothing.

I have the same headphones and although I find them great they do not put out the bass as I thought they would. It is not the soundcard because I swithched from a xfi platinum to another brand and same results.

Similar Messages

Sound Blaster Audigy Drivers and Applications CD-Rom

Does anyone know where I can get or download?the "Sound Blaster Audigy" "Drivers and applications" CD-rom?
I have included a pic below:
<img alt="cd-rom" src="http://www.geocities.com/pershingbpa/soundblastercd.jpg" align="left[/img] width="70" height="705">

jay23,
First extract the RAR file you downloaded using WinRar. During the extraction, WinRar will create an ISO file which is an image of the installation CD. If you don't want to burn that ISO file to a CD, then download and install MagicDisc from the link I gave above. MagicDisc lets you mount an ISO file as a virtual hard dri've. You should be able to install from that virtual CD just as if it were a real hard copy CD, but I've never tried that so can't say for certain.

Help! Sound Blaster Audigy - bass and tre

Hello! I had a Sound Blaster Audigy. There are any problems in the control with the Creative Surround Mixer. It cannot to set the bass and treble. Why and what is problem with it's Thank you!?Problem with the Sound Blaster Audigy - bass and treblehttp://icq299885550.mysinamail.com/Photo/Creative.jpghttp://icq299885550.mysinamail.com/Photo/Creative2.jpg?Message Edited by mrchan2002 on -7-20062:27 AM

What's the model number of your soundcard? Certain series of Sound Blaster doesn't support adjusting bass and treble so you have to use the Graphic Equalizer software instead to adjust it.
Jason

"Sound Blaster Audigy Fx" and stereo mix availability

If I buy/install the "Sound Blaster Audigy Fx" will it add the stereo mix option to my sound properties, also
does this card work on windows 8?
http://www.bestbuy.com/site/creative...&skuId=3287009

Re: Sound Blaster Xtreme Audio missing Stereo MixK I think I'm having a similar problem with my Windows 7 Professional system.
I'm am getting sound out of my card.
When I right click on the "speaker" icon in the task bar I see the following list of 5 options
Volume Mixer
Playback Devices
Recording Devices
Sounds
Volume Control Options
However when I click on "playback devices", "Recording Devices" and "sounds" nothing comes up.
What I did do is completely uninstall all traces of any installed Creative software and in the device manager did an uninstall for the SB Xtreme Audio Card.
My recording device is the integrated microphone in the Logitech Quickcam/IM that I have installed. If I go to accessories and click on "sound recorder" it doesn't start up either.
The other issue that I see is that when I go into Control Panel and click on Sounds, nothing happens.
Something is definitely going on but I can't seem to track down the cause.

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

(ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
CONTINUE ON-
Download RAR file with ISO inside and install if you don't have the installation CD
installation cd with EQ download: http://files.filefront.com//;689430;;/
If you do or after you finish downloading goto step A.
A) Take your Creative Driver/Install CD, copy it to your hard dri've.
B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
C) Set it for Windows XP SP2.
D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
E) Restart when told to
F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
Message Edited by jeepbme on 03-08-200708:50 PM

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Sound Blaster Live CT4620 and Windows XP can it work and h

Hello, I have an old Sound Blaster Li've Model CT4620 that I installed on my old PC (windows 95) and loved quite a while back, I have since upgraded my Pc to a newer model that has Windows XP Pro and was hoping to install my old much loved Sound Blaster Li've card but when I went to install the drivers from my origanal discs windows put up a warning that this version of driver was not compatable with my system. I have looked around the site and am lost. Is there any hope for me and my older Sound blaster li've card? If so what do I need to do, download, install to run it's I am not very PC smart so please take it slow for me Thank you!

XP drivers,?http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+XP&region=&Product_Na me=Li've%2&Product_ID=4857&modelnumber=&driverlang =033&OS=0&drivertype=0&x=3&y=7?And yes, just download and run the installer.

Sound Blaster Z SPDIF and optical cable + DTS and DDL settings

i bought a new z-906 to have as a speaker system for my computer. what i did was:
bought sound blaster z and a optical cable. i installed the software for the sound blaster z and started configuring it.
i plugged one end of the optical cable in the SBZ and the other end in the z-906. then i started configuring using windows sound panel and SBZ i first used the spdif-out on the panel but eventually that sounded a bit off to what 5.1 should sound.
then after a good while trying to figure out why it gave me the message "usupported format" when i was trying to use DDL or DTS. i searched on google then i read something someone else couldnt figure out and used that.
what i did to get DDL and DTS to work was: (might require a fresh install of SBZ and all services in msconfig to work)
i opened windows sound panel, clicked on spdif-out and pressed properties. then i clicked on formats or supported formats tab and enabled everything with a checkbox. then clicked OK or Apply.
back on the sound panel again. here you have 2 configs that comes with the sound blaster z. i clicked on speakers then on "use as standard. then on configure and selected 5.1 surround, and on the next, center, subwoofer and rear. and unless you got a 7.1 system (or you could configure this in SBZ panel) i dont think you would need left and right front and surround-speakers since its already enabled in the first window as enhancing then i rebooted and reinstalled the SBZ and made sure all the services in msconfig tab was set to start and run on boot. and voila i had sound. (just to clarify. i didnt have sound for awhile since the DDL and DTS settings made my speakers to snowy sound until i figured out why)

one other thing you need to set in your creative control pannel speakers mode not headset mode.
and also under the cinematic tab you have to enable : Encoder : dolby digital live 5.1
then you will get sound.
the issues will crop up though if you fix em let me know, if you want the issues to happen right away select DTS as encoder we/or i know this mode will not work with these headsets but thats the same issues that popup even under dolby digital live settings.

Sound Blaster External card and Windows

I recently up-graded from W/98SE to XP I have an external sound card Model SB0270, I have the card (USB) plugged directly into the back of my computer. My card was working just fine until I installed XP now my computer doesn't see my sound card. I have uninstalled and reinstall, re booted afterwards, shut down every running program before hand, everything you should and could do but still no sound. I do a diagnostics and it fails every time. I have tried to download software and driver upgrades but that too has failed because my computer says I need to allow pop-up. I have allowed pop up ads as directed, checked my firewall and it will allow junk in but still no up-dates and no sound. Under Control Panel, devices, Sound and Audio Device, hardware, Creative Sound Blaster, Properties, the message there is "this device is working properly" and it says "Use this device (enabled). I don't understand, Is there any help for this card, it is only 3 month old.
very frustratedMessage Edited by frustratedNJM on 0-20-2004 09:26 PM

FrustratedNJM,
Try running DXdiag on the card and see if the card passes the sound tests. Go to Start/Run and type Dxdiag into the run box then click Ok. Go to the sound tab and run the Direct Sound tests. Does it pass them? If so you may want to try to cleansweep and reinstall the Audigy 2 NX after finishing the USB chipset updates. Here is the article that deals with cleansweeping the drivers out.
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy

Sound Blaster Live Platinum and

Hello folks
I have a sound blaster li've platinum connect to a home theatre amplifier 5+ by coax digital out of front panel. Well when i play a DVD if i select audio in dolby digital i listen OK but i dont listen in dts. I fix dts input in my amplifier, but nothing sound. May depend by my sound blaster type? Thankssss Folco

You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

Creative sound blaster Z Khz and Format problems giving no more sound

Hi there.
First off let me say that i know little to none about audio, so i'm not a audiofile.
Second i have some qeustions/problems with mij Creative z soundblaster and hoped someone else has tackeld these problems and is willing to teach how to setup this sound blaster.
I'm using a Creative soudblaster z that is hooked up thourgh a toshlink cable to mij Logitech speaker set (z550) and till today al was working just fine!
But i recently read something about the (i hope i say this right) Sample rates or KHZ that can improve mij Sound quality, so i read thath the blaser z can handle up to 128 Khz or something... so i thought let's give that a try!
So in windows when right click on the speaker icon i got to playback devices and there i find 2 icons a SPDIF- Out and the Speakers icon of the creative z sound blaster.
So i went to Speakers and changed the Default format( default is 24bit, 48000) to 24 Bit, 96000 (Hz studio quality).
After this change i rebooted the computer and after the reboot al sounds where working!
So after that i decided to got The Spdif-out and go to the Supported formats page, here i unchecked the 48.0 Khz box and checked the 96.0 Khz box.
Also under Advance i changed the default format to 2 channel, 24 Bit, 96000 HZ.
Now when i pres the test button EVERYTHING WORKS, when i run the windows speaker setup thiny al 5.1 speakers react the way they supposed to react.
But when playing music or video there is no sound!
Everytime i reboot windows and start up Aimp to listen to some music, the music wil play but there is no sound! When aimp is playing and i w8 for like 5 to 10 minuts the Decoder light on mij speaker console will light up and then i will hear sound!
Normaly when i reboot windows the decoder light starts glowing imediatly now i either must w8 (this might tak hours somethime) or i go the sounds configuration and after pressing let's say 20x time the test souns button the sound start working for no reason!
So is there anyon who has these problems (oh yeah deinstalled and reinstalled driver 4 time by now so it aint the driver or mij speaker because mij ps3 aswel as mij ps4 work properly and do give me sound) or better yet know how to resolve this isseu!
Or did i not configurate the sound settings well ? please inform how i need to set them.
And oh yeah Like i said i'm no audiofile, but as far as i understand the BOX the creative z comes in, it tells me i can go up to 128 KHZ so... the 98khz Should not be the problem, the sound card should be able to do this ? right !?
So for everyone who read tis post Thank you for tanking the time to read it!
For those who replyed even more thanks
ooh yeah before i forget, if the post is a bit unclear for you pls don't hessitate to contact me or sent me mail for a more or better explenation of the problem, if you need aditional info PLS say so and i will post it

Set your SPDIF to default settings. The Logitech speakers will be doing all of the work DECODING what you are outputting to it with your sound card. The SPDIF is strictly digital. The setting in your "speaker" option sets up the Analog to digital conversion bit depth and sample rates. With dolby digital and DTS connect though those will output at 16 bit, 48 khz. If you were connecting to your logitech speakers with the three analog cables (green-front left and right, Black-rear left and right, and yellow-center and surround) then your setting choices in the 'speakers" applet of control panel, sounds would have an effect on downsampling, upsampling, and output quality.
Lastly, make sure to right click on the Speakers icon in the sound control panel applet and choose "set as default."

Differences between Sound Blaster Z SB1500 and SB1502 (OEM)

I gather the SB1502 is around $25.00 cheaper in the US, comes without the red shield and the mike. Also, read something about a 1 year warranty instead of 2 and cheaper capacitors. How much of this is true and what other differences am I missing? Thanks!

you might be interested in my free SBZ Switcher tool.
latest version includes an option to mute SPDIF-Out on switch to headphones (and unmute on switch to speakers). of course you'll have to initiate the switch via the tool's tray icon or configured hotkey for it to take effect, which also spare you the annoying manual switch routine.
also, many other included features & automations supported for your convenience

Sound Blaster 4 pro and RM-1

Cant seem to get this to work. only bought this yesterday. Tried new batterys, tried pointing a remote at the the box and red light flickers but NOT with the RM-500.Getting really hacked off, can anyone please help. Thanx

laverybugsy,
Since you didn't mention this in your post, did you go to the Entertainment Center settings and setup the remote option properly there?
Jason

Creative Sound Blaster Audigy LS and soundfo

Hi! i got an Audigy LS, is it possible to use soundfonts with Cubase For example?
i didn't notice any instrument lik synt A or B like Sbli've did.
T. I.A.
Massimo

I'm not completely sure of the answer, but the Audigy LS specs have both wavetable synthesis and soundfont support listed. That indicates to me that it should be possible.
-Dave
[email protected]

Sound Blaster Fatal1ty Chapionship and Z-5500 With Dolby And DTS Pack.

. I cant get the encoder to work on the program all I get is format is not supported. Im using a optical cable and Its driving me insane. Any help would be great. As you can tell what I have going on here on the screen shot but hell... I cant get dolby or DTS to work keeps giving me that message. <img border="0" width="799" src="http://i9.photobucket.com/albums/a90/bravounit9/Untitled-.jpg" height="653" align="bottom">@75.8.77.249

J. Ok so I got it all working..... But if it can only be played at 48khz I thaugh 92khz is better. Cause I notice when I went from prologic 2 to just optical Digital I dont see that number on my uppper right pud it doesnt say on there 96khz anymore.... :\ So what is 48khz suppose to be better? By the way thanks for all the help also. You guys been helpful.. Just like to know more. Im new to this whole dolby digital. My first speakers that are Dolby Digital. Never hade Dolby Digital speakers [email protected]

Sound Blaster Auduigy SE and Triton Xtreme 51 Headpho

Similar Messages

Maybe you are looking for