Sound Blaster Extreme Music do not detect changes on the console

I'm using the sound blaster X-Fi XtremeMusic with Logitech Z-5500 and the Flexi Jack, connected on Digital mode (Using Coaxial and Optical). The OS? Is Windows Vista Ultimate 32 Bits.
The problem at this moment is that I can not make any change on the console configuration, I mean, if I change the speaker connection or change any parameter of the configuration has no reaction,I even change the EAX effects, the CMSS-3D ad nothing happen, all that I can control with the console launcher is the volume.
I reinstall the drivers and download from the website the latest drivers I found and same problem.
?Any help?
THANKS?

Choose Soundblaster in the dropdown box and you will see XFi listed , you will find the latest drivers there....Seems rather strange to me since this is a XFi card, but hey I did not design the Website......
Message Edited by warriorking on 03-05-200706:40 PM

Similar Messages

  • X-Fi Extreme Music Card not detected by Creative driver installation

    ? Abit An-M2HD MOBO. I have x-fi music card (used). XP loads OK -- after failing a few times - - but can't install drivers, SB install program says no supported device detected. I see many posts about Nvidia N-Force chip boards having this problem, but I can't find one with a clearly identified solution. I do not have the problem with a million instances of multimedia listed -- just get a generic multi-media audio device with no ability to install drivers. I've tried using windows auto install, no dice, and both stand alone drivers and a creative install disc.
    Is there a fix? I don't want to reinstall windows, too much trouble. I'll sell the card before I get into that.
    Thanks
    Arnstein
    Message Edited by arnstein on 02-22-2009 0:42 PM

    Just an update for anyone having to deal with the same issue:
    everything works fine with the new beta driver 2.4.000.
    Thanks to Creative.

  • My sound works for music but not apps

    My sound works for music but not apps

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
     Cheers, Tom

  • Sound Blaster X-FI drivers not working

    I have a sound blaster x-fi card, im pretty sure thats the model, and i downloaded updated drivers that were supposed to support it i believe it was SBXF_PCDRV_XPVT_LB_2_18_0015.exe. After installation i have no sound at all and if i try to chose the volume mixer it gives me an error message: "There are no active mixer devices available..."
    It shows that it is installed properly and functioning in device manager and Windows Audio Service is running. After the updated drivers weren't working i rolled back to my previous drivers and the problem is persisting even with the old drivers that worked before. I'm at a loss I have tried everything i can think of even reloading drivers from the original installation cd from 2007 and i cant find anyone with the same problem on the net.

    the full model number of the device is sb0460
    I used auto update to find the offending drivers that are the whole cause of this issue. I know it is a problem with windows but it was caused by me attempting to update these faulty drivers. Updating the drivers is the only thing i have changed on the system that now has no devices available for playback. i have since uninstalled and removed the card from my mobo and switched to onboard audio and now that doesn't even work.
    Just like the sound blaster, the onboard audio's drivers are working fine and the device says its functional yet i cant select it as a default playback device and i get the same errors when trying to open the mixer.
    So basically the botom line is that the auto updater or the subsequent drivers that were retrieved by it messed up something in my system that even system restore cant fix.
    I would love to do a full re-installation of windows xp media center but this is a hand me down computer and i dont have the installation disks. I'll probably have to buy or request one then wait 6 months just to have a functional computer again.

  • I just tranfer all my photo from my Mac though itune to my iPhone so I can setup Mac back to factory setting after doing I try to put my photo vac to my Mac I photo did not detect any of the photo that I had tranfer from itune it only detectPLAESE  HELP!

    I just tranfer all my photo from my Mac from itune to my Iphone so I can setup Mac back to factory setting after I don't with that, I try to put my photo back to my Mac and Iphoto did not detect any of the photo that I had tranfer from itune it only detect the one rhat i took with the Iphone PLAESE  HELP!!!!!!

    Hello Partii,
    It sounds like you may use a POP account for your email.  With a POP account, email applications like Mail and Outlook can remove emails from the server, so when another device tries to check the server for new emails, it doesn't see any. 
    You may need to adjust settings in Outlook so that the emails are not removed from the server when downloaded.  I found an article with more information:
    When using a POP email account with multiple devices, email messages may only appear on the first device that receives them. This occurs when an email client is configured to automatically remove email from the server once an email client has received it. You can configure your email client (or clients) either to keep a copy of the email on the server, remove it after a certain number of days have passed, or keep it until you move it from your Inbox.
    I recommend reviewing the full article for steps on adjusting these settings; you can find the full article here:
    Using a POP account with multiple devices
    http://support.apple.com/kb/HT3228
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • USER EXIT/ BADI (The price should not be changed in the billing document)

    Hi all,
    We have given manual entry provision for pricing in Sales order level. But as per the company requirement, the price should not be changed in the billing document. Also the point to be considered is, it is a delivery based billing. 
    Kindly help me for finding USER EXIT/ BADI to achieve my requirement.
    Thanks.

    Hi,
    Please refer to OSS notes:
    105621 - Authorization check for the condition screen - you can use following user-exit includes for changing the condition tab to display only:
        USEREXIT_FIELD_MODIFICATION
        USEREXIT_PRICING_CHECK
        USEREXIT_FIELD_MODIFIC_LEER
        USEREXIT_FIELD_MODIFIC_KZWI
        USEREXIT_FIELD_MODIFIC_KOPF
    1165078 - Authorization check for conditions or subtotals - from ECC6.0 EHP4 there is a dedicated BAdI for authorization check, however if the user is not aurhorized to change the conditions, the conditions are not visible for the user as well.
    Regards,
    Marcin

  • Field VBUND does not allow changes to the document ?

    If you post the trading partner, the trading partner(Field VBUND)does not allow changes to the document.
    I can't change trading partner.
    Thanks!!
    Message was edited by: Rico Wang

    Rico,
    Using trn code SM30, modify table V_TBAER and insert the entry
    BSEG-VBUND for account type S, D, K, A
    and see the effect.
    Thanks
    Mohit
    ps: you may want to check OSS notes as well.

  • ITunes download is extremely slow or not working, am I the only one experiencing this, iTunes download is extremely slow or not working, am I the only one experiencing this

    iTunes download is extremely slow or not working, am I the only one experiencing this, iTunes download is extremely slow or not working, am I the only one experiencing this?

    I do not have a solution, just the same complaint.  ***!  !    I just used the iTunes store 2 weeks ago and now, after reviewing everything they asked for including ID/Pass/ Account Info etc.  I can't even get into the store.  I have tried asking at the Mac store and it has all been to no avail.  I was perfectly happy with iTunes before all of this ********... seriously what is the issue with iTunes?  They ask me to upload a new version (with no system specs anywhere that I can find on the page)  and then say it can't utilized because of system inadequacy.  It is exceedingly frustrating.

  • Detecting changes in the replication site list

    Is there a way, when using the replication manager, to detect changes in the replication site list without having to continuously call repmgr_site_list()?
    Even if you still need to call repmgr_site_list() to determine just what changed, it would still be useful to only call it when the result would be different than the previous call.

    Currently, no. However, we are working on an enhancement for a future
    release that would include such a feature.
    Drop me an email, if you like. My address conforms to the Oracle
    convention: [email protected]
    Alan Bram
    Oracle

  • Registry edit Apple requires is causing windows to not detect files on the DVD drive

    Registry edit Apple requires is causing windows to not detect files on the DVD drive. If I set up the registry it requires then the files will not be dected & if I do it the way windows requires then the files will be detected but ITunes will not be able to use the optical drive. Is there any kind of patch or something someone can help me with?
    Thanks O'Bie

    To fix registry, refer to this article:
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299

  • Can not log on in the console after installing the client

    i have installed a 10g server on my pc and everything went well, for the odp.net thing, i then installed a 10g client, after that, i can not logon the sql*plus in the console and got the tns error message "ora-12560", but i can still logon through the sql*plus gui. now i can not do anything in the console like "exp" and "imp" for i can not logon.
    is it the newly installed client which made things wrong, how can i work it out?
    thx in advanced.

    How are you connecting to this website? What is the exact, complete text of the error message?

  • Sound Blaster Z headphone/mic not working. I am sad :(

    Hello I bought a Sound Blaster Z yesterday. I am running Windows 8.1
    I have a Turtlebeach X12 headset and when I plug the mic/headphone jacks into the Sound Blaster Z I get no sound when swapping to headphones in the SB-Z control panel and also my microphone is not detected. I am using the latest drivers, I have disabled my on-board audio and uninstalled its drivers, and my X12 usb is plugged in for power. I also have double checked the connections from the headset to the SB-Z itself several times.
    Sound comes out of my speaker setup and btw its crystal clear and I am extremely impressed with how much better the SB-Z sounds over onboard audio.
    Thank you for help.

    Hi KingCheese,
    Glad you got to resolve your issue!
    We would really appreciate it if you could post how you were able to resolve it (if it is not too much trouble on your side).
    This is so that other forum members who might experience the same issue can be referred to this particular thread.
    Cheers!
    Philip-CL

  • Problems with Sound Blaster Live 5.1 (Cannot detect card) (Tryed CTco

    Ok I run Sound Blaster Li've 5.
    (SB0220)
    (C6SB022842604209p)
    Using Windows XP Pro SP2
    Unfortunetly i cant find the disc that came with my sound card
    I recently Reformated my computer and now I can't get my sound to work
    http://www.n00bstories.com/image.fetch.php?id=07204808
    http://www.n00bstories.com/image.fetch.php?id=24363942
    I know the "!" next to Multimedia audio device isnt the problem because that was there before i reformated when the sound worked.
    Ive Downloaded both:
    Li'veDrvUni-Pack(ENG)
    and
    Li'veDrvPack_Patch
    (Not 00% sure either of these drivers are the right thing for me sense when i type my model number into the driver search box it can't find it for some reason.)
    I always get an error message that says "Setup cannot detect sound blaster audio device on your system.
    Ive tried using Ctcomp with no luck
    Does anyone have any idea on how to get my sound card to work?
    Thanks in advance guys

    You don't say what drivers your using.
    2 threads to look at are http://forums.creative.com/creativel...ssage.id=25677 for drivers, and http://forums.creative.com/creativel...scending&page= for something that might help.You have a SB0228 according to that prefix.
    I think to loose that message, you may have to either edit the registry of use something like driver cleaner http://www.drivercleaner.net/
    Wow I'm too used to mark up

  • Creative Sound Blaster Audigy LS "WINDOWS CANNOT DETECT A SOUNDBLASTER HARDWARE" Issue!!!

    <EM>Hi all to cut the long story short I have had my audigy Ls card for a little over an year now, everything worked fine until I have decided to reformat my computer due to regular maintenance and this was roughlly 2 month ago, anyway I have explored all the different avenues and have found my self stranded to this point. </EM>
    <EM></EM>
    <EM>Basically</EM> <EM>I have the drivers (from creative official driver downloading page) for the sound card installed and its running fine however not flawless due to the fact that my original CD that came bundled with the card cannot be installed anymore, ever since I have reformatted my PC. windows just couldn't detect my exisiting AUDIGY LS card and keeps error out when the installation starts and states that windows can not detect a sound blaster card in your system etc etc. </EM>
    <EM></EM>
    <EM>Now I know for a fact that everything worked fine with the drivers installed correctly without any issue prior to my format. is there any any any any!!! way to actually overcome this nuisance ? Im getting really pissed of as I no longer could enjoy the full benefit of my sound blaster </EM>
    <EM></EM>
    <EM>e.g creative media centre, sound equilizer, 6/24bit adjustment. </EM>
    <EM>I have switched the card in other PCI slot, it's no use and I have tried and obviously failed to do everything I could to solve this problem. the onboard sound has been disabled.AC97 and I really couldn't figure out why...strange ...</EM>
    <EM></EM>
    <EM>I have searched the forum for valuable infomation as I seen a couple of people are suffering the EXACT same issue as I'am. </EM>
    <EM></EM>
    <EM>My system spec is as follows.</EM>
    Asus P4P800 Deluxe MOBO
    P4 3G CPU H. T Enabled
    G KINGSTON RAM
    6600GT WINFAST GFX CARD
    <EM></EM>
    <EM></EM>

    Hi All,
    I am pretty much in the same boat but with an Audigy 2 Value Sound Card.
    Removed some old piece of rubbish card (6MB Aztech PCI 288 Q3D using a Trident 4DWave-NX Chip.... yes about 6 yrs old !) in my daughters pc and replaced it with the new one.
    Same error message i.e. hardware not detected... ihave already posted as im trying to find and install the right drivers. I have also tried the PCI-slot hopping etc etc.
    So what next people ?

  • Event Structure's value change, not detecting changes when tabbing thru array of clusters

    Hi!  I have an array of clusters (int, int, string, int) control, and want to detecting changes made to the it.  I used the Event Structure's value change case on the array, it works excellent except that it'll only detect the changes when you click out of the element or press the enter key (the one by the numbers, not carriage return).  I want it to detect the changes when I tab thru the cluster or array too, but I can't figure it out... Does anyone have any ideas?
    Thanks!

    mfitzsimons wrote:
    altenbach
    Tried Value Change with my example done in 7.1 and it doesn't trgger an event.  That is why I suggested Mouse Down.
    Curious. I did a few minor edits in 8.0 before saving as 7.1, but the simple value change event got triggered just fine when the value vas terminated with a tab in 7.1. Every time.  Strange....
    Are you on 7.1 or 7.1.1? Maybe there's a difference (I am using 7.1.1).
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for