Sound Blaster Fatal1ty Chapionship and Z-5500 With Dolby And DTS Pack.

. I cant get the encoder to work on the program all I get is format is not supported. Im using a optical cable and Its driving me insane. Any help would be great. As you can tell what I have going on here on the screen shot but hell... I cant get dolby or DTS to work keeps giving me that message. <img border="0" width="799" src="http://i9.photobucket.com/albums/a90/bravounit9/Untitled-.jpg" height="653" align="bottom">@75.8.77.249

J. Ok so I got it all working..... But if it can only be played at 48khz I thaugh 92khz is better. Cause I notice when I went from prologic 2 to just optical Digital I dont see that number on my uppper right pud it doesnt say on there 96khz anymore.... :\ So what is 48khz suppose to be better? By the way thanks for all the help also. You guys been helpful.. Just like to know more. Im new to this whole dolby digital. My first speakers that are Dolby Digital. Never hade Dolby Digital speakers [email protected]

Similar Messages

  • Sound Blaster live! not found when I try and update dri

    I had ordered a Dell PC with Sound Blaster Li've! I double checked and made sure I have the correct Sound Blaster which I do. I have uninstalled and reinstalled sound blaster li've! and it still does not let me update my driver. I took the CD out put it back then tried updating the driver and still it says no Sound Blaster Li've found.
    pls help
    Driver I am trying to download
    Sound Blaster Li've! - Li'veDrvUni-Pack (English) (<FONT color=#222222 size=><B>23.32 MB</B>)
    <FONT color=#222222 size=>
    This package upgrades the Sound Blaster Li've! driver and enhances the overall product performance on Windows 2000 and Windows XP. The package also upgrades core applications including Audio HQ and Surround Mixer for optimal Sound Blaster Li've! performance.
    div>

    VegetaH wrote:
    I had ordered a Dell PC with Sound Blaster Li've! I double checked and made sure I have the correct Sound Blaster which I do. I have uninstalled and reinstalled sound blaster li've! and it still does not let me update my driver. I took the CD out put it back then tried updating the driver and still it says no Sound Blaster Li've found. pls help Driver I am trying to download Sound Blaster Li've! - Li'veDrvUni-Pack (English) (<FONT color=#222222 size=><B>23.32 MB</B>) <FONT color=#222222 size=> This package upgrades the Sound Blaster Li've! driver and enhances the overall product performance on Windows 2000 and Windows XP. The package also upgrades core applications including Audio HQ and Surround Mixer for optimal Sound Blaster Li've! performance. div>
    Dell .... try if you can DL Dell 'made' drivers from Dell Support.
    jutapa

  • Just bought a dell pc with windows 8. on my old pc (vista) i would right click a movie (in itunes format) and say open with itunes and it would play. Now it won't open in itunes and it just CRASHES. HELP PLEASE. is there a glitch with win 8???

    okay not sure how this works so here i go again.
    Okay i bought a dell pc with windows 8 (big mistake) i downloaded itunes and from my external hard drive, right clicked a movie file (in ipad format, because this worked in vista on my old laptop) and it will not go into itunes. And itunes keeps crashing. Is there a glitch with win 8 and itunes ? I never had this prob with vista. I would right click a file and say open with itunes and poof it goes in the library. Please help before i throw this thing out the window! OH newest itunes is what i have installed.

    Take a look at this MBP, a refurbished unit.  Don't let the late 2011 release date put you off.  For about  $500 less than an equivalent 'new' one with similar specifications you get a quad core CPU and excellent graphics.  As Steve359 mentioned, this can be upgraded if the need arises and has the same warranty as a 'new' one
    I would not be surprised that these may actually be 'new' MBPs due to the length of time that they have been replaced by the current generation.  I purchased a 17" model about 5 weeks ago, and a serial number check suggests that it is 9 weeks old.
    http://store.apple.com/us/product/G0NM5LL/A
    Ciao.

  • My contacts all got deleted from my phone, and was replaced with names and numbers of people I've never met before.

    My phone was working as normal, then all of a sudden when I checked my text messages all the names of my contacts got replaced by their actual phone numbers. When I checked my contacts, it looks like everyone got deleted from my phone, and was replaced with names and numbers of people I've never met before. Even when I check my icloud for a backup it has the same issue. I don't know how this is possible and not certain as to how to rectify and get my contacts back.

    Hi Also iPhone, need update to ios 8.1.2 do this over WiFi Use same Apple ID & Password. Cheers Brian

  • Programming Cameras and Pan-Tilts with DirectX and Java

    Hi everybody!
    I am looking for the book and CD for the book "Programming Cameras and Pan-tilts with DirectX and Java", by Ioannis Pavlidis, Vassilios Morellas, Pete Roeber. Morgan Kaufmann 2003. It is out of print. I cannot find it anywhere.
    Does anyone have a copy of the CD-ROM and would be willing to sell it to me?
    Many thanks for your help and input!
    Cheers,
    WP

    can you share cd-rom?
    Or can you send me the url where I can find the cd-rom?
    agungws
    agung at gmail dot com

  • I have 10Gb of photos on my iphone, so can choose only half of it (5Gb) and share it with icloud and leave the rest on my phone storage, or i must share all photos and videos (my whole camera roll)

    I have 10Gb of photos on my iphone, so can choose only half of it (5Gb) and share it with icloud and leave the rest on my phone storage, or i must share all photos and videos (my whole camera roll)

    No.  Your iCloud account only includes your the camera roll photos stored in the backup.  And they can only be accessed by restoring the backup to your phone.  Also, if you delete any photos from your camera roll and continue to back up, the backup that contained the deleted photos would be overwritten by one that doesn't and they would be lost.
    If you want to save some of them and delete them from your phone, import them to your computer as explained here: http://support.apple.com/kb/HT4083. 
    Another option is to import all of them to your computer and delete them from your phone, then put the ones you want on your phone in a folder and sync them back to your phone by selecting the folder on the photos tab of your iTunes sync settings and syncing.  The advantage of this approach is that synced photos are placed in an album called Photo Library, which is not included in the iCloud backup (since they are already backed up on your computer), thereby saving space in your iCloud account (which only backs up camera roll photos).

  • My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue

    My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue

    i have the same problem...my ipod is 4th generation?uggghhhhh

  • I synced my sisters phone with my itunes and now all her contacts have disappeared and been replaced with mine and also photos... she has never done a back-up is there any way we can get all her contacts and pictures back?

    I synced my sisters phone with my itunes and now all her contacts have disappeared and been replaced with mine and also photos... she has never done a back-up is there any way we can get all her contacts and pictures back?

    Look under iTunes>Preferences>Devices...is there a backup listed for her phone? First thing done when you sync is an iPhone backup. If you have not synced since screwing her phone up, restoring from that backup(if it exists) should restore her content. Do not sync after you restore her phone, eject it. So, first disable auto-sync on that same device pane in iTunes before you proceed. If this doesn't work, is your sister bigger than you? If so, run 'cause her data is gone .

  • Cmss 3d doesnt work with dolby digital live pack

    0cmss 3d doesnt work with dolby digital li've pack4 From the page of Dobly Digital Li've pack
    "Stereo content (MP3, WMA, CD audio or games) that is transformed into 5. surround sound using Creative CMSS-3D or DTS Neo:PC can also benefit from this encoding scheme that will further enhance the entertainment value of your Sound Blaster X-Fi."
    with that said, i bought the pack that has both DDL and DTS Interacti've. but while playing music my reciever only gets front left and right channels. No sound comes from the center or rear channels. This is with CMSS 3D on. With analog all 5 speakers work. Before installing this pack, my reciever got PCM input from the optical line. Thus only the front channels working. now with this pack the speaker recognises that the signal is Dolby or DTS yet, only the front channels work. in short there is no difference with this pack.
    could someone please explain to me how to get the whole 5. working with Dolby or DTS
    thank you
    Sound Blaster X-Fi Platinum, Driver 2.8.003
    Windows 7 x64 Build 700

    thank you for the promp reply
    the problem was with the reciever. just a change in setting was all it took
    but now i have anoter problem
    how do i bypass dolby and dts signals from movies to my reciever
    before i simply had to set spdif out as default sound device and set ac3filter to spdif passthru
    now the driver panel tells me that SPDIFOut will be exclusvely be used by DTS Interactiv. it doesnt pass the signal through from Media player classic or powerdvd.
    am i expected to turn off DTS Interacti've or DDL when watching a movie and needing to pass on the signal?

  • Sound Blaster 5.1 Live Ls card with a durabrand home theater sys

    Greetings All
    I have a sound Blaster 5. Li've Ls card
    And just bought a durabrand home theater system with a sub wolf and 5 speakers it has a port for pc?s but I all I hear when I plug it into the digital out is very faint sound with a lot of static I know that the papers that come with the sound card suggest creative inspire 5. digital 5500 however it does not say that it will not work with other speakers.
    But none the less I am asking you all what should I do and is it the speakers or is there something else I got to do?
    I plugged it into the normal speakers out and worked of course I the digital output was unchecked when I did that.
    So what do I do
    i have windows xp pro sp2
    Thank you all

    scrach everthing I got in contact wiht the HT and they told me that the one i have has no digital sound.
    now i would like know how mutch dif is there in it and will i not be able to enable 3d sound on pc's wiht out it's

  • Audition 3.0 Sound Blaster Fatal1ty card audio input ASIO issues

    I just installed a Sound blaster extreme gamer fatal1ty pro sound card. I've got it working but when I try to open Audition #.0, I get the error about audio input not activated. I can play but I can't record. when I try to, I get a message about the ASIO driver is invalid and change settings in audio hardware. When I go there, the option for input is greyed out. I can record in Audition 1 without any problem so I think I've got the sound card installed properly. Also, I did an upgrade from a Audigy card that worked but had a lot of lag in voice tracking. Any thoughts? Thanks

    Download ASIO4ALL, install it and you should be good to go.
    Link: http://www.asio4all.com/
    Consumer cards like the X-Fi/Audigy series from Creative Labs are not good choices for recording. They're great at gaming (I have an X-Fi on my game machine) and playing movies on your PC but for professional audio applications one needs a professional audio card.

  • Sound blaster audigy 2 zs not working with vi

    ok so my sound blaster worked fine with xp and i upgraded to vista and it isnt working at all. i tried to install the driver from creative's site that is supposed to work with vista. when i run the install it says it is missing a bunch of files like layout.bin and setup.exe, setup.ini,and a bunch of crap like that...i even tried getting these files from somewhere else and putting them in the install folder, it ran without missing files but gave me the same error at the end, I-00. THEN i even tried using the cd it came with when i bought the card on xp, it worked with a few minor errors but at the end it recognized my card but i get absolutely no sound at all...

    The problem you are getting has to do with InstallShield and most probably your?Vista configuration... Make sure you are running as administrator and check the log files in the Program Files/InstallShield... folder to see exactly what files you are missing. There is a Creative Knowledgebase article about it, so do read it. Also do remove any Creative XP software, especially make sure you removed the InstallShield Creative folders (in the same location as above), as these have been known to cause Installation failures.

  • PCMCIA Sound Blaster Audigy 2 ZS, connection to Mixer in and out

    I have a PCMCIA Sound Blaster? Audigy? 2 ZS card attached to a laptop. I want to connect this laptop to a Denon X300 Mixer (http://www.platinum-records.com/Deno...0-prod7243.htm) so that I can untilize music on the laptop dri've, into the mixer board. Then I would like to stream this music back into the Computer for recording/manipulating on the laptop.
    I think I have the link to the mixer figured out (use provided cable and a mini plug to RCA patch to the line in on the X300 Mixer) but the link back to the computer I am having issues with. Any Suggestions appreciated!
    Spindu

    dilip wrote:
    Hi I have PCMCIA Sound Blaster Audigy 2 ZS Notebook audio card with my Thinkpad laptop. I have bought Onkyo HT- S580 Hometheater system. I was hoping to connect the Line out, Line out2, Line out3 jacks to the receiver's Front, Surround(rear) and Center in jacks. The color on the Onkyo Recei'ver end are Center - Green , Surround(rear) - Blue , Front - White The color on the Creative Card end are Center- Orange , rear - Black , Front - Green There is color difference between these two ends . Is it advisable to connect these two jacks ? Please recommend the suitable cable type and name for this connection Thanks
    Hi
    Colours may vary --> just connect by the instructions from both manuals.
    There are good explanations for
    - Stereo and 4-Pole Jack Diagrams
    - Connecting a multichannel home theater receiver
    - cabletypes needed on connections
    on User's Guide.
    NOTE: This User's Guide can be found on your driver CD too.
    Also, here is the Onkyo HT-S580 manual.
    jutapaMessage Edited by jutapa on 0-0-2006 03:32 AM

  • Any Sound Blaster X-Fi Elite Pro issues with vista ?

    im going to buy Sound Blaster? X-Fi? Elite Pro for vista32 +5500z speakers. anyone have any installation issues etc...

    will work fine with newest drivers.

  • Sound blaster omni surround 5.1 problem with mp3 player line in

    For some reason, in the sound blaster omni surround 5.1 mac software, the line in volume is stuck on mute. I cannot select it, which does not allow me to move the volume up or down. How do I fix this?Screen Shot 2014-10-17 at 8.07.00 AM.jpg

    Originally Posted by xnathanmeyerx
    For some reason, in the sound blaster omni surround 5.1 mac software, the line in volume is stuck on mute. I cannot select it, which does not allow me to move the volume up or down. How do I fix this?Screen Shot 2014-10-17 at 8.07.00 AM.jpg
    Hey xnathanmeyerx,
    Please select Line-In of Sound Blaster Omni Surround 5.1 as the default Input for the Mac computer. It can be configured at Sound under the Mac System Preferences. I hope this helps.
    All the Best!!
    Yours sincerely,
    JL

Maybe you are looking for