Sound Blaster Live! 24 "no audio device" no so

I tried to install the driver with autoupdate it installed fine but there is no sound and in "Sounds and Audio Device Properties" it says "no audio device" but the driver is installed in device manager.
specs
nf6v
built on realtek hd audio ALC86: disabled in bios
Sound Blaster Li've! 24-bit
Windows XP sp2
Thanks

I just got this card.
first I installed
Filename: SB24_VTDRV_LB__04_0077.exe
This suite of drivers and applications has been updated and combined for your convenience. It installs the following applications to control your audio device's settings. For more details, read the rest of this web release note.
Applications included in this release:
* Creative Audio Console (for Windows Vista? only)
* Creative Device Control
* Creative EAX Console
* Creative Speaker Settings
Added Features or Enhancements:
* Enables 44. kHz sampling format for SPDIF In and Out.
Requirements:
* Microsoft? Windows Vista 64-bit, Windows Vista 32-bit, Windows? XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
* Sound Blaster? Audigy? Value/SE/LS, or Sound Blaster Li've!? 24-bit audio devices
Notes:
* This pack is only for the Creative Sound Blaster audio devices listed above.
DO NOT install this pack for Sound Blaster Li've! 24-bit External.
* To install this pack
. Download the file onto your local hard disk.
2. Close all other Windows applications.
3. Double-click the downloaded file.
4. Follow the instructions on the screen.
THEN I installed this driver
Filename: SB24_WEB64_LB__04_0055.exe
This standalone driver provides Microsoft? Windows? XP Professional x64 Edition, Windows XP Service Pack 2 (SP2) and Windows 2000 Service Pack 4 (SP4) support for your Sound Blaster? Li've! 24-bit and Sound Blaster Audigy? LS internal audio card.
Requirements:
* Windows XP Professional x64 Edition, Windows XP SP2 or Windows 2000 SP4
* Creative Sound Blaster Li've! 24-bit or Sound Blaster Audigy LS audio card
Notes:
* The contents of this driver are similar to those in your original installation CD, with the addition of Windows XP Professional x64 support.
* This driver does not support USB Sound Blaster Li've! 24-bit External audio devices.
* To install this driver:
. Uninstall any existing audio device drivers before installing this driver.
2. Close all other Windows applications.
3. Launch the Creative Sound Blaster Li've! 24-bit and Audigy LS driver.
4. Follow the instructions on the screen.
5. Restart your computer to complete the driver installation.
* Subsequently, please download the Creative Basic Audio Suite for Creative Sound Blaster audio devices :
. Launch Creative Basic Audio Suite for Creative Sound Blaster audio devices.
2. Follow the instructions on the screen.
3. Restart your computer to complete the driver installation.
the card works fine in linuxMessage Edited by wuhlei on 0-27-200709:36 AM

Similar Messages

K8N Sound Blaster(p17) Suddenly Invisible to Device Manager

I have Onboard Sound enabled in the BIOS, and I did have sound working for many months until I woke up this morning, turned on the PC and heard a "BEEP" from the PC Speaker instead of the usual windows event sounds. I looked at the Device Manager and my sound hardware was just.. Gone! Invisible! Disappeared!
I re-installed the audio drivers(specified in the downloads section of the MSI site for my particular motherboard: Sound Blaster Live! 24bit, or p17) but they did not detect their hardware. I even tried re-installing the mainboard drivers package(C51_CK804_MN30003.) What's even more strange is when I go into the BIOS and *disable* onboard sound, a mysterious unnamed "PCI Device" gets detected by windows(it goes away again once I re-enable Onboard Sound.) It had been suggested in other forums that un-installing it from Device Manager would make windows re-detect the hardware, but in this case there is no device to un-install!
Please help me help you help us all!
Here are my specs:
MSI K8N Diamond Plus(AMD socket 939)
Antec 430 Watt ATX PSU
AMD Athlon 64 4000+ (2.4gHz)
Corsair 1gb(2x 512mb) DDR400(PC3200) RAM
nVidia GeForce 6800 GS
WD 250gb HD
Windows 2000 Professional

BOSSKILLER:
The OS did not pick up the card. I saw no difference when placing it in both PCI slots, onboard sound disabled in the BIOS for both cases. IOAPIC is enabled and MPS Table is set to 1.4
Kane3_162:
I don't have any working floppy disks(all I had remaining were tested and failed!) But I did try flashing the BIOS using the LiveUpdate feature on the MSI website. The latest version they listed was 1.2, I was very paranoid about doing this without the ability to make a rescue disk... Where did you get version 1.34?
The BIOS update did not help in detecting either the onboard or PCI audio; I became suspicious of the PCI card itself, and dug around in the closet for another, found this ancient ct4740 16bit SB card and it was detected!
So now I have PCI sound, an updated BIOS, and a vaguely stupid feeling for not suspecting the first replacement card... Thanks again everyone, I hope this thread turns up in search engines everywhere, as a lot of good advice was given despite the simplicity of the problem: A burnt out onboard Sound Blaster Live! 24bit(P17) ... It happens
This seems like a coincidence, but I remember rolling back the nVidia Forceware Beta drivers before this happened. I went from 163.44, which was force-installed with the BioShock demo, and did a rollback to 94.24 because it was messing up a few games. Rebooted once and everything seemed ok, shut the system down and next time it was powered up the onboard sound was toast... But then it could have also been the wind storms and power fluctuations in the neighborhood, who knows...

BA7500G + Sound Blaster Live! 24-bit + Windows 2k = no sound

Similar to the thread for Win XP, I have inherited a BA7500g speaker system, and purchased a new Sound Blaster Live! 24-bit card for my Win2k system. Cannot get the speakers to work, although the speaker test works from the BA control unit. Noticed the digital audio input cable is color coded, and I don't have the original card that matches this scheme. Could this be the problem?

I have installed a new (not used) Soundblaster Audigy SE and BA7500G speakers and I'm running XP Pro. I'm getting no sound even when I change to Digital Out only? Not sure what to do? Is this sound card not compatible with my speakers? Do I need to purchase the Digital I/O Module that Creative is currently not in stock? I can find the Digital I/O module on Ebay if need be but not sure that's the solution. Please help!
Thanks,
Kevin

Sound Blaster Audigy ADVANCED HD Audio??

I had this for my Dell XPS M70 on Vista but now that i've upgraded to windows 7 i can't find anything on this.
I tried to download the windows 7 driver("SB24_PCDRV_LB__04_0090") from creative's website but it says it does not detect any supported device on my computer.
Am I missing something else here?

AeonSpace wrote:
Notebook: Dell Inspiron 6400
OS: Vista 64-bit
Sound card according to Dell: Creative Labs Integrated Sound Blaster Audigy ADVANCED HD Audio
I am unsure which driver to download for this sound card. Would it be simply the "Audigy Series" driver? This particular name is not mentioned in the supported cards.
The Audigy Advanced MB isn't a device, it is an application that makes your onboard sound sound better. Therefore, it doesn't have a "driver", the only drivers involved would be the driver for your onboard sound, which you need to get from Dell.
As for the application itself, it is my understanding that it's not ready for Vista yet, and I am currently trying to get an update on that situation.
Dale

Creative Sound Blaster X-Fi Xtreme Audio (PCI-Express) + Vista 32bit an media pla

Hi folks,Maybe someone here can help me with this issue, I recently bought a Creative Sound Blaster X-Fi Xtreme Audio 7. Sound Card - OEM (PCI-Express), it arri'ved with the cd with software and drivers on it and i installed it into my vista 32bit without any problems.On rebooting my sound was working normally and as far as i could tell all was great untill that is i went to play some mp3 using windows media player, wmp kept telling me it couldnt play the file type then i tried to play a wma file an got the same thing, basically almost all audio types will no longer play in wmp. I rolled back the driver to use the microsoft driver (high defination audio device) and everything is playing in media player again.Only now i cant use the software suppiled with the card. Anyone have any idea how to use the creative driver and get wmp to play properly thanks in advance.
(in addition) after some messing around with various settings i discovered that this seems to be caused by the sb enhancements, when i disable them in speaker properties wmp plays as it should, althought i am rather disappointed that i have to disable the features on the card inorder to get it to work properly.

Hi Orion,
You might want to get in touch with support to enquire about the CD.

Sound Blaster X-Fi Xtreme audio lag prob

Hi,
System sepcs:
XP SP3
AMD 2.5GB Dual Core
2GB 800MHz RAM
500GB HDD 32MB cache SATAII
I have a sound blaster X-Fi Xtreme audio card and have the latest drivers. when i play any type of sound, music, movies etc the sound seems to 'lag' or play very slow and i tried re-formatting my computer but still no help.
Any help/ideas is greatly appreciated.

With your Evolution e49 keys (USB), did you install the drivers to add the USB Midi In via the Properties MIDI music Playback. Once you install the drivers for that USB device, you will have the option to select and change to the USB midi device in Properties MIDI music Playback. This can be easy to do in windows xp, not in vista. In vista you have to have some DAW software installed, such as "Cakewalk SONAR Home Studio 6" to change the midi devices around within the DAW software. In audio console, you have :?MIDI Device:
SB X-Fi Synth A [EC00]?This is normal and will not see a change or can not be changed within the audio console.
I have the E-MU Xmidi x (In/Out) USB midi cable. I had to install the USB midi drivers for this device, both in Windows XP and Vista. In Windows XP>Properties MIDI music Playback, I can change to the E-MU Xmidi x USB device and use.
??Message Edited by freesky on 2-8-200709:58 AM

MSI KT3V + Sound Blaster Live Problem

Hello Guys
First, sorry for my english, i'm polish.
Yesterday I sold my old motherboard (Shuttle AK32A), and i bought new motherboard MSI KT3V. After instaling all peripheals I install on formated partition Win2000 SP3, Via 4in1 4.45, Drivers for my GF4 MX440, Network Adpater 3Com-SOHO, and sound blaster Live 1024. After this i instal game IGI2, and try play, After 30 s. in game main menu my computer crashes, screen is black, led on monitor is lights on yellow, after this i hear 10 - 20 second music from main menu in speakers, after this time my computer crashes completely, a hear beeeeeeeeep from speaker, and this moment I can only push reset button :(
I try install many version drivers, from orginal cd, downloaded from internet. And newest version from 1.03.2002. An nothing :( I remove my Live 1024 from computer, and put friend live 5.1, and no changes, computer crashes :(
My desktop resolution is 1128x864x32 bits 100hz When i try play Divx movies after 1 - 2 minuts, frequency of my screen automatic swicth to 50 hz. If I try manualy switch frequency to old value (100 hz) nothing hapend, and i only can restart system :(
When i work on my desktop (Word, IE, Winamp etc.) after 5 - 20 minutes, my system crashes too (yelow LED on monitoir, black screen, same situation) and I can only push reset button. When i remove card from pc, or turn card off in device manager all works fine.
I upgarde bios to newer wersion (1.8), reinstall drivers, reinstall windows in APIC options turned off, remove network adapter, and no changes :(
P.S. On old Mothearboard all works fine :(
Anyone can help me solve this problem. Please
Grettings Mark
My Hardware
MB: MSI KT3V
Athlon 1700+
512 MB DDR 266 Mhz
3Com-SOHO Network Adapter
WDC60 GB + 8.4GB Seagate
GF4MX440 64MB InsideTNC
CDRW Teac 40x, CD LG52x

Quote
Originally posted by maesus
Also set PCI Delay Transaction enabled.
This was a solution for my problem :-)
Thank you very much. You have beer from me :-)
Grettings

New Driver Creative Sound Blaster Live! 24-bit 1.04.0050 WHQL For Windows x64

This is the new Official Audio driver released by Creative for Sound Blaster Live! 24-bit for Windows x64.
You can not install this driver in your MSI nForce4 based boards without first applying the OnBoard Sound EEPROM fix first found here
You have to boot in win98 or winMe using a boot diskette in order to run the fix.
enjoy
Markoul

Quote from: Markoul on 22-May-05, 00:07:32
This is the new Official Audio driver released by Creative for Sound Blaster Live! 24-bit for Windows x64.
You can not install this driver in your MSI nForce4 based boards without first applying the OnBoard Sound EEPROM fix first found here
You have to boot in win98 or winMe using a boot diskette in order to run the fix.
enjoy
Markoul
Have you actually tired it yourself? I'm wondering if this is a workaround, or will this be the official solution. I wouldn't mind trying it, but I don't want to mess it up for when the Official driver is released.

Sound Blaster Live! Platinum 5.1 and DTT2500 5.1

Hello!
I have a Sound Blaster Live! Platinum 5.1 and a Cambridge Soundworks DTT2500 5.1 Digital Sound System.
I linked them with with the SPDIF-Out on the Live! Drive.
First i thought it works but then i realized that there is only sound from the 2 front and the center speakers. There is no Signal on the Sorround Speakers.
When i do the sound test in the sorround mixer, only the left and the right front speakers work.
Do i have to link it with this 9 pin digital din cable? But i don't have such and don't know where to get.
Can you help me?
How do i have to link this devices?

You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express 1)

Hi, I've recently bought a SB X-Fi Xtreme Audio (PCI Express edition).
Before I address my issue, I'd like to point out that my rig is:
Maximus Extreme (mobo)?
Q6600 (cpu)
ATI4870 (vid card)
4Gigs of DDR3 (ram)
and my OS is Vista Home Edition (32 bit precision)?
And so after physically installing the hardware, I quickly installed everything there was on the CD- this included the drivers available on the CD. After this installation, I restarted then found most recent updates via online sources (creative.com). But even after all of this, I wasn't able to get my microphone to work. Now from my understanding, the jack is shared between Line-In and Microphone and I'm supposed to configure this setting. And so I tried to do that, but my only problem was that I was unable to use any of the available features. After researching for a few hours I found out that I, appearently have to uninstall everything that I had installed and then reinstall everything from online sources (from creative.com-- latest drivers for vista 32 bit). But even then, I still can't use my mic or configure the settings so that I could use microphone instead of Line-In.
Now going back to my actual question, how do I configure the settings so that I could use Microphone instead of Line-In?

ERe: Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express )[ Bumping.
Almost the same problem here.
Sound Blaster X-Fi Xtreme Audio edition, Windows 7 64bit.
I downloaded the latest driver from the Creative site, installed it, update with the update manager and then i installed the console.
Issue number : I DONT have your same console. I dont have a "Mode" button, im stuck in Entertainment Mode. I cant control almost nothing and i dont have all the options u have.
Issue number 2: My mic isnt working good. It's VERY low on volume, i cant be heard without the +20db boost (the only boost option i have, i cant boost more) and even with that acti've that's not that loud.
It is still working good with my onboard realtek soundcard. I cant understand what's the problem and how to solve it.
Ah, my headset is a Creative Fatality.

Sound Blaster Live 5.1 - SF1 damaged.

houk
Yesterday I've found on my SBLi've5. that subassembly signed as SF (near MID/Gameport) is corrupted (looks like burned out).. Is this little one correspond with using an eventual midi keyboard od game controller? What kind of component is that? Resistor? Or something else? If this thing is important for communication through MIDI/Gameport, and if yes - could it be repaired by changing invalid component?

Originally Posted by dogweed
I lost my install disk for my sound blaster live 5.1 model SBO 100 for windows 98se. I cant seem to find drivers on creative's web site that will work with my card. Any one know where I can get them.
Here:
http://ccftp.creative.com/manualdn/D...BL51_W9xME.exe
Creative Surround Mixer (Windows 95, 98, and Millennium)
Creative AudioHQ (Windows 95, 98, and Millennium)
Creative Installer 1.00.07 (Windows 95, 98, and Millennium)
here:
http://www.vogonsdrivers.com/index.php?catid=3
or here:
http://www.touslesdrivers.com/index....ge=12&v_code=4
Next time please use 'uncle google'...

CREATIVE SOUND BLASTER LIVE 5 voice dist

I have a CREATIVE SOUND BLASTER LIVE 5, I want to know if some?software of Creative labs?exists to distort the voice in real time.Pablo Castillo R.
http://pablocr.pe.kzMessage Edited by pcr_sof on 06-08-200709:48 PM
Message Edited by pcr_sof on 06-2-200708:36 PM

Take a look at the following thread:http://forums.creative.com/creativel...message.id=994?That is the best you can get. Did you run WindowsUpdate to get the drivers installed?If you did, just change the speaker setup to?4 speakers, then check and uncheck the?Digital Output Only checkbox to get sound back.

GDriver of Sound Blaster Live! 5.1 Digital (Model: SB0220) for Windows 7

My Sound Blaster Live! 5. Digital cannot work after Windows 7 is installed. Is driver for Windows 7 available? If not, any alternati'ves? My multimedia speaker is Boston "Digital BA735" which is used to work with the digaital output the this sound card under Windows XP.

Try kxproject site for driver

Definitive Vista Driver for Sound Blaster Live!

Is there a "definitive" 3rd party driver solution for the Soun Blaster Live! 5. (including Dell Digital version) that enables all features including the digital out If no one agrees on a single solution can we get a list of options here. Here is what I have seen so far http://forums.creative.com/creativel...ssage.id=23567 http://forums.creative.com/creativel...scending&page= http://www.aeonity.com/david/creativ...vista-download Sound Blaster Live! - LiveDrvUni-Pack (English) KX project driver Anything else Which is best Anything new

Download Sound Blaster CD ISO?s:
http://hosted.filefront.com/BadBoyforum
Creative Li've! 5. Digital Drivers:
http://es.europe.creative.com/support/downloads/welcome.asp?bEOSLAgree=yes&action=next&sOSName=&re gion=3&MainCategory=266&Product_Name=Li've%2+5%2E+ Digital&Product_ID=853&modelnumber=
Message Edited by Rad-Wulf on 07-27-200709:28 PM

Creative Sound Blaster X-Fi Xtreme Audio: Many issues I have been faci

Hello everyone. This is my first post at these forums, with the hopes of getting my issues resolved once and for all.
First and foremost, let me inform you that I have very high experience with computer hardware.
A couple weeks ago, I bought a Creative Sound Blaster X-Fi Xtreme Audio sound card from a local retailer. (Yes, I am aware that this is not an actual X-Fi card with the designated chip). I previously had an onboard sound solution on my motherboard, and uninstalled and removed all of the drivers COMPLETELY before I installed my new sound card. I then opened up my case, and continued with the installation of the card. After I had downloaded and installed all of the latest drivers, I immediately started to notice issues with the card. My MAIN problem is that if I have a specific application open, whatever it may be, one of my headphones, either left or right, will stop producing sound, and then is followed by the second one, which leaves me with no sound output at all. If I restart the application, the problem is temporarily fixed, but then comes back again within a few minutes.
This is VERY irritating to me, seeing as I originally thought the problem was not with the sound card. Believe it or not, I reinstalled my copy of windows over 5 times throughout the course of the last few weeks in hopes of finally fixing the issue. And here I am, on a brand new installation of windows, and the problem STILL persists.
I can assure you all of my hardware is functioning correctly as I have tried 2 other sound cards which have not had any issues like this whatsoever.
Yes, I have read the FAQ, but I couldn't seem to find the solution to my issue there, which is why I am posting it here. Sorry if I sound irritated, but this has bothered me very much and I have been starting to lose a lot of hope in Creative...
Thanks in advance.

Anybody?

PCI Sound Blaster X-Fi Xtreme Audio Get No Digital Sound Out to my Surround Reciev

I have read almost everything but CANT FIGURE THIS OUT, PLEASE HELP ME OUT HERE :-)
My PCI Sound Blaster X-Fi Xtreme Audio is conected to my Sony DTS/DD Reci'ver using a Mini Jack to Toslink cabel connected in the blue Digital Out minijack on the sound card and to my Optical?Toslink input on my reciever.
I have enabled SPDIF out / Digital Output Only
I have tried whit and whitout the Bit-Matched
I have treied the different sampling rates 44, - 96 KHz
I have tried playing from MS Media Player and DivX player. (dvd, mp3, radio li've, nett tv)
Im using Vistax32
I believe i have the correct settings and the correct cabel, but cant get no digital sound out, whats wrong?
First I tought I neede the Digital I/O module from Creativ, but I have read that this is?NOT necessary.
PLEASE ANY THING THAT CAN HELP ME SOLVE THIS WOULD MAKE ME REALLY HAPPY :-)

YOU DONT NEED THE I/O accesory, or rather it is not essential. (unless your reciever only has digital optical(toslink) in?My experiment worked! alss ya need to connect from the sound cards digital out to your recievers coax digital audio?in is: "mono" mini (/8 inch) male to rca style male coax cable. you may have to choose digital only and somy other tricks from a given creative software(?they vary)?and or select the correct input for a given reciever....my Harman Kardon avr 00?and avr 300 series?are particularly tricky. Got pandora one up and running. Devo sounds good!
Movies tonight via Netflix streaming.....YAY!

Sound Blaster Live! 24 "no audio device" no so

Similar Messages

Maybe you are looking for