Sound Blaster Live 24bit External - No B

I am hoping that someone can help me here. I am running Windows Vista Ultimate and have my PC setup purely as a Media Center machine. It has an onboard Intel 5. Sound Card that was producing average sound, but works 00%?I have since installed my Li've 24bit External, I first ran the CD and then realised that it was not Vista software so I downloaded the updated drivers and software. First I removed the old software and then installed the newer version. Now everything seems to work and when I test all the speakers via the?drivers / control panel?they all work - including the sub. When playing anything via Media Center or Media player, I get no bass what so ever. - I have even tried 5. DTS DVDs?I have subsequently plugged the speakers back into the onboard card and the sub works. Any suggestions?Thanks in advance.

Yes, it will work. It'll wind up setting your USB ports to 6 bit by default, because it's going to be taking alot out of them, but it'll give you some beefy surround sound none the less. On the down side of this external card though, it's giving me a ton of **bleep** about ventrilo and fra
ps.
:/About to make another topic pretaining to that ina few though.

Similar Messages

Sound Blaster Live 24bit External (5.1) Mic-In / Line-In prob

Hey, here's my setup:
Virtual DJ Console Edition (3.4. updated)
Hercules MP3 Console
Creative Sound Blaster Li've 24bit external (5. card, using it as a 4. to get FRONT out to speakers and REAR as headphone queue)
I need to broadcast using Shoutcast (the VirtualDJ internal broadcasting plugin wont allow to set up full details that SHOUTcast plugin for Winamp allows you to fill in.... i.e. Yellow pages etc etc)
The problem is basically that when I'm using SHOUTcast for Winamp, it streams both my FRONT and REAR outputs, can't seem to choose for it to stream only FRONT...
Now, I know I can send the FRONT to Line-in (and use a stereo Y splitter to get the sound also to my speakers), but then it seems my Sound Blaster li've disables my Mic-In... seems that it has shared Line-In and Mic-In even though they are separate holes in the box....
so basically wondering if anyones got any suggestions as to how to be able to Broadcast only the FRONT output and use the Microphone... now it seems its either I can't use the Microphone when doing a radio show... or alternati'vely I can't use my headphone queue...
I don't understand why would the card have a separate Line-In and Mic-In, but you can't use the Mic-In if you have something hooked in the Line-In? Could there be some software or driver update I could get to be able to do this? Or am I just having forced to buy something like an M-Audio card thats exactly the same, but doesnt share the Mic and Line-ins but lets you use both at the same time?
Thanks for any suggestions! They are most welcome!

at drivers?
IF you mean those third part yASIO drivers they limit to 6 bit recording whic hisn't an issue wuth Acid pro, it's the bandwith and asio offset. DO you ahve a link?

Sound Blaster Live 24bit External

Would a Sound Blaster Li've 24bit External work as a soundcard for my Logitech X-530 5. system? I'm looking for something to upgrade my crappy intergrated soundcard.

Yes, it will work. It'll wind up setting your USB ports to 6 bit by default, because it's going to be taking alot out of them, but it'll give you some beefy surround sound none the less. On the down side of this external card though, it's giving me a ton of **bleep** about ventrilo and fra
ps.
:/About to make another topic pretaining to that ina few though.

Can Sound Blaster live 24bits external work at usb2

hello!
my pc work with usb2.0 and i would like to know to now if usb. connection of sound blaster li've 24bits, can work at 2.0 or, if there are any update that make it work at 2.0?
i would appreciate a answer.
thank you.Message Edited by jhonyy00 on 2--2005 09:02 AM

i appreciate the answer <SPAN class=title_big>Leekay07 , but even so, i?m making some music with FL STUDIO ; and plug-ins like AMPLITUBE; DSOUND and also recording guitar in real time with some effects.
In favour of quality sound and protection to the speakers it is not necessary a fast connection than usb .
does not usb . connection lose speed to transfer data for the purpose i describe, comparing to PCI card?
My pc has AMD athlon processor at 2.8Ghz and 768Mb of RAM and logitech X-530 5. speakers.
Thank you very mutch.Message Edited by jhonyy00 on 2-4-2005 09:3 AM

Connecting a mixer to sound blaster: live 24bit externa

Iv got some dj decks, and wanted to record my mixes to my laptop, so i saw the external sound blaster li've and thought that would do the trick. But it turns out that it is alot more complicated than?i thought. First of all, it took me ato install everythnig without something going wrong, but all the driver (for vista) seem to be ok now. Once installed, i connected a 3.5mm jack into the line in, on the soundblaster, and conncected the other end to my mixer. That all done, i went onto the recording programme that you get with the sb, but here is where it goes wrong the message 'there is no audio device on the system, the application will now close' comes up. Of course this stops me getting onto any of the programmes, and stops me from recording. After this i checked on control panel/device manager, and it said that everything was working correctly, but on another page it says 'cannot find hardware connected' although the blue power light is on. I have now run out of ideas of what to do, so any help would be great.

Iv got some dj decks, and wanted to record my mixes to my laptop, so i saw the external sound blaster li've and thought that would do the trick. But it turns out that it is alot more complicated than?i thought. First of all, it took me ato install everythnig without something going wrong, but all the driver (for vista) seem to be ok now. Once installed, i connected a 3.5mm jack into the line in, on the soundblaster, and conncected the other end to my mixer. That all done, i went onto the recording programme that you get with the sb, but here is where it goes wrong the message 'there is no audio device on the system, the application will now close' comes up. Of course this stops me getting onto any of the programmes, and stops me from recording. After this i checked on control panel/device manager, and it said that everything was working correctly, but on another page it says 'cannot find hardware connected' although the blue power light is on. I have now run out of ideas of what to do, so any help would be great.

Sound Blaster Live! External ...Where is my softwa

I use the CD to install the drivers...ok.
I use the CD to install the software...ok.
I go to configure the speakers start/programs/creative/sound blaster li've! external 24 bit/ EMPTY!
Yeah...so I uninstall..and do it again. Nothing. So now my 5. system, is a piece of crap 2 speaker (un-configrued) waste.
Support? Nothing on the site that can help. Cant even download the setup from the site.
Any suggestions?

?Hi Pudi,
MS USB audio class driver is the driver that gets loaded for any USB audio device by default if you did not install any drivers that is provided by the vendor (in this case, Creative). To try this, you can do a full uninstallation of creative software for the Sound Blaster Li've External 24bit, then connect the hardware to your laptop again after that. The driver that will be loaded at this time would be the MS USB audio class driver. If you know how to look at driver publisher in device manager for the Sound Blaster Li've External 24bit, then you can also check that the publisher of the driver is Microsoft and not Creative if everything goes well.
Once you managed to do this, if you still have the same problem, then I would think that it is a compatibility problem with your laptop. For such cases, you can try to use a self-power USB hub in between the sound card and your laptop. This might help.

Sound blaster live 24bit full volume buzzing soun

hello ,??i just recently bought sound blaster li've 24bit, i have got 2.0 alteclansing VS220 speakers(no subwoofer), wanted to ask when i turn my speakers to medium volume ok no buzz , no problems but when i turn it to max. loud buzz comes from speakers, is it my speakers or is it the sound card signal to strenght ratio thing i don't know help me out.

Type in run " msconfig" and look for the startup item for the app, in your case?CTsysvol . Place a check in the box next to it.
Also type in run "services.msc" scroll down and enure that anything for Creative is set to Auto.
Try that and see how ya go.
Message Edited by xmn on 03-29-2006:55 PM

Sound blaster live 24bit icon prob

hi, i have a problem with trying to keep the sound blaster volume icon on the task bar. i am running windows xp. does anyone else have this problem or know if there is a fix for it. it is called ctsysvol i believe. any help would be appreciated. thanks

Type in run " msconfig" and look for the startup item for the app, in your case?CTsysvol . Place a check in the box next to it.
Also type in run "services.msc" scroll down and enure that anything for Creative is set to Auto.
Try that and see how ya go.
Message Edited by xmn on 03-29-2006:55 PM

Sound Blaster Live! External Questi

Im planning to buy one for my 5. speakers that arent being used at all (im on a laptop). I also want to buy it so that i can use my PS2 with my 5. speakers. I know that the SBL!e has an Optical Jack. Will i be able to plug in my PS2 through its Optical Jack to the Sound Blaster Li've! optical jack? or if i use its Line-In, will i get use of my speakers(in surround sound, or etc,)? and advice will help.

er a dell latitue D60

Sound Blaster live 24bit....no sound cant figure out why NEED HELP th

Ok....my sound worked on my computer before i installed windows xp.....my computer is a gateway pentium 3 600mhz with 28 mg ram.....it use to have windows 98 2nd edition...then formated the harddri've and installed xp pro...and since then i havent had sound....i was told by someone that i should upgrade the soundcard so i bought the soundblaster li've 24 bit and installed it and the software.....and i ran diagnostics and it says everything is fine...but still have no sound im not getting any help though the troubleshooting..... IF ANYONE CAN HELP I WOULD APPRECIATE IT
THANKS

beyondspecs,
Ensure that 'Digital Output Only' option has not been enabled in Creative Speaker Setting if you are using analog speaker.
You can test your audio card with a pair of headphones. Unplug your speakers from the sound card, and plug a pair of headphones to the Line-Out jack, and test audio output from your sound card. To complete the test, be sure test each individual Line-Out jacks. Use the application Creative Speaker Setting 'Channel' option to do the test.
Jason

Creative Sound Blaster Live 24bit Onboard au

Hello all,
A few days ago before I reformatted, my audio began to act up. It would all of a sudden quit playing sound period. I thought it was probably my own fault, but after a reformat and a clean installation of sound drivers, it still doesn't work. I have tried everything in my own power to figure this out. The computer recognizes that everything is working properly, but I can't get any sound out of my headphones or speakers. Nothing is muted either.
Any help would be appreciated. Is there any way that I can check to make sure my onboard sound hasn't died on me?

Hello all,
A few days ago before I reformatted, my audio began to act up. It would all of a sudden quit playing sound period. I thought it was probably my own fault, but after a reformat and a clean installation of sound drivers, it still doesn't work. I have tried everything in my own power to figure this out. The computer recognizes that everything is working properly, but I can't get any sound out of my headphones or speakers. Nothing is muted either.
Any help would be appreciated. Is there any way that I can check to make sure my onboard sound hasn't died on me?

Sound Blaster Live External 24bit vs. Compaq 6735b

Hello guys,
I recently bought a new laptot Compaq 6735b with Vista installed on it. I dont like Vista so I installed my original XP home OS. When I connect my usb SB Li've external to it,? the sound crackles. I already tried updating all the drivers, but nothing heplped.
Do you have any idea that could help. I would be very grateful because I am going to DJ on my niece wedding and it has to be solved... Thank you in advance
Pudi

?Hi Pudi,
MS USB audio class driver is the driver that gets loaded for any USB audio device by default if you did not install any drivers that is provided by the vendor (in this case, Creative). To try this, you can do a full uninstallation of creative software for the Sound Blaster Li've External 24bit, then connect the hardware to your laptop again after that. The driver that will be loaded at this time would be the MS USB audio class driver. If you know how to look at driver publisher in device manager for the Sound Blaster Li've External 24bit, then you can also check that the publisher of the driver is Microsoft and not Creative if everything goes well.
Once you managed to do this, if you still have the same problem, then I would think that it is a compatibility problem with your laptop. For such cases, you can try to use a self-power USB hub in between the sound card and your laptop. This might help.

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

First off your operating system version is obsolete and not being updated for security issues from Apple.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
So at least you need to upgrade to 10.6.8, and that will make your machine secure again.
However if you decide to upgrade further to 10.7 or 10.8, be forewarned your PPC based software of old is not going to work any longer. and your machine may require more RAM.
Check here to see and download the free MacTracker to see your machines true RAM potential and specs. There are videos online at YouTube, it's really easy to install yourself.
http://roaringapps.com/apps:table
I checked out the z-5500, apprantly the optical out shouldn't be a problem, however the surround sound decoding is a problem as the Mac doesn't do it, just passes it through for decoding on a receiver via the optical out port if your Mac has one.
Use the free MacTracker to find out or when you upgrade OS X, there is a option in the System Preferences > Sound.
https://logitech-en-ap.custhelp.com/app/answers/detail/a_id/9693/section/trouble shoot/crid/409/lt_product_id/224/tabs/1,3,2,4,5/cl/sg,en
The Sound Blaster Live 24 bit doesn't do Dolby 5.1 according to Wikipedia. More info on it is here.
http://support.creative.com/Products/ProductDetails.aspx?catID=1&prodID=10702&pr odName=Live!%2024-bit%20External&CatName=Sound+Blaster
If it's able to accept optical toslink cable from the Mac's toslink stereo mini port (if it has optical output) and then send that to the z-5500 via the analog speakers, then you should be fine.
I'm afraid you'll have to do some more digging to get it to work.
The only surround sound your going to get is by playing DVD movies that have it, then it can't have Dolby 5.1 as the Live 24 bit can't decode it.
So do your research on what surround sound formats the Live 24 can decode, then compare your DVD collection for those movies that have it, then get it all connected and enable it on the movie preferences at the menu.
Good Luck

Sound Blaster Live 5.1 - SF1 damaged.

houk
Yesterday I've found on my SBLi've5. that subassembly signed as SF (near MID/Gameport) is corrupted (looks like burned out).. Is this little one correspond with using an eventual midi keyboard od game controller? What kind of component is that? Resistor? Or something else? If this thing is important for communication through MIDI/Gameport, and if yes - could it be repaired by changing invalid component?

Originally Posted by dogweed
I lost my install disk for my sound blaster live 5.1 model SBO 100 for windows 98se. I cant seem to find drivers on creative's web site that will work with my card. Any one know where I can get them.
Here:
http://ccftp.creative.com/manualdn/D...BL51_W9xME.exe
Creative Surround Mixer (Windows 95, 98, and Millennium)
Creative AudioHQ (Windows 95, 98, and Millennium)
Creative Installer 1.00.07 (Windows 95, 98, and Millennium)
here:
http://www.vogonsdrivers.com/index.php?catid=3
or here:
http://www.touslesdrivers.com/index....ge=12&v_code=4
Next time please use 'uncle google'...

BA7500G + Sound Blaster Live! 24-bit + Windows 2k = no sound

Similar to the thread for Win XP, I have inherited a BA7500g speaker system, and purchased a new Sound Blaster Live! 24-bit card for my Win2k system. Cannot get the speakers to work, although the speaker test works from the BA control unit. Noticed the digital audio input cable is color coded, and I don't have the original card that matches this scheme. Could this be the problem?

I have installed a new (not used) Soundblaster Audigy SE and BA7500G speakers and I'm running XP Pro. I'm getting no sound even when I change to Digital Out only? Not sure what to do? Is this sound card not compatible with my speakers? Do I need to purchase the Digital I/O Module that Creative is currently not in stock? I can find the Digital I/O module on Ebay if need be but not sure that's the solution. Please help!
Thanks,
Kevin

Sound Blaster Live 24bit External - No B

Similar Messages

Maybe you are looking for