Sound Blaster live 24bit....no sound cant figure out why NEED HELP th

Ok....my sound worked on my computer before i installed windows xp.....my computer is a gateway pentium 3 600mhz with 28 mg ram.....it use to have windows 98 2nd edition...then formated the harddri've and installed xp pro...and since then i havent had sound....i was told by someone that i should upgrade the soundcard so i bought the soundblaster li've 24 bit and installed it and the software.....and i ran diagnostics and it says everything is fine...but still have no sound im not getting any help though the troubleshooting..... IF ANYONE CAN HELP I WOULD APPRECIATE IT
THANKS

beyondspecs,
Ensure that 'Digital Output Only' option has not been enabled in Creative Speaker Setting if you are using analog speaker.
You can test your audio card with a pair of headphones. Unplug your speakers from the sound card, and plug a pair of headphones to the Line-Out jack, and test audio output from your sound card. To complete the test, be sure test each individual Line-Out jacks. Use the application Creative Speaker Setting 'Channel' option to do the test.
Jason

Similar Messages

My time machine doesnt show up in the finder and ive done the checkboxes in the finder preferences and ive restarted in safeboot. i still cant figure out why it wont show up

my time machine doesnt show up in the finder and ive done the checkboxes in the finder preferences and ive restarted in safeboot. i still cant figure out why it wont show up

iOS: Device not recognized in iTunes for Windows

My desk top Calender and My IPhone products have stopped communicating. even during hard wire sync. I cant figure out why..?

My desk top Calender and My IPhone products have stopped communicating. even during hard wire sync. I cant figure out why..?

Hi,
Try resetting your Sync Services. See here to reset your sync services.
Let us know how it goes.
Best wishes
John M

Right after the firefox upgrade I can no longer acess my text window in my yahoo mail account. I cant figure out why.

Once firefox completed its upgrade I can no longer access my text window/box in my yahoo mail account. Which means I cannot text from my mail account now. I cant figure out why this is happening.

Once firefox completed its upgrade I can no longer access my text window/box in my yahoo mail account. Which means I cannot text from my mail account now. I cant figure out why this is happening.

SQL JSTL displat y the count .. cant figure out how please help......

Hi all,
I facing a problem in displaying the count total.. My situation is that I run below query ..
<sql:query var="jobs" dataSource="jdbc/test">
 SELECT COUNT(*) FROM applications where employerid = '12345610' GROUP BY job_id
 </sql:query>
 <c:forEach var="row" items="${jobs.rows}">
 <li> Count [<c:out value="${row.??? )}]</li>
 </c:forEach>
{code}
when I run the same sql in sql prompt it gives me 10 groups with relevant counts.
but I cant figure out how to do the same using JSTL sql. in simple terms I want to display the count of each logical group ? I have tried all I can wit my little knowledge on the subject..
I will appreciate if someone could help me out please..
Million Thanks in advance.

I found the answer my self... It took me just a 4 sleep to find the answer ,,, a break and a coup of coffee did the job
I chanced the code as below
SELECT COUNT(*) as cnt FROM applications where employerid = '12345610' GROUP BY job_id
 </sql:query>
 <c:forEach var="row" items="${jobs.rows}">
 <li><a href="/test/servlet/Controller?param=Security">Security </a>[<c:out value="${row.cnt }"/>]</li>

Can Sound Blaster live 24bits external work at usb2

hello!
my pc work with usb2.0 and i would like to know to now if usb. connection of sound blaster li've 24bits, can work at 2.0 or, if there are any update that make it work at 2.0?
i would appreciate a answer.
thank you.Message Edited by jhonyy00 on 2--2005 09:02 AM

i appreciate the answer Leekay07 , but even so, i?m making some music with FL STUDIO ; and plug-ins like AMPLITUBE; DSOUND and also recording guitar in real time with some effects.
In favour of quality sound and protection to the speakers it is not necessary a fast connection than usb .
does not usb . connection lose speed to transfer data for the purpose i describe, comparing to PCI card?
My pc has AMD athlon processor at 2.8Ghz and 768Mb of RAM and logitech X-530 5. speakers.
Thank you very mutch.Message Edited by jhonyy00 on 2-4-2005 09:3 AM

Sound blaster live 24bit full volume buzzing soun

hello ,??i just recently bought sound blaster li've 24bit, i have got 2.0 alteclansing VS220 speakers(no subwoofer), wanted to ask when i turn my speakers to medium volume ok no buzz , no problems but when i turn it to max. loud buzz comes from speakers, is it my speakers or is it the sound card signal to strenght ratio thing i don't know help me out.

Type in run " msconfig" and look for the startup item for the app, in your case?CTsysvol . Place a check in the box next to it.
Also type in run "services.msc" scroll down and enure that anything for Creative is set to Auto.
Try that and see how ya go.
Message Edited by xmn on 03-29-2006:55 PM

Sound Blaster Live 24bit External (5.1) Mic-In / Line-In prob

Hey, here's my setup:
Virtual DJ Console Edition (3.4. updated)
Hercules MP3 Console
Creative Sound Blaster Li've 24bit external (5. card, using it as a 4. to get FRONT out to speakers and REAR as headphone queue)
I need to broadcast using Shoutcast (the VirtualDJ internal broadcasting plugin wont allow to set up full details that SHOUTcast plugin for Winamp allows you to fill in.... i.e. Yellow pages etc etc)
The problem is basically that when I'm using SHOUTcast for Winamp, it streams both my FRONT and REAR outputs, can't seem to choose for it to stream only FRONT...
Now, I know I can send the FRONT to Line-in (and use a stereo Y splitter to get the sound also to my speakers), but then it seems my Sound Blaster li've disables my Mic-In... seems that it has shared Line-In and Mic-In even though they are separate holes in the box....
so basically wondering if anyones got any suggestions as to how to be able to Broadcast only the FRONT output and use the Microphone... now it seems its either I can't use the Microphone when doing a radio show... or alternati'vely I can't use my headphone queue...
I don't understand why would the card have a separate Line-In and Mic-In, but you can't use the Mic-In if you have something hooked in the Line-In? Could there be some software or driver update I could get to be able to do this? Or am I just having forced to buy something like an M-Audio card thats exactly the same, but doesnt share the Mic and Line-ins but lets you use both at the same time?
Thanks for any suggestions! They are most welcome!

at drivers?
IF you mean those third part yASIO drivers they limit to 6 bit recording whic hisn't an issue wuth Acid pro, it's the bandwith and asio offset. DO you ahve a link?

Sound Blaster Live 24bit External

Would a Sound Blaster Li've 24bit External work as a soundcard for my Logitech X-530 5. system? I'm looking for something to upgrade my crappy intergrated soundcard.

Yes, it will work. It'll wind up setting your USB ports to 6 bit by default, because it's going to be taking alot out of them, but it'll give you some beefy surround sound none the less. On the down side of this external card though, it's giving me a ton of **bleep** about ventrilo and fra
ps.
:/About to make another topic pretaining to that ina few though.

Sound blaster live 24bit icon prob

hi, i have a problem with trying to keep the sound blaster volume icon on the task bar. i am running windows xp. does anyone else have this problem or know if there is a fix for it. it is called ctsysvol i believe. any help would be appreciated. thanks

Type in run " msconfig" and look for the startup item for the app, in your case?CTsysvol . Place a check in the box next to it.
Also type in run "services.msc" scroll down and enure that anything for Creative is set to Auto.
Try that and see how ya go.
Message Edited by xmn on 03-29-2006:55 PM

Connecting a mixer to sound blaster: live 24bit externa

Iv got some dj decks, and wanted to record my mixes to my laptop, so i saw the external sound blaster li've and thought that would do the trick. But it turns out that it is alot more complicated than?i thought. First of all, it took me ato install everythnig without something going wrong, but all the driver (for vista) seem to be ok now. Once installed, i connected a 3.5mm jack into the line in, on the soundblaster, and conncected the other end to my mixer. That all done, i went onto the recording programme that you get with the sb, but here is where it goes wrong the message 'there is no audio device on the system, the application will now close' comes up. Of course this stops me getting onto any of the programmes, and stops me from recording. After this i checked on control panel/device manager, and it said that everything was working correctly, but on another page it says 'cannot find hardware connected' although the blue power light is on. I have now run out of ideas of what to do, so any help would be great.

Iv got some dj decks, and wanted to record my mixes to my laptop, so i saw the external sound blaster li've and thought that would do the trick. But it turns out that it is alot more complicated than?i thought. First of all, it took me ato install everythnig without something going wrong, but all the driver (for vista) seem to be ok now. Once installed, i connected a 3.5mm jack into the line in, on the soundblaster, and conncected the other end to my mixer. That all done, i went onto the recording programme that you get with the sb, but here is where it goes wrong the message 'there is no audio device on the system, the application will now close' comes up. Of course this stops me getting onto any of the programmes, and stops me from recording. After this i checked on control panel/device manager, and it said that everything was working correctly, but on another page it says 'cannot find hardware connected' although the blue power light is on. I have now run out of ideas of what to do, so any help would be great.

Sound Blaster Live 5.1 , Sound Not WOrking in Windows A

Hi,
I am having a problem with my Sound Blaster Li've 5. , I get sound in applications like Media player or games but in windows xp itself I get nothing. I go to the sounds tab in the the control panel and its like it does not see the sound card, the little play button next to each windows sound is not lit. I have ininstalled the card, taken it out rebooted:angry: and reinstalled with no success..any sugestions?
thanks in advance

i guess you're using WindowsXP, huh? well, im using Win2000P. once my Life! wasnt properly recognized by windows too, so i checked for any old soundriver files. then i installed the card manually with the hardware assistant.
after that i could install the livedriverunipack from creative, and everything was fine. but of course windows should detect that card without that procedure! maybe you give it a try. (btw, dont play the with the IRQs)

Sound Blaster Live! Value Sound Card Driver for

Hi, I have an older sound card that I purchased in 200: Sound Blaster Li've! Value Sound Card. The website doesn't seem to have the driver for this specific model. I'm looking for an Windows XP driver. Can anyone direct me to the right place to download this?

http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+XP&region=&Product_Na me=Li've%2&Product_ID=4857&modelnumber=&driverlang =033&OS=0&drivertype=0&x=24&y=3
They really should make the "Search archi'ves" link on this page,
http://us.creative.com/support/downloads/welcome.asp?action=next
bright red and about six inches high.

My podcast isn't updating and I can't figure out why, please help?

Hi everyone,
I'm at my wits end and I can't figure out what's wrong with my podcast in regards to iTunes.
We have a website we update that originally iTunes was pointed at (http://www.whydaddydrinks.net/?feed=rss2) and then iTunes started having issues with not updating. Recently we tried changing the feed of the podcast to the RSS feed for our podcast hosting account at Podbean (http://whydaddydrinks.podbean.com/feed/) and it's running into the same issue.
I've checked FeedValidator for both feeds and they're fine (http://feedvalidator.org/check.cgi?url=http%3A%2F%2Fwww.whydaddydrinks.net%2F%3F feed%3Drss2 and http://feedvalidator.org/check.cgi?url=http%3A%2F%2Fwhydaddydrinks.podbean.com%2 Ffeed%2F). I've clicked the links to the .mp3 files and they play off the web, so, in theory, there shouldn't be any issue as far as I know; Episode 13 shows up in iTunes but dosn't appear to be connected to the file and Season 2 Episode 1 doesn't show up at all.
Can any of you offer any suggestions as to what the heck is going on?

Your Store page is at https://itunes.apple.com/gb/podcast/your-book-is-why-daddy-drinks/id515363310?mt =2
This is using the feed at http://www.whydaddydrinks.net/?feed=rss2 so the other feed URL you posted is irrelevant.
This feed has episodes up to 13 which contain playable media, and these all show in the Store and when subscribing. However the URL for the media file for episode 13 is
http://media40.podbean.com/pb/89ea6f327345e33833ff09885e48b8a1/50e904db/data2/bl ogs48/462271/uploads/YBIWDD_Episode13.mp3
and there is no file at this address. The previous episode downloads OK.
This feed contains two later episodes but neither has an 'enclosure' tag containing the URL of a media file and so the episodes don't show in iTunes. You are using WordPress to make your feed, and this problem arises a lot - it presumably means that you have failed to do something you need to do in WordPress to get the media file into the feed, but I can't advise on specifics of WordPress.
The other feed has one of these two episodes, and there the latest episode does have an 'enclosure' tag and the episode appears when subscribing manually; however as I say this feed is not in use by the Store.
So you need to do with the original feed whatever it was you did with the new feed to get the episode into the Store, and you need to chase the missing media file for episode 13.
If you want to move the Store to using the Podbean feed you need to follow the procedure outlined here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
Note that the title in the Podbean feed is 'whydaddydrinks' which many not be what you want.

Sound Blaster Live 24bit External - No B

I am hoping that someone can help me here. I am running Windows Vista Ultimate and have my PC setup purely as a Media Center machine. It has an onboard Intel 5. Sound Card that was producing average sound, but works 00%?I have since installed my Li've 24bit External, I first ran the CD and then realised that it was not Vista software so I downloaded the updated drivers and software. First I removed the old software and then installed the newer version. Now everything seems to work and when I test all the speakers via the?drivers / control panel?they all work - including the sub. When playing anything via Media Center or Media player, I get no bass what so ever. - I have even tried 5. DTS DVDs?I have subsequently plugged the speakers back into the onboard card and the sub works. Any suggestions?Thanks in advance.

Yes, it will work. It'll wind up setting your USB ports to 6 bit by default, because it's going to be taking alot out of them, but it'll give you some beefy surround sound none the less. On the down side of this external card though, it's giving me a ton of **bleep** about ventrilo and fra
ps.
:/About to make another topic pretaining to that ina few though.

Sound Blaster live 24bit....no sound cant figure out why NEED HELP th

Similar Messages

Maybe you are looking for