Sound blaster live 5.1 digital drive

I bought this from newegg model no. SB0220 sn. MSB02243440746S and can not find drivers?

Race30,
I would try the Li'veDrvUniPack download from out website. Go to:
http://us.creative.com/support/downloads
and in the search box type in Li'veDrvUni and it should take you to the 23.3 MB file you need. If this card is OEM these drivers may not install however it is worth a try. If this doesn't work you may want to contact NewEgg to obtain a driver CD from them.
Jeremy

Similar Messages

  • My Sound Blaster Live 5.1 Digital won't work with Vista

    First off, I wasn't sure whether to put this in the vista or Sound Blaster form so sorry if this is the wrong place.
    Anyways. I got a new computer two days ago and just installed my old Sound Blaster li've 5. Digital (model SB0220) card into the new desktop. Vista, the operating system I'm using now tried to find the drivers but failed. Then I tried looking them up on the creative site with the drop down lists but it didn't pull up anything either.
    I plan on buying an m-audio 2496 sound card soon but for now I would like to get back to recording and the Sound Blaster card is much better than the stock motherboard audio setup.
    If anyone knows of any drivers for this card it would be extremely helpful.
    ThanksMessage Edited by 85Dave on 07-0-200707:22 AM

    hmm...thanks.
    Well its not that bad really. sound blaster cards are not made for recording audio and so I was going to get the m-audio 2496 card anyways.
    I'm just waiting for drivers on that which are supposed to come some time in the 2nd half of 2007.
    Thanks for the info.

  • Issue with Sound Blaster Live! 24-bit driver

    ,Issue with Sound Blaster Li've! 24-bit driverw Hello, I have a 2004 Dell Dimension DIM900 and a couple months ago it began making a loud crackling noise sporadically. It sounds like real ear-piercing static, like when a microphone is being plugged in, only in short random bursts at alternating pitches so I originally thought my speakers were blown. I turned them off and decided to use a headphone set only to hear the same annoying sound.
    I looked in the sound settings and read that I have a Sound Blaster 24-bit internal driver in my system, assuming that information is correct.
    What can I do? I did the search and read the read on those X-Fi drivers that had a similar problem, but I didn't know if that was the same as this because the thread concluded that their problem was exclusi've to systems with Nvidia dual SLI graphic configurations and X-Fi drivers. ? Any input would be appreciated, thanks!

    Hi IT5,
    May I know if this Li've! 24bit came pre-installed on your Dell computer or did you purchase & install the sound card separately?

  • Creative Sound Blaster Live 5.1 Digital and Vi

    Hi, I have Creative Sound Blaster Li've 5. Digital in my computer. I recently clean installed Windows Vista. Everything went fine, its been few months now everything was fine. But for the past few days my Vista computer is showing a blue screen on startup and will allow me to boot in Safe mode only with following error:
    <p class="clsPTitle">Download updates for Creative Sound Blaster Li've 5. Digital
    <p class="clsPTitle">?
    This problem was caused by Creative Sound Blaster Li've 5. Digital,
    which was created by Creative Technology Ltd.
    Solution
    To solve this problem, follow these steps:
    Go online to the following website:
    <img alt="[/img] src="http://wer.microsoft.com/Responses/include/images/arrow.gif">[color="#3a8e6">Creative Technology Ltd
    <
    Find SBL5DL_PCPatch_LB_3.exe, and then install it.
    <
    I downloaded above EXE file from creative web site and tried but it says File does not support Vista.
    Can anyone please Help!!!
    Idrees Adam

    The front panel connections you want to use are adapted to be connected to a motherboard with audio included, NOT to a PCI audio card. You'll have to connect the front panel wires to your motherboard's audio connnector.
    Greetings.
    El At?n

  • I need help with Sound Blaster Live 5.1 Digital

    ...because I cannot install it. I formated my Windows XP and since then my Audio Card isn't working because my PC hasn't auto-installed it like everything other. The bad news are that I have lost my installing cd and I don't know what to do... Please...heeeelp!!!

    Have you try using the Li'veDrvUni driver?
    Jason

  • GDriver of Sound Blaster Live! 5.1 Digital (Model: SB0220) for Windows 7

    My Sound Blaster Live! 5. Digital cannot work after Windows 7 is installed. Is driver for Windows 7 available? If not, any alternati'ves? My multimedia speaker is Boston "Digital BA735" which is used to work with the digaital output the this sound card under Windows XP.

    Try kxproject site for driver

  • Definitive Vista Driver for Sound Blaster Live!

    Is there a "definitive" 3rd party driver solution for the Soun Blaster Live! 5. (including Dell Digital version) that enables all features including the digital out If no one agrees on a single solution can we get a list of options here. Here is what I have seen so far http://forums.creative.com/creativel...ssage.id=23567 http://forums.creative.com/creativel...scending&page= http://www.aeonity.com/david/creativ...vista-download Sound Blaster Live! - LiveDrvUni-Pack (English) KX project driver Anything else Which is best Anything new

    Download Sound Blaster CD ISO?s:
    http://hosted.filefront.com/BadBoyforum
    Creative Li've! 5. Digital Drivers:
    http://es.europe.creative.com/support/downloads/welcome.asp?bEOSLAgree=yes&action=next&sOSName=&re gion=3&MainCategory=266&Product_Name=Li've%2+5%2E+ Digital&Product_ID=853&modelnumber=
    Message Edited by Rad-Wulf on 07-27-200709:28 PM

  • Windows 7 vs Sound Blaster Live! Digital - Support Please !!!!

    Hello, i recently installed windows 7 and love the new look, but new looks mean nothing when you got no sound lol!, i've had the sound Blaster Li've! Digital for a while and i've looked everywhere for a driver to get my sound card working on windows 7 and still have no luck with doing so ......
    If anyone could post a working driver for sound blaster li've!?digital? (windows 7 32 bit compatibility) I WOULD APPRECIATE IT
    Hopefully this could be sticked with a good solution for other people struggling with this anoying problem thx !!!

    I About the only thing you're going to find for drivers for that old card is this,
    http://forums.creative.com/creativel...hread.id=40948
    as Creative will never release Windows 7 drivers for it.

  • New Driver Creative Sound Blaster Live! 24-bit 1.04.0050 WHQL For Windows x64

    This is the new  Official Audio driver  released by Creative for  Sound Blaster Live! 24-bit for Windows x64.
    You can not install this driver in your MSI nForce4 based boards without first applying the OnBoard Sound EEPROM fix first found  here
    You have to boot in win98 or  winMe using a boot diskette in order to run the fix.
    enjoy 
    Markoul

    Quote from: Markoul on 22-May-05, 00:07:32
    This is the new  Official Audio driver  released by Creative for  Sound Blaster Live! 24-bit for Windows x64.
    You can not install this driver in your MSI nForce4 based boards without first applying the OnBoard Sound EEPROM fix first found  here
    You have to boot in win98 or  winMe using a boot diskette in order to run the fix.
    enjoy 
    Markoul
    Have you actually tired it yourself?  I'm wondering if this is a workaround, or will this be the official solution.  I wouldn't mind trying it, but I don't want to mess it up for when the Official driver is released.

  • Sound Blaster Live! Platinum 5.1 and DTT2500 5.1

    Hello!
    I have a Sound Blaster Live! Platinum 5.1 and a Cambridge Soundworks DTT2500 5.1 Digital Sound System.
    I linked them with with the SPDIF-Out on the Live! Drive.
    First i thought it works but then i realized that there is only sound from the 2 front and the center speakers. There is no Signal on the Sorround Speakers.
    When i do the sound test in the sorround mixer, only the left and the right front speakers work.
    Do i have to link it with this 9 pin digital din cable? But i don't have such and don't know where to get.
    Can you help me?
    How do i have to link this devices?

    You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

  • BA7500G + Sound Blaster Live! 24-bit + Windows 2k = no sound

    Similar to the thread for Win XP, I have inherited a BA7500g speaker system, and purchased a new Sound Blaster Live! 24-bit card for my Win2k system. Cannot get the speakers to work, although the speaker test works from the BA control unit. Noticed the digital audio input cable is color coded, and I don't have the original card that matches this scheme. Could this be the problem?

    I have installed a new (not used) Soundblaster Audigy SE and BA7500G speakers and I'm running XP Pro. I'm getting no sound even when I change to Digital Out only? Not sure what to do? Is this sound card not compatible with my speakers? Do I need to purchase the Digital I/O Module that Creative is currently not in stock? I can find the Digital I/O module on Ebay if need be but not sure that's the solution. Please help!
    Thanks,
    Kevin

  • CREATIVE SOUND BLASTER LIVE 5 voice dist

    I have a CREATIVE SOUND BLASTER LIVE 5, I want to know if some?software of Creative labs?exists to distort the voice in real time.Pablo Castillo R.
    http://pablocr.pe.kzMessage Edited by pcr_sof on 06-08-200709:48 PM
    Message Edited by pcr_sof on 06-2-200708:36 PM

    Take a look at the following thread:http://forums.creative.com/creativel...message.id=994?That is the best you can get. Did you run WindowsUpdate to get the drivers installed?If you did, just change the speaker setup to?4 speakers, then check and uncheck the?Digital Output Only checkbox to get sound back.

  • Sbl-soundfonts: soundfont midi lib for sound blaster live

    Something I needed for midi tests of my sound blaster live card.
    The first soundfont file was suggested as the best general soundfont library available for free (8MB). The second is from my sb live install cd (4MB). If you only want the first one remove second source file and second md5sum. You will need asfxload from awesfx package (http://bbs.archlinux.org/viewtopic.php?p=77155) to load the library.
    More info and soundfont libraries are available at:
    http://www.linux.com/howtos/MIDI-HOWTO-10.shtml
    http://www.euronet.nl/~mailme/index4.html
    http://www.synthzone.com/soundfont.htm
    http://alive.singnet.com.sg/musician/
    http://listen.to/sblive
    http://www.indezine.com/products/sound/soundfonts.html
    http://www.soundfont.com/
    http://alsa.opensrc.org/index.php?page=asfxload
    http://alsa.opensrc.org/index.php?page=emu10k1
    http://alsa.opensrc.org/index.php?page= … ntHandling
    pkgname=sbl-soundfonts
    pkgver=1.0
    pkgrel=1
    pkgdesc="SoundFonts files for SoundBlaster Live!"
    url="http://www.creative.com"
    depends=('awesfx')
    source=(http://www.alsa-project.org/~james/sound-fonts/8MBGMSFX.SF2 CT4MGM.SF2)
    md5sums=('568ddfaa56db2bb45fc96e28dcc711ad' '1652dfbefe914bdb8dc03afc0c76f619')
    build() {
    cd $startdir/src
    install -d -m755 $startdir/pkg/usr/share/soundfonts
    install -m644 *.SF2 $startdir/pkg/usr/share/soundfonts

    I recently answered about the same question:
    If you?use Vista or Windows7, then there is no official driver. You can only use alternati've drivers like Vista Support Pack by Daniel_K or the one from KXProject (better). But if you have more than 2 gigs of memory installed or an x64 OS, then both drivers will be half-working (as far as I remember, Daniel's driver won't work with more than 2 Gb of memory installed in any OS, and with KX-driver there will only be a problem with MIDI playback with more than 2 Gb AND x64 Win7).

  • Sound Blaster Live 5.1 - SF1 damaged.

    houk
    Yesterday I've found on my SBLi've5. that subassembly signed as SF (near MID/Gameport) is corrupted (looks like burned out).. Is this little one correspond with using an eventual midi keyboard od game controller? What kind of component is that? Resistor? Or something else? If this thing is important for communication through MIDI/Gameport, and if yes - could it be repaired by changing invalid component?

    Originally Posted by dogweed
    I lost my install disk for my sound blaster live 5.1 model SBO 100 for windows 98se. I cant seem to find drivers on creative's web site that will work with my card. Any one know where I can get them.
    Here:
    http://ccftp.creative.com/manualdn/D...BL51_W9xME.exe
    Creative Surround Mixer (Windows 95, 98, and Millennium)
    Creative AudioHQ (Windows 95, 98, and Millennium)
    Creative Installer 1.00.07 (Windows 95, 98, and Millennium)
    here:
    http://www.vogonsdrivers.com/index.php?catid=3
    or here:
    http://www.touslesdrivers.com/index....ge=12&v_code=4
    Next time please use 'uncle google'...

  • Iso CD Sound Blaster Live 5.1

    Help !!! i need cd iso to my own card creative sound blaster li've 5. digital model number SB0220 serial C6SB0229447004949Y, anyone have link to download iso cd, plz help to share, thx all guys

    SB0229

Maybe you are looking for

  • FIXED ASSET ERROR

    I am using SBO8.81PL6. I am importing fixed asset master data and observing some strange behavior. When uploading fully depreciated assets, all assets are imported successfully but with the same capitalization and Depreciation start date of 30/11/99.

  • Error while deploying the demo

    hi all, this is my FP log file,i got this sql exceptions: ORA-01920: user name 'JMSUSER' conflicts with another user or role name ORA-00955: name is already used by an existing object then atlast the log file shows getESBMetadata: BUILD SUCCESSFUL To

  • XSLT Transformation Question

    Hi together! Hope anybody can help. I have the follow XML structure : <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">¶ <asx:values>¶ <IMPORT>¶ <Y0DPL_LATAM_INV_FILE_UPLOAD>¶ <DATA>222358   1NU    480350    29102007VENDA DE MERCADORIA 

  • Deskjet 5525 Server Connection error 403 - scanning documents

    I cannot scan and send documents/photos to email or computer. It is connected wirelessly to internet, but keeps coming up with Server Connection Error : 403. I have reset to factory settings on the printer, but no change. What do I do, to be able to

  • "Save as... eps" fails after 253 pages

    Hello, Save long pdf as single eps pages fails after 253 pages (osx lion 10.7.5, acrobat pro X) getting error 11. It's a known issue? How to work around? Thanks a lot ps. Acrobat pro 9 works fine exporting all pages