Sound Blaster Live Digital Model# SB0220 sn# m1sb02294580015

Hello, I have seen cd images for download here, but I don't have a clue as to which might work for the above-mentioned card. I really would appreciate some help, as I lost the cd and this issue is driving me insane. I downloaded some software from dell.com, as I have a dell dimension 2400. Like windows before it, the software just said it found no installed cards on my system. All I did was reinstall windows. I didn't think the software would be so hard to find and install. Any help would be much appreciated.

mrfloodsparty wrote:
Hello, I have seen cd images for download here, but I don't have a clue as to which might work for the above-mentioned card. I really would appreciate some help, as I lost the cd and this issue is driving me insane. I downloaded some software from dell.com, as I have a dell dimension 2400. Like windows before it, the software just said it found no installed cards on my system. All I did was reinstall windows. I didn't think the software would be so hard to find and install. Any help would be much appreciated.
The one for SB0229 (msb022945800574u).
jutapaMessage Edited by jutapa on 02-26-20060:48 PM

Similar Messages

  • Drivers needed for Sound Blaster LIVE VALUE - Model 4780

    I had to move my SB Live Value card model 4780 S/N 4780210008722, to another computer and require new drivers for the SB card which has a gaming port.
    I have a 3.0 gig IBM Think Center box using Windows XP SP2.
    I tried the DOWNLOAD area Creative provided but found the information very confusing as to what drivers and patches to download. First it said to download except if I did not have the original installation drivers (which I don't have), but then it says to download the drivers as an upgrade.
    Again, they don't address clearly what I should download for a basic installation which includes use of the game port for use with flying type software. I have 2-3 joysticks consoles i'd like to use on my newer computer using the CT 4780 SB card.

    Look at your Private Messages on the top of the site.

  • GDriver of Sound Blaster Live! 5.1 Digital (Model: SB0220) for Windows 7

    My Sound Blaster Live! 5. Digital cannot work after Windows 7 is installed. Is driver for Windows 7 available? If not, any alternati'ves? My multimedia speaker is Boston "Digital BA735" which is used to work with the digaital output the this sound card under Windows XP.

    Try kxproject site for driver

  • My Sound Blaster Live 5.1 Digital won't work with Vista

    First off, I wasn't sure whether to put this in the vista or Sound Blaster form so sorry if this is the wrong place.
    Anyways. I got a new computer two days ago and just installed my old Sound Blaster li've 5. Digital (model SB0220) card into the new desktop. Vista, the operating system I'm using now tried to find the drivers but failed. Then I tried looking them up on the creative site with the drop down lists but it didn't pull up anything either.
    I plan on buying an m-audio 2496 sound card soon but for now I would like to get back to recording and the Sound Blaster card is much better than the stock motherboard audio setup.
    If anyone knows of any drivers for this card it would be extremely helpful.
    ThanksMessage Edited by 85Dave on 07-0-200707:22 AM

    hmm...thanks.
    Well its not that bad really. sound blaster cards are not made for recording audio and so I was going to get the m-audio 2496 card anyways.
    I'm just waiting for drivers on that which are supposed to come some time in the 2nd half of 2007.
    Thanks for the info.

  • Sound Blaster Live Code Key Model CT4

    Have lost my code key for my Sound Blaster Li've. Would be helpful if someone else has the key if they could share it with me.

    Originally Posted by dogweed
    I lost my install disk for my sound blaster live 5.1 model SBO 100 for windows 98se. I cant seem to find drivers on creative's web site that will work with my card. Any one know where I can get them.
    Here:
    http://ccftp.creative.com/manualdn/D...BL51_W9xME.exe
    Creative Surround Mixer (Windows 95, 98, and Millennium)
    Creative AudioHQ (Windows 95, 98, and Millennium)
    Creative Installer 1.00.07 (Windows 95, 98, and Millennium)
    here:
    http://www.vogonsdrivers.com/index.php?catid=3
    or here:
    http://www.touslesdrivers.com/index....ge=12&v_code=4
    Next time please use 'uncle google'...

  • Sound card driver on windows 7 with Sound Blaster Live - model ct4870

    Hi guy,?
    I search all day just to find the driver for my PC on windows 7. My PC has model is Creative CT4870 and the sound card is?<span class="Apple-style-span">Sound Blaster Li've - model ct4870.Help me to find its driver. Thank before !

    I About the only thing you're going to find for drivers for that old card is this,
    http://forums.creative.com/creativel...hread.id=40948
    as Creative will never release Windows 7 drivers for it.

  • Sound Blaster Live 5.1 - SF1 damaged.

    houk
    Yesterday I've found on my SBLi've5. that subassembly signed as SF (near MID/Gameport) is corrupted (looks like burned out).. Is this little one correspond with using an eventual midi keyboard od game controller? What kind of component is that? Resistor? Or something else? If this thing is important for communication through MIDI/Gameport, and if yes - could it be repaired by changing invalid component?

    Originally Posted by dogweed
    I lost my install disk for my sound blaster live 5.1 model SBO 100 for windows 98se. I cant seem to find drivers on creative's web site that will work with my card. Any one know where I can get them.
    Here:
    http://ccftp.creative.com/manualdn/D...BL51_W9xME.exe
    Creative Surround Mixer (Windows 95, 98, and Millennium)
    Creative AudioHQ (Windows 95, 98, and Millennium)
    Creative Installer 1.00.07 (Windows 95, 98, and Millennium)
    here:
    http://www.vogonsdrivers.com/index.php?catid=3
    or here:
    http://www.touslesdrivers.com/index....ge=12&v_code=4
    Next time please use 'uncle google'...

  • BA7500G + Sound Blaster Live! 24-bit + Windows 2k = no sound

    Similar to the thread for Win XP, I have inherited a BA7500g speaker system, and purchased a new Sound Blaster Live! 24-bit card for my Win2k system. Cannot get the speakers to work, although the speaker test works from the BA control unit. Noticed the digital audio input cable is color coded, and I don't have the original card that matches this scheme. Could this be the problem?

    I have installed a new (not used) Soundblaster Audigy SE and BA7500G speakers and I'm running XP Pro. I'm getting no sound even when I change to Digital Out only? Not sure what to do? Is this sound card not compatible with my speakers? Do I need to purchase the Digital I/O Module that Creative is currently not in stock? I can find the Digital I/O module on Ebay if need be but not sure that's the solution. Please help!
    Thanks,
    Kevin

  • CREATIVE SOUND BLASTER LIVE 5 voice dist

    I have a CREATIVE SOUND BLASTER LIVE 5, I want to know if some?software of Creative labs?exists to distort the voice in real time.Pablo Castillo R.
    http://pablocr.pe.kzMessage Edited by pcr_sof on 06-08-200709:48 PM
    Message Edited by pcr_sof on 06-2-200708:36 PM

    Take a look at the following thread:http://forums.creative.com/creativel...message.id=994?That is the best you can get. Did you run WindowsUpdate to get the drivers installed?If you did, just change the speaker setup to?4 speakers, then check and uncheck the?Digital Output Only checkbox to get sound back.

  • Definitive Vista Driver for Sound Blaster Live!

    Is there a "definitive" 3rd party driver solution for the Soun Blaster Live! 5. (including Dell Digital version) that enables all features including the digital out If no one agrees on a single solution can we get a list of options here. Here is what I have seen so far http://forums.creative.com/creativel...ssage.id=23567 http://forums.creative.com/creativel...scending&page= http://www.aeonity.com/david/creativ...vista-download Sound Blaster Live! - LiveDrvUni-Pack (English) KX project driver Anything else Which is best Anything new

    Download Sound Blaster CD ISO?s:
    http://hosted.filefront.com/BadBoyforum
    Creative Li've! 5. Digital Drivers:
    http://es.europe.creative.com/support/downloads/welcome.asp?bEOSLAgree=yes&action=next&sOSName=&re gion=3&MainCategory=266&Product_Name=Li've%2+5%2E+ Digital&Product_ID=853&modelnumber=
    Message Edited by Rad-Wulf on 07-27-200709:28 PM

  • Sound Blaster Live! 5.1, DR release 1.

    I have this card instalelc currently my pit bull ate my CD. so when I formatted now I have a "BLUE" mixxer But I originaly had the "Cold Platnuim" look one with the Soundblaster center that droped down from the top of my screen?So now my sound card dont work to well cant do any affects on the mic anymore and my Mixxer dont load my Mixxer sounds. Can anyone help me find the mixxer/drivers/ instal lfor my Soundcard please?Im on Windows XP atm?My card as noted is ""?Thanks Bamsen

    Originally Posted by dogweed
    I lost my install disk for my sound blaster live 5.1 model SBO 100 for windows 98se. I cant seem to find drivers on creative's web site that will work with my card. Any one know where I can get them.
    Here:
    http://ccftp.creative.com/manualdn/D...BL51_W9xME.exe
    Creative Surround Mixer (Windows 95, 98, and Millennium)
    Creative AudioHQ (Windows 95, 98, and Millennium)
    Creative Installer 1.00.07 (Windows 95, 98, and Millennium)
    here:
    http://www.vogonsdrivers.com/index.php?catid=3
    or here:
    http://www.touslesdrivers.com/index....ge=12&v_code=4
    Next time please use 'uncle google'...

  • Sound Blaster Live! Platinum 5.1 and DTT2500 5.1

    Hello!
    I have a Sound Blaster Live! Platinum 5.1 and a Cambridge Soundworks DTT2500 5.1 Digital Sound System.
    I linked them with with the SPDIF-Out on the Live! Drive.
    First i thought it works but then i realized that there is only sound from the 2 front and the center speakers. There is no Signal on the Sorround Speakers.
    When i do the sound test in the sorround mixer, only the left and the right front speakers work.
    Do i have to link it with this 9 pin digital din cable? But i don't have such and don't know where to get.
    Can you help me?
    How do i have to link this devices?

    You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

  • Sound Blaster Live CT4620 and Windows XP can it work and h

    Hello, I have an old Sound Blaster Li've Model CT4620 that I installed on my old PC (windows 95) and loved quite a while back, I have since upgraded my Pc to a newer model that has Windows XP Pro and was hoping to install my old much loved Sound Blaster Li've card but when I went to install the drivers from my origanal discs windows put up a warning that this version of driver was not compatable with my system. I have looked around the site and am lost. Is there any hope for me and my older Sound blaster li've card? If so what do I need to do, download, install to run it's I am not very PC smart so please take it slow for me Thank you!

    XP drivers,?http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+XP&region=&Product_Na me=Li've%2&Product_ID=4857&modelnumber=&driverlang =033&OS=0&drivertype=0&x=3&y=7?And yes, just download and run the installer.

  • The frontal panel of SOUND BLASTER LIVE 5.1 works, whit Audigy 2

    They estan to me selling a frontal panel of card SOUND BLASTER LIVE 5, worked in the
    AUDIGY 2 ZS so that my AUDIGY did not bring the frontal panel.
    Please.....
    Atentamente Jose Gonzalez (Venezuela)

    not quite sure how much this goes contrary to the interest of this Forum :smileytongue: but according to this it works:
    http://www.driverheaven.net/showthre...79&page=2&pp=5
    make sure to read the whole thing
    cherio
    PHYNESSE

  • Sbl-soundfonts: soundfont midi lib for sound blaster live

    Something I needed for midi tests of my sound blaster live card.
    The first soundfont file was suggested as the best general soundfont library available for free (8MB). The second is from my sb live install cd (4MB). If you only want the first one remove second source file and second md5sum. You will need asfxload from awesfx package (http://bbs.archlinux.org/viewtopic.php?p=77155) to load the library.
    More info and soundfont libraries are available at:
    http://www.linux.com/howtos/MIDI-HOWTO-10.shtml
    http://www.euronet.nl/~mailme/index4.html
    http://www.synthzone.com/soundfont.htm
    http://alive.singnet.com.sg/musician/
    http://listen.to/sblive
    http://www.indezine.com/products/sound/soundfonts.html
    http://www.soundfont.com/
    http://alsa.opensrc.org/index.php?page=asfxload
    http://alsa.opensrc.org/index.php?page=emu10k1
    http://alsa.opensrc.org/index.php?page= … ntHandling
    pkgname=sbl-soundfonts
    pkgver=1.0
    pkgrel=1
    pkgdesc="SoundFonts files for SoundBlaster Live!"
    url="http://www.creative.com"
    depends=('awesfx')
    source=(http://www.alsa-project.org/~james/sound-fonts/8MBGMSFX.SF2 CT4MGM.SF2)
    md5sums=('568ddfaa56db2bb45fc96e28dcc711ad' '1652dfbefe914bdb8dc03afc0c76f619')
    build() {
    cd $startdir/src
    install -d -m755 $startdir/pkg/usr/share/soundfonts
    install -m644 *.SF2 $startdir/pkg/usr/share/soundfonts

    I recently answered about the same question:
    If you?use Vista or Windows7, then there is no official driver. You can only use alternati've drivers like Vista Support Pack by Daniel_K or the one from KXProject (better). But if you have more than 2 gigs of memory installed or an x64 OS, then both drivers will be half-working (as far as I remember, Daniel's driver won't work with more than 2 Gb of memory installed in any OS, and with KX-driver there will only be a problem with MIDI playback with more than 2 Gb AND x64 Win7).

Maybe you are looking for

  • How to trigger a proxy in SAP PI 7.1

    Dear friends   How are you? I am not able to calla proxy in my system,  it throws the dump error like The reason for the exception is: You attempted to use a 'NULL' object reference (points to 'nothing') access a component. An object reference must p

  • Query is not working correctly

    Hi all, Below query is not working correctly. Please let me know, if you find the mistake select a.name, b.VOD_NAME, count(xm.ATTRIB_03) from siebel.s_vod b left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID left outer join vod d on c.VOD_ID=

  • Task flow not visible

    I was experimenting with the UI Shell after viewing Chris Muir's presentation. I attempted to put a task flow as a second level tab and the tab shows up but the content (a simple table) is not showing. The task flow has only one activity and no param

  • Procurement of non valuated materials Problems at PR Conversion time

    Dear Gurus, I need a hand on defining settings for non valuated stock materials procurement. 1-> Am using a copy of non valuated material type UNWB to which i added Accounting views )for GL acc determination through valuation class). 2-> In OPPQ, "Ac

  • What can't client connect to RMI server on same machine?

    I'm trying to get a client to connect to an RMI server that resides on the same machine, but it's not working. When run, I get the following exception: java.rmi.ConnectException: Connection refused to host: 121.0.0.55; nested exception is: java.net.C