Sound Blaster Live! Platinum 5.1 and DTT2500 5.1

Hello!
I have a Sound Blaster Live! Platinum 5.1 and a Cambridge Soundworks DTT2500 5.1 Digital Sound System.
I linked them with with the SPDIF-Out on the Live! Drive.
First i thought it works but then i realized that there is only sound from the 2 front and the center speakers. There is no Signal on the Sorround Speakers.
When i do the sound test in the sorround mixer, only the left and the right front speakers work.
Do i have to link it with this 9 pin digital din cable? But i don't have such and don't know where to get.
Can you help me?
How do i have to link this devices?

You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

Similar Messages

Sound Blaster Live Platinum 5.1 and MCE2

I have recently built myself a WindowsXP Media Center Edition PC for my entertainement box. I also own a Sound Blaster Li've! Platinum 5. that I bought when it just came out. I have installed the drivers from a new CD that I found on the Net, these work fine. Everything works except for the following. I had a look @ the remote and it has everything that MCE would need to control it.
Now, my problem is this. Does anyone know how I can let that remote operate MCE? I have looked all over the net, and I havn't found anything that allows me to configure it. Any Idea?
Regards,
Davin Hansen
(South Africa)

You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

Sound Blaster Live Platinum and

Hello folks
I have a sound blaster li've platinum connect to a home theatre amplifier 5+ by coax digital out of front panel. Well when i play a DVD if i select audio in dolby digital i listen OK but i dont listen in dts. I fix dts input in my amplifier, but nothing sound. May depend by my sound blaster type? Thankssss Folco

You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

Creative Sound Blaster Live 5.1 Digital and Vi

Hi, I have Creative Sound Blaster Li've 5. Digital in my computer. I recently clean installed Windows Vista. Everything went fine, its been few months now everything was fine. But for the past few days my Vista computer is showing a blue screen on startup and will allow me to boot in Safe mode only with following error:
Download updates for Creative Sound Blaster Li've 5. Digital
?
This problem was caused by Creative Sound Blaster Li've 5. Digital,
which was created by Creative Technology Ltd.
Solution
To solve this problem, follow these steps:
Go online to the following website:
<img alt="[/img] src="http://wer.microsoft.com/Responses/include/images/arrow.gif">[color="#3a8e6">Creative Technology Ltd
<
Find SBL5DL_PCPatch_LB_3.exe, and then install it.
<
I downloaded above EXE file from creative web site and tried but it says File does not support Vista.
Can anyone please Help!!!
Idrees Adam

The front panel connections you want to use are adapted to be connected to a motherboard with audio included, NOT to a PCI audio card. You'll have to connect the front panel wires to your motherboard's audio connnector.
Greetings.
El At?n

Problems with Sound Blaster Live! 5.1 and a freshly reformatted windows 98se

Hello.
Lets get right down to business shall we? I've recently reformatted my computer and reinstalled the somewhat outdated OS windows 98 second edition. I've only recently managed to get my network card and modem working with my refreshed machine again but now I'm having problems getting my sound card (Sound Blaster Li've! 5. Digital) working again too. Its as if the computer CAN'T recognize the fact that there is a sound card inserted into the port. What do I do?

Try the card in another PCI slot to see if it will pick it up then.
Which model is this exactly (like Li've 5. Player, Li've 5. Digital, or another)? Do you know which model number is printed on the card?
It's possible the card doesn't have Windows98 support, newer cards do not support that Operating System so it may not have drivers on the CD for that OS.
Cat

Sound Blaster Live! 24-Bit and Panasonic Home Theater Sys

I'm trying to hook up my Panasonic SA-HT700 Home Theater Sound System to the Sound Blaster Li've! 24-Bit but I'm not getting any 5. sounds. All I'm getting is the front channels... any way I can get 5. setup from this particular sound card?Message Edited by Koroshiya on -03-2004 2:03 AM

Koroshiya
We have an article on Knowledgebase that cover the information you are looking for. You can have a look at this article.
http://us.creative.com/support/kb/article.asp?l=2&sid=4438
Jason

Sound blaster live platinum 5.1 installation help ple

Hi,I have a SB li've P 5. sound card. I had to replace hard dri've and OS to XP My install disk isn't supported by XP and closes out. I downloaded the install from Creative for XP but when I ran it, it also closed out because it couldn't find a previous install. So how do I get the software back on to run my sound card? I'm trying to connect my cassette player back up to it so I can record cassettes into my computer to make CD's out of them. I used to be able to when I had the software on my old machine.Regards,Chuck

You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

Sound Blaster Live Platinum 5.1 with Live! Drive IR , live Drive unable to w

, I tried with installing with the Original CD, drivers from the website.. still cant make it to work...
I tried everything on this forum... is there a way? the connection is correct because is exclusi'vely different, power is on I could hear hissing from the output
I am using windows 2000

Installation CD for Windows XP and older OS.
Part
http://www.megaupload.com/?d=24B0A8F
Part2
http://www.megaupload.com/?d=24YEBDV
Download both part and 2 to the same folder, unrar, burn the ISO of the installation CD and then run installation from this new CD.

Sound Blaster Audigy Platinum EX

Hello, I have a Sound Blaster audigy platinum EX-, me and bought a new PC and have put my targeta SB, but in the installation as soon as this one quite made, when I want to calibrate my 5. puncturing in Mediasource's icon there goes out a mistake that he says: his targeta is not compatible with this controller. I have put him Win XP with SPack 3, as I have seen it is not drivers for this targeta with SPack 3, only it is with SPack 2, which I must do , do I put a SPack 2 Or is it drivers for SPack 3
I m Spanish, a pardon for my English

Hi Specter,
Don't worry, it's better to ask questions and get the answers you need, than to be confused or unsure
The first question is a bit subjecti've, some people may notice the difference, but the quality/SNR on those cards is very high so it shouldn't make much of a difference really. It will sound better aswell as you'll be hearing the full effects, in the proper speakers, instead of just stereo.
As far as the second query goes, I can't really recommend any particular application to you personally, but others can add their input there. The full versions of the various applications should all pretty much have the same options, at least the ones I've tested generally allow you to change the audio option which is what you'll need if you want to connect digitally (most DVD applications now have a built-in decoder, but if you want the audio to be sent over the digital connection you need to turn off the decoding option, so it outputs the signal untouched, to your receiver). Trial versions don't have as many options though, so on some you might not be able to adjust the option you need, but that shouldn't be a problem on full versions.
Hope that helps,
Cat

Sound Blaster live! not found when I try and update dri

I had ordered a Dell PC with Sound Blaster Li've! I double checked and made sure I have the correct Sound Blaster which I do. I have uninstalled and reinstalled sound blaster li've! and it still does not let me update my driver. I took the CD out put it back then tried updating the driver and still it says no Sound Blaster Li've found.
pls help
Driver I am trying to download
Sound Blaster Li've! - Li'veDrvUni-Pack (English) (23.32 MB)

This package upgrades the Sound Blaster Li've! driver and enhances the overall product performance on Windows 2000 and Windows XP. The package also upgrades core applications including Audio HQ and Surround Mixer for optimal Sound Blaster Li've! performance.
div>

VegetaH wrote:
I had ordered a Dell PC with Sound Blaster Li've! I double checked and made sure I have the correct Sound Blaster which I do. I have uninstalled and reinstalled sound blaster li've! and it still does not let me update my driver. I took the CD out put it back then tried updating the driver and still it says no Sound Blaster Li've found. pls help Driver I am trying to download Sound Blaster Li've! - Li'veDrvUni-Pack (English) (23.32 MB) This package upgrades the Sound Blaster Li've! driver and enhances the overall product performance on Windows 2000 and Windows XP. The package also upgrades core applications including Audio HQ and Surround Mixer for optimal Sound Blaster Li've! performance. div>
Dell .... try if you can DL Dell 'made' drivers from Dell Support.
jutapa

Problems with Sound Blaster Live! 1024 and Windows 2000 Profession

Hello everybody, and thank you since now for your help and support.
Please, forgive my english (I'm italian) not so good, but I hope you can understand me the same.
I have a Sound Blaster Li've! 024, and so far everything works fine with Windows 98 SE, but lately I have installed Windows 2000 Professional on my PC, and now nothing works.
Nothing, neither the softwares, they don't even start!
Here is what I tried so far:
- First, I tried to install the old version of the programs, the ones that I had in the CD-ROM when I bought the sound card. At this point, I couldn't even uninstall the softwares!
- Then, I tried to update the drivers, but it seems that they're already updated when you install Win2000, and the uninstallation didn't works yet.
- At last, I have downloaded the new software pack, Li'veDrvUni-Pack.exe, but nothing even so. But with this, at least, I was able to uninstall everything from the PC (even if not perfectly).
- Today, I tried to install only the new pack, Li'veDrvUni-Pack.exe, but still nothing works. When I start running the program (e.g. AudioHQ), I can see the hourglass for few seconds and then everything aborts.
Please, help me! What can I do? I really don't want to buy a new sound card, even because my SB Li've! 024 works perfectly until now.
Thank you very much for the attention and for your suggestions.
Andrea Iovinelli

Driver for Sound Blaster Li've! 024 for Vista
i have Sound Blaster Li've! 024 , and Vista, and sound is totaly s*it or not working.. but, you can install drivers from Russians and all will work fine with good quality!
http://kxproject.lugosoft.com
Tags:
SoundBlaster Li've! 024 Vista driver Sound Blaster Li've! 024 for Vista Driver Download Driver For Sound Blaster Li've 024 Vista

Sound Blaster Live 5.1 - SF1 damaged.

houk
Yesterday I've found on my SBLi've5. that subassembly signed as SF (near MID/Gameport) is corrupted (looks like burned out).. Is this little one correspond with using an eventual midi keyboard od game controller? What kind of component is that? Resistor? Or something else? If this thing is important for communication through MIDI/Gameport, and if yes - could it be repaired by changing invalid component?

Originally Posted by dogweed
I lost my install disk for my sound blaster live 5.1 model SBO 100 for windows 98se. I cant seem to find drivers on creative's web site that will work with my card. Any one know where I can get them.
Here:
http://ccftp.creative.com/manualdn/D...BL51_W9xME.exe
Creative Surround Mixer (Windows 95, 98, and Millennium)
Creative AudioHQ (Windows 95, 98, and Millennium)
Creative Installer 1.00.07 (Windows 95, 98, and Millennium)
here:
http://www.vogonsdrivers.com/index.php?catid=3
or here:
http://www.touslesdrivers.com/index....ge=12&v_code=4
Next time please use 'uncle google'...

BA7500G + Sound Blaster Live! 24-bit + Windows 2k = no sound

Similar to the thread for Win XP, I have inherited a BA7500g speaker system, and purchased a new Sound Blaster Live! 24-bit card for my Win2k system. Cannot get the speakers to work, although the speaker test works from the BA control unit. Noticed the digital audio input cable is color coded, and I don't have the original card that matches this scheme. Could this be the problem?

I have installed a new (not used) Soundblaster Audigy SE and BA7500G speakers and I'm running XP Pro. I'm getting no sound even when I change to Digital Out only? Not sure what to do? Is this sound card not compatible with my speakers? Do I need to purchase the Digital I/O Module that Creative is currently not in stock? I can find the Digital I/O module on Ebay if need be but not sure that's the solution. Please help!
Thanks,
Kevin

CREATIVE SOUND BLASTER LIVE 5 voice dist

I have a CREATIVE SOUND BLASTER LIVE 5, I want to know if some?software of Creative labs?exists to distort the voice in real time.Pablo Castillo R.
http://pablocr.pe.kzMessage Edited by pcr_sof on 06-08-200709:48 PM
Message Edited by pcr_sof on 06-2-200708:36 PM

Take a look at the following thread:http://forums.creative.com/creativel...message.id=994?That is the best you can get. Did you run WindowsUpdate to get the drivers installed?If you did, just change the speaker setup to?4 speakers, then check and uncheck the?Digital Output Only checkbox to get sound back.

Sound Blaster Live Code Key Model CT4

Have lost my code key for my Sound Blaster Li've. Would be helpful if someone else has the key if they could share it with me.

Originally Posted by dogweed
I lost my install disk for my sound blaster live 5.1 model SBO 100 for windows 98se. I cant seem to find drivers on creative's web site that will work with my card. Any one know where I can get them.
Here:
http://ccftp.creative.com/manualdn/D...BL51_W9xME.exe
Creative Surround Mixer (Windows 95, 98, and Millennium)
Creative AudioHQ (Windows 95, 98, and Millennium)
Creative Installer 1.00.07 (Windows 95, 98, and Millennium)
here:
http://www.vogonsdrivers.com/index.php?catid=3
or here:
http://www.touslesdrivers.com/index....ge=12&v_code=4
Next time please use 'uncle google'...

Sound Blaster Live! Platinum 5.1 and DTT2500 5.1

Similar Messages

Maybe you are looking for