Sound Blaster Live Platinum and

Hello folks
I have a sound blaster li've platinum connect to a home theatre amplifier 5+ by coax digital out of front panel. Well when i play a DVD if i select audio in dolby digital i listen OK but i dont listen in dts. I fix dts input in my amplifier, but nothing sound. May depend by my sound blaster type? Thankssss Folco

You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

Similar Messages

Sound Blaster Live Platinum 5.1 and MCE2

I have recently built myself a WindowsXP Media Center Edition PC for my entertainement box. I also own a Sound Blaster Li've! Platinum 5. that I bought when it just came out. I have installed the drivers from a new CD that I found on the Net, these work fine. Everything works except for the following. I had a look @ the remote and it has everything that MCE would need to control it.
Now, my problem is this. Does anyone know how I can let that remote operate MCE? I have looked all over the net, and I havn't found anything that allows me to configure it. Any Idea?
Regards,
Davin Hansen
(South Africa)

You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

Sound Blaster Live CT4620 and Windows XP can it work and h

Hello, I have an old Sound Blaster Li've Model CT4620 that I installed on my old PC (windows 95) and loved quite a while back, I have since upgraded my Pc to a newer model that has Windows XP Pro and was hoping to install my old much loved Sound Blaster Li've card but when I went to install the drivers from my origanal discs windows put up a warning that this version of driver was not compatable with my system. I have looked around the site and am lost. Is there any hope for me and my older Sound blaster li've card? If so what do I need to do, download, install to run it's I am not very PC smart so please take it slow for me Thank you!

XP drivers,?http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+XP&region=&Product_Na me=Li've%2&Product_ID=4857&modelnumber=&driverlang =033&OS=0&drivertype=0&x=3&y=7?And yes, just download and run the installer.

Sound blaster live platinum 5.1 installation help ple

Hi,I have a SB li've P 5. sound card. I had to replace hard dri've and OS to XP My install disk isn't supported by XP and closes out. I downloaded the install from Creative for XP but when I ran it, it also closed out because it couldn't find a previous install. So how do I get the software back on to run my sound card? I'm trying to connect my cassette player back up to it so I can record cassettes into my computer to make CD's out of them. I used to be able to when I had the software on my old machine.Regards,Chuck

You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

Sound Blaster Live Platinum 5.1 with Live! Drive IR , live Drive unable to w

, I tried with installing with the Original CD, drivers from the website.. still cant make it to work...
I tried everything on this forum... is there a way? the connection is correct because is exclusi'vely different, power is on I could hear hissing from the output
I am using windows 2000

Installation CD for Windows XP and older OS.
Part
http://www.megaupload.com/?d=24B0A8F
Part2
http://www.megaupload.com/?d=24YEBDV
Download both part and 2 to the same folder, unrar, burn the ISO of the installation CD and then run installation from this new CD.

Sound Blaster Audigy Platinum BIG Proble

I have sound blaster audigy platinum and in few weeks I have got this strange problem that I?ve hadn't before. If I use old drivers for it, windows gives me blue screen with "bad pool caller" very often when I play or just listen music. With new drivers it gives me "driver irql not less or equal". At the same time in linux it works fine. In windows I've checked viruses etc. reinstalled windows many times, used memtest and so on. Finally 2 days ago I took my Sound blaster off my computer and ever since I haven't got any problems. So it obviously is the problem. But I just don't know what to do anymore to get it work? Now I use the sound card that comes integrated with my motherboard but it's not as good. Btw I don't use integrated sound card same time with sound blaster. Please Help!

Hate29,
You might find something useful here.

Sound Blaster Live! Platinum 5.1 and DTT2500 5.1

Hello!
I have a Sound Blaster Live! Platinum 5.1 and a Cambridge Soundworks DTT2500 5.1 Digital Sound System.
I linked them with with the SPDIF-Out on the Live! Drive.
First i thought it works but then i realized that there is only sound from the 2 front and the center speakers. There is no Signal on the Sorround Speakers.
When i do the sound test in the sorround mixer, only the left and the right front speakers work.
Do i have to link it with this 9 pin digital din cable? But i don't have such and don't know where to get.
Can you help me?
How do i have to link this devices?

You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

Sound Blaster Live 5.1 - SF1 damaged.

houk
Yesterday I've found on my SBLi've5. that subassembly signed as SF (near MID/Gameport) is corrupted (looks like burned out).. Is this little one correspond with using an eventual midi keyboard od game controller? What kind of component is that? Resistor? Or something else? If this thing is important for communication through MIDI/Gameport, and if yes - could it be repaired by changing invalid component?

Originally Posted by dogweed
I lost my install disk for my sound blaster live 5.1 model SBO 100 for windows 98se. I cant seem to find drivers on creative's web site that will work with my card. Any one know where I can get them.
Here:
http://ccftp.creative.com/manualdn/D...BL51_W9xME.exe
Creative Surround Mixer (Windows 95, 98, and Millennium)
Creative AudioHQ (Windows 95, 98, and Millennium)
Creative Installer 1.00.07 (Windows 95, 98, and Millennium)
here:
http://www.vogonsdrivers.com/index.php?catid=3
or here:
http://www.touslesdrivers.com/index....ge=12&v_code=4
Next time please use 'uncle google'...

BA7500G + Sound Blaster Live! 24-bit + Windows 2k = no sound

Similar to the thread for Win XP, I have inherited a BA7500g speaker system, and purchased a new Sound Blaster Live! 24-bit card for my Win2k system. Cannot get the speakers to work, although the speaker test works from the BA control unit. Noticed the digital audio input cable is color coded, and I don't have the original card that matches this scheme. Could this be the problem?

I have installed a new (not used) Soundblaster Audigy SE and BA7500G speakers and I'm running XP Pro. I'm getting no sound even when I change to Digital Out only? Not sure what to do? Is this sound card not compatible with my speakers? Do I need to purchase the Digital I/O Module that Creative is currently not in stock? I can find the Digital I/O module on Ebay if need be but not sure that's the solution. Please help!
Thanks,
Kevin

CREATIVE SOUND BLASTER LIVE 5 voice dist

I have a CREATIVE SOUND BLASTER LIVE 5, I want to know if some?software of Creative labs?exists to distort the voice in real time.Pablo Castillo R.
http://pablocr.pe.kzMessage Edited by pcr_sof on 06-08-200709:48 PM
Message Edited by pcr_sof on 06-2-200708:36 PM

Take a look at the following thread:http://forums.creative.com/creativel...message.id=994?That is the best you can get. Did you run WindowsUpdate to get the drivers installed?If you did, just change the speaker setup to?4 speakers, then check and uncheck the?Digital Output Only checkbox to get sound back.

Sound Blaster Live Code Key Model CT4

Have lost my code key for my Sound Blaster Li've. Would be helpful if someone else has the key if they could share it with me.

Originally Posted by dogweed
I lost my install disk for my sound blaster live 5.1 model SBO 100 for windows 98se. I cant seem to find drivers on creative's web site that will work with my card. Any one know where I can get them.
Here:
http://ccftp.creative.com/manualdn/D...BL51_W9xME.exe
Creative Surround Mixer (Windows 95, 98, and Millennium)
Creative AudioHQ (Windows 95, 98, and Millennium)
Creative Installer 1.00.07 (Windows 95, 98, and Millennium)
here:
http://www.vogonsdrivers.com/index.php?catid=3
or here:
http://www.touslesdrivers.com/index....ge=12&v_code=4
Next time please use 'uncle google'...

Sbl-soundfonts: soundfont midi lib for sound blaster live

Something I needed for midi tests of my sound blaster live card.
The first soundfont file was suggested as the best general soundfont library available for free (8MB). The second is from my sb live install cd (4MB). If you only want the first one remove second source file and second md5sum. You will need asfxload from awesfx package (http://bbs.archlinux.org/viewtopic.php?p=77155) to load the library.
More info and soundfont libraries are available at:
http://www.linux.com/howtos/MIDI-HOWTO-10.shtml
http://www.euronet.nl/~mailme/index4.html
http://www.synthzone.com/soundfont.htm
http://alive.singnet.com.sg/musician/
http://listen.to/sblive
http://www.indezine.com/products/sound/soundfonts.html
http://www.soundfont.com/
http://alsa.opensrc.org/index.php?page=asfxload
http://alsa.opensrc.org/index.php?page=emu10k1
http://alsa.opensrc.org/index.php?page= … ntHandling
pkgname=sbl-soundfonts
pkgver=1.0
pkgrel=1
pkgdesc="SoundFonts files for SoundBlaster Live!"
url="http://www.creative.com"
depends=('awesfx')
source=(http://www.alsa-project.org/~james/sound-fonts/8MBGMSFX.SF2 CT4MGM.SF2)
md5sums=('568ddfaa56db2bb45fc96e28dcc711ad' '1652dfbefe914bdb8dc03afc0c76f619')
build() {
cd $startdir/src
install -d -m755 $startdir/pkg/usr/share/soundfonts
install -m644 *.SF2 $startdir/pkg/usr/share/soundfonts

I recently answered about the same question:
If you?use Vista or Windows7, then there is no official driver. You can only use alternati've drivers like Vista Support Pack by Daniel_K or the one from KXProject (better). But if you have more than 2 gigs of memory installed or an x64 OS, then both drivers will be half-working (as far as I remember, Daniel's driver won't work with more than 2 Gb of memory installed in any OS, and with KX-driver there will only be a problem with MIDI playback with more than 2 Gb AND x64 Win7).

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

First off your operating system version is obsolete and not being updated for security issues from Apple.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
So at least you need to upgrade to 10.6.8, and that will make your machine secure again.
However if you decide to upgrade further to 10.7 or 10.8, be forewarned your PPC based software of old is not going to work any longer. and your machine may require more RAM.
Check here to see and download the free MacTracker to see your machines true RAM potential and specs. There are videos online at YouTube, it's really easy to install yourself.
http://roaringapps.com/apps:table
I checked out the z-5500, apprantly the optical out shouldn't be a problem, however the surround sound decoding is a problem as the Mac doesn't do it, just passes it through for decoding on a receiver via the optical out port if your Mac has one.
Use the free MacTracker to find out or when you upgrade OS X, there is a option in the System Preferences > Sound.
https://logitech-en-ap.custhelp.com/app/answers/detail/a_id/9693/section/trouble shoot/crid/409/lt_product_id/224/tabs/1,3,2,4,5/cl/sg,en
The Sound Blaster Live 24 bit doesn't do Dolby 5.1 according to Wikipedia. More info on it is here.
http://support.creative.com/Products/ProductDetails.aspx?catID=1&prodID=10702&pr odName=Live!%2024-bit%20External&CatName=Sound+Blaster
If it's able to accept optical toslink cable from the Mac's toslink stereo mini port (if it has optical output) and then send that to the z-5500 via the analog speakers, then you should be fine.
I'm afraid you'll have to do some more digging to get it to work.
The only surround sound your going to get is by playing DVD movies that have it, then it can't have Dolby 5.1 as the Live 24 bit can't decode it.
So do your research on what surround sound formats the Live 24 can decode, then compare your DVD collection for those movies that have it, then get it all connected and enable it on the movie preferences at the menu.
Good Luck

Sound Blaster Live! 5.1, DR release 1.

I have this card instalelc currently my pit bull ate my CD. so when I formatted now I have a "BLUE" mixxer But I originaly had the "Cold Platnuim" look one with the Soundblaster center that droped down from the top of my screen?So now my sound card dont work to well cant do any affects on the mic anymore and my Mixxer dont load my Mixxer sounds. Can anyone help me find the mixxer/drivers/ instal lfor my Soundcard please?Im on Windows XP atm?My card as noted is ""?Thanks Bamsen

Originally Posted by dogweed
I lost my install disk for my sound blaster live 5.1 model SBO 100 for windows 98se. I cant seem to find drivers on creative's web site that will work with my card. Any one know where I can get them.
Here:
http://ccftp.creative.com/manualdn/D...BL51_W9xME.exe
Creative Surround Mixer (Windows 95, 98, and Millennium)
Creative AudioHQ (Windows 95, 98, and Millennium)
Creative Installer 1.00.07 (Windows 95, 98, and Millennium)
here:
http://www.vogonsdrivers.com/index.php?catid=3
or here:
http://www.touslesdrivers.com/index....ge=12&v_code=4
Next time please use 'uncle google'...

Sound blaster audigy platinum ex constant static sound, PLEASE HE

hey, i just got my sound blaster audigy platinum ex sound card today and the second i installed it and plugged in my speakers i got this static noise that would come out at all times, when i would play music you could hear the music softly, but still the static dominates. I disables my onboard sound and tried reinstalling in a different pci slot but still same problem. This is my first time buying a creative card and it has not been a pleasant experience so far. Can anyone please help me?
My pc is
windows XP pro
amd 3000+ 64
Asus K8V SE deluxe socket 754 via k8t00 ATXASUS

siruis,
go to the mixer settings and one of the sliders. the one
beside the wave slider to the right and slide it down to about 40% and try it, while playing if static still present
slide it down more while the track is playing, i had the same prob wwith li've 24bit 7. and this cured it for me.
hope this helps you.
john ( good luck )

Sound Blaster Live Platinum and

Similar Messages

Maybe you are looking for