Sound Blaster PCI 128 \\ Windows 7 \\ driver

I have Sound Blaster PCI 28.
Bat?i?have?no?found?in?tecnical?support a driver to use on Windows 7.
Help?please. Or, what to do?

...strange...
at first i tried to put the old driver (for XP) from instalation disk,
then i did automatic search...
and happiness happen...
....may be, you have to choose audio device from list
try

Similar Messages

Sound Blaster PCI causes Windows 98SE to hang at boot

ASUS P5VD-X motherboard, PentiumD805, GB RAM, 250GBHD, Win98 and XP Dual Boot, Ati Radeon 256 8x AGP.
Hi. After installing the standard old Sound blaster PCI card under Win98SE with the drivers disc and rebooting PC, Win 98 just hangs at the boot screen. I can still get into safe mode and have tried uninstalling [url="http://www.computing.net/windows95/wwwboard/forum/6989.html#" target="_new">[color="green">Sound Blaster[/url] PCI from add remove programs but unfortunately still cant get [url="http://www.computing.net/windows95/wwwboard/forum/6989.html#" target="_new">[color="green">win98[/url] to load normally. I have the onboard SoundMAX audio which is still enabled in bios and?its drivers?installed on win98 so i guess i could use that instead of Sound Blaster if i could boot normally into win98. The [url="http://www.computing.net/windows95/wwwboard/forum/6989.html#" target="_new">[color="green">Sound blaster card[/url] is now removed from [url="http://www.computing.net/windows95/wwwboard/forum/6989.html#" target="_new">[color="green">motherboard[/url] but win98 still hangs on boot up.
When i installed the SBPCI drivers disc and before i rebooted win98 before the crash i noticed that it placed windows media player icons on desktop. I have also tried uninstalling media player.
Interestingly i cant even get the bootlog option or command prompt to work at all it just freezes even though safe mode and safe mode command prompt only work.
I have tried restoring the registry with scanreg/restore to a week ago when there were no boot up problems. This however has still not resolved the boot up hang as soon as windows 98 logo appears.
Can anyone help?

A bunch of things are probably conflicting. The Creative cd seems to have installed WMP7 (later cd's might do that.)? Or possibly a version of WMP6. Your SoundMAX driver is conflicting with the Creative driver. 98 doesn't play well with 2 soundcards. You should have uninstalled the SoundMAX, deactivated it in the BIOS, then installed the Creative card and drivers. 98 can be trashed easily by this kind of thing. I would format (have all your drivers and program setup files saved to a cdr and remove all hardware except for keyboard, mouse and videocard) and install Windows. Install?all the optional Windows components you want from Add/Remove Windows Components tab and the Plus 98!?software if you have it. Then use the packages such as the Unofficial 98SE Service Pack and the Autopatcher Alpha .6 for Windows 98SE on msfn.org Windows 98SE Service Pack forum to update your system. That Autopatcher contains just about all the updates and the Service Pack (installed first) contains?some nice registry tweaks, 256 color tray icons, Windows 2000 color scheme,?nicer desktop icons, a cleaner Dialup Networking .4 install than Microsoft gives you, etc. Then install your hardware and drivers. Have your on board audio disabled in the BIOS from the start if you want to install a Creative card instead.

Problems with Sound Blaster PCI 128 at Wi

Hello,
I've a Sound Blaster PCI 28 Sound Card from Creative. I never had any problems with it when I was using it at WinME. But now I had to install WinXP Prof (incl. SP + SP2) for using some new programs and the soundcard doesn't work at all there.
The card is shown at the device manager at "Other/Unkown devices" as "Audio Controller for Multimedia". I downloaded some drivers from the archi've of the creative homepage witch were said to be for this card used at WinXp. Here are the links for this drivers:
For example:
http://de.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=864&dlcentric= 843&Product_Name=PCI+28&OSName=Windows+XP
http://de.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=864&dlcentric= 255&Product_Name=PCI+28&OSName=Windows+XP
http://de.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=864&dlcentric= 976&Product_Name=PCI+28&OSName=Windows+XP
But none of this drivers can be installed. When I start the installation after some time of loading there appears an alert with says:
"Setup wasn't able to find a Sound Blaster Audiocard on your system. Please make sure that your Soundblaster hardware is installed correctly before starting the setup. Setup will finish/exit now."
Does anyone know how to get this card running on WinXp?
Does anyone know some alterati've drivers witch could be suitable for this card and WinXP?
Thx for help!

Go back to the download link and download the Waveset file. After which, follow the steps from this Knowledgebase article SID930 to install the waveset.
Jason

Sound Blaster Live 24-bit PCI Sound Card and Creative Sound Blaster PCI Card not detect

Ok here is my problem. I bought a Creative Sound Blaster PCI sound card a while back and it was working fine but recently when I would boot up my computer and try to play music say off of Winamp it says Bad DirectSound Driver. When I check device manager it shows no sound card there and in sounds and audio devices it says no audio device. Now my brother believed this to be a card fault so we went to Frys and bought a Sound Blaster Li've 24-bit PCI card. I uninstalled the old drivers and installed this new one but yet it's the same problem. My assumption was that Windows XP had something conflicting so I reinstalled the OS. It found the card and I installed the latest drivers?off of this site but now it does the same thing yet again with a fresh install of Windows XP. The card has been in all 3 of my PCI slots and it will detect it for a moment but then acts like as if the card was never installed. Like I never installed a sound card into the computer. The onboard audio has been disabled for a while now but I do not know what the problem could be. I did Scan for hardware changes but it doesn't show up. Sometimes when the card is detected if I do scan for hardware changes and the card is there it will just magically disappear from the device manager as if it was never there. Even when I try to load music and I see the card is detected it will not play the music and ends up locking up Winamp to the point that sometimes will go BSOD. Now I would really like to find out what the issue is because I am planning this weekend to swap out my motherboard with a duplicate board to see if that will end up fixing the problem but I want to find out if there is any other way to fix this issue. Thank you.Message Edited by AuXoIs on 02-25-200808:28 PM

Hmm what other options is there for the bios on PCI slots?Also anything you connect to the motherboard can have oxidization (I think its that) build up on the connection. Check the connector on the card and get a eraser (Pen eraser is better) and give it a good cleaning. The connector might have alot of build-up on it and you can see it by a dark yellowy colour. I cleaned my graphics card and ram connectors after they got alot of the build-up on them. On a older computer my graphics stopped working and this fixed it. Also I went away for a while (like a month) and came back to see that my puter didn't display anything. Opened it up and saw that the graphic card had alot of corrosion? on the card connector and in the slot. Does that if you computer is turned of for a long time. Had a heck of time trying to clean the slot out. One other thing that it could be is the sound card is faulty. I had an audigy 2 and it died a while back . It picks it up and then try and use it computer freezes and the after restart it's not there anymore. Hope it's not that problem. Hope this gives you something to go by.

Sound Blaster Audigy 5/Rx Driver Alternative Download Links

Hi guys,
I have searched online and found 2 alternative download links for the Sound Blaster Audigy 5/Rx driver, SBA5_PCDRV_L11_3_01_0039a.exe.
You may want to download the file at:
opendrivers
phtdownloads

Even using just the CD drivers, shouldn't the applications still work?
right now when I try to open creative speaker settings I get the error:
The Audio device selected by this application is not detected. The application will exit.
Does that mean anything?

Sound Blaster Extigy For Windows 7 ultimate driver

I have sound blaster Extigy Usb sound card but i can use windows 7 ultimate x64 version.

...strange...
at first i tried to put the old driver (for XP) from instalation disk,
then i did automatic search...
and happiness happen...
....may be, you have to choose audio device from list
try

Creative Sound Blaster 5.1 Windows 7 Driver Please!!!!

i recently upgraded my pc from vista to windows 7....the driver cd for creative sound blaster 5. which worked for vista is not working for windows 7...can anyone please ppost me the link to download the driver for windows 7 or atlease tell me how to rectify this problem....its very urgent...i have no sound in my pc....please help!!!!

hi sachinsankar555
if you have 32-bit version you can resolve your issue so easly
just make your driver cd?compatible with windows xp, i?trieded this and it worked with 32-bit
but now i am having 64-bit and it wont recognaize it at all

Creative Sound Blaster Audigy LS "WINDOWS CANNOT DETECT A SOUNDBLASTER HARDWARE" Issue!!!

Hi all to cut the long story short I have had my audigy Ls card for a little over an year now, everything worked fine until I have decided to reformat my computer due to regular maintenance and this was roughlly 2 month ago, anyway I have explored all the different avenues and have found my self stranded to this point. 

Basically I have the drivers (from creative official driver downloading page) for the sound card installed and its running fine however not flawless due to the fact that my original CD that came bundled with the card cannot be installed anymore, ever since I have reformatted my PC. windows just couldn't detect my exisiting AUDIGY LS card and keeps error out when the installation starts and states that windows can not detect a sound blaster card in your system etc etc. 

Now I know for a fact that everything worked fine with the drivers installed correctly without any issue prior to my format. is there any any any any!!! way to actually overcome this nuisance ? Im getting really pissed of as I no longer could enjoy the full benefit of my sound blaster 

e.g creative media centre, sound equilizer, 6/24bit adjustment. 
I have switched the card in other PCI slot, it's no use and I have tried and obviously failed to do everything I could to solve this problem. the onboard sound has been disabled.AC97 and I really couldn't figure out why...strange ...

I have searched the forum for valuable infomation as I seen a couple of people are suffering the EXACT same issue as I'am. 

My system spec is as follows.
Asus P4P800 Deluxe MOBO
P4 3G CPU H. T Enabled
G KINGSTON RAM
6600GT WINFAST GFX CARD



Hi All,
I am pretty much in the same boat but with an Audigy 2 Value Sound Card.
Removed some old piece of rubbish card (6MB Aztech PCI 288 Q3D using a Trident 4DWave-NX Chip.... yes about 6 yrs old !) in my daughters pc and replaced it with the new one.
Same error message i.e. hardware not detected... ihave already posted as im trying to find and install the right drivers. I have also tried the PCI-slot hopping etc etc.
So what next people ?

Wierd issue with Sound Blaster Z and Windows 8.1

I have just started having an issue with my sound card. For the past year it has been working perfectly fine with no issues. There have been no recent changes to the computer, but within the past week, if I am in the middle of a game or listening to music, the computer will once a day lock up, I then have to restart the computer. After it restarts, the right speakers, and only the right will not work, Center, Subwoofer, and Left side speakers work 5.0. I then go the Sound Blaster Z-series control panel and re-enable the surround sound. At this point the Center and Subwoofer cease to work, but the right side works perfectly fine. After a couple of resets the center and subwoofer still do not work. I then have to go to the back of the computer and change the cable for the center / subwoofer from left most to the second left most (as looking at the back of computer from the top side). It will work fine this way with all speakers working, for roughly a day then it will lock up again. I have to go through the same process, but move the cable from the second left most to the left most output for it to work again. I tried for the past two days to troubleshoot by removing all the software and creative drivers. Same issue after reinstalling with a fresh driver set. Any help, because this is completely annoying.
System Stats:
ASUS P6T Deluxe Motherboard
Intel Core i7 965 CPU
Corsair Dominator 3x2 GB
Intel 520 SSD 120 GB
Samsung Evo 840 SSD 250 GB
WD 500 GB (x2)
XFX Radeon HD 7770 (X2)
Sound Blaster Z
Windows 8.1 Pro 64 Bit
Thank You,
Michael Mastro II

Considering that there is already a ca0132 driver for linux, which was made to support chromebook pixel laptop. It should not be hard for creative to make that driver compatible with discrete cards and motherboards that make use of that chip. But Creative seriously dropped the ball on users and does not care about them. I do not understand this, because all previous creative cards are supported in linux. Steam OS and steam boxes are around the corner and Creative is missing a big opportunity.

Sound Blaster 5.1 (windows 7)

I am running the RC Windows 7 and i cannot seem to find a driver for my sound card. I have the Sound Blaster 5. (Model #: SB070).
I'm just wondering if there will be a beta release any time soon? or even better a possible existing driver download.
If anyone has any info on this it will be much appreciated.
Sincerly
Jazzab

! Best I can suggest is the following,
http://forums.creative.com/creativel...hread.id=40948
as I can pretty much guarantee that creative will never release an official Windows 7 (or vista for that matter) driver for that card.

Sound Blaster 5.1 Windows 7 Ultimate 32 & 64 bit drivers

<Hi,
? I Installed [color="#ff0000"]Creative Sound Blaster 5. in my system, now i am using [color="#ff0000"]windows 7, when i am trying to install the [color="#ff0000"]Creative Inspire Drivers, it showing error and i can't acces the[color="#ff0000"] Creative sound Mixer. So, please help me to download the drivers for Windows 7.
Thank you in Advance.......

There are not now and never will be drivers for that card, it is just too old. The only way to get working drivers for it is to use either this,
http://forums.creative.com/t5/Sound-Blaster/SB-Li've-series-Support-Pack--5-08-09-2009/td-p/53386
or this,
http://kxproject.lugosoft.com/
P.S. That card is only 4.0/4., it is not a 5. card.

Sound Blaster PCI Express - No option for AUDIO CREATION mode.

I need help. ?I purchased another computer from Dell, with a Sound Blaster board just as I have done with three other computers. ?This makes four.
I ordered it with the Sound Blaster board because of the THREE MODES, Entertainment Mode, Gaming Mode, and Audio Creation Mode. ?The Audio Creation mode is really what I want because it allows to add reverb.
So when I get this latest Dell with the Sound Blaster card it is a
Sound Blaster X-Fi Xtreme Audio PCI Express
The Volume control does not show the three modes. GAMING, ENTERTAINMENT, and AUDIO Creation. ?It only shows the ENTERTAINMENT mode.
So I thought perhaps those were enhancements that had to be installed from the Creative Sound Blaster CD that Dell provides. ?I put the CD in the dri've, and it goes into install mode and then when you start the install it says do you want to add additional software to which I answer YES.
Then it says install your CD in the CD dri've, which of course it is already in there. ?The CD looks funky. ?No scratches, it is new, but it has an uncharacteristic distortion on the data side so it is probably bad.
I download the drivers off the Creative site and it says, you have a newer version already installed on your computer.
I have called Dell 5 times over the course of 2.5 hours being disconnected all 5 times after speaking to people with extremely thick accents that know as much about computers as I know about brain surgery.
BOTTOM LINE
1.Does the Sound Blaster X-Fi Xtreme Audio PCI Express have the ability to support the three modes: ?Entertainment, Gaming, and AUDIO CREATION.
If so, how do I get it to workHow do I get a new CD
2. If this card does not support the three modes, what card doesThe Sound Blaster cards in my other three Dells all support these three modes.
Thanks!
Doc from Las Vegas

No the Xtreme Audio doesn't not support the three modes, it only has Entertainment mode. Any X-Fi card that is not a Xtreme Audio does support the three modes.

Sound Blaster Audigy 2 ZS - Driver is

Hello,
Recently my creative speaker settings and all my THX controls stopped working. I removed all my drivers, then reinstalled the following from the creative website.
. Creative Sound Blaster Audigy, Audigy 2 series and Audigy 4 series Driver 02.08.0004
This reinstalled the creative media center as well as the creative audio console, but it did not install the Sound Blaster Audigy 2 ZS folder or application etc, which is what has all the Creative Speaker Settings and THX control and all the other creative options. I tried using the driver installation disc which came with the soundcard, but although it shows the creative settings/ THX control installed, whenever i try to open those applications, I get an error message saying that it cannot open that audio device, install audio drivers. I searched for the right drivers and even did the automatic updater, yet it did not work.
So basically could anyone help me find the right driver to download so my creative speaker settings, THX console and all those other apllications will work?
Thanks for your time.

Even using just the CD drivers, shouldn't the applications still work?
right now when I try to open creative speaker settings I get the error:
The Audio device selected by this application is not detected. The application will exit.
Does that mean anything?

Sound Blaster Zx SB1506 ASIO driver

Hi all,
I've been trying to enable the ASIO driver using this article
http://support.creative.com/kb/ShowA...aspx?sid=88833
The only problem is the drivers don't seem to have "Creative Console Launcher"
I installed the entire suite, even applications and I still haven't been able to enable the ASIO driver
http://support.creative.com/products...T=CategoryID:1
Can anyone help me and tell me why please?
According to this link my card supports ASIO
http://support.creative.com/kb/showa....aspx?sid=7358
and apparently creative now has integrated ASIO, so I don't understand why I can't find it

Originally Posted by squall_leonhart
That only applies to XFI's
Sound Blaster Z-series (ASIO support without Direct Monitoring - need to install latest web update).
I installed all updates, I even installed applications I didn't need "Sound server, etc.". I still haven't found a way to enable ASIO support. What does it mean by "without Direct Monitoring"? Does it mean that it's automatically enabled without user configuration? Is there any proof that it's enabled? I'm sorry for all these questions, I'm just trying to understand.

Compatibility with Dell B110 - Sound Blaster Live! - correct driver?

I am trying to put a PCI Sound Blaster Li've! CT 4760 (I think) into an old Dell B0.
Anyone know if it is perhaps NOT compatible? I have an open PCI slot...also Have a NVIDA FX 5200 Vid card in another and my OEM Modem Card in the other. (3 total)
Running XP and not recognizing the card when I put it in and boot.
Any info appreciate to keep this dinosaur running.
Thanks!!

Sorry it is a CT 4780 unit......

Sound Blaster PCI 128 \\ Windows 7 \\ driver

Similar Messages

Maybe you are looking for