Sound Blaster Tactic 3D Wireless

Hello forummembers,
I have my Tactic 3D Wireless for a couple of months and i really enjoy it, but now i have a problem
As soon as i want to charge it trough my Laptop (usb) it doesnt work anymore. I plug in the cable into the headphone and the power button stops blinking, but after +/- 3 sec it start blinking again and hear the 'empty battery' tone again. So i assume it isn't charging. Everything is plugged in corectly when this happens and i tried multiple usb ports in my laptop.
Somebody know whats going on?
Greetings,
Miles

Originally Posted by MilesvanHattem
Hi Philip,
Thanks for your quik reaction!
1. Yes, i'm referring to the Tactic 3D Rage Wireless
2. Nothing special as far as i know.
How do i update the firmware? I am kind of a nitwit on this area
Hi Miles,
Have you tried charging your headset with an external USB adapter?
For your reference, here are a few of our KB articles that you can browse through:
- How to charge the Sound Blaster Tactic3D Rage Wireless headset
- How to Install the Sound Blaster Tactic3D Rage Headset
Cheers!
Philip-CL

Similar Messages

Cant hear any audio from Sound Blaster Tactic3D Rage Wireless headset

after getting the Sound Blaster Tactic3D Rage Wireless headset i red through the booklet inside and saw that i could download software for it so i went to the address it gave me and downloaded the firmware for windows and after it was finished and i had restarted my computer the headset and USb connector would both flash nonstop. as well as this i cant hear any audio from the headset. help me if you can

Just discharge it and then charge it. Should work then, and never ever try those firmware updates they are the terrorists of these headsets

Sound Blaster Tactic3D Wrath Wireless

Hello,
Seem to be having an issue with my headset, the Sound Blaster Tactic3D Wrath Wireless. I've had it wired up to charge now for that past 12 hours or so but decided to watch a movie whilst the headset was charging (Watching the movie with the Headset on giving me sound). Now the Headset has cut out and every time i press the power button, it comes back on for a few seconds then cuts out again.
Anyone got any ideas on what the problem is?
Regards,
Gerard

Hi guys,
I've had this problem today. When i was flashing TX firmware then wifi transmitter unplugged and firmware installation was interrupted. Now wifi transmitter doesn't work. How can i fix this problem

Sound Blaster Tactic Rage Low Volume Microphone

Hello,
I've recently purchased the Sound Blaster Tactic 3D Rage, and have found that the microphone volume is extremely low despite updating drivers and setting microphone volume to 100. The quality of the microphone is acceptable, it's just the volume is low, whether its in Windows, or Skype.
Thanks,
Royal-Mist

Why don't you try to get the sound from your TV's 3.5mm headphone out or RCA output instead and use your TV's volume control to increase the volume. But you have to output your sound from your PS4 to your TV via HDMI.

CS:GO Sound Blaster Tactic 3D Rage profile

Hello, I have Sound Blaster Tactic 3D Rage headset. Maybe someone can send to me, some CS:GO, profiles? I really need it, like from you (PROS).
Thank you
Rokas.

UP

Sound Blaster Tactic3D Rage Wireless - Driver and Firmware update, now it's frozen?????????

Just recieved my headphones yesterday - plugged it in and charged it = works. I then decided to download the newest drivers and firmware and went straight to bed. This afternoon, suddenly no sound is detected, what so ever! The USB Power LED flashes slowly and a constant red glow is showing at my headphones.. When I try to re-pair it, the USB Power LED flashes rapidly as it should, but neither the Mic Mute button, nor the Connect Button on the headphones responds.. It feels like the headset is simply just frozen right after the new driver/firmware installation.
I've tried everything pretty much.. Went from Wireless to USB to see if that helped, but it didnt. Tried to remove / setback the drivers, still dosn't work. Headphones is just completely frozen with no buttons working and a constant red glowing light - can't be turned off or restarted!!!
WHAT TO DO?!?
Cheers,
Alexander

My headphones just ran out of power during the day = it resetted itself. I then connected it again and re-paired it. Atm it's working perfectly fine again. I will now try to reinstall the Control Panel, not the driver though, hopefully it will work this time and wont make the headphones go into "non-responding-retarded-mode" once again :-)
Conclusion: For me it felt like it was either the Drivers or the Firmware update, maybe both, which made my headphones "crash", or atleast not respond to any command / buttons pushed. If anyone faces the same or similar problems as me, due to installation of drivers/firmware, let your headset run out of power (if you as me, don't know how to remove the battery manually) and just reconnect it :-) Should work then.
- Alexander

Creative Sound Blaster Tactic3D Rage Wireless crackling sound

Tactic3D Rage Wireless crackling sound all the time when playing any sound on the headset.
Work OK on laptop and other PC in the home. Just not my PC lol. Motherboard: Zotac H55-ITX Wifi. CPU Intel i3.

Pauleley,
Welcome to the forum!
Sounds like an "interference" issue to me. Definitely not an issue with the headset as it is working perfectly fine on another machine. The transmitter operates in the 2.4Ghz frequency spectrum so you might want to check out what other devices runs on the same spectrum near to your computer (just a thought).

Sound blaster tactic sigma3d mic

hello, i've had my sigma for almost a year now and i barely used my mic. the mic doesn't work anymore and i don't know whats the problem.my computer doesn't detect any sound when i do mic tests but the computer recognizes that the mic is connected. could you help me and try to help me find out whats the source of this problem? thanks.
EDIT: i barely use my mic and i leave it in my headset and i only take it out every often. (last time i took it out was 4 months ago)

same problem, always freezes and have not been able to get it to work

Sound Blaster Tactic3D Omega Wireless PS3 issue

I don't know if I am the only one who is having this issue, but the headphones works fine on PS3 EXCEPT some games like God of War, Evil Within, Journey, Wolfstein, Sniper Elite 3 , what the hell !!! these games support Dolby Digital 5.1 but there is no sound on my headphones
Does anyone here know the solution for this, I am aware that this headphones doesn't support DTS which I wasn't aware about when I first bought the headphones , or AC3 audio format when I play videos on my PS3 , But hey DTS does work on PC which I can't find explanation for this

Hi Eyadisho,
Check out this article on Creative's support site. Maybe you can try to select Linear PCM 2 Ch. 44.1 kHz and Linear PCM 2 Ch. 48 kHz output for audio as stated in the article.

Sound Blaster Tactic3D Rage Wireless Firmware update fail

Hey guys,
As the title says, I have a bit of a problem. I just bought the Tactic3d Rage Wireless headset, and decided to update the firmware as I like to have the latest drivers when I get started on new hardware. So I update the transmitter while the headset was turned off. No problem.
Then when it came to the headset I removed the transmitter and plugged the headset directly to the computer and started the appropriate application. At the end of the upgrade it said it failed to load the system after the new drivers was installed or something similar, and now it's just there flashing blue all the time. It doesn't respond to anything, and if I try upgrading the firmware again it says it can't find the headset.
So I'm wondering A) Did I do something wrog here? and B) How do I fix it? Is there a way to restore the factory settings of the headset somehow?
Please help! Thank you in advance.

Hi guys,
In an effort to centralize similar topics within our forum threads, I am closing this thread.
Kindly post on the centralized thread (link below) for your concerns/ solutions to this particular concern:
soundblaster tactic3d rage
Cheers!
Philip-CL

The installation cd for the Sound Blaster creative Wireless Mu

hellocan anyone send me the installation cd for the Sound Blaster creative ?Wireless Musicmy e-mail is:
[email protected] and you can also send it to http://www.yousendit.com/?and give me the link for download fileplease your helpthank you very much

Try this thread.Message Edited by Katman on 03-22-200605:55 PM

Sound Blaster Sigma config

Hi all....
I have a simple, and probably stupid, question.....
I bought a Sound Blaster Sigma headset some days ago and still have a sound blaster X-Fi Extreme Music sound card.....
To have the better 360° 3D audio, have I to use the X-Fi sound card or the USB sound card that comes with the headphones? Which is better (not only in terms of audio quality, but specifically for 3D gaming audio)?
Hope that the X-Fi is good too......hope it's better also....
Sorry for my english....
Thx in advice for the answers....
Cya

The following is the responses I have received from Creative customer support regarding the THX controller software NOT working (the controller software just hangs) with my X-fi Platinum. I am very confused by the contradicting responses help please!
Detailed Problem Description:
Ok I have installed the Alpha/Sigma software and the cotrol panel just hangs when it opens. I uninstalled, reinstalled in safe mode, restarted, ran update with the same results . . . WTF these are sold as high-eng! I have been in tech support, I am a Intel Product Dealer, and a MS System builder for years. Windows 7 prem 64, Creative SB X-FI Titanium . . . seems like the head set should work with this. Please help...
Thank you for contacting Creative Technical Support.
Are you connecting the headset thru the 3.5mm plug or USB connection?
If using the USB headset connection, please note that you won't be able to use it with the X-fi Titanium soundcard.
Please follow the steps carefully below when installing Sound Blaster Tactic3D Sigma in your Windows 7 computer.
http://support.creative.com/kb/showa...aspx?sid=81537
Solution ID: 81537
How to Install Sound Blaster Tactic 3D Sigma in Windows
The driver for the headset is Sound Blaster Tactic3D Sigma Pack for Windows 1.01.0001.
Download link: http://support.creative.com/Downloads/searchdownloads.aspx?strString=SBTS_PCDRV_LD_1_01_ 0001.exe&Sho...
Requirements:
* Microsoft® Windows 7 32-bit or 64-bit, Windows Vista® 32-bit or 64-bit with Service Pack 1 or higher, Windows XP Professional x64
Edition or Windows XP with Service Pack 2 or higher
* Sound Blaster Tactic3D Sigma
Notes:
* To install this pack
1. Download the file onto your local hard disk.
2. Double-click the downloaded file.
3. Follow the instructions on the screen.
Hope this helps.
We apologize for any inconvenience caused. Thank you for your patience and understanding on this matter.
Please retain all the previous correspondence when replying to this email.
Best Regards,
**bleep**
Worldwide Customer Response
Creative
Thank you for answering,
I can use the mini jacks but not the features I bought the headset for? The mini jack functioning of this headset seem no better than any $25 headset . . . and I have spent years plugged in in recording studios.
So the features of this headset are not available if I am using your High-end soundcard?!?!?!?!? How is this possible?!?!?!? And why does the box not say this???? Now that I have spent hundreds of dollars on your soundcard and nearly another $100 on your headphones I am just out of luck!!!???
I think this needs a website of its own. What am I to do with this useless waste of money at this point?
So, please, tell me what I am to do?
And please send me contact information for the marketing product leads for both of these products!
Awaiting a reasonable answer,
Thank you for writing to Creative Technical Support.
Please note that when in USB connection, USB devices such as your SB Tactic3D Sigma Headset will create its own USB Audio Device and it will bypass the onboard sound card and the X-fi Titanium card.
Make sure that the headset is properly detected in Device Manager and selected as the default playback and recording device.
When using the mini-jack, please ensure that the X-fi Titanium card is selected as the default playback and recording device.
Thank you for your patience and understanding on this matter.
Please retain all the previous correspondence when replying to this email.
Best Regards,
**bleep**
Worldwide Customer Response
Creative
PLEASE READ YOUR OWN PRIOR RESPONSES YOU ALREADY SAID IT WON"T WORK!!!!!!
Mod notes: Advisor name removed.

Sound Blaster X-Fi Notebook Express Card and Wireless Recei

I?purchased a Creative Wireless Recei'ver and a Sound Blaster X-Fi Notebook Express Card. At the risk of removing any doubt that I am an idiot, what is the purpose of the square piece of stretchy black material? It was nicely packaged, but I don't know what I'm to do with it. It's about 4 inches square and stretchy, like spandex. I sent an email to Customer Service. They have no clue and advised me to call Direct Sales. They don't know what the purpose of the cloth is either. Any ideas?

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

Sound Blaster Z Digital Input Question

Hi,
Problem: PS4 connects via HDMI cable to my speaker-less monitor, cannot connect the PS4 to my stereo system since there is no separate analogue connector to use (there was on the PS3 but not on the PS4) and my stereo does not have a Digital Input connector (it's old).
Solution?: If I get hold of a Sound Blaster Z, can I connect the Digital Output from the PS4 into the Digital Input on the SBZ and therefore output my PS4 sound through my PC?
This is a relatively cheap solution for me so I would really appreciate it if you guys could give me a heads up on whether this is possible. Apologies if this is a straightforward/dumb question. I want to doublecheck before dropping the cash.
Thanks for reading,
-Yosh

Originally Posted by Yosharian
Hi,
Problem: PS4 connects via HDMI cable to my speaker-less monitor, cannot connect the PS4 to my stereo system since there is no separate analogue connector to use (there was on the PS3 but not on the PS4) and my stereo does not have a Digital Input connector (it's old).
Solution?: If I get hold of a Sound Blaster Z, can I connect the Digital Output from the PS4 into the Digital Input on the SBZ and therefore output my PS4 sound through my PC?
This is a relatively cheap solution for me so I would really appreciate it if you guys could give me a heads up on whether this is possible. Apologies if this is a straightforward/dumb question. I want to doublecheck before dropping the cash.
Thanks for reading,
-Yosh
Hi Yosharian,
Do you want to consider getting the Recon3D USB instead? The price is almost the same as the Sound Blaster Z and it can function alone without the computer. You may be able to save on your electricity bills using the Recon3D USB instead.
Here is an illustration of the Recon3D Omega Wireless connecting to the PS4 using SPDIF input. The Recon3D Omega Wireless is actually the Recon3D USB with a Tactic Link card connected to it and a wireless headset.

SB04100 Sound Blaster Card not working after computer rebuild

=SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
Everything works for now -- I'll be glad to get this particular computer out of my house !

Sound Blaster Tactic 3D Wireless

Similar Messages

Maybe you are looking for