SOUND BLASTER X-FI PLATINUM - MIC NOT WORKING... NEED ANSWER

I used to use a crap $50 mic and everything worked fine on my SB setup. Now that I have a real deal studio mic. It doesn't detect it at all. I've tried re-installing. I've tried all the inputs. No luck...
DOES ANYONE HAVE A SUGGESTION...
My system runs as is...
WINDOWS XP (OPERATING SYSTEM)
SOUND BLASTER X-FI PLATINUM (SOUND CARD)
ADOBE AUDITION 2.0 (SOFTWARE)
AKG PERCEPTION 200 (MICROPHONE)
HELPPPPPPPPPPPPPPP!!!

It needs 48 VOLTS Phantom power(phantom power supplied by whatever? equipment it is plugged into..........)...........You cannot expect a soundcard to supply 48v phantom power if there is no 48volts to start with.Mixers and the like usually have "phantom power"supplies built in to power condenser mics.Soundcards also supply the power for regular headset mics and desktop pc mics via the mic socket(jack).A soundcard cannot and will not supply 48 Volts. IF I tried to connect a condenser mic(not headset or desktop)to a soundcard via a XLR connector into a stereo jack plug(adapter), where do you think the 48 Volts would come from?If a condenser mic does not have a battery inside or is not a low voltage one that takes it's power across the mic jack on a soundcard then it aint gonna work.How do you think a headset or desktop mic works?on fresh air?It takes enough power(volts)from across the power rail that supplies the soundcard. I'm an audio/electronics egineer so I should know.Message Edited by musicman53 on 09-02-20070:30 AM

Similar Messages

Sound blaster audigy ls series MIC NOT WORKING

i have a soundblaster Audigy LS series. with an asus m2n sli delux motherboard. i also have a 9800gtx+ graphics card with 2gbs of ram. oh and i have a 3.0 dual core 64 athelon x2 processor. recently my microphone jack has stopped working, and i've changed the mic several times and the mic jack still does not work. i am honestly stumped and confused because i play alot of online games and talking is vital when your trying to communicate with teammates.
i would appreciate any help.
thanks.
-Dominic

Dominic,
Sorry to ask the obvious, but have you checked that you have microphone unmuted in the Creative mixer, the volume is set high, and that the REC source is either WhatUHear or Microphone? You didn't mention your operating system, but assuming XP, in Control Panel, Sound and Audio Devices, Audio tab, is your Audigy the default recording device? And while you're there, see if the box next to "Use Only Default Devices" is selected. If not, you might want to consider putting a check mark in it.

Front I/0 panel on Sound Blaster Audigy 2 Platinum ZS not fo

The front I/0 panel on Sound Blaster Audigy 2 Platinum ZS not found by Creative Volume Control Application. Under recording sources, I can only choose from "What you hear", MIDI Synth, S/PDIF-In, CD Digital, Analog Mix (Line/CD/Aux/TAD/PC), Microphone and Wave. The option to record from anything on the front panel, (Aux-in 2, Line-in/Mic-in 2) have disappeared. I have tried re-installing the software from scratch, just installing Creative Update components and even formatting the hard-dri've and re-loading Windows but it still doesn't work!!?Does anybody have any helpful suggestions on this frustrating matter?

If you're using a dynamic microphone, the Audigy 2 ZS dri've bay has a jumper which you can change for it to support dynamic microphones instead of electret microphones. However once this is done you won't be able to use electret mics until you've changed the jumper setting back.

Sound Blaster Rage VoiceFX Test button not working

I purchased my creative sound blaster Tactic3D Rage headphones today and so far I am really happy with them. The only thing that bugs me is that the test button for VoiceFX in the control panel doesn't seem to work. I press it and talk through the mic, but nothing happens. I know the VoiceFX works because I tested it out through Skype test call. Only the test button in the control panel doesn't seem to work

Originally Posted by dinopkk
Hi Cavegraffitti,
Since you have tested it on another computer with the same result, there may be a problem with the headset. But do you want to try to do a hardware reset to the headset? It will reset the settings on the headset and maybe fix your problem. This website contains steps to do a hardware reset for the Sound Blaster EVO Zx and it can be used for the ZxR as well.
If you have not updated your headset's firmware you may want to give it a try as well.
I can now confirm what the problem is. After reformatting my whole operating system I was indeed able to get the software to work properly again, however after a windows update the software will not work properly again. Confirmed same thing about the windows update on my other pc as well and the only way to get it to start working again to to do a system restore point before the last update.
I am sorry but this is unexceptionable! So I have to stay on an old version of windows in order to use this product...
I want a full refund please.

Sound Blaster Arena Gaming Headset: Microphone not working. Please help.

I am using Vista. I have used Creative Software AutoUpdate and all my drivers are up to date.
So I had the set for about month before tonight I plugged the detachable microphone into it. Its as if it doesn't exist. When I go to sound/recording It shows: Headset/SB Arena Headset/Working. It is set as default. But it doesn't specifically say microphone. Just the headset stuff. The line volume is at 00. But when I talk into it... Nothing.
A look at the Arena FAQs turned up this:
"Are there any indications that the microphone is working?
You should see an orange circle light at the Inline controls. If this orange light blinks, it indicates that the microphone is switched off."
Google searched for Inline controls and I'm still not sure what they are. I've never used a gaming headset before so the trick to this could be overly simple and I'm just not seeing it. Its really starting to tick me off though. Did I just get a brick set and now its to late to return?
I even tried uninstalling my mobo audio drivers. That didn't do anything. Tried using windows audio recorder. Nothing.
Please help me.

Hi,
Please download & reinstall this driver and see if helps. If it is still not working, please write to our Customer Support for further assistance.

Sound Blaster Arena Headset Volume Buttons Not Working

Just as the title says. The Volume control buttons on the cord are not working. The lock and unlock for the mic is working, but I've tried all the suggestions I could find in the support website, but the volume buttons just arn't working. Any help would be greatly appreciated.

Kakiro wrote:
Just as the title says. The Volume control buttons on the cord are not working. The lock and unlock for the mic is working, but I've tried all the suggestions I could find in the support website, but the volume buttons just arn't working. Any help would be greatly appreciated.
they are not faulty mine are doing the same thing on windows 7 64bit. try it on xp they work fine. it is the stupid driver support of creative. They don't care about the customer

Sound Blaster Z Speaker/Headphone switch not working

I have had my soundblaster for 6 months and everything has worked great.
After a recent driver update (I have already tried rolling back the driver) I found that my speaker/headphone switch does not work properly. It enables the headphones but doesn't disable the speakers. I use the optical out on my card and it has worked flawlessly until now.
Suggestions?

Remove the old drivers (carefully) in Safe Mode and install the new drivers in Normal Mode.

MSI 648 MAX + Sound Blaster Audigy 2 Platinum

Hi.
I have a big problem because my sound blaster audigy 2 platinum doesn't work with this mainboard. When i start any sound blaster program my pc freezes.
What can i do?
Excuse my english
Thank you

Follow this steps
1) Unplug your External Creative Card
2) On computer
3) Go to Bios
4) Set Bios of AC97 to AUTO
5) Reboot
6) If you are using win98, go to the control panel, system, Device manager, click "disable in this hardware profile".
8) Restart computer
9) Off computer
7) Slot your Audigy........everyting should be fine.
If problem stil persist, I can still help you but it is going to be very troublesome.
*Note before you do step 1 remove your AC97 driver first*

Sound blaster Audigy 2zs platinum setup with creative inspire 5.1 digital 5

what should the setup be for the sound blaster Audigy 2zs platinum and the reati've inspire 5. digital 5500 because with the decoder in i only get center fl fr on games. i dont get sound from the rear speakers.but when i take the decoder out and just plug the 3 leads straight into the back of my sound card i get 5. any help plz.i done a thx sound test with the decoder in it does fl i can hear it but i can hear the center as well
and no sound comes out on the 2 rear speakers when doing the test.but when puting the 3 cables straight into the back of the sound card i runed the test and i could hear all the speakers fine even the rear speakers any help plz is this ment 2 happen or do i have to change some settings thanks for any help plz help me thanks.

I Have had a problem for ages. I have the Audigy 2 ZS Platinum and Inspire 5. digital 5500.
I have copied the advice I received/didnt recieve from creative.
Best of luck
Dear Martin
Thanks for your reply
I am sorry for the problem you are facing.
To achieve outputs from all the speaker during speaker test, you will need to have an analog connection, or digital DIN connection.
That will be possible if you connect the three line out jacks on your soundcard, to the three audio input (analog jacks->green,black,orange) on your speaker, if it has this connection. Or, you may connect them using Digital DIN, if they have this connection.
If you are using digital connection (coaxial, optical), there will be no way to achieve sound output from all the speakers during 5. speaker test, as they carry stereo signal.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe:
Original Message Follows:
Hi
I understand you must be busy, so no problem.
No I do not hear EAX when in Pro-logic mode. I only hear (depending on the game in question)
Half life two: front left-right and centre. NO rears
Fear: Front, left, right, & centre. No rears
Farcry Front left, right & centre. No Rears
When I run your speaker test HISSSSS, No Rears, no front left or right
Beats me?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 24 January 2006 5:44
To: Martin
Dear Martin
I apologize for the delay on the answer.
If you select Dolby Prologic mode on the decoder, are you able to listen
the game audio, with EAX, in all of the speakers?
Regarding to the optional bay dri've, you can purchase it from ou
Best Regards
(Mod Note: Name Removed)
Original Message Follows:
Hello
Your email was helpful, unfortunately, not for my unit, you see I would
have
connected the Jack leads in by now if the inspire had Jack lead inputs
as
you describe
Please don't think I am being sarcastic, but from reading the
correspondence
below it would seem as if your department is having difficulty
understanding
my problem.
Also it would seem your department doesn't have the necessary technical
information on your very own product, so to help with your dilemma I
have
taken photos of the input/outputs on the Inspire unit.
You will clearly see the inspire has no inputs other than Coaxial and
Optic.
This leaves me back to my last post. I think the solution would be for
me to
purchase the correct processor, which would have come with the original
sound card had I not been a little tight on the money front.
I have attached a photo of the sound card with the processor, I would
love
to buy this processor but find myself unable to locate this product on
your
web site. Would you possibly be able to send me the correct link to this
item so I can buy this Processor Please?
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 8 January 2006 0:3
To: Martin
Subject: RE: CLE -
Dear Martin
Thanks for your reply
Your soundcard is Audigy 2 ZS
Your speaker is Creative Inspire 5. Digital 5500
You will need to have a 3:3 cable(with the color green, black, orange)
to connect your soundcard to your speaker, to achieve the 5. effects
with games.
Below is the connection:
- Connect line out jack of Audigy 2 ZS
to 'Front' of Creative Inspire 5. Digital 5500 using the green color
connection
- Connect line out 2 jack of Audigy 2 ZS
to 'Rear' of Creative Inspire 5. Digital 5500 using the black color
connection
- Connect line out 3 jack of Audigy 2 ZS
to 'Center/Subwoofer' of Creative Inspire 5. Digital 5500 using the
orange color connection
Once you have done the correct connection, play the game DOOM3.
Ensure you have selected either the EAX or surround option in the game
settings.
Does it work?
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
You have lost me. Your sound card clearly states that I can have EAX
surround decoding from the sound card I have purchased.
All of the games on your web site claim to give me an environmental
effect
that will blow my mind, hence EAX.
All I have done wrong is NOT buying your decoder that comes with the
sound
card. My mistake.
All I want to do is re-address this issue and buy the correct
decoder/processor.
Can you point me to the correct link on your web site so I can buy the
correct decoder/processor?
As for the PCM out of the above cables, this foxes me as my other
equipment
only use Optical cabling on my Lexicon processor and from that I have DD
7., DTS 7. and meridian 5. lossless.
My issue is more to do with NO EAX from the rear and centre channels
while
in-game.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 09:3
To: Martin
Subject: RE: CLE - Technical Support Request (KMM887805I6636L0KM)
Dear Martin
Thanks for your reply
All commercial digital connection eg. optical or coaxial cable will only
carry PCM stereo signal. If you want to output the signal to a surround
5. with extra EAX environment effects, it will not be possible at all
since it is only restricted to stereo channel signal.
As per current industry limitations, we are bound to follow the standard
one-signal output for all our SPDIF and Optical output jacks. This is
something that is currently shared by all vendors for all products.
Please note that all games are not dolby digital, even they are , it
will require certain motherboard to encode it to dolby digital signal,
which our soundcard does not support.
You can only use analog connections to gain true 5. surround for
gaming..
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
Hi Joong
I don't fully understand your email, but I do get the gist of what
you're
saying and understand I need to connect the analogue cable to fully
appreciate the sound in EAX.
Would you be able to tell me what product I could buy from your
catalogue
which would marry up with the sound card I have, as I understand now
that
the Inspire 5. will not do the job.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 04:00
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8875697I6636L0KM)
Dear Martin
Thank you for the reply.
Computer games written with support for 3D audio do not require a Dolby
Digital Interacti've Content Encoder (DICE) to output multichannel sound,
with no exceptions. Sound devices that support the real time encoder
technology from Dolby will simply receive the multichannel wave file
output and encode it in real time to a somewhat modified Dolby Digital
bitstream. Creative does not support the Dolby Digital Interacti've
Content Encoder on any of its sound cards.
The only difference between a Sound Blaster card and an audio card that
has a real time encoder, is that you can make a one-wire, digital
connection from your audio card to your home theater receiver and enjoy
discrete multichannel sound from the game. However there will be a
continuous, slight delay, known as "latency", as the encoder is creating
and transmitting the bitstream, and of course the compression scheme
being used is "lossy" (i.e. not bit-accurate).
If you want to enjoy 3D audio in 3D enabled PC games in multichannel
surround sound with a Sound Blaster card, it is recommended that you
connect the analog outputs of the sound card directly to the analog
inputs of the receiver. This will require 3 cables for 5. surround
sound, one for front right and left, one for rear left and right, and
another one for front center and subwoofer. Though it requires more
cables than a real time encoder system, it will not have any latency
issues. When connecting PC audio to a home theater receiver, Creative's
latest sound cards such as Sound Blaster Audigy, Sound Blaster Audigy 2
are likely to provide higher quality audio than any Dolby Digital real
time encode system available for the PC today.
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Please do not use this link to submit technical queries
Original Message Follows:
Hi
One particular game which has "in-game" DD is Farcry; I used this as my
benchmark disc for DD and to push my Nvidia 7800 GTX GPU's (I have tried
it
on friend's machines and they get the full surround effect so I Know
this
version is ok. I also have ALL of the game patches & updates.
I would like to point out that while playing Doom 3, Half Life 2,Fear,
Colin
McRae rally 04,FIFA 2004,Meddle of honour pacific assault, Rome, Shadow
ops, All these games have EAX HD, which is enabled within the options
menu
"in-game", But I do not get ANY use out of the rear's and I might as
well
listen in stereo.
No, inspire 5500 does not automatically switch while "in-game" when DD
is present as you would expect, but does if it was a Movie, which makes
me
think the DD stream isn't getting to the processor.
I originally thought I could put all this to rest if I could buy the
control
panel that would have come with the Sound card if I had not tried to
save
money, but every time I search your accessories site I get completely
lost,
it really isn't user friendly, the sub-menus are very time consuming and
point you in the wrong direction because they are not categorised as Joe
public would understand
I downloaded your TEST Movies and creative demo player utility, ran it
but
still no EAX HD or DD if that were present.
I want to put this card and Processor into my boys computer (which is
the
same Spec as mine and I will update to the FX series, but I am unwilling
if
I cannot find a logical reason why this set-up cannot work first.
Would it have anything to do with the pins on the Digital out on the
sound
card plug, the one I bought and was attached to the last email? Only
sending
certain channels down to the processor?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 5 January 2006 08:09
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8868993I6636L0KM)
Dear Martin
Thanks for your reply
Your speakers are fine as you mentioned that there is sound from all the
speakers when you are playing movie.
May i know what game are you playing when there are no sound from the
rear speakers?
Have you done the appropriate settings in the game to achieve the 5.
sound?
Is there any game patches that you will need to update?
Does the Dolby Digital LED light up when you are playing the game?
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Servic
Original Message Follows:
Hi
I am sorry; I should have said the Inspire 5. was model number digital
5500
S/N SW330030026.
The inspire has these connection on the back of the processor
>From top/back of unit
Audio Outputs
Front
Rear
Centre/subwoofer
Audio inputs
Audio line in
Coaxial
Optical
DIN
The Din to a remotely located Subwoofer which has the speaker leads
inputting into it. Plus power.
Attached is the creative view of the controls menu and I have attached
the
invoice I was sent, it shows the lead I was told to fit.
As I said, I can now hear DD5. while within a movie from ALL speakers
BUT
no sound from rears during IN GAME DD5.
I do not use this PC for films only games.
Regards
Martin
If you are having a digital connection, it is normal for only get only
front left/right is you use the speaker test option.
http://us.creative.com/support/kb/article.asp?l=3&sid=4858
Speaker test only outputs from two front speakers?
You mentioned that that you are unable to get any sound from the rear
speakers when playing game right? May i know are you using a digital
connection? May i know what speaker settings have been made under
Creative Speaker settings?
Do get back to me on the above.
Thanks
Original Message Follows:
Operating System: Windows XP Professional x64 Edition
Creative Model Number: SBO 350
Computer Brand/Model: home made
Processor/CPU: AMD 64
Memory: Gig DDR 4
BIOS Type/Revision: 5. 39
System Board/Chipset: ASUS A8N-SLI Deluxe
Detailed Problem Description:
I have the above Sound card.
I also own Inspire 5. amp/processor
I Wanted to save money by connecting above sound
card to amp/processor
Connections on sound card made life very difficult
I contacted Creative for help. you told me to buy
an RCA to mini jack cord which also has other connections, from your
web site, (I tried to find
the product number for you, but your sub-menu
system is so poor I couldn't locate the RCA/mini
3.5 /to phono link for you) this cord connects
directly into the digital in, on the sound card (3.5 Mini jack) to the
coaxial input on the
inspire 5. amp/processor.
I have enabled ALL sp-diff settings and digital in
setting on every program/utility/kitchen sink and all.
I have an SP-Diff wire from DVD burner to creative
sound card, and yes its enabled and digital only
is selected.
I can play a DVD and see the inspire 5.
automatically change from Pro-logic to Dolby
digital when it See's an AC-3 stream.
when I try and play ANY game you say has EAX
,2,3,4 I cannot get any sound from my rear
speakers (see above in Dolby Digital ALL speakers
work correctly)
when I enter the set-up menu within the creative
software you supply with the sound card and select
5. speaker, digital only, test the speakers via
the white noise function, all i hear is left and
right noise. no centre, no rears.
I phoned you tech support line, the boy on the
phone didn't have much of a clue about your
product and I had to tell him what connections sit
on the inspire 5. series amp/processor.
I want to build another PC for my son, I want to
add the FX series sound card and amp, but i am not
willing to buy anything until i feel you have
helped me to solve this problem first.
please can you help, I am at the end of my tether
with this sound card.
kind regards
Martin Waite
Message Edited by Daniel-CL on 0-28-2006 :36 PM

Creative sound blaster x-fi platinum is

hey guyswill my new creative sound blaster x-fi platinum be able to connect to my motherboard?firstly, i dont think the cable that comes with the card will connect to my motherboard, is that true? it is an A8N-SLi Premium?also, even if i dont use the front plate, how do i get the soundcard itself to work? I install the drivers but when i try to run the audio console it says "the audio device supported by this application is not detected - the application will exit"any ideas because for this much money if it doesnt work that would suckthanks guys!bobso

ok i've done what you said.i disabled the onboard chipset and put the card in the outermost slot and the soundcard works nowhowever, i tried to connect the front panel and had issues. i used a completly blank IDE cable that has no 'key' pins (only red ribbon on pin ) and once connected (power and everything) when the computer boots it doesnt get past the IDEchecklist thing - i know it is the front-panel at fault because when i disconnect the IDE cable from the mobo then it gets past that point and does the IDE check...do you think the front-panel is at fault or the IDE cable... it is a very old cable that has been stored in an old box with lots dust...really not sure, would like a hand thanks!bobso

Sound Blaster X-Fi Platinum + What You Hear

Hi All,
I'm looking into picking up a Sound Blaster X-Fi Platinum or the X-Fi Platinum Fatalty Champion Series card... However after recent frustration loosing the "What U Hear" option on a old Audigy SE running under Windows Vista, I am a little unsure!
My question is: Do the X-Fi Platinum or Fatalty Champion Series cards have the "What U Hear" recording option like it did with previous older Creative cards? *I am now back using Windows XP*
Also, are the 2 mentioned X-Fi cards much cop when it comes to music production?
Many thanks

Well looking over [url="http://www.xbitlabs.com/articles/multimedia/display/creative-soundblaster-xfi.html">here[/url]?you see the Creative SoundBlaster X-Fi Sound Card Family Review.
Note...[*]ASIO 2.0 support at 6-bit/44.kHz, 6-bit/48kHz, 24-bit/44.kHz 24-bit/48kHz and 24-bit/96kHz with direct monitoring.<?
ASIO 2.0 seems a different ball game all together.
We know that not all those card will NOT give you What U hear in Vista, so I think it's bad to get the terms confused.
You can find the same on some USB eternals as well, and I've yet to see one than that can do mix (What U hear)
I?suggested to?creative in another thread if they could supply this information rather than let someone buy the card to find out it doesn't.
Worth noting that creative have stated what cards can do What U hear in Vista tho.
The What U Hear recording option is supported in Windows Vista for Sound Blaster X-Fi series (Excluding Extreme Audio series) and Sound Blaster Audigy series (excluding Sound Blaster Audigy LE, SE, and Audigy Value).
Some of those card will with older drivers though.
This whole Stereo mix thing has become a total sham, and is not provided on most new laptops with vista and creatives external solution ( X-Fi Xtreme Audio Notebook) doesn't give it in Vista but it does XP but you CANNOT do voice over music with it as you have mic control and it mutes the mic.
I suppose it depends what we use mix for though....some people just want it to record from the web, so they are not bothered about the mic, but if you want to do voice over music (karaoke or DJ) it's no good.
I could give you a link to a forum where people are cursing the lack of mix, and I can see it getting worse as people get new PCs with Vista on.
Sorry I went off topic, but I needed a vent over this as I often get asked by people "what should I buy" and I can't find the answers!
Come on Creative!!!!![/list]

Sound Blaster X-FI (Platinum) - Sound Channels resetting with several programms.

Hello, I got a Sound Blaster X-FI Platinum installed with the newest final drivers and using this card with XP-Home SP 3.
Under the Volume Section I can manually select how much volume I need on the soundchannels from -8, well I did my own specific configuration for me with adjusting the channel volumes for each.
When I start Power DvD (7 or 8 Ultra doesn't matter) or I make a MSN call, all the sound channels are resetting to the default value... and I have to adjust it everytime new...
Is this a bug or what can I do to resolve this?
Really need help... its really annoying to reconfigure it everytime !

UPDATE:
Ok, so I tried to uninstall it all again and the computer froze up so I restarted it and windows "found new hardware" again and i let it do this:
<img alt="" src="http://img.photobucket.com/albums/v609/darrennicole259/de9d28b.jpg">?
It hung up there a little so I went to uninstall the X-Fi again because of it not responding last time and it uninstalled successfully. SO now when that screen closed I got this message:
<img alt="" src="http://img.photobucket.com/albums/v609/darrennicole259/3fe66b89.jpg">?
I don't know if it is going to work or not now, but I am going to restart the computer. I do not have anything from the disc installed so we'll see what my device manager looks like and see if it is working...

Sound Blaster X-FI Platinum Installation H

Hi, I am a new user here. I am having problems installing my new sound card and getting it running. I have the Sound Blaster X-Fi Platinum with the I/O Bay and cannot get it working. I installed it into my computer, connected the ribbon cable from the sound card itself to the I/O bay and power and it is physically installed correctly I believe.
I have a home built comptuer but this is the system information:
ASUS M3A Motherboard
<img alt="" src="http://img.photobucket.com/albums/v609/darrennicole259/58d2eef.jpg">?
I follwed the installation instructions and clicked cancel on the "found new hardware" prompt and installed from the CD itself. It is installed without trouble but when I try to use it it says:
<img alt="" src="http://img.photobucket.com/albums/v609/darrennicole259/33c5f73.jpg">
So then I decided to uninstall everything and try it again. I got the same problem. I then decided to check my system information and device manager. There was 3 conflicts total. I resolved 2 of them, they were not related to the sound card, and the final conflict is just the soundcard. Here is the list:
<img alt="" src="http://img.photobucket.com/albums/v609/darrennicole259/6ca8d8f.jpg">?
After getting frustrated I try installing it from windows itself by right-clicking and updating driver. It finds the driver it needs and I get it to recognize the soundcard and it says:
<img alt="" src="http://img.photobucket.com/albums/v609/darrennicole259/aa79f3.jpg">?
Is the sound card just incompatible with my computer or is there something I can change or do to fix it and get it running? I really want this up and running so I can connect my 4-Track recorder to my computer to transfer the audio. Thanks for any help at all, I will post more information if you need and would love to get this up and running.

UPDATE:
Ok, so I tried to uninstall it all again and the computer froze up so I restarted it and windows "found new hardware" again and i let it do this:
<img alt="" src="http://img.photobucket.com/albums/v609/darrennicole259/de9d28b.jpg">?
It hung up there a little so I went to uninstall the X-Fi again because of it not responding last time and it uninstalled successfully. SO now when that screen closed I got this message:
<img alt="" src="http://img.photobucket.com/albums/v609/darrennicole259/3fe66b89.jpg">?
I don't know if it is going to work or not now, but I am going to restart the computer. I do not have anything from the disc installed so we'll see what my device manager looks like and see if it is working...

IPad 2 3G 64 mic not working from factory, do you have any idea ?

Hi
I have iPad 2 3G 64 , it works prefect but when I use cam for record video there is problem in mic . Mic not working so no sound in video .
I try to use any app from apple store to test mic but still not work also I try to update the device to 4.3.3 when I finish from update again same problem with mic, I used this iPad for one month
I think this problem from hardware not from software .
Please tell me what i have to do with this problem .

Hi
I have iPad 2 3G 64 , it works prefect but when I use cam for record video there is problem in mic . Mic not working so no sound in video .
I try to use any app from apple store to test mic but still not work also I try to update the device to 4.3.3 when I finish from update again same problem with mic, I used this iPad for one month
I think this problem from hardware not from software .
Please tell me what i have to do with this problem .

Both internal and USB mics not working

Hi there, all. Long-time lurker, first-time poster. Starting last night, I have been having issues with microphone use on my iBook G4. Neither the internal mic nor my USB headset mic (Altec Lansing AHS302USB) are accepting input.
The internal mic's failure doesn't surprise me, as I have heard about the delicate nature of the wire connecting the internal mic from its position on the display down to the main computer. It's the USB mic that confuses me, since USB mics are what everyone seems to recommend that people use when the internal mic is on the fritz (thanks to other mics not working with Mac due to the line-in thing). Also there is the fact that I have used this headset with this computer for over a year with no significant issues until now, with both mics simultaneously failing.
There doesn't seem to be a problem with the headset's wires; I am still able to hear audio through the headphones quite well, and when I load my audio recording program (Audio In) and Sound Preferences, I can see the occasional blip of sound recognition when I move the USB adapter portion around in the port. These blips even occur when the pink microphone jack and headphones jack are unplugged from the adapter, so this suggests to me that the problem lies not with the wires, but somewhere in the USB adapter, port, or the computer itself.
I'm leaning toward the computer itself, since it just seems odd that both mics would just happen to stop working at the same time. That and the fact that audio output still works through the headset, and the USB ports work fine for other USB devices such as my external drive and iPod.
I have tried restarting, resetting the PRAM, and repairing permissions with Disk Utility. Nothing's working so far.
Does anyone have any idea what could possibly be wrong?
For reference's sake, I took a recording of the sound that results from jiggling the USB headset adapter in the port. It's very quiet, so you may need to turn up the volume a little bit to hear it. Again, these are the ONLY sounds that the mic is able to pick up currently.
http://animeutahime.com/temp/faultymicrecording.mp3
iBook G4 Mac OS X (10.4.10) 768 MB RAM, 37.7 GB hard disk

Just to chime in here - I wonder if it's down to the software: I've recently updated to 10.4.10, and the internal mic seems to have stopped working.
One positive effect of the change to 10.4.10 is that my Griffin iMic no longer flips to 8-bit, 22khz recording when I plug it in.
Having said that, I really like to get my internal mic back up and running again.
iBook Mac OS X (10.4.10) 1.5gb RAM, 60gb hard disk

SOUND BLASTER X-FI PLATINUM - MIC NOT WORKING... NEED ANSWER

Similar Messages

Maybe you are looking for