Sound Blaster X-Fi Titanium, when is it expected in the UK? And what pri

Hello,
Just wanted to ask about the Sound Blaster X-Fi Titanium, it's got everything I need/want. (Put off in the past with other ones)
When is it expected in the UK, and what price should it be?
Thank you.
Best Regards,
Laurence
Message Edited by Technex on 05-7-2008 04:5 AM

it will cost 300$ in USA...(i think)
Where is the frontal connection:
SPDIF (in/out)?
Line In 2?
Midi (in/out)?
Remote Control?
300$ for this card? that?s funny.
http://www.vr-zone.com/articles/Creative_Unveiled_X-Fi_Titanium_Fatalty_Series/578.html
Message Edited by PiolhoSM on 05-7-2008 0:05 AMMessage Edited by PiolhoSM on 05-7-2008 0:07 AMMessage Edited by PiolhoSM on 05-7-2008 0:08 AM

Similar Messages

  • PCI Express Sound Blaster X-Fi Titanium Professional Audio

    The a.m. product - PCI Express Sound Blaster X-Fi Titanium Professional Audio - is offered in the Internet under support.creative.com - even a manual (in German) can be downloaded. But I cannot find a link in the Internet to buy the product. Do you know a way to order? do you know the price? The exact name of the product is important.Snaporaz in Munich

    Thanks for the update although this I had personally worked this out myself. Surely this card is to be released globally soon as it has started to pop up in stores available for pre-order. Any ideas on the release date and what will be the differences?
    I have tried to compare it to the <span class="text">Fatalty version to find no difference other than cosmetic. I even went into the FAQ page only to get this:
    [url="http://support.creative.com/kb/ShowArticle.aspx?sid=54538">X-Fi Titanium Professional Audio vs. X-Fi Titanium Fataty series[/url]X-Fi Titanium Professional series is targeted for audiophiles while X-Fi Titanium Fatalty series are targeted for gamers.
    I am sorry but I seriously do not find that helpful in the least bit.
    ?Message Edited by Zail on 08-02-2008 04:05 PM

  • Windows 7 64bit and Sound Blaster X-Fi Titanium - No rear sound

    As the title says I have a sound blaster x-fi titanium running on a windows 7 64bit box. I have downloaded all the latest drivers and tools from creative. The issue is no matter what I do I cannot get the 5. surround working. I have the front 3 speakers working and I can even get it to double the two front side speakers to the rear, but not true 5.. I have tried both DD li've and DTS. I have an Onkyo HT-R550 receiver that supports both DD and DTS and I'm connected over a digital optical cable. Trying to figure this one out!
    I've gone through all the modes in the creative audio software and tried all the surround modes on the receiver.
    Please help

    Ok. I have actually formatted my hard dri've to fix another windows and I'm back where I was. I'm testing using the speaker page in the console. I get great sound from all 3 front speakers and my sub. What I've found when clicking the back two I will get a very quiet but clear test voice through both rear speakers, no matter which side I picked. Also the bass portion of the test comes through the sub as normal. I can't seem to get the rear speakers to test any louder.
    I did the surround sound speaker test and it all sounds good (without the PC involved). Also my PS3 plays great surround sound through it using the same optical cable.
    I also tried your suggestion with no improvement.
    What's next?

  • Sound Blaster X-Fi Titanium

    What kind of idiots run creative, I thought I would give Sound Blaster X-Fi Titanium a try what a mistake. The help on this web site is crap. Try to get a manual u cant. Then the stupig how to when you hit disagree it has a problem. Nothing works including the card. I would whip a creative mother**bleep**ers ass. And I will register over and over just to post this.
    JUNK JUNK JUNK JUNK JUNK JUNK JUNK JUNK JUNK JUNK JUNK JUNK JUNK JUNK JUNK JUNK JUNK

    Did u try the manual? It does not work the chm file. I am not an idiot I have at least 9 computers in the house at this time. I delivered 3 boxes of parts to the local high school. Thos is the biggest POS computer hardware that I have ever purchased. My last three cards that I had workrd flawlessly. Turtle Beach DDL and the generic VIA chipset that comes with the MB. It is working but is creating way to much lag in Quake 3 the only game I play.
    Its a shame some guy hacked the creative drivers and made them better. Shows you what kind of talent creative has or the lack of. I would not buy another creative product as long as I live and I buy a lot of pc parts. I am fixing to uninstall this card and would love to shove it up Fatilitys ass. The guy made it on quake and his name is on a POS that causes the system to lag. Not to say what kind of crap creative wants you to install. Why not just a clean drive with a console? To simple I guess.
    Let me know if you get the manual to load. I would like to have it downloaded to refrence but thats to simple for the creative idiots. I can no longer keep paper copies of manuals I keep them on the pc for refrence. Seriously try the manual. It opens and the directory is there but know data in the main area. What a joke.

  • Sound Blaster X-Fi Titanium stopped working

    If anyone can please help me fix this that would be great
    Specs: Windows 7 64bit, Steel Series 5Hv2, Sound Blaster X-Fi Titanium, need more info let me know
    It worked perfect when I got the pc built 4 months ago then just the other day when I tried to run skype it didn't work with skype so I messed with settings now the mic just doesn't work at all, I've done a ssytem restore, I've reformated, updated the drivers, put settings to default, I even let Dell look and they couldn't figure it out, I check the plugs and it's in the mic in part, how could this happen it worked perfectly before. If anyone has any clue how to get windows 7 to read the mic from the sound card?

    So out of the 22 people who looked at my post none of you know how to help me get my mic working, that's pretty cool

  • New PCI Express Sound Blaster X-Fi Titanium Professional Audio (non Fatal1ty), what's the differen

    Here is the link for this apparently new PCIe sound card
    http://support.creative.com/Products/ProductDetails.aspx?catID=&CatName=Sound+Blaster&s ubCatID=208&subCatName=X-Fi&prodID=7926&prodName=PCI+Express+Sound+Blaster+ X-Fi+Titanium+Professional+Audio
    I would like to know what's the difference between this one and the <span class="mainlink">Fatalty.
    Message Edited by enb4 on 07-24-2008 09:06 PM

    Thanks for the update although this I had personally worked this out myself. Surely this card is to be released globally soon as it has started to pop up in stores available for pre-order. Any ideas on the release date and what will be the differences?
    I have tried to compare it to the <span class="text">Fatalty version to find no difference other than cosmetic. I even went into the FAQ page only to get this:
    [url="http://support.creative.com/kb/ShowArticle.aspx?sid=54538">X-Fi Titanium Professional Audio vs. X-Fi Titanium Fataty series[/url]X-Fi Titanium Professional series is targeted for audiophiles while X-Fi Titanium Fatalty series are targeted for gamers.
    I am sorry but I seriously do not find that helpful in the least bit.
    ?Message Edited by Zail on 08-02-2008 04:05 PM

  • Sound Blaster X-Fi Titanium & Audigy 2 Platium

    I have a Sound Blaster X-Fi Titanium that I replaced a Audigy 2 Platium with and was wondering if I could us the Audigy 2 5.25" dri've with the X-Fi card?? They have both have the 40pin ribbon connector but I wanted to make sure before I did it.
    Thanks!

    Yes you can. I actually used the very first li've dri've or I/O bay with my Audigy 2 and my Fatality Pro. In some cases not all features will work, such as the older style midi in and out ports found on some bays, but everything else will work.

  • Can breakaway box from Audigy Platinum eX connect to Sound Blaster X-Fi Titanium HD?

    I have been happily using the Sound Blaster Audigy Platinum eX for a decade or so but it is now time to build a new box. The Sound Blaster X-Fi Titanium HD seems to be the card for me and it does have a multi-pin connection that seems to match the one on the legacy card. The legacy card has the best external box I have yet seen, the perfect combination of inputs, outputs, and controls and I would dearly love to keep using it. Does anyone know if the two items are compatible?

    Thanks, I was afraid that might be the case. Would the legacy card work with Windows 7 perhaps or has the audio stack changed too drastically from Windows XP to Windows 7? I am loathe to give up this breakaway box, I have never seen another with this many i/o ports and features.

  • Sound Blaster X-Fi Titanium Fatal1ty Champion Series and Win 7 64Bit

    Now that Win 7 SP is out, i am planning on moving over to the Win 7 64Bit OS.
    Whats the best way to setup Sound Blaster X-Fi Titanium Fatalty Champion Series card software setup.
    Is there a DVD i could download or be sent for Win 7.
    Whats the best way to proceed...
    Thanks
    red

    OK I got it!!
    I put in a Price Alert at the egg and got it for 09.00/with FREE shipping so I'm stoked!! it DOES have a yellow sticker on the box that says "works with Windows 7" so I guess this is all I need.
    Are there ANY suggestions on how to go about installing this in Windows 7 64bit, I want the front panel to work and will use it for movies music and mostly gaming.
    what about Windows 7 installing the card as a standard sound device at boot, is there a way to prevent this if not how is this fixed?
    Should I use the newest beta drivers? or wait till I see if I have any problems with the sound not working?
    what about the user made drivers I have seen around these forums, I know they are most likely not supported but how about functionality? would they be better?
    thanks for any suggestions.

  • How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

    How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

    Try reset all settings.
    Settings > General > Reset > Reset all settings.  It won't delete any data.

  • I have an Iphone 3gs and today I had taken some pictures and my battery was 8% i was looking at the few I had took. Then my phone died but when I plugged it into the charger and got it on I went to upload the pictures but they were deleted!

    I have an Iphone 3gs and today I had taken some pictures and my battery was 8% i was looking at the few I had took. Then my phone died but when I plugged it into the charger and got it on I went to upload the pictures but they were deleted! All my other pictures that i have taken are still there, it just deleted the ones I took a couple of hours before it died!
    I was just wondering if there is anyway of getting them back at all? and how common is this?

    Sounds like your iPhone was hacked to unlock and now updating locks back to the original carrier.
    Where did you get the iPhone?

  • When I put music into the stage and pause it, it keeps playing.

    I just started to use Adobe Flash CS6 and I'm having problems. When I import audio to the libary and then drag it to the stage it shows up in the frames perfectly. When I press play it works but when I pause the audio it doesn't pause, it just continues playing and doesn't stop until the audio ends. This makes it extremely hard to sync up the animation to the audio !
    Please help !

    click on the keyframe where you added your sound.  in the properties panel change the sync property from event to stream.  retest.
    p.s. please mark helpful/correct responses.

  • Why does the App store say 'download' to OSX Mavericks when i have already downloaded the update, and restarted the computer? I can't find Mavericks icon on the dashboard or launchpad either! Help!

    Why does the App store say 'download' to OSX Mavericks when i have already downloaded the update, and restarted the computer?
    I can't find Mavericks icon on the dashboard or launchpad either! Help!

    It sounds like you've installed Mavericks.  You can confirm this by clicking on the Apple located at the top left of the screen and choosing "About This Mac" from the menu.  You should see a window appear with the text "Version 10.9.1" near the middle.
    If it says "Version 10.9.1", then you've installed Mavericks.  It still says "Download" in the App Store because you can still download the operating system after installing it.  This is useful if you want to download it for a friend, or create a USB boot drive.
    Morgan

  • When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the test and change the font, it does not change it properly?

    When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the text and change the font, it does not change it properly? This is making it impossible to amend.

    Hi Janedance1,
    If the PDF that you converted already has searchable text, please try disabling OCR as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel. (If the PDF was created from a scanned document and doesn't already have searchable text, disabling OCR isn't a great option, as the text won't be searchable/editable in the converted Word doc.)
    Please let us know how it goes.
    Best,
    Sara

  • How can I delete my Icloud account when I don't know the password and no longer have the email address associated with it?

    How can I delete my Icloud account when I don't know the password and no longer have the email address associated with it?
    You need your password to delete it and I need the email address to reset the password.  I feel like I'm going in circles!!!  Please help!!!

    Go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address (you shouldn't need to verify the old account).  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Maybe you are looking for

  • Can't print from Appleworks 6

    My wife's computer is a G4 Sawtooth, running OSX 10.2. Printer is an Epson Stylus Photo R220. All of the sudden, we can't print from Appleworks word processing. When we try, the printer window from the Print Center says that it's opening communicatio

  • Generate Script from table with Clob and save other Database

    Hi How can I to read data from Clob column and insert into other table in other Database, The fist Table is in Test Quality and second in Production Are there way without to use Export/ Import ? Can I to use Loader ? Using 9i

  • Auto start default html gallery

    Can I auto start the html gallery (default)? Can I not use the thumbs? Is there a better Lightroom template to do this? bob

  • Why does my pointer keep on freezing?

    I have been having a problem with my pointer freezing and I have to shut down. I also use a magic mouse, not  sure if that has anything to do with it?

  • Problem sending MMS/Picture messages

    Wondering if anyone else is having this problem: I'm finding that if i try to send someone a picture message along with a typed message, as soon as i hit send i get a little message saying its converting and then it just stays stuck on "sending". It