Sound Blaster X-Fi Xtreme Audio -Game Probl

Hello all,
I have just recently purchased a new PC in which I bought the sound card named above.
My problem is that when I play the game "Call of Duty 4" the sound card isn't recognized on it. But on "Call of Duty 2" and "Call of Duty " the Sound card is named in the Sound settings and it is much more of a improvement rather than just the Windows Default sound I have to use on Call of Duty 4.
Is there anyway I can fix this? If there is, please tell me how
Thanks!?

I bought apart from the sound blaster audio, sold as "bulk" has the original driver cd

Similar Messages

  • Sound Blaster X-Fi Xtreme Audio: Mic Interfere

    I have an ASUS P5B-Deluxe WiFi AP motherboard which I had a few problems with to begin with and had to RMA two different boards back to eBuyer (bad memory controller & broken battery holder)
    The problem is when I speak over the microphone to friends they report a train sound coming from my end. When I try recording using the built in XP sound recorder I can replicate the train sound. It sounds like bad interference/crackling. This is random though because when I stop the recording and start it again it can be fine until I restart it again. I have tried on many occasions uninstalling and reinstalling the drivers and even installing older drivers. I have even tried every possible configuration within SoundMAX the tool where you configure the on board sound. I have tried various microphones including a superbeam microphone provided with the motherboard and a Logitech headset with a microphone. I have tried disabling microphone boost and muting every other sound channel expect for my left and right speaker.
    I became fed up so I decided to buy a Creative Sound Blaster X-Fi Xtreme Audio sound card thinking that would be the end of my mic problems (Yes i did uninstall everything related to the on board audio from ASUS and disabled on board audio in BIOS). Last week I ditched my on board audio for a Creative X-Fi sound card from Scan.co.uk. It worked instantly out the box, I installed the drivers that were provided on the CD that came with the sound card. The auto updater then update the drivers to the latest. However up until today the problem has started with the Creative card. It started with a friend saying he could hear train like sounds coming from my mic in game and I decided to check it out with Windows sound recorded and in fact the problem has resurfaced. I can record fine up until I stop and start again. Occasionally when I restart recording the interference/high pitched noise starts, I can tell by the graphic line moving up and down without me making any sound.
    For peoples viewing pleasure I saved a raw sound recording from Windows Sound Recorder tool http://rapidshare.com/files/6566423/interference.wav
    I am starting to think this problem may be related to my case fans. I have them on the medium setting, 3x20mm fans and a 200mm fan on the top of my case.
    Here are my system specs:
    Motherboard: ASUS P5B-Deluxe WiFi
    Processor: Intel E6600
    Memory: 2xGB Corsair PC-6400 at 5-5-5-2
    Power Supply: Corsair 520W
    Case: Antec 900
    Help would be appreciated. Thanks

    Bump.
    I am having this issue as well.
    Got an eVGA nForce 680i MoBo, never had other problems with it.
    This is the second problem I have with my Xtreme Audio, and should nobody have a response, I will be sending it back where it came from.
    I am sick of the terrible support Creative offers. :-(

  • Sound very distorted at bootup with Creative Sound Blaster X-Fi Xtreme Audio

    I have a new HP Pavilion Elite e9180t PC with a Creative Sound Blaster X-Fi Xtreme Audio sound card, an OEM card offered by HP.  On two occasions, only two, so far, when the system is done booting the sound is distorted and it buzzes and hisses periodically.  Upon reboot it is fine.
    I have no idea what is going on and am concerned that this is a system of a pending failure.  Is there something I can check?
    Thanks.

    I have this exact same system with the exact same problems.  I called HP and got a woman who insisted it was all in my head.  She didn't say that, but she continuted to tell me that unless she personally heard the problem herself, she could not help me.  I told her it didn't happen all the time but usually at bootup and about every 6 hours or so as I was playing games throughout the day.  I am a computer professional also, which should be noted, and I have worked tier 3 support for many years so I know how much knowledge a tier 1 support person has, which is what she was.  I couldn't understand much of what she said due to the accent, which made it even more frustrating.  Additionally, she remotely got on my system and clicked a bunch of things that made absolutely no sense whatsoever to the resolution of the problem.  It seemed to me that she was trying to portray herself as "fixing" the problem so that I would agree it was now fixed and move one without her having to send me a new sound card, as I suggested.  She asked me the same questions over and over "so what exactly are you hearing?" and "How often does this occur?".  After the 4th time my frustration really began to show.  Especially after "I'm afraid I have to conclude that there is not a problem with your soundcard if I cannot hear it." and "the diagnostics say the sound card is fine so it must be your speakers" even though I have swapped out the speakers several times and it also occurs on the headphones.  Additionally, I bought TWO identical systems, one for me and one for my husband and his does not have the same problem.  She tried to tell me that our parts were not identical, even though I opened both computers and I will tell you they certainly ARE identical.  She is now calling me in exactly 6 hours because I told her that the issue occurs every 6 hours or so -- clearly she does not understand that that was an estimate of how often it occurs, not an exact timeline.  I am really frustrated.  She also told me there were no other complaints for this issue and now I find this forum.  I also found a similar forum on the creative website.  hmmmm.  That tells me she was lying.  She refused to let me speak to anyone else, also.  Where are the award winning service and support technicians in all of this??  I mean, I work with HP from a business perspective all the time and I get better service.  I am extremely frustrated.

  • Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express 1)

    Hi, I've recently bought a SB X-Fi Xtreme Audio (PCI Express edition).
    Before I address my issue, I'd like to point out that my rig is:
    Maximus Extreme (mobo)?
    Q6600 (cpu)
    ATI4870 (vid card)
    4Gigs of DDR3 (ram)
    and my OS is Vista Home Edition (32 bit precision)?
    And so after physically installing the hardware, I quickly installed everything there was on the CD- this included the drivers available on the CD. After this installation, I restarted then found most recent updates via online sources (creative.com). But even after all of this, I wasn't able to get my microphone to work. Now from my understanding, the jack is shared between Line-In and Microphone and I'm supposed to configure this setting. And so I tried to do that, but my only problem was that I was unable to use any of the available features. After researching for a few hours I found out that I, appearently have to uninstall everything that I had installed and then reinstall everything from online sources (from creative.com-- latest drivers for vista 32 bit). But even then, I still can't use my mic or configure the settings so that I could use microphone instead of Line-In.
    Now going back to my actual question, how do I configure the settings so that I could use Microphone instead of Line-In?

    ERe: Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express )[ Bumping.
    Almost the same problem here.
    Sound Blaster X-Fi Xtreme Audio edition, Windows 7 64bit.
    I downloaded the latest driver from the Creative site, installed it, update with the update manager and then i installed the console.
    Issue number : I DONT have your same console. I dont have a "Mode" button, im stuck in Entertainment Mode. I cant control almost nothing and i dont have all the options u have.
    Issue number 2: My mic isnt working good. It's VERY low on volume, i cant be heard without the +20db boost (the only boost option i have, i cant boost more) and even with that acti've that's not that loud.
    It is still working good with my onboard realtek soundcard. I cant understand what's the problem and how to solve it.
    Ah, my headset is a Creative Fatality.

  • Creative Sound Blaster X-Fi Xtreme Audio: Many issues I have been faci

    Hello everyone. This is my first post at these forums, with the hopes of getting my issues resolved once and for all.
    First and foremost, let me inform you that I have very high experience with computer hardware.
    A couple weeks ago, I bought a Creative Sound Blaster X-Fi Xtreme Audio sound card from a local retailer. (Yes, I am aware that this is not an actual X-Fi card with the designated chip). I previously had an onboard sound solution on my motherboard, and uninstalled and removed all of the drivers COMPLETELY before I installed my new sound card. I then opened up my case, and continued with the installation of the card. After I had downloaded and installed all of the latest drivers, I immediately started to notice issues with the card. My MAIN problem is that if I have a specific application open, whatever it may be, one of my headphones, either left or right, will stop producing sound, and then is followed by the second one, which leaves me with no sound output at all. If I restart the application, the problem is temporarily fixed, but then comes back again within a few minutes.
    This is VERY irritating to me, seeing as I originally thought the problem was not with the sound card. Believe it or not, I reinstalled my copy of windows over 5 times throughout the course of the last few weeks in hopes of finally fixing the issue. And here I am, on a brand new installation of windows, and the problem STILL persists.
    I can assure you all of my hardware is functioning correctly as I have tried 2 other sound cards which have not had any issues like this whatsoever.
    Yes, I have read the FAQ, but I couldn't seem to find the solution to my issue there, which is why I am posting it here. Sorry if I sound irritated, but this has bothered me very much and I have been starting to lose a lot of hope in Creative...
    Thanks in advance.

    Anybody?

  • PCI Sound Blaster X-Fi Xtreme Audio Get No Digital Sound Out to my Surround Reciev

    I have read almost everything but CANT FIGURE THIS OUT, PLEASE HELP ME OUT HERE :-)
    My PCI Sound Blaster X-Fi Xtreme Audio is conected to my Sony DTS/DD Reci'ver using a Mini Jack to Toslink cabel connected in the blue Digital Out minijack on the sound card and to my Optical?Toslink input on my reciever.
    I have enabled SPDIF out / Digital Output Only
    I have tried whit and whitout the Bit-Matched
    I have treied the different sampling rates 44, - 96 KHz
    I have tried playing from MS Media Player and DivX player. (dvd, mp3, radio li've, nett tv)
    Im using Vistax32
    I believe i have the correct settings and the correct cabel, but cant get no digital sound out, whats wrong?
    First I tought I neede the Digital I/O module from Creativ, but I have read that this is?NOT necessary.
    PLEASE ANY THING THAT CAN HELP ME SOLVE THIS WOULD MAKE ME REALLY HAPPY :-)

    YOU DONT NEED THE I/O accesory, or rather it is not essential. (unless your reciever only has digital optical(toslink) in?My experiment worked! alss ya need to connect from the sound cards digital out to your recievers coax digital audio?in is: "mono" mini (/8 inch) male to rca style male coax cable. you may have to choose digital only and somy other tricks from a given creative software(?they vary)?and or select the correct input for a given reciever....my Harman Kardon avr 00?and avr 300 series?are particularly tricky. Got pandora one up and running. Devo sounds good!
    Movies tonight via Netflix streaming.....YAY!

  • Creative Sound Blaster X-Fi Xtreme Audio PCI express and Xbox

    Hey im interested in passing the digital signal from my Xbox 360 to my PC speakers and maintaining 5. i would like to to no if the "Creative Sound Blaster X-Fi Xtreme Audio PCI express" card will help me i no it has a optical in on it, but i read that it can only handle stereo. please forgive?me if this is a stupid question because i dont no to much about audio. http://www.overclockers.co.uk/showpr...-052-CL&tool=3?

    Hi Orion,
    You might want to get in touch with support to enquire about the CD.

  • Creative Sound Blaster X-Fi Xtreme Audio (PCI-Express) + Vista 32bit an media pla

    Hi folks,Maybe someone here can help me with this issue, I recently bought a Creative Sound Blaster X-Fi Xtreme Audio 7. Sound Card - OEM (PCI-Express), it arri'ved with the cd with software and drivers on it and i installed it into my vista 32bit without any problems.On rebooting my sound was working normally and as far as i could tell all was great untill that is i went to play some mp3 using windows media player, wmp kept telling me it couldnt play the file type then i tried to play a wma file an got the same thing, basically almost all audio types will no longer play in wmp. I rolled back the driver to use the microsoft driver (high defination audio device) and everything is playing in media player again.Only now i cant use the software suppiled with the card. Anyone have any idea how to use the creative driver and get wmp to play properly thanks in advance.
    (in addition) after some messing around with various settings i discovered that this seems to be caused by the sb enhancements, when i disable them in speaker properties wmp plays as it should, althought i am rather disappointed that i have to disable the features on the card inorder to get it to work properly.

    Hi Orion,
    You might want to get in touch with support to enquire about the CD.

  • Optical Input on Creative Labs Sound Blaster X-Fi Xtreme Audio PCI-E with Logitech z-5

    So i plugged in my Optical cord into my new sound card the Creative Labs Sound Blaster X-Fi Xtreme Audio PCI-E and it worked only in the Front right, Front left, Front centre, and the subwoofer. Now i hear i need a external decoder... but then again that my sound card should decode it as well... the place i bought my card recemended a optical cord for my card?with the?speakers i have?(the?Logitech Z-5500) How much are decoders? What should i do next? Creative seams to have limited support especialy on optical inputs.

    I must have answered something like that in another thread sometime ago, but here goes:
    A single SPDIF connection, optical or coaxial, will only transfer stereo in analog form; no rear or centre channels!
    There are two ways you can get all speakers playing via such a connection:
    () Get your speakers to upmix the audio source to play on all fi've of them
    (2) Output a Dolby Digital (AC3) or DTS signal. These contain the multichannel information encoded in the stereo signal. A suitable decoder (such as the one contained in the Z-5500) will be able to analyze the signal. Unfortunately, this is something you can mostly find in movies.
    So, to sum it up, no natural everyday multichannel sound over one SPDIF (e.g. no EAX, directsound3d etc.)

  • Sound Blaster X-Fi Xtreme Audio, drive

    Hi folks!
    Question :
    I just wounder why the drivers for "X-Fi Xtreme Audio" isnt listed in the "Download section" here @ creative.
    Question 2:
    Can i use the other X-Fi series driver (eg. X-Fi Xtreme Music)?
    Thanks in advance!
    Cheers
    Kello
    Sound Blaster X-Fi Xtreme Audio:
    http://se.europe.creative.com/products/product.asp?category=&subcategory=208&product=5855

    Maybe there are no driver updates available yet .
    Also, is it goin' to be X-Fi drivers or some others ... since, by the picture behind below link, the DSP used in X-Fi Xtreme Audio is CA006 instead of the original X-Fi DSP, CA20K.
    X-Fi Xtreme Audio -
    http://images.europe.creative.com/iss/images/artwork/A5_RGB/x-fi_xtremea_c.jpg
    jutapa

  • Sound Blaster X-Fi Xtreme audio lag prob

    Hi,
    System sepcs:
    XP SP3
    AMD 2.5GB Dual Core
    2GB 800MHz RAM
    500GB HDD 32MB cache SATAII
    I have a sound blaster X-Fi Xtreme audio card and have the latest drivers. when i play any type of sound, music, movies etc the sound seems to 'lag' or play very slow and i tried re-formatting my computer but still no help.
    Any help/ideas is greatly appreciated.

    With your Evolution e49 keys (USB), did you install the drivers to add the USB Midi In via the Properties MIDI music Playback. Once you install the drivers for that USB device, you will have the option to select and change to the USB midi device in Properties MIDI music Playback. This can be easy to do in windows xp, not in vista. In vista you have to have some DAW software installed, such as "Cakewalk SONAR Home Studio 6" to change the midi devices around within the DAW software. In audio console, you have :?MIDI Device:
    SB X-Fi Synth A [EC00]?This is normal and will not see a change or can not be changed within the audio console.
    I have the E-MU Xmidi x (In/Out) USB midi cable. I had to install the USB midi drivers for this device, both in Windows XP and Vista. In Windows XP>Properties MIDI music Playback, I can change to the E-MU Xmidi x USB device and use.
    ??Message Edited by freesky on 2-8-200709:58 AM

  • Sound Blaster X-Fi Xtreme Audio PCI Express Driver/Treiber!!!!(softwa

    Hi, i bought this one: Sound Blaster X-Fi Xtreme Audio PCI Express bulk..
    But where i can download the driver? It isn't on this hompage and i do not find it anywhere...
    Do anybody has this Driver and the software?
    Please help me...
    thx msl

    wannabegeorge wrote:
    I got one of these cards with my new Gateway Computer. They have supplied me with the Vista drivers only. These don't work with XP and Vista is fairly crappy. If anyone out there has these drivers PLEASE upload them somewhere!
    Well, maybe you should search the Gateway Support site?There is a complete installation package (307MB):ftp://ftp.gateway.com/pub/hardware_support/drivers/win_vista/audio/D2022-00-00.exe?

  • Sound Blaster X-Fi Xtreme Audio + Digital I/O mod

    I have a Sound Blaster X-Fi Xtreme Audio which I recently bought together with Logitech Z-5500 system to get surround sound. First I was surprised it only had analog output, but then i saw there was a digital output, but i needed to buy more **bleep** to use it. So I bought the I/O module, got it home today, and I tried to use it with an optical toslink cable. However, it didn't work, and when I looked on the website it seems the module is not capable with my card?! I thought i checked it, but I probably just took for granted it would in fact work since the card has one of these digital I/O outputs on the backside.
    So, have I now thrown away both the money for the card and for the I/O module or am I just too stupid to make it work?

    It is compatible with your card, but you won't get multichannel audio from sources that aren't already encoded as DD/DTS streams. If you don't get any sound at all check that the flexijack is configured as digital I/O instead of line-in and that it doesn't need to reset with every reboot.

  • Sound Blaster X-Fi Xtreme Audio Control I/F

    I purchased an HP e980t with a Sound Blaster X-Fi Xtreme Audio? board as an option. The system came with Vista OS, and had a very nice interface to the audio system that allowed me to listen to the line-in (external sound system), set effects, etc. The taskbar had an icon for this interface on the extreme right, near where the time and date is displayed.
    Problems with the Windows 7 upgrade led me to reinstalling Windows 7. I had assumed that the software downloads from the Creative web site would have the audio I/F software, but I was mistaken.
    Where can I find this I/F application? Baring that, how do I listen to what is coming in over the line-in port?
    Thanks.

    Hi,
    Did this sound card came preinstalled along with your HP computer? If so please contact the computer vendor for assistance because the driver and software are usually distributed and customized by them.

  • Sound Blaster x-fi xtreme audio

    Hello,
    I've got a big problem with my sound blaster x-fi xtreme audio :
    When I'm activating an option than CMSS-3D or the EQ, my sound bugs frequently
    I've already done all required updates but nothing has changed ...
    My computer runs Windows 7 Home edition x64
    My audio conf is 2/2.1
    Excuse my english, but i'm french
    Thanks for your help !

    Please !

Maybe you are looking for