Sound Blaster X-Fi Xtreme Gamer Fatal1ty - Computer randomly freezes accompanied by a single be

I just bought my X-Fi Xtreme Gamer Fatalty Pro Series and my computer randomly freezes for up to 0 seconds and I hear a single beep from my internal computer speaker after which my system goes back to normal for about 5 to 0 minutes and then it repeats the same process. I have upgraded all my drivers for my motherboard, including flashing my bios to an updated version, and I ran the creative software auto update from the website and updated the drivers and software and I'm still having the same issue. I am running a Dell XPS 400 system:?Dell DXP05 MotherboardPentium D830 Dual Core Smithfield @ 3.0Ghz2 gigs ramXFX Nvidia GeForce 7900GS 256mb Video Cardand X-Fi Xtreme Gamer Fatalty Pro Series Card?Any thoughts? I've read similar posts however none seem to be the same as my issue.

Hi,
Did this happen right out of the box or do you own the card for some time now?
Just in case, please ensure that the sound card is firmly seated on the pci slot.

Similar Messages

  • Sound Blaster X-FI Xtreme Gamer Fatal1ty Pro problem

    Hello,
    I own a Sound Blaster X-FI Xtreme Gamer Fatalty Pro and I have a problem with it. If I want to switch to speakers or headphones, by removing the jack and inserting another one back to the sound card, the sounds stops, or it emits a sounds like when someone connected to an ECG dies. I can only swap headphones with speakers and viceversa when the computer is shut off.
    Can you please help me?

    Hi,
    Did this happen right out of the box or do you own the card for some time now?
    Just in case, please ensure that the sound card is firmly seated on the pci slot.

  • Problems with my Creative Sound Blaster X-Fi Xtreme Gamer bulk P

    Hey there!!!
    I acutally have a Problem with my Creative Sound Blaster X-Fi Xtreme Gamer bulk PCI-Card. The Card by it self is working perfectly. But i cant use the Digital-In as the Mic in. I dont know how to turn it so that the Digital-In is the Mic-In. So my Microphone donst work. I hear everything but nobody hears my Voice. There is sometimes a Signal but not the correct, the Guys playing with me dont hear anything of my voice...
    Can somebody help me plz?
    Greetings Thomas

    Moep wrote:
    Why i must use TORRENT?
    Why is this driver not on your page?!
    Please fast help...
    and this is a secure download you mean? ....
    Jeez, calm down already. I never said you HAD to download it, but if you want any of the applications that work in XP to work in Vista then you're going to need that disk; either by downloading it or fromk here,?http://us.creative.com/products/prod...7&product=6743?
    2. ISN'T THIS THE DRIVER FOR ME?! http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=7838Message Edited by Moep on 07-3-20070:7 PM
    Maybe you really should take a vallium or something and re-read what I posted, then you may just grasp the fact that that is the exact driver I told you you needed.

  • Sound Blaster X-FI Xtreme Gamer Card Trouble With Windows Vi

    Hi, yesterday I installed vista and had no sound, I then updated the drivers for my Sound Blaster X-FI XtremeGamer Card and then the card was detected. The card says the drivers are working and that everything is fine yet I hear no sound, I have messed around with the options unmuting things but nothing seems to work, any help would be great. Thanks, Auro

    Hi, im not tryin to insult ur intelligence but have u checked to make sure the sound is not muted in windows? for some reason my pc mutes the sound randomly when i turn it on (yes im running Vista 64...). This confused the beejesus out of me until i realised what was happening. Now im lucky if my pc actually starts up because of crummy xfi drivers and the BSOD but thats another rant entirely.....
    Jason

  • Sound blaster x-fi xtreme gamer - problem with headpho

    Hi,I've install the card and i want to use the creative speakers and headphones as well. (seperatly offcourse, but connected together)Is it possible at all to connect both of them together?for instance, creative shows in the manual picture to connect the headphones in line, and the speakers in 2.but i can only hear the speakers or the headphones when i connect them in line ... I thought that i can "program" some jack? ( like in most motherboards) to do that as well, but i saw the the "flexijack" option is all grey and cannot be used. If some one here know/had this problem, i would appreciate some help/advice. Thanks in advance,??

    Hi,
    Did this happen right out of the box or do you own the card for some time now?
    Just in case, please ensure that the sound card is firmly seated on the pci slot.

  • Sound very distorted at bootup with Creative Sound Blaster X-Fi Xtreme Audio

    I have a new HP Pavilion Elite e9180t PC with a Creative Sound Blaster X-Fi Xtreme Audio sound card, an OEM card offered by HP.  On two occasions, only two, so far, when the system is done booting the sound is distorted and it buzzes and hisses periodically.  Upon reboot it is fine.
    I have no idea what is going on and am concerned that this is a system of a pending failure.  Is there something I can check?
    Thanks.

    I have this exact same system with the exact same problems.  I called HP and got a woman who insisted it was all in my head.  She didn't say that, but she continuted to tell me that unless she personally heard the problem herself, she could not help me.  I told her it didn't happen all the time but usually at bootup and about every 6 hours or so as I was playing games throughout the day.  I am a computer professional also, which should be noted, and I have worked tier 3 support for many years so I know how much knowledge a tier 1 support person has, which is what she was.  I couldn't understand much of what she said due to the accent, which made it even more frustrating.  Additionally, she remotely got on my system and clicked a bunch of things that made absolutely no sense whatsoever to the resolution of the problem.  It seemed to me that she was trying to portray herself as "fixing" the problem so that I would agree it was now fixed and move one without her having to send me a new sound card, as I suggested.  She asked me the same questions over and over "so what exactly are you hearing?" and "How often does this occur?".  After the 4th time my frustration really began to show.  Especially after "I'm afraid I have to conclude that there is not a problem with your soundcard if I cannot hear it." and "the diagnostics say the sound card is fine so it must be your speakers" even though I have swapped out the speakers several times and it also occurs on the headphones.  Additionally, I bought TWO identical systems, one for me and one for my husband and his does not have the same problem.  She tried to tell me that our parts were not identical, even though I opened both computers and I will tell you they certainly ARE identical.  She is now calling me in exactly 6 hours because I told her that the issue occurs every 6 hours or so -- clearly she does not understand that that was an estimate of how often it occurs, not an exact timeline.  I am really frustrated.  She also told me there were no other complaints for this issue and now I find this forum.  I also found a similar forum on the creative website.  hmmmm.  That tells me she was lying.  She refused to let me speak to anyone else, also.  Where are the award winning service and support technicians in all of this??  I mean, I work with HP from a business perspective all the time and I get better service.  I am extremely frustrated.

  • Sound blaster X-fi xtreme music subwoofer crankling so

    i am having some problem with my sound blaster x-fi. when playing a song it is smooth suddenly there will be some crankling sound from my subwoofer. but when i reset my speakers it is fine but why the crankling sound occurs.
    the crankling sound comes eith with the bass . When a bass is realeased from the subwoofer the crankling sound comes along with the bass. please help me solve this problem
    computer spec:
    P4 3.2 Ghz
    ASUS P4P800 SE
    Kingston 256 X 2 DDR 400 Mhz running in Dual Channel mode
    Seagate 20Gb SATA 50
    Nvidia Geforce 6200
    Lite-on DVD Writer
    Sound Blaster X-fi Xtreme Music
    Altec Lansing ADA 885 4. speaker system
    Please some one help me to solve my problem
    THANKS

    man....i think you must recheck the connecters from Soundcard and your speakers.A poor connect can make poor quality. In catalogue say the same thing.
    And can you help me answer this question:
    -I have this speaker,too.
    -And when i use it with an Audigy soundcard and in 'quad mode' of speaker then the problem happen : there is no bass at all with two rear speakers.And sadly to say,This mode is very useful for gamer. This problem is shouted too by many users and there is a solution for this ,a 'bassfix' file from Dell.But it didn't work for me.
    -Now,i want to buy a X-Fi extreme music,the same of you,but i can't not sure this problem finished or not.So can you check this for me?(Is Quad mode work OK with new sound card and the problem gone?)Please !!!!
    Thanks a lot

  • Sound blaster Audigy 2 zs gamer problem!

    (Sound blaster Audigy 2 zs gamer problem!? I had a recent problem recently that caused Windows not to load at all. After getting that fixed and the computer back home I have run into a sound issue. None of the Creative's Media Source programs would work properlly. When clicked on I would get the error that the program has encountered an error and needs to close. Finally un-installed all creative programs and related software and went through the re-install process. Encountered an error that program could not load because plxcore.plx cannot be found. I went through the solution listed on?Creative's web site to fix the?issue and none of fixes worked. Recently deleted everything Creative again by uninstalling all drivers and going through the installshield folder and deletd all creative related items. Went through the install process again. Had the plx error, fixed it and had sound but had the same problems with the Media SOurce as before. Went to Creative's web site through auto updater for a new driver and other essential items needed for my sound. Back to no sound again. Under Windows control panel under sounds and audio devices under volume tab, it will not even let me select the speaker setting or place the volume control on the task bar. @99.3.9.75

    Brettpopp
    Try updating your BIOS to the latest and have the sound card tested on another machine to see if it is still functioning.
    Jason

  • Creative Sound Blaster X-Fi Xtreme Audio: Many issues I have been faci

    Hello everyone. This is my first post at these forums, with the hopes of getting my issues resolved once and for all.
    First and foremost, let me inform you that I have very high experience with computer hardware.
    A couple weeks ago, I bought a Creative Sound Blaster X-Fi Xtreme Audio sound card from a local retailer. (Yes, I am aware that this is not an actual X-Fi card with the designated chip). I previously had an onboard sound solution on my motherboard, and uninstalled and removed all of the drivers COMPLETELY before I installed my new sound card. I then opened up my case, and continued with the installation of the card. After I had downloaded and installed all of the latest drivers, I immediately started to notice issues with the card. My MAIN problem is that if I have a specific application open, whatever it may be, one of my headphones, either left or right, will stop producing sound, and then is followed by the second one, which leaves me with no sound output at all. If I restart the application, the problem is temporarily fixed, but then comes back again within a few minutes.
    This is VERY irritating to me, seeing as I originally thought the problem was not with the sound card. Believe it or not, I reinstalled my copy of windows over 5 times throughout the course of the last few weeks in hopes of finally fixing the issue. And here I am, on a brand new installation of windows, and the problem STILL persists.
    I can assure you all of my hardware is functioning correctly as I have tried 2 other sound cards which have not had any issues like this whatsoever.
    Yes, I have read the FAQ, but I couldn't seem to find the solution to my issue there, which is why I am posting it here. Sorry if I sound irritated, but this has bothered me very much and I have been starting to lose a lot of hope in Creative...
    Thanks in advance.

    Anybody?

  • Sound Blaster X-Fi Xtreme audio lag prob

    Hi,
    System sepcs:
    XP SP3
    AMD 2.5GB Dual Core
    2GB 800MHz RAM
    500GB HDD 32MB cache SATAII
    I have a sound blaster X-Fi Xtreme audio card and have the latest drivers. when i play any type of sound, music, movies etc the sound seems to 'lag' or play very slow and i tried re-formatting my computer but still no help.
    Any help/ideas is greatly appreciated.

    With your Evolution e49 keys (USB), did you install the drivers to add the USB Midi In via the Properties MIDI music Playback. Once you install the drivers for that USB device, you will have the option to select and change to the USB midi device in Properties MIDI music Playback. This can be easy to do in windows xp, not in vista. In vista you have to have some DAW software installed, such as "Cakewalk SONAR Home Studio 6" to change the midi devices around within the DAW software. In audio console, you have :?MIDI Device:
    SB X-Fi Synth A [EC00]?This is normal and will not see a change or can not be changed within the audio console.
    I have the E-MU Xmidi x (In/Out) USB midi cable. I had to install the USB midi drivers for this device, both in Windows XP and Vista. In Windows XP>Properties MIDI music Playback, I can change to the E-MU Xmidi x USB device and use.
    ??Message Edited by freesky on 2-8-200709:58 AM

  • Sound Blaster X-Fi Xtreme Audio PCI Express Driver/Treiber!!!!(softwa

    Hi, i bought this one: Sound Blaster X-Fi Xtreme Audio PCI Express bulk..
    But where i can download the driver? It isn't on this hompage and i do not find it anywhere...
    Do anybody has this Driver and the software?
    Please help me...
    thx msl

    wannabegeorge wrote:
    I got one of these cards with my new Gateway Computer. They have supplied me with the Vista drivers only. These don't work with XP and Vista is fairly crappy. If anyone out there has these drivers PLEASE upload them somewhere!
    Well, maybe you should search the Gateway Support site?There is a complete installation package (307MB):ftp://ftp.gateway.com/pub/hardware_support/drivers/win_vista/audio/D2022-00-00.exe?

  • Sound Blaster X-Fi Xtreme Audio Control I/F

    I purchased an HP e980t with a Sound Blaster X-Fi Xtreme Audio? board as an option. The system came with Vista OS, and had a very nice interface to the audio system that allowed me to listen to the line-in (external sound system), set effects, etc. The taskbar had an icon for this interface on the extreme right, near where the time and date is displayed.
    Problems with the Windows 7 upgrade led me to reinstalling Windows 7. I had assumed that the software downloads from the Creative web site would have the audio I/F software, but I was mistaken.
    Where can I find this I/F application? Baring that, how do I listen to what is coming in over the line-in port?
    Thanks.

    Hi,
    Did this sound card came preinstalled along with your HP computer? If so please contact the computer vendor for assistance because the driver and software are usually distributed and customized by them.

  • Sound Blaster X-Fi Xtreme Audio: Mic Interfere

    I have an ASUS P5B-Deluxe WiFi AP motherboard which I had a few problems with to begin with and had to RMA two different boards back to eBuyer (bad memory controller & broken battery holder)
    The problem is when I speak over the microphone to friends they report a train sound coming from my end. When I try recording using the built in XP sound recorder I can replicate the train sound. It sounds like bad interference/crackling. This is random though because when I stop the recording and start it again it can be fine until I restart it again. I have tried on many occasions uninstalling and reinstalling the drivers and even installing older drivers. I have even tried every possible configuration within SoundMAX the tool where you configure the on board sound. I have tried various microphones including a superbeam microphone provided with the motherboard and a Logitech headset with a microphone. I have tried disabling microphone boost and muting every other sound channel expect for my left and right speaker.
    I became fed up so I decided to buy a Creative Sound Blaster X-Fi Xtreme Audio sound card thinking that would be the end of my mic problems (Yes i did uninstall everything related to the on board audio from ASUS and disabled on board audio in BIOS). Last week I ditched my on board audio for a Creative X-Fi sound card from Scan.co.uk. It worked instantly out the box, I installed the drivers that were provided on the CD that came with the sound card. The auto updater then update the drivers to the latest. However up until today the problem has started with the Creative card. It started with a friend saying he could hear train like sounds coming from my mic in game and I decided to check it out with Windows sound recorded and in fact the problem has resurfaced. I can record fine up until I stop and start again. Occasionally when I restart recording the interference/high pitched noise starts, I can tell by the graphic line moving up and down without me making any sound.
    For peoples viewing pleasure I saved a raw sound recording from Windows Sound Recorder tool http://rapidshare.com/files/6566423/interference.wav
    I am starting to think this problem may be related to my case fans. I have them on the medium setting, 3x20mm fans and a 200mm fan on the top of my case.
    Here are my system specs:
    Motherboard: ASUS P5B-Deluxe WiFi
    Processor: Intel E6600
    Memory: 2xGB Corsair PC-6400 at 5-5-5-2
    Power Supply: Corsair 520W
    Case: Antec 900
    Help would be appreciated. Thanks

    Bump.
    I am having this issue as well.
    Got an eVGA nForce 680i MoBo, never had other problems with it.
    This is the second problem I have with my Xtreme Audio, and should nobody have a response, I will be sending it back where it came from.
    I am sick of the terrible support Creative offers. :-(

  • Sound Blaster x-fi xtreme audio

    Hello,
    I've got a big problem with my sound blaster x-fi xtreme audio :
    When I'm activating an option than CMSS-3D or the EQ, my sound bugs frequently
    I've already done all required updates but nothing has changed ...
    My computer runs Windows 7 Home edition x64
    My audio conf is 2/2.1
    Excuse my english, but i'm french
    Thanks for your help !

    Please !

  • Sound Blaster X-Fi Xtreme problem with logitech Z-5500 speake

    I have just taken deli'very of a new PC fitted with a Sound Blaster X- Fi Xtreme (driver version 6.0..28)
    I have this connected to my Logitech Z-5500 5. speaker set.
    I am unable to pick up all 5 speakers in any of the effects apart from ?effect: 6 Ch Direct?. Using the entertainment mode (creative software) I can test the speakers and still dont here the centre or rear unless I have the Logitech speakers set to effect 6 Ch Direct.
    The other thing is that when in the effect of ?6 Ch direct? I get interference and can here noise coming through the speakers when I move my mouse over icons etc.
    Any ideas! Or suggestions?

    BBsin26 wrote:
    How do i connect the Optical cord form the Logitech Z-5500 into the X-FI Xtreme Gamer, if there are no optical jacks to plug into what should i do? is there some sort of adapter for this? someone plz help me....Message Edited by BBsin26 on 08-7-200706:50 PM
    How about RTFM.
    ?http://us.creative.com/support/downl...Fi+XtremeGamerMessage Edited by stormy3 on 08-8-200707:54 AM

Maybe you are looking for

  • Report is not getting published on brodcaster.

    hello friends , I am not publish the report on Bex brod caster ? do i need to do any setting ? i am trying the publish thr analyzer or query designer . Please suggest .

  • White Screen at Boot When Attempting to Access Recovery or Select a Boot Disk

    Introduction I want to share a solution for a problem I encountered that Apple technical support was unaware of (they said they would create a new kdoc when I called them to share my problem and its solution) and for which I could find no documentati

  • ADOBE forms and selection screen.

    Hello experts. I'm facing a problem. i need to create a pdf form based on data from a selection screen. everything works fine BUT when i navigate back from the form to the selection screen it does not clear the data - which means the gui fields are e

  • Reg. Autoshapes from .rtf template not printing

    Hi: I am using a RTF template to produce the XML output. When I upload it to Apps the autoshapes e.g Line, Box, ellipse etc.;don't show at the position that they were created on the template or they show only partially at another part of the document

  • Oracle financial user guide

    Hi, could you provide the oracle financial application user guide. since we are new to this technology. we need the guide to explore the application. Thanks in advance. Jaya