Sound Blaster X-Fi Xtreme Music Bass level control in THX setup cons

hi, i have a Sound Blaster X-Fi Xtreme Music, plugged in to a Logitech X-530 speaker system. The problem i'm having its in the bass redirection controls in THX setup console... The crossover frequency works fine, but i can't control the subwoofer level, i tried it a few days ago and it worked, it was the first and last time it worked... any help?

Hello, I know this is un related but I require your help. Im on the same setup as you but I have the next speakers up the X 540. However the sound card seems to be louder on the left than the right. Is this something to do with the Crossover you mentioned?
Thanks for you help.
If you can help id be greatful if we could talk on msn?

Similar Messages

  • Sound blaster X-fi xtreme music subwoofer crankling so

    i am having some problem with my sound blaster x-fi. when playing a song it is smooth suddenly there will be some crankling sound from my subwoofer. but when i reset my speakers it is fine but why the crankling sound occurs.
    the crankling sound comes eith with the bass . When a bass is realeased from the subwoofer the crankling sound comes along with the bass. please help me solve this problem
    computer spec:
    P4 3.2 Ghz
    ASUS P4P800 SE
    Kingston 256 X 2 DDR 400 Mhz running in Dual Channel mode
    Seagate 20Gb SATA 50
    Nvidia Geforce 6200
    Lite-on DVD Writer
    Sound Blaster X-fi Xtreme Music
    Altec Lansing ADA 885 4. speaker system
    Please some one help me to solve my problem
    THANKS

    man....i think you must recheck the connecters from Soundcard and your speakers.A poor connect can make poor quality. In catalogue say the same thing.
    And can you help me answer this question:
    -I have this speaker,too.
    -And when i use it with an Audigy soundcard and in 'quad mode' of speaker then the problem happen : there is no bass at all with two rear speakers.And sadly to say,This mode is very useful for gamer. This problem is shouted too by many users and there is a solution for this ,a 'bassfix' file from Dell.But it didn't work for me.
    -Now,i want to buy a X-Fi extreme music,the same of you,but i can't not sure this problem finished or not.So can you check this for me?(Is Quad mode work OK with new sound card and the problem gone?)Please !!!!
    Thanks a lot

  • Creative Sound Blaster X-fi Xtreme Music prob

    I have Creative Sound Blaster X-fi Xtreme Music and i'm wondering how can I adjust the settings so I stop hearing myself in the microphone.
    Please answer me, thanks a lot!
    BladeCris

    It has when you are in "Audio Creation" mode and set speakers to 5.1 (or 7.1 if you use tripple plugs). You can route any input monitoring and stereo output to any output jacks, and even duplicate it to several jacks. Depending on your audio software you should also be able to route specific tracks to specific outputs (while in the creative console you define what plugs the output channels are send to).

  • Sound Blaster X-Fi Xtreme Music & Creative Digital I/O Mod

    I have a Sound Blaster X-Fi Xtreme Music and I am told by the USA Creative website that I can attach a Creative Digital I/O Module (see link below). What I want to know is, will the optical output on the Creative Digital I/O Module produce a stereo, 5., 6. or 7. output? Or even all of these?
    link to Creative Digital I/O Module:-
    http://www.soundblaster.com/products/product.asp?category=&subcategory=6&product=780Mes sage Edited by andy030798 on 0-08-20072:28 AM
    Message Edited by andy030798 on 0-08-20072:28 AM

    Hi Andy,
    It depends on the source. On an optical output, you'll get multiple channels through if it's an AC3 source, such as the audio from a DVD. Other/normal audio will only come through as a stereo PCM signal though, so you'll only get 2 channels then. Check this sticky thread for some more detail:
    http://forums.creative.com/creativel...message.id=270
    Cat

  • Is the Sound Blaster X-Fi Xtreme Music supposed to work properly on my comput

    Hello,
    first of all sorry for my bad english in some points because I'm german. ;-)
    Now my question:
    I'd like to buy the X-Fi Xtreme Music but I'm worried about whether the soundcard will work on my computer or not. I've heard that there exist several problems with nForce4-Chipsets and other ones.
    Can you tell me if the card is going to work on my computer?
    Here are the specifications:
    CPU: Intel Pentium 4 ,8 Ghz
    Motherboard: MSI MS-6399
    Chipset: i845D (Intel)
    Graphic: GeForce 3 Ti 200
    BIOS: Award Modular BIOS v6.00 (Phoenix)
    52 MB SD-RAM
    The computer is over 4 years old.
    Id would be very kind of you if you answer my question.
    Thanks a lot.
    MumpitzMessage Edited by mumpitz on 07-07-2006 0:29 PMMessage Edited by mumpitz on 07-07-2006 0:32 PM

    Hard to say honestly but think your safe. Personally it seems a large pecentage of ppl with the SCP issues posted here also have Pci-e systems and or Raid controllers. I have an "old" system with AGP and not had a prob with the issue myself. Best bet if possible is to buy it local, that way if doesnt work right you can take it back immediatly.

  • Hello Guys Am Thinking About Get This Creative Sound Blaster X-Fi Xtreme Music

    The Thing Is I Will Be Use it for Native Instruments Traktor DJ Studio 3 will this work
    a need soundcard with Multi-channel audio interface so can monitor the sound though the head phones
    and have the music going thoug the speakers a dont No if this sound card has Multi-channel audio interface?
    more info of the product here what be use it for
    http://www.native-instruments.com/in...id=traktor3_us
    Thanx Verry Much For You Help Guys Am Really Stuck Here .

    It has when you are in "Audio Creation" mode and set speakers to 5.1 (or 7.1 if you use tripple plugs). You can route any input monitoring and stereo output to any output jacks, and even duplicate it to several jacks. Depending on your audio software you should also be able to route specific tracks to specific outputs (while in the creative console you define what plugs the output channels are send to).

  • HELP ASUS Vintage AH1 And Creative Sound Blaster X-Fi Xtreme Mu

    I have a weird problem.
    I have an ASUS vintage ah system with an AMD 2200+ 64bit processor
    ATI PCIE Vidcard (X800 GTO Squared)
    I added the soundcard today, replacing my audigy 4. Soundcard purchased : Creative Sound Blaster X-Fi Xtreme Music
    When i booted the pc, it posts ok, then when windows xp and vista rc both get to the moving blue or green bar it just stops dead. Harddri've light is out, no disk activity, it stays this way indeffinately.
    I've tried shutting off all bios options, i've flashed to latest BIOS and no joy.
    I tried the card in my second pentium 4 machine and it boots fine.
    What the hell is goin on?
    Anyone else seen any weird incompatabilities or have this card running on a vintage ah?
    Thanks

    Hi,
    That is probably a fault with the card. I'd contact your retailer or our customer service (contact us on the top menu)..
    They'll be able to get the card replaced.
    John

  • Sound Blaster X-Fi Xtreme Audio, drive

    Hi folks!
    Question :
    I just wounder why the drivers for "X-Fi Xtreme Audio" isnt listed in the "Download section" here @ creative.
    Question 2:
    Can i use the other X-Fi series driver (eg. X-Fi Xtreme Music)?
    Thanks in advance!
    Cheers
    Kello
    Sound Blaster X-Fi Xtreme Audio:
    http://se.europe.creative.com/products/product.asp?category=&subcategory=208&product=5855

    Maybe there are no driver updates available yet .
    Also, is it goin' to be X-Fi drivers or some others ... since, by the picture behind below link, the DSP used in X-Fi Xtreme Audio is CA006 instead of the original X-Fi DSP, CA20K.
    X-Fi Xtreme Audio -
    http://images.europe.creative.com/iss/images/artwork/A5_RGB/x-fi_xtremea_c.jpg
    jutapa

  • Sound Blaster X-Fi Xtreme audio lag prob

    Hi,
    System sepcs:
    XP SP3
    AMD 2.5GB Dual Core
    2GB 800MHz RAM
    500GB HDD 32MB cache SATAII
    I have a sound blaster X-Fi Xtreme audio card and have the latest drivers. when i play any type of sound, music, movies etc the sound seems to 'lag' or play very slow and i tried re-formatting my computer but still no help.
    Any help/ideas is greatly appreciated.

    With your Evolution e49 keys (USB), did you install the drivers to add the USB Midi In via the Properties MIDI music Playback. Once you install the drivers for that USB device, you will have the option to select and change to the USB midi device in Properties MIDI music Playback. This can be easy to do in windows xp, not in vista. In vista you have to have some DAW software installed, such as "Cakewalk SONAR Home Studio 6" to change the midi devices around within the DAW software. In audio console, you have :?MIDI Device:
    SB X-Fi Synth A [EC00]?This is normal and will not see a change or can not be changed within the audio console.
    I have the E-MU Xmidi x (In/Out) USB midi cable. I had to install the USB midi drivers for this device, both in Windows XP and Vista. In Windows XP>Properties MIDI music Playback, I can change to the E-MU Xmidi x USB device and use.
    ??Message Edited by freesky on 2-8-200709:58 AM

  • PLEASE HELP!! ExpressCard Sound Blaster X-Fi Xtreme Audio Sound Card for NOTEBO

    Hi. I'm new here and found this forum because I have problems with my?Sound Blaster X-Fi Xtreme Audio Sound Card for notebooks. The card itself works fine with my Dell XPS notebook but I also purchased the upgrade kit-speaker docking module that would allow me to play my 4/4. speakers. The problem lies withiin the speaker docking module (upgrade kit). I'm running Windows Vista, could this be the problem? I don't get sound from my speakers. When I run the diagnostic test I only hear sounds from my front left and right speakers and nothing from my sub and my back speakers. I hear NOTHING when I play music or anything off of my laptop. Please help with this issue. Thank you.

    That's great, but ideally i would require to purchase from the UK.....

  • Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express 1)

    Hi, I've recently bought a SB X-Fi Xtreme Audio (PCI Express edition).
    Before I address my issue, I'd like to point out that my rig is:
    Maximus Extreme (mobo)?
    Q6600 (cpu)
    ATI4870 (vid card)
    4Gigs of DDR3 (ram)
    and my OS is Vista Home Edition (32 bit precision)?
    And so after physically installing the hardware, I quickly installed everything there was on the CD- this included the drivers available on the CD. After this installation, I restarted then found most recent updates via online sources (creative.com). But even after all of this, I wasn't able to get my microphone to work. Now from my understanding, the jack is shared between Line-In and Microphone and I'm supposed to configure this setting. And so I tried to do that, but my only problem was that I was unable to use any of the available features. After researching for a few hours I found out that I, appearently have to uninstall everything that I had installed and then reinstall everything from online sources (from creative.com-- latest drivers for vista 32 bit). But even then, I still can't use my mic or configure the settings so that I could use microphone instead of Line-In.
    Now going back to my actual question, how do I configure the settings so that I could use Microphone instead of Line-In?

    ERe: Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express )[ Bumping.
    Almost the same problem here.
    Sound Blaster X-Fi Xtreme Audio edition, Windows 7 64bit.
    I downloaded the latest driver from the Creative site, installed it, update with the update manager and then i installed the console.
    Issue number : I DONT have your same console. I dont have a "Mode" button, im stuck in Entertainment Mode. I cant control almost nothing and i dont have all the options u have.
    Issue number 2: My mic isnt working good. It's VERY low on volume, i cant be heard without the +20db boost (the only boost option i have, i cant boost more) and even with that acti've that's not that loud.
    It is still working good with my onboard realtek soundcard. I cant understand what's the problem and how to solve it.
    Ah, my headset is a Creative Fatality.

  • Creative Sound Blaster X-Fi Xtreme Audio: Many issues I have been faci

    Hello everyone. This is my first post at these forums, with the hopes of getting my issues resolved once and for all.
    First and foremost, let me inform you that I have very high experience with computer hardware.
    A couple weeks ago, I bought a Creative Sound Blaster X-Fi Xtreme Audio sound card from a local retailer. (Yes, I am aware that this is not an actual X-Fi card with the designated chip). I previously had an onboard sound solution on my motherboard, and uninstalled and removed all of the drivers COMPLETELY before I installed my new sound card. I then opened up my case, and continued with the installation of the card. After I had downloaded and installed all of the latest drivers, I immediately started to notice issues with the card. My MAIN problem is that if I have a specific application open, whatever it may be, one of my headphones, either left or right, will stop producing sound, and then is followed by the second one, which leaves me with no sound output at all. If I restart the application, the problem is temporarily fixed, but then comes back again within a few minutes.
    This is VERY irritating to me, seeing as I originally thought the problem was not with the sound card. Believe it or not, I reinstalled my copy of windows over 5 times throughout the course of the last few weeks in hopes of finally fixing the issue. And here I am, on a brand new installation of windows, and the problem STILL persists.
    I can assure you all of my hardware is functioning correctly as I have tried 2 other sound cards which have not had any issues like this whatsoever.
    Yes, I have read the FAQ, but I couldn't seem to find the solution to my issue there, which is why I am posting it here. Sorry if I sound irritated, but this has bothered me very much and I have been starting to lose a lot of hope in Creative...
    Thanks in advance.

    Anybody?

  • PCI Sound Blaster X-Fi Xtreme Audio Get No Digital Sound Out to my Surround Reciev

    I have read almost everything but CANT FIGURE THIS OUT, PLEASE HELP ME OUT HERE :-)
    My PCI Sound Blaster X-Fi Xtreme Audio is conected to my Sony DTS/DD Reci'ver using a Mini Jack to Toslink cabel connected in the blue Digital Out minijack on the sound card and to my Optical?Toslink input on my reciever.
    I have enabled SPDIF out / Digital Output Only
    I have tried whit and whitout the Bit-Matched
    I have treied the different sampling rates 44, - 96 KHz
    I have tried playing from MS Media Player and DivX player. (dvd, mp3, radio li've, nett tv)
    Im using Vistax32
    I believe i have the correct settings and the correct cabel, but cant get no digital sound out, whats wrong?
    First I tought I neede the Digital I/O module from Creativ, but I have read that this is?NOT necessary.
    PLEASE ANY THING THAT CAN HELP ME SOLVE THIS WOULD MAKE ME REALLY HAPPY :-)

    YOU DONT NEED THE I/O accesory, or rather it is not essential. (unless your reciever only has digital optical(toslink) in?My experiment worked! alss ya need to connect from the sound cards digital out to your recievers coax digital audio?in is: "mono" mini (/8 inch) male to rca style male coax cable. you may have to choose digital only and somy other tricks from a given creative software(?they vary)?and or select the correct input for a given reciever....my Harman Kardon avr 00?and avr 300 series?are particularly tricky. Got pandora one up and running. Devo sounds good!
    Movies tonight via Netflix streaming.....YAY!

  • Creative Sound Blaster X-Fi Xtreme Audio PCI express and Xbox

    Hey im interested in passing the digital signal from my Xbox 360 to my PC speakers and maintaining 5. i would like to to no if the "Creative Sound Blaster X-Fi Xtreme Audio PCI express" card will help me i no it has a optical in on it, but i read that it can only handle stereo. please forgive?me if this is a stupid question because i dont no to much about audio. http://www.overclockers.co.uk/showpr...-052-CL&tool=3?

    Hi Orion,
    You might want to get in touch with support to enquire about the CD.

  • Creative Sound Blaster X-Fi Xtreme Audio (PCI-Express) + Vista 32bit an media pla

    Hi folks,Maybe someone here can help me with this issue, I recently bought a Creative Sound Blaster X-Fi Xtreme Audio 7. Sound Card - OEM (PCI-Express), it arri'ved with the cd with software and drivers on it and i installed it into my vista 32bit without any problems.On rebooting my sound was working normally and as far as i could tell all was great untill that is i went to play some mp3 using windows media player, wmp kept telling me it couldnt play the file type then i tried to play a wma file an got the same thing, basically almost all audio types will no longer play in wmp. I rolled back the driver to use the microsoft driver (high defination audio device) and everything is playing in media player again.Only now i cant use the software suppiled with the card. Anyone have any idea how to use the creative driver and get wmp to play properly thanks in advance.
    (in addition) after some messing around with various settings i discovered that this seems to be caused by the sb enhancements, when i disable them in speaker properties wmp plays as it should, althought i am rather disappointed that i have to disable the features on the card inorder to get it to work properly.

    Hi Orion,
    You might want to get in touch with support to enquire about the CD.

Maybe you are looking for