Sound Blaster X-Fi Xtreme problem with logitech Z-5500 speake

I have just taken deli'very of a new PC fitted with a Sound Blaster X- Fi Xtreme (driver version 6.0..28)
I have this connected to my Logitech Z-5500 5. speaker set.
I am unable to pick up all 5 speakers in any of the effects apart from ?effect: 6 Ch Direct?. Using the entertainment mode (creative software) I can test the speakers and still dont here the centre or rear unless I have the Logitech speakers set to effect 6 Ch Direct.
The other thing is that when in the effect of ?6 Ch direct? I get interference and can here noise coming through the speakers when I move my mouse over icons etc.
Any ideas! Or suggestions?

BBsin26 wrote:
How do i connect the Optical cord form the Logitech Z-5500 into the X-FI Xtreme Gamer, if there are no optical jacks to plug into what should i do? is there some sort of adapter for this? someone plz help me....Message Edited by BBsin26 on 08-7-200706:50 PM
How about RTFM.
?http://us.creative.com/support/downl...Fi+XtremeGamerMessage Edited by stormy3 on 08-8-200707:54 AM

Similar Messages

SB1040 PCI Express Sound Blaster X-Fi Xtreme Problem

Hello there,
I got a SB040 PCI Express Sound Blaster X-Fi Xtreme sound card and installed it under Windows 7 64Bit.
Everything is working perfect but i got Problems with my "Line-In" option.
inside my Audio Controlpanel i set the Flexijack setting to Line-In and plugged in my XBOX360.
it worked, and i got sound but.... i have a echo in my XBOX360 Sound... my normal PC Sound is still echo-free ...
maybe someone here got a same problem and know how to fixx it's
i hope you guys can help me out.
Kind regards,
Tobi

WHi,
It would help if you can provide the exact error message or a screenshot.
You might want to find out from the seller if this sound card came pre-installed along with the PC (OEM) or if he purchased it separately. Alternati'vely, please provide the model number of the sound card.

Problems setting up Soundblaster X-Fi Xtreme Music card with Logitech Z-5500 Speak

I have searched a lot for information on this and I have been unable to find a solution to
my problem. I recently purchased a new Dell PC with the following items: Soundblaster X-Fi Xtreme Music sound card and Logitech Z-5500 speakers. However, when I tried to connect the 3 analog wires from the central unit into my sound card, only one of them will work at a time. In other words, only one set of speakers will play anything. I am not sure what other options I have. Someone from Best Buy said I needed the box that comes with the Platinum version of X-fi Xtreme but I am not sure where I can order this from. Is it sold seperately anywhere? Clearly I am not going to order another of the same sound card and pay another $200 when the only thing I need is the box. Any suggestions on how to solve this dilemma would be extremely appreciated.

You might want to reinstall the drivers, because it looks like your default speaker settings are set to 2. or whatever non 5. setting it was on. This is because whenever you click on the default settings button, it will reset the speaker setting back to the non-5. speaker setting. Actually, you can do a custom uninstall of the card and just uninstall the volume panel. Then reinstall it. It should ask you what default speaker setting you desire. Set it to 5.. That way you don't have to worry about it defaulting to the wrong speaker settings.

Problem with logitech Z-5500 with Creative X-Fi when connecting SPDIF

Hi all,
I just purched Logitech Z-5500 speakers and Creative X-FI Titanium and plugged it using SPDIF connection (optical).
I configured everything in my computer to work with SPDIF but still i see in the Z-5500 monitor that it's "Stereo" and i cannot hear DST or surround. The rear speakers do not work!
how should i configure it's
In my previous Realtek audio card i had an option for "speaker fill" and then i got good surround (but not with optical connection).

Hello Visionblind,
You might want to check out this thread.

Optical Input on Creative Labs Sound Blaster X-Fi Xtreme Audio PCI-E with Logitech z-5

So i plugged in my Optical cord into my new sound card the Creative Labs Sound Blaster X-Fi Xtreme Audio PCI-E and it worked only in the Front right, Front left, Front centre, and the subwoofer. Now i hear i need a external decoder... but then again that my sound card should decode it as well... the place i bought my card recemended a optical cord for my card?with the?speakers i have?(the?Logitech Z-5500) How much are decoders? What should i do next? Creative seams to have limited support especialy on optical inputs.

I must have answered something like that in another thread sometime ago, but here goes:
A single SPDIF connection, optical or coaxial, will only transfer stereo in analog form; no rear or centre channels!
There are two ways you can get all speakers playing via such a connection:
() Get your speakers to upmix the audio source to play on all fi've of them
(2) Output a Dolby Digital (AC3) or DTS signal. These contain the multichannel information encoded in the stereo signal. A suitable decoder (such as the one contained in the Z-5500) will be able to analyze the signal. Unfortunately, this is something you can mostly find in movies.
So, to sum it up, no natural everyday multichannel sound over one SPDIF (e.g. no EAX, directsound3d etc.)

Problems with my Creative Sound Blaster X-Fi Xtreme Gamer bulk P

Hey there!!!
I acutally have a Problem with my Creative Sound Blaster X-Fi Xtreme Gamer bulk PCI-Card. The Card by it self is working perfectly. But i cant use the Digital-In as the Mic in. I dont know how to turn it so that the Digital-In is the Mic-In. So my Microphone donst work. I hear everything but nobody hears my Voice. There is sometimes a Signal but not the correct, the Guys playing with me dont hear anything of my voice...
Can somebody help me plz?
Greetings Thomas

Moep wrote:
Why i must use TORRENT?
Why is this driver not on your page?!
Please fast help...
and this is a secure download you mean? ....
Jeez, calm down already. I never said you HAD to download it, but if you want any of the applications that work in XP to work in Vista then you're going to need that disk; either by downloading it or fromk here,?http://us.creative.com/products/prod...7&product=6743?
2. ISN'T THIS THE DRIVER FOR ME?! http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=7838Message Edited by Moep on 07-3-20070:7 PM
Maybe you really should take a vallium or something and re-read what I posted, then you may just grasp the fact that that is the exact driver I told you you needed.

Sound very distorted at bootup with Creative Sound Blaster X-Fi Xtreme Audio

I have a new HP Pavilion Elite e9180t PC with a Creative Sound Blaster X-Fi Xtreme Audio sound card, an OEM card offered by HP. On two occasions, only two, so far, when the system is done booting the sound is distorted and it buzzes and hisses periodically. Upon reboot it is fine.
I have no idea what is going on and am concerned that this is a system of a pending failure. Is there something I can check?
Thanks.

I have this exact same system with the exact same problems. I called HP and got a woman who insisted it was all in my head. She didn't say that, but she continuted to tell me that unless she personally heard the problem herself, she could not help me. I told her it didn't happen all the time but usually at bootup and about every 6 hours or so as I was playing games throughout the day. I am a computer professional also, which should be noted, and I have worked tier 3 support for many years so I know how much knowledge a tier 1 support person has, which is what she was. I couldn't understand much of what she said due to the accent, which made it even more frustrating. Additionally, she remotely got on my system and clicked a bunch of things that made absolutely no sense whatsoever to the resolution of the problem. It seemed to me that she was trying to portray herself as "fixing" the problem so that I would agree it was now fixed and move one without her having to send me a new sound card, as I suggested. She asked me the same questions over and over "so what exactly are you hearing?" and "How often does this occur?". After the 4th time my frustration really began to show. Especially after "I'm afraid I have to conclude that there is not a problem with your soundcard if I cannot hear it." and "the diagnostics say the sound card is fine so it must be your speakers" even though I have swapped out the speakers several times and it also occurs on the headphones. Additionally, I bought TWO identical systems, one for me and one for my husband and his does not have the same problem. She tried to tell me that our parts were not identical, even though I opened both computers and I will tell you they certainly ARE identical. She is now calling me in exactly 6 hours because I told her that the issue occurs every 6 hours or so -- clearly she does not understand that that was an estimate of how often it occurs, not an exact timeline. I am really frustrated. She also told me there were no other complaints for this issue and now I find this forum. I also found a similar forum on the creative website. hmmmm. That tells me she was lying. She refused to let me speak to anyone else, also. Where are the award winning service and support technicians in all of this?? I mean, I work with HP from a business perspective all the time and I get better service. I am extremely frustrated.

Sound Blaster X-FI Xtreme Gamer Fatal1ty Pro problem

Hello,
I own a Sound Blaster X-FI Xtreme Gamer Fatalty Pro and I have a problem with it. If I want to switch to speakers or headphones, by removing the jack and inserting another one back to the sound card, the sounds stops, or it emits a sounds like when someone connected to an ECG dies. I can only swap headphones with speakers and viceversa when the computer is shut off.
Can you please help me?

Hi,
Did this happen right out of the box or do you own the card for some time now?
Just in case, please ensure that the sound card is firmly seated on the pci slot.

Sound Blaster X-Fi Xtreme Audio: Mic Interfere

I have an ASUS P5B-Deluxe WiFi AP motherboard which I had a few problems with to begin with and had to RMA two different boards back to eBuyer (bad memory controller & broken battery holder)
The problem is when I speak over the microphone to friends they report a train sound coming from my end. When I try recording using the built in XP sound recorder I can replicate the train sound. It sounds like bad interference/crackling. This is random though because when I stop the recording and start it again it can be fine until I restart it again. I have tried on many occasions uninstalling and reinstalling the drivers and even installing older drivers. I have even tried every possible configuration within SoundMAX the tool where you configure the on board sound. I have tried various microphones including a superbeam microphone provided with the motherboard and a Logitech headset with a microphone. I have tried disabling microphone boost and muting every other sound channel expect for my left and right speaker.
I became fed up so I decided to buy a Creative Sound Blaster X-Fi Xtreme Audio sound card thinking that would be the end of my mic problems (Yes i did uninstall everything related to the on board audio from ASUS and disabled on board audio in BIOS). Last week I ditched my on board audio for a Creative X-Fi sound card from Scan.co.uk. It worked instantly out the box, I installed the drivers that were provided on the CD that came with the sound card. The auto updater then update the drivers to the latest. However up until today the problem has started with the Creative card. It started with a friend saying he could hear train like sounds coming from my mic in game and I decided to check it out with Windows sound recorded and in fact the problem has resurfaced. I can record fine up until I stop and start again. Occasionally when I restart recording the interference/high pitched noise starts, I can tell by the graphic line moving up and down without me making any sound.
For peoples viewing pleasure I saved a raw sound recording from Windows Sound Recorder tool http://rapidshare.com/files/6566423/interference.wav
I am starting to think this problem may be related to my case fans. I have them on the medium setting, 3x20mm fans and a 200mm fan on the top of my case.
Here are my system specs:
Motherboard: ASUS P5B-Deluxe WiFi
Processor: Intel E6600
Memory: 2xGB Corsair PC-6400 at 5-5-5-2
Power Supply: Corsair 520W
Case: Antec 900
Help would be appreciated. Thanks

Bump.
I am having this issue as well.
Got an eVGA nForce 680i MoBo, never had other problems with it.
This is the second problem I have with my Xtreme Audio, and should nobody have a response, I will be sending it back where it came from.
I am sick of the terrible support Creative offers. :-(

Sound Blaster X-Fi Xtreme Music Bass level control in THX setup cons

hi, i have a Sound Blaster X-Fi Xtreme Music, plugged in to a Logitech X-530 speaker system. The problem i'm having its in the bass redirection controls in THX setup console... The crossover frequency works fine, but i can't control the subwoofer level, i tried it a few days ago and it worked, it was the first and last time it worked... any help?

Hello, I know this is un related but I require your help. Im on the same setup as you but I have the next speakers up the X 540. However the sound card seems to be louder on the left than the right. Is this something to do with the Crossover you mentioned?
Thanks for you help.
If you can help id be greatful if we could talk on msn?

Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express 1)

Hi, I've recently bought a SB X-Fi Xtreme Audio (PCI Express edition).
Before I address my issue, I'd like to point out that my rig is:
Maximus Extreme (mobo)?
Q6600 (cpu)
ATI4870 (vid card)
4Gigs of DDR3 (ram)
and my OS is Vista Home Edition (32 bit precision)?
And so after physically installing the hardware, I quickly installed everything there was on the CD- this included the drivers available on the CD. After this installation, I restarted then found most recent updates via online sources (creative.com). But even after all of this, I wasn't able to get my microphone to work. Now from my understanding, the jack is shared between Line-In and Microphone and I'm supposed to configure this setting. And so I tried to do that, but my only problem was that I was unable to use any of the available features. After researching for a few hours I found out that I, appearently have to uninstall everything that I had installed and then reinstall everything from online sources (from creative.com-- latest drivers for vista 32 bit). But even then, I still can't use my mic or configure the settings so that I could use microphone instead of Line-In.
Now going back to my actual question, how do I configure the settings so that I could use Microphone instead of Line-In?

ERe: Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express )[ Bumping.
Almost the same problem here.
Sound Blaster X-Fi Xtreme Audio edition, Windows 7 64bit.
I downloaded the latest driver from the Creative site, installed it, update with the update manager and then i installed the console.
Issue number : I DONT have your same console. I dont have a "Mode" button, im stuck in Entertainment Mode. I cant control almost nothing and i dont have all the options u have.
Issue number 2: My mic isnt working good. It's VERY low on volume, i cant be heard without the +20db boost (the only boost option i have, i cant boost more) and even with that acti've that's not that loud.
It is still working good with my onboard realtek soundcard. I cant understand what's the problem and how to solve it.
Ah, my headset is a Creative Fatality.

Creative Sound Blaster X-Fi Xtreme Audio: Many issues I have been faci

Hello everyone. This is my first post at these forums, with the hopes of getting my issues resolved once and for all.
First and foremost, let me inform you that I have very high experience with computer hardware.
A couple weeks ago, I bought a Creative Sound Blaster X-Fi Xtreme Audio sound card from a local retailer. (Yes, I am aware that this is not an actual X-Fi card with the designated chip). I previously had an onboard sound solution on my motherboard, and uninstalled and removed all of the drivers COMPLETELY before I installed my new sound card. I then opened up my case, and continued with the installation of the card. After I had downloaded and installed all of the latest drivers, I immediately started to notice issues with the card. My MAIN problem is that if I have a specific application open, whatever it may be, one of my headphones, either left or right, will stop producing sound, and then is followed by the second one, which leaves me with no sound output at all. If I restart the application, the problem is temporarily fixed, but then comes back again within a few minutes.
This is VERY irritating to me, seeing as I originally thought the problem was not with the sound card. Believe it or not, I reinstalled my copy of windows over 5 times throughout the course of the last few weeks in hopes of finally fixing the issue. And here I am, on a brand new installation of windows, and the problem STILL persists.
I can assure you all of my hardware is functioning correctly as I have tried 2 other sound cards which have not had any issues like this whatsoever.
Yes, I have read the FAQ, but I couldn't seem to find the solution to my issue there, which is why I am posting it here. Sorry if I sound irritated, but this has bothered me very much and I have been starting to lose a lot of hope in Creative...
Thanks in advance.

Anybody?

Creative Sound Blaster X-Fi Xtreme Audio (PCI-Express) + Vista 32bit an media pla

Hi folks,Maybe someone here can help me with this issue, I recently bought a Creative Sound Blaster X-Fi Xtreme Audio 7. Sound Card - OEM (PCI-Express), it arri'ved with the cd with software and drivers on it and i installed it into my vista 32bit without any problems.On rebooting my sound was working normally and as far as i could tell all was great untill that is i went to play some mp3 using windows media player, wmp kept telling me it couldnt play the file type then i tried to play a wma file an got the same thing, basically almost all audio types will no longer play in wmp. I rolled back the driver to use the microsoft driver (high defination audio device) and everything is playing in media player again.Only now i cant use the software suppiled with the card. Anyone have any idea how to use the creative driver and get wmp to play properly thanks in advance.
(in addition) after some messing around with various settings i discovered that this seems to be caused by the sb enhancements, when i disable them in speaker properties wmp plays as it should, althought i am rather disappointed that i have to disable the features on the card inorder to get it to work properly.

Hi Orion,
You might want to get in touch with support to enquire about the CD.

Sound Blaster X-Fi Xtreme Audio + Digital I/O mod

I have a Sound Blaster X-Fi Xtreme Audio which I recently bought together with Logitech Z-5500 system to get surround sound. First I was surprised it only had analog output, but then i saw there was a digital output, but i needed to buy more **bleep** to use it. So I bought the I/O module, got it home today, and I tried to use it with an optical toslink cable. However, it didn't work, and when I looked on the website it seems the module is not capable with my card?! I thought i checked it, but I probably just took for granted it would in fact work since the card has one of these digital I/O outputs on the backside.
So, have I now thrown away both the money for the card and for the I/O module or am I just too stupid to make it work?

It is compatible with your card, but you won't get multichannel audio from sources that aren't already encoded as DD/DTS streams. If you don't get any sound at all check that the flexijack is configured as digital I/O instead of line-in and that it doesn't need to reset with every reboot.

Sound Blaster X-Fi Xtreme Audio Control I/F

I purchased an HP e980t with a Sound Blaster X-Fi Xtreme Audio? board as an option. The system came with Vista OS, and had a very nice interface to the audio system that allowed me to listen to the line-in (external sound system), set effects, etc. The taskbar had an icon for this interface on the extreme right, near where the time and date is displayed.
Problems with the Windows 7 upgrade led me to reinstalling Windows 7. I had assumed that the software downloads from the Creative web site would have the audio I/F software, but I was mistaken.
Where can I find this I/F application? Baring that, how do I listen to what is coming in over the line-in port?
Thanks.

Hi,
Did this sound card came preinstalled along with your HP computer? If so please contact the computer vendor for assistance because the driver and software are usually distributed and customized by them.

Sound Blaster X-Fi Xtreme problem with logitech Z-5500 speake

Similar Messages

Maybe you are looking for