Sound & Bluetooth problems for lenovo G 560

    Sound & Bluetooth problems for lenovo G 560-
Speakers create noise when increase the sound or change window.
Bluetooth icon & drivers dissappear after sometime.(Fn + F5 doesn't work)
They appear again after restart.
Warranty Status Lookup
Product ID:        Type-Model:        Serial number:
59304299        0679-N/A        CBxxxxxxxx
Location:        Expiration date:        
India                  2012-08-31        
Moderator Note; s/n edited for member's own protection

Hi lenovoG60,
Welcome to Lenovo Community!
You may want to try updating all of your machine drivers such as
Lenovo Energy Management (power management)
Bluetooth drivers
Sound card drivers
Chipset drivers
Look for the drivers from our support site.
Best regards,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • [REQUEST] rtl8723au_bt bluetooth driver for lenovo yoga 13

    Hello.
    I have a lenovo yoga 13 laptop with 8723 wireless card.
    Wifi is working bacause of dkms-8723au-git package. As I know, in 3.15 kernel it will work out of the box and lwfinger will no longer maintain this source code.
    Bluetooth is not working and there is no bluetooth driver in aur. It is required to install another package from here https://github.com/lwfinger/rtl8723au_bt.
    I cannot build this package, because when I run make command it ends with error make[1]: *** /lib/modules/3.14.4-1-ARCH/build: No such file or directory. Also there was written about no dkms support in code. But I cannot fix it, because I am still noob in Archlinux. And for some reason it is written "Support kernel version 2.6.32~3.13.0" in readme.txt. I have already 3.14.4-1-ARCH kernel.
    Could anyone help me to fix that and make aur package for other people to get  bluetooth work on lenovo yoga 13?

    I think bluez5 is ok, because when I run bluetoothctl it can detect my cluetooth controller now. However, I cannot start working with it
    [ndr@yoga ~]$ sudo bluetoothctl
    [sudo] password for ndr:
    [NEW] Controller 2C:D0:5A:DF:60:07 yoga [default]
    [bluetooth]# help
    Available commands:
    list List available controllers
    show [ctrl] Controller information
    select <ctrl> Select default controller
    devices List available devices
    paired-devices List paired devices
    power <on/off> Set controller power
    pairable <on/off> Set controller pairable mode
    discoverable <on/off> Set controller discoverable mode
    agent <on/off/capability> Enable/disable agent with given capability
    default-agent Set agent as the default one
    scan <on/off> Scan for devices
    info <dev> Device information
    pair <dev> Pair with device
    trust <dev> Trust device
    untrust <dev> Untrust device
    block <dev> Block device
    unblock <dev> Unblock device
    remove <dev> Remove device
    connect <dev> Connect device
    disconnect <dev> Disconnect device
    version Display version
    quit Quit program
    [bluetooth]# version
    Version 5.19
    [bluetooth]# power on
    Failed to set power on: org.bluez.Error.Blocked
    [bluetooth]# list
    Controller 2C:D0:5A:DF:60:07 yoga [default]
    [bluetooth]# devices
    [bluetooth]# show
    Controller 2C:D0:5A:DF:60:07
    Name: yoga
    Alias: yoga
    Class: 0x000000
    Powered: no
    Discoverable: no
    Pairable: yes
    UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
    UUID: Generic Access Profile (00001800-0000-1000-8000-00805f9b34fb)
    UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
    UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb)
    UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
    Modalias: usb:v1D6Bp0246d0513
    Discovering: no
    [bluetooth]# select 2C:D0:5A:DF:60:07
    [bluetooth]# power on
    Failed to set power on: org.bluez.Error.Blocked
    [DEL ] Controller 2C:D0:5A:DF:60:07 yoga [default]
    [NEW] Controller 2C:D0:5A:DF:60:07 yoga [default]
    [bluetooth]#
    Ok, it is not powered on. In troubleshooting section in wiki there are some instructions about such situation. I do all as described in wiki:
    [ndr@yoga ~]$ hciconfig -a
    hci0: Type: BR/EDR Bus: USB
    BD Address: 2C:D0:5A:DF:60:07 ACL MTU: 820:8 SCO MTU: 255:16
    [b]DOWN[/b]
    RX bytes:558 acl:0 sco:0 events:28 errors:0
    TX bytes:355 acl:0 sco:0 commands:28 errors:0
    Features: 0xff 0xfb 0xff 0xfe 0xdb 0xff 0x7b 0x87
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
    Link policy: RSWITCH HOLD SNIFF PARK
    Link mode: SLAVE ACCEPT
    [ndr@yoga ~]$ hciconfig -a hci0 up
    Can't init device hci0: Operation not permitted (1)
    [ndr@yoga ~]$ sudo hciconfig -a hci0 up
    [sudo] password for ndr:
    Can't init device hci0: Operation not possible due to RF-kill (132)
    [ndr@yoga ~]$ rfkill unblock all
    bash: rfkill: command not found
    Could you please tell me where to dig next. Why there is not rfkill command?

  • INBUILT BLUETOOTH PROBLEM FOR 3250 HELP NEEDED

    HI I HAVE BROUGHT THIS MODEL NOKIA 3250 2 MONTHS BACK BUT NOW ALL OF A SUDDEN THE BLUEOOTH IS NOT WORKING I HAVE UPDATED THE PC SUIT SOFTWARE ALSO THE NEW VERSION BUT MY PHONE SAYS UNABLE TO PERFORM BLUETOOTH OPERATION CAN NAY ONE PROVIDE ME A SOLUTION FOR THIS

    Hello Jason, Thanks for your reply, when I click the speaker test thing on my RealTek Panel (http://img523.imageshack.us/img523/9499/oliver2007aug2800sr9.jpg) the rear speakers work fine, it's just whenever I'm listening to music or playing a game the audio doesn't come out the rear two speakers. Thanks!
    Oli'ver

  • [solved] Some programs cause problems for sound in other programs.

    Today I noticed that audio has stopped working in some applications, but not others. The programs that I know where it doesn't work are:
    Hotline Miami (game)
    VLC
    Dungeons of Dredmor (game)
    Uplink (game)
    Programs where I know it works are:
    mplayer / smplayer (on the same files where vlc does not work)
    mpd
    Programs run through wine
    Standalone flash player and the firefox flash plugin
    Additionally, when I run a program where audio doesn't work, I have to restart programs where it does. For example, I'll pause mpd, open Hotline Miami, and then quit. When I try to unpause mpd, I'll get the error message "Failed to open audio output". But if I try a couple times, it will eventually resume. It's a similar situation for mplayer. I'll have to quit and restart mplayer a couple times after trying one of the other programs before audio will work.
    Further complicating the matter is that there are no error messages for the programs where audio does not work. I can't seem to track down the problem. I also don't do much with sound beyond using mpd and mplayer, so I don't know when this started.
    My hardware is a Lenovo IdeaPad z580 with integrated Intel HDA audio.
    EDIT: I just noticed that the problem is not what I thought. Part of the problem was simply due to volume. So I can get sound in the listed programs. However, running those programs does still cause the problem for the mplayer and mpd where I have to restart them.
    Last edited by mathfreak (2014-03-10 13:27:10)

    Gah. It does appear to have been a pulseaudio thing. I hadn't even realized it was installed, let alone running. I've fixed it. Thanks for the help! And thanks, brebs, for the asoundrc file. I think it'll help a lot.

  • Hard problem with audio device installing for Lenovo G430 t6600

    Dear all,
    as I read about this problem from many messages in this forum, I have the same problem when install audio device for Lenovo G430. I want to write this message and hope that someone can help and show me the detail way to fix this problem and this is also to help others customers of Lenovo.
    Sure that I did all the ways that messages in this forum showed to fix:
    First, I downloaded hotfix - patch and Conexant Smart audio drive files which suitable with my model-type of laptop (G430, use win XP SP2), these files I downloaded from Lenovo website.
    Then I uninstall all audio devices from my Laptop
    install Hotfix first, and then, I install Conexant Smart audio 
    But, in the end I received the message: could not find the media device...blap blap and of course, my laptop keep...have no any sound
    If Lenovo G430 support for Win Vistra, why my Laptop had a normal situation (all drives were installed, and the sound was good) when I bought it and the laptop run Win XP SP2. I had this problem when I re-install sound drive from the drive disk the supplier deliver to me, after this, my laptop have no sound any more!!.
    So, please, if someone (and maybe the supporter-computer technician from Lenovo) can help me and other customers(who have this problem) to solve and fix  with a detail way, we will say many thanks. This problem made me feel Lenovo is a hard laptop to use.
    please contact to me through email: [email protected] Thank you very much 

    P.S.: The firewire hub was labeled to be OS X compatible ... Is there any specific data available a firewire hub should meet so that there are absolutely no problems in OS X 10.4?
    THX!

  • Lenovo ideapad yoga 13 pci data acqusition and signal processing center for problem for windows 8

    Link to picture
    hi everyone, 
    find original w8 cd and then i installed, when i was installing
    i deleted all recovery and other partition, i did not think what can i do,
    but then i activated windows and installed all driver, but i taking 
    after all drivers it stayed
    2''unknown devices''
    and when i rebooted, it says, usb device not recognized'' and also
    ''pci data acquisition and signal processing center'' devices problem for windows 8. and touchscreen not working.
    i read related for w7 same problem, but what i will do now ?
      thanks.
    Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

    hi adilsefaersan,
    Welcome to Lenovo Community Forums!
    By opening your Device Manager right click on one unknown device and choose properties,
        >On the properties windows Click on the Details Tab, on the property drop down Choose hadware IDs
         > then copy the value and post back here whats on the Value pane
    Do it for all those unknown Device and Post here the Value of the hardware ids
    also can you share your Windows Version and bit type so we'll knwo the correct download page for you
    Thanks and Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
    I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
    Next step is to pan that pink noise around with my SPL meter to calibrate the room.

  • ForA1354477: problem with realtek sound driver download for windows 7

    I recently did a clean install of windows 7 enterprise and I lost the option on the sound recording page for stereo mix.  I found a driver update on the toshiba website for my machines realtek sound driver for windows 7 so I tried it and it worked (sort of).  Now I have the stereo mix option set as default but I also cannot make any changes in the sound recording page (the tabs are nor functioning and my cursor spins it's little processing circle when it is over the page).  I can't even close the page without using the option from the task bar and sometimes that fails so I have to use the task manager to close the page.  Anyone else have this problem?

    Satellite A135-S4477 
    These two drivers should work for your Windows 7. Although they carry the same version and date, they are different files with different sizes. Try them both.
       Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
       Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
    -Jerry

  • Lenovo G470 Wifi and Bluetooth problem, with drivers maybe?? help..

    Hi all, 
    Please.. could anyone give solutions for me to enable wifi and bluetooth for Lenovo G470, i5 2520, intelHD3000, 8gb ram, 500gb..running on windows 8 pro 64 bit, (maybe could give a link to working drivers), everything else is great but wifi and bluetooth, (not yet try one key recovery and veriface though)
    ps, I've already download latests driver from lenovo support but still not working...and tried wifi bluetooth drivers for win7 64, but its not working also, previously run on windows 7 starter 32bit, wifi n bluetooth runs perfect.
    thank you

    Hi dendie701,
    Thanks for posting and welcome to the Lenovo Community,
    I’d like to help you with your issue,
    Can you please check the below links for the Drivers for the wireless and the Bluetooth for your machine and we can install them a fresh installation:
    For the wireless:
    http://support.lenovo.com/en_EG/downloads/detail.page?DocID=DS031019
    http://support.lenovo.com/en_EG/downloads/detail.page?DocID=DS031021
    http://support.lenovo.com/en_EG/downloads/detail.page?DocID=DS031020
    Can you try to download them and try again to Turn on the wireless and connect,
    But regarding the Bluetooth I’d like to ask you your machine came pre-loaded with windows 7?
    And  please share with us the details of the Drivers in the Device manager if there's any sign on the drivers?
    Thanks and Best Regards,
    Soha
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • The maximum SOUND level is low on iPad mini retina, compared to an iPhone 4s. Research shows this is a common problem for this model around the world. Has anyone succeeded in solving this issue? Many Thanks, Peter.

    The maximum SOUND level is low on iPad mini retina, compared to an iPhone 4s. Research shows this is a common problem for this model around the world. Has anyone succeeded in solving this issue? Many Thanks, Peter.

    The maximum SOUND level is low on iPad mini retina, compared to an iPhone 4s. Research shows this is a common problem for this model around the world. Has anyone succeeded in solving this issue? Many Thanks, Peter.

  • I still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

    i still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

    JoBautista,
    you still have the option (before your warranty expires) of purchasing an AppleCare Protection Plan, which will provide an additional two years of coverage. Once your warranty expires, you will no longer have the option of purchasing AppleCare.

  • Lenovo V 560 major Wifi & Graphics problems!

    Hello, i am new here. Last week i bought a Lenovo V 560 Laptop. I have been having problems since then..
    The first and biggest problem is the WiFi, i cant get it to work, tried everything and a bunch of drivers. I am no expert but no newbie either. I consider myself a smart dude but i cant beat this!
    The system cant find any wifi network and in the system manager i have a yellow dot on the "Network controller" and cant find a driver who works there.
    I am running Windows 7 now.
    Second problem is that the computer say i have two graphic cards, the Intel HD Graphic and the Invidia M300 graphic card, but the system and the monitor only recognise the VGA Standard screen, and its not possible to switch in Bios...
    Anyone good on this stuff here ?
    Thanks in advance

    hey Roberto36,
    i recommend going to this link : http://consumersupport.lenovo.com/us/en/DriversDow​nloads/drivers_list.aspx?CategoryID=607595
    and update all your drivers accordingly.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Bluetooth problem in ideapad s210 touch windows 8.1 and audio problem

    Hi .. i have lenovo s 210
    i have a problem with audio output, the sound is muted and it said that my bluetooth audio device can not be started. i download realtek High definition from the support system and the audio system start working again. But when i check the device manager the bluetooth problem still not fixed. It said i had a code 10 problem. I just recently update my windows to 8.1, but before there is no problem with the audio... and recently i find out that i can not use my bluetooth too. and all the bluetooth system seems doesn't work out
    what should i do??
    thanks

    Actually, I solved this issue myself after a while.
    I induced a system restore prior to the date when I began to experience this error.
    It then happened once more, so I went to the "PC Settings" menu and selected "Update and recovery".
    There were apparently updates to be installed, so I clicked "More details/information", and found that there were 3 Intel-related drivers that were listed, but for some reason, Windows 8 didn't automatically install them, so I checked each one of them and proceeded to install them and it has been smooth sailing for me ever since that.
    SO.
    A piece of advice for all those who have experienced the issue I detailed in my former post:
    Check what updates need to be installed on your computer in the "PC Settings" app thing, and see if there are any driver-realted updates (like for your graphics card, especially).

  • E93z Win 8.1 Bluetooth problems

    Hoping someone can help provide some direction on an issue I am having with bluetooth devices for my system. 
    Just purchased my e93z AIO system, and immediately upgraded Windows to 8.1. 
    I have performed all necessary driver updates, but seem to be encountering bluetooth connectivity issues. 
    My system has a hard time even finding bluetooth devices, and if it even can establish a connection (most of the time it cannot), the connection is very weak. For example, if connecting my Thinkpad bluetooth laser mouse, the movement of the mouse cursor is very spotty. If I connect my bluetooth speaker, the sound skips in/out, and the connection fails shortly afterwards. (I know these two devices work well otherwise). 
    With all drivers updated, I am at a loss of where to go from here. 

    Davepr wrote:
    JWBlue,
    Would you mind expanding on this slightly? When you say unistall the device, would I be going into my device drivers, and unistall each item under the bluetooth area?
    Before doing any of this, I would create a System Restore restore point.  If something happens, then the system can be brought back to where it was before.
    To uninstall:
    > Control Panel
    > Device Manager
    > "+" next to the device 
    > Right click on the device
    > Properties
    > Driver
    > Uninstall
    > Box next to "Delete ......"
    > OK
     Repeat for all devices including Bluetooth istelf.
    2> Before rebooting, the devices might still be listed under Devices and Printers and should be removed.  I am not sure if uninstalling will do it, but it might not.  I would double check.
    > Control Panel
    > Devices and Printers
    > If listed, on device mouse right click
    > Remove device
    For installing Bluetooth:
    The E93z has Broadcom Bluetooth.  I would try the driver directly from that site.  Sometimes the one from Lenovo might not be the latest or has additional software. 
    Reboot the computer.
    Run install for latest drivers for all devices.
    Does this work?
    Machine Type: M90z AIO ; Product: 3091CTO (Custom), CPU: i5-650, Video Card: Intel(R) HD Graphics, Memory: 4.00 GB,
    Network Card: Intel(R) WiFi Link 1000 BGN, OS: Windows 7 Professional 64-bit

  • Bluetooth problem on iOS 6!

    I have Beats Wireless, and since upgrading to iOS 6, has presented problems with the bluetooth connection. I was wondering if anyone has this problem and if Apple will make a new update to fix this problem.
    Thank You.

    I have bluetooth problem with Creative Sound Blasteraxx SBX 20 when I upgraded iphone4, ipad2 and ipad3 to ios 6.
    There seemed the bluetooth session is prone to some interruptions. The music stopped playing but the bluetooth session is inact. The sound blaster has blue led and iphone4 show " connected". I will to reset by turning off the bluetooth and reconnect again. Then only will the music from iphone4 is played at sound blasteraxx SBX20. I have to kept doing this again and again when the music stopped. This does not happen before the upgrade. I used Creative BT-D5 a bluetooth socket connector to iphone4 and paired it with Sound Blasteraxx SBX20. I played for hours without any session being lost. I have seen iphone wifi suddenly went from "connected" to " not connected" in iphone4 setting. Before upgrade the disconnection would never appear on its own. I suspect the ios bluetooth and wifi are prone to interruption and they cannot prrform automatically recovery. It needs manual reset to get bluetooth and wifi working.

Maybe you are looking for

  • How to export contacts and change vcf to csv file

    I need to export the contacts so I can make updates and import them into my marketing system. iCloud exports in only ,vcf, which cannot be imported anywhere I can find.( that is the entire file, not one contact at a time)  I am very frustrated and do

  • Connect laptop to additon 2 external monitor

    I have HP laptop with 1 HDMI & 3 USP & 2 HP monitor. How do I connect them to have total of 3 screen. Whats connection I need get for hook up. Thanks

  • Connecting Shuffle to phone system and dock

    A friend of mine who works for a local non profit outfit wants to use an mp3 player to provide music for her voice mail system. She's considering a shuffle, but she wants the music playing 24/7, literally all the time. You can't simultaneously connec

  • My ipod won't turn back on, what do i do?

    i need help , please tell me how to fix this.. holding down the home/sleep buttons don't work

  • Reduce margins for text only in Pages

    I need to reduce the 1-inch default left and right margins in iWorks '06 to half an inch (.5 in) in the blank template, using only text. I ploughed through the user manual but can't find anything on how to solve that problem. I did see a template wit