Sound broken after 10.10.3 upgrade

Lost all sound output devices in sound preference pane after upgrade to 10.10.3 on a
Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3 GHz
Number of Processors: 2
Total Number of Cores: 8
L2 Cache (per Processor): 12 MB
Memory: 8 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
Two clean installs on two different drives yields same result. Devices are available on 10.10 and gone on 10.10.3.
Rebooted, cleaned caches, fixed permissions on both drives.
Model Name: Mac Pro

Sound – No Sound After Upgrade (2)
Sound – can’t hear sound from speaker - Yosemite
Sound Levels - Troubleshoot
Sound – Troubleshooting Internal Speakers

Similar Messages

Sound problems after iOS 4.2 upgrade

Experiencing very poor sound quality after iOS 4.2 upgrade. Bad eq, left channel dropping out, sounds like heavy reverb. Exists with iPod and pandora apps. Tried adjusting eq in settings. Any one else having problems?

Yep I just upgraded to new OS 4.2 on iPhone 4 and I get this static buzz sound when talking to people it's really annoying and sound quality is terrible. What happened? I went back to the shop and they said it's the upgrade and that there is an issue with it. They also said there is no point leaving the phone with them as they can't fix it that it's upto apple to release a patch for the problem. Can we get a fix for this soon before I damage my ears?

[SOLVED] Another "Sound broken after upgrade" thread

Hi. My sound stopped working at some point, probably after an upgrade. I've seen lot's of posts about this in the last month, but nothing is helping. My guess is that OSS is screwing with ALSA. Here is what it says in my pacman log.
Running OSS update script...
[2011-12-05 13:34]
[2011-12-05 13:34] -------------------------------------------------------------
[2011-12-05 13:34] Open Sound System was updated. Now you should restart the
[2011-12-05 13:34] daemon by running /etc/rc.d/oss restart.
[2011-12-05 13:34]
[2011-12-05 13:34] Please note that OSS stores some of its configuration files
[2011-12-05 13:34] at /usr/lib/oss. If you are upgrading from an older OSS
[2011-12-05 13:34] release and it doesn't work properly, try removing that
[2011-12-05 13:34] directory and reinstall this package.
[2011-12-05 13:34] -------------------------------------------------------------
[2011-12-05 13:34] upgraded oss (4.2_2005-1 -> 4.2_2005-2)
I tried removing the directory and reinstalling oss, but that didn't work. I also tried removing oss altogether, but pacman says that lib32-libflashsupport: requires oss. So I'm not sure what to do. I was trying this
http://wiki.archbang.org/index.php?titl … _with_Alsa
but I got the dependency conflict with libflashsupport.
What I want to do is force remove oss via pacman -Rf oss, then install the alsa-oss emulator, but I'm not sure if that will break something else.
I'm also willing to just wait and see if the next kernel update will fix it, if that doesn't take too long. I don't really use sound very often anyway, but I still want it to work. I'm running this kernel
Linux version 3.1.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20111125 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011
Thanks for any help.
Last edited by Pacopag (2012-01-09 14:57:18)

Sorry for bumping this rather useless post. But I just wanted to mention that the problem is fixed. What I did was to follow the link
http://wiki.archbang.org/index.php?titl … _with_Alsa
(but I don't know that even has anything to do with the solution, because the sound didn't work after doing this.)
But then, just today, there was a kernel upgrade, and now the sound works. Big thanks to the arch team.
Last edited by Pacopag (2012-01-09 14:56:41)

Bookmark Bar RSS Counts Broken after 5.1.4 upgrade

Ever since upgrading to 5.1.4 none of the RSS feeds saved in my bookmarks bar are reporting the new post counts properly.
New posts are not being shown in the bookmarks bar.
After clicking on a feed the count shows up, and then won't be dismissed no matter how many times it is viewed.
If I use "View All RSS Articles" for a folder it clears the bar count, but then all the individual feeds are still badged with a count that can't be dismissed.
Is there a fix for this, or do I have to revert to an older version and hope that the next Safari update will address this?
(and please, no alternate browser recommendations)

Hi,
Try troubleshooting the Safari .plist file (preferences)
Quit Safari.
Go to ~/Library/Preferences
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop.
Relaunch Safari. If that helped, move the .plist file to the Trash. If not, move it back to the Preferences folder.
If that didn't work, go to ~/Library/Caches/com.apple.Safari/Cache.db
Move the Cache.db file to the Trash. Quit then relaunch Safari to test.
~ (Tilde) character represents the Home folder.

Remote Desktop 2.2 broken after 10.4.6 upgrade

I can't remotely control 10.4.6 clients (PPC). All I get is mainly a black screen and sometimes slight "static" where there're text input boxes. I've been able to replicate this twice. I can see a 10.4.5 client perfectly, then after upgrading the client to 10.4.6, I get the problem.
I'm running the admin program on a 10.4.6 Powerbook G4.

Please re-Update using the downloaded Combination updater. (Apple downloads)
If that doesn't help, the only other thing I can recommend is to resinstall OS X using the archive & install option in the installer.

Finder sidebar broken after 10.5.6 upgrade

Hallo everyone
After upgrading my MacPro using the full combo update, I have the following problem with the Finder:
If you collapse all disclosure triangles on the sidebar and expnad them again, the display of all icons and labels is completly messed up.
Labels are overlapping and clicking does break the highlighted rows.
Can somebody confirm they have the same issue?
Thanks
Patrick

Patrick,
You may want to refresh the Sidebar plist file by dragging the com.apple.sidebarlists.plist file which is located in your Macintosh HD/Users/yourusername/Library/Preferences folder to the Desktop. Then log out/in or restart and confirm your settings in Finder>Preferences...>Sidebar
;~)

Pavilion g6 1332el sound cracking after Windows 8 pro upgrade

Hello, please help. I've upgraded from 7 to Windows 8, everything is fine but not the sound, that cracks and run slowly. I've upgraded drivers, but the problem is there. Please help me. Mario

help please

Time Machine broken after 10.6 server upgrade

I recently upgraded our Mac Pro running 10.5 Leopard server to 10.6 Snow Leopard server, I just popped the disk in and ran the installer. The upgrade seemed to go fine, this is just a file server, and everything seems to function just as it had in OS 10.5, except for Time Machine. TM did not pickup where it left off with the internal TM drive for the server (not entirely unexpected). With no luck I've tried:
Erasing and repartitioning the drive (after turning TM off and deleting the preference file)
Removing the drive and erasing and partitioning on another computer, then trying TM through a USB connection (after turning TM off and deleting the preference file)
Below is the common error dialog and part of a log file. If I were to remove the folder/file listed in the log next time it would just be another file. What is consistent is that it doesn't seem to like what's in the Shared Items folder (the sharepoints users attach to).
Can anyone tell me how I might fix this?
--- Sample Log Exerpt ---
com.apple.backupd[23587] Error: (-41) SrcErr:NO Copying /Shared Items/OpenJobs/∂ Jamie's Jobs/misc./Flash/Ex_Files_FlashCS3_BTB/Exercise Files/Chapter 09/03/final/classes/com/lynda/audio/mp3/Mp3Player.as to /Volumes/Server_TM/Backups.backupdb/travelxserve/2011-06-07-091921.inProgress/D 895F019-A328-45B1-A7D4-836231E1A817/ServerHD/Shared Items/OpenJobs/∂ Jamie's Jobs/misc./Flash/Ex_Files_FlashCS3_BTB/Exercise Files/Chapter 09/03/final/classes/com/lynda/audio/mp3
com.apple.backupd[23587] Copied 238 files (116.7 MB) from volume ServerHD.
com.apple.backupd[23587] Copy stage failed with error:11
servermgrd[81] servermgr_backup: TimeMachinePostBackupHook called.
servermgrd[81] servermgr_backup: TimeMachinePostBackupHook done.
com.apple.backupd[23587] Backup failed with error: 11

valoo wrote:
I deleted the newly created sparsebundle. I also realized that the computer name had been changed and I changed it back to the original one. Here's the new problem. The TM says that I only have 127 GB and the amount of space needed to back up the disk is 140GB. I don't understand. It almost seems like it is trying to duplicate the entire backup. And this time around, I don't even see any new sparsebundle. I am stuck here.
Something caused TM to decide to start a new "sequence" of backups, as if you'd gotten a new Mac. That means a new, full backup to start with. The only thing that seems to have worked for some folks is a Restart. So if you haven't done one since the latest changes and failed backup attempt, it's worth a try.
If it still wants to do a full backup, you can't prevent it.
Depending on how much space you have on the TM drive/partition, your only choice may be to delete the "old" sparse bundle and let TM start over.
You may be able to delete some of the older backups to make room for the new, full backup, but that's tedious and time-consuming (see item #12 of the Frequently Asked Questions *User Tip.)*
But that still leaves two problems: you'll have to manually "compact" the sparse bundle via Terminal to shrink it; and you'll have to continue to delete old backups this way (and manually compact them) to make room for new ones. Since TM is treating them as if they were from a different Mac, it won't delete them automatically, but will delete the oldest backups from the new set instead.

Only "Headphones" sound, no speaker sound after 4.2.1 upgrading

After I had finished upgrading 4.2.1 firmware for my iPad, the speaker's sound has gone.
I can hear the sound from my iPad only when I connected to any headphones or bluetooth devices.
I tried many methods to get the sound back, starting from:
1. trying to plug in and out my headphone - nothing changed
2. switch on and off from the mute button (former is lock button) but it only showed "Headphones" or "Mute" sign.
3. shut down and turn on my iPad - nothing changed
4. Hard Reset my iPad and Restore - Still no sound, but I had to re-install everything again
5. Ask everyone and search every "no sound from iPad" topics but found none like mine.
However, while I upgraded the firmware, I noticed that I "locked" the screen during the process and I heard someone in the internet told me that it might be the origin of my problem.
I tried to sync my iPad and find how to re-upgrading the firmware again with no "locked" the button but there is no way to.

I've been having this problem for several months and just found this thread. Unfortunately the solution isn't well spelled out, but I was able to resolve the issue.
To recap:
Problem: Many/most non-Apple Apps have no sound from the iPad internal speaker. Plugging headphones in provides sound from all apps. Apple Apps (youtube, music, video, safari, etc) continue to function and play sound out of internal speakers normally.
Resolution: This issue appears to be related to the 'mute' / screen orientation lock button. If your iPad mute switch was on mute when you switched it to orientation lock, 3rd party apps will remain muted via internal speakers no matter what you do. Luckily an easy fix: Go Settings -> General and switch from 'lock rotation' to mute. Slide the switch to the non-muted position. You can now switch back to 'lock rotation' and your apps will play sound from the internal speaker again!!!

[SOLVED] nfsroot install broken after kernel upgrade 3.5.6 to 3.6.2

It seems my nfsroot installations have broken after the kernel upgrade to 3.6.2.
This is as far as the boot process gets now (hand copied from the screen):
IP-Config: eth0 complete (from 10.48.50.20):
address: 10.48.50.240 broadcast: 10.48.50.255 netmask: 255.255.255.0
gateway: 0.0.0.0 dns0 : 0.0.0.0 dns1: 0.0.0.0
domain : local
rootserver: 10.48.50.20 rootpath:
filename : /var/tftpboot/pxelinux.0
NFS-Mount: 10.48.50.20:/srv/nfs4/kvmhost0-rootfs
Waiting 10 seconds for device /dev/nfs ...
mount: Protocol not supported
:: running cleanup hook [udev]
ERROR: Failed to mount the real root device.
Bailing out, you are on your own. Good luck.
sh: can't access tty; job control turned off
[rootfs /]#
On the server this is what is logged:
Oct 16 21:10:04 tuon dhcpd: DHCPDISCOVER from 00:21:70:eb:02:25 via san
Oct 16 21:10:04 tuon dhcpd: DHCPOFFER on 10.48.50.240 to 00:21:70:eb:02:25 via san
Oct 16 21:10:04 tuon dhcpd: DHCPREQUEST for 10.48.50.240 (10.48.50.20) from 00:21:70:eb:02:25 via san
Oct 16 21:10:04 tuon dhcpd: DHCPACK on 10.48.50.240 to 00:21:70:eb:02:25 via san
Oct 16 21:10:14 tuon rpc.mountd[1323]: authenticated mount request from 10.48.50.240:684 for /srv/nfs4/kvmhost0-rootfs (/srv/nfs4/kvmhost0-rootfs)
Oct 16 21:10:14 tuon rpc.mountd[1323]: refused unmount request from 10.48.50.240 for /new_root (/): not exported
It looks to me like the client is sending the mount request, the server accepts and then for some reason the client thinks it has failed. I can't even see anything strange in the wireshark traces comparing the working client (3.5.6) to the broken one (3.6.2).
Anyone else using nfsroot successfully with the latest kernel?
Any other ideas?
(by the way - despite my directory names, this is using nfs v3 for the rootfs)
Last edited by kmshanah (2012-10-18 03:18:07)

mikep wrote:
Just to confirm that I also have this problem with nfsroot (nfs4 this time) with 3.6.2. Downgrading the kernel does make it go away.
When it is working normally I do seem to get refused unmount messages at shutdown for some reason
refused unmount request from 192.168.1.86 for / (/): not exported
, but the /new_root bit is new and I have no idea where it comes from.
refused unmount request from 192.168.1.86 for /new_root (/): not exported
So I wonder if it asking for the wrong path.
That unmount issue will be solved by FS#32021.
Unfortunately, that doesn't help with mounting in the first place with 3.6.2

Message sound differs after upgrade to ios5

messsage sound differs after upgradded to ios5 please let me know how to do it
andd also reqquired how to downgrade to ios 4.3.3 i dont have shsh

Try "resetting" the device...
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

Sound problems after upgrading

Hi,
After installing the pay upgrade on my iPodTouch last week I can't control the volume. It plays everything on max. There's no way I can use my touch now without losing my hearing. What gives?
thanks
alf

Yeah, a 32 gig.
It's clearly stuck, but no matter what I try, I can't get it to lower. I thought maybe changing the volume limit in the music settings would fix it, but alas, no.
I just don't want to have to reset it, and lose everything on there, although I suppose in the end that's what I might have to do.
Anyway, thanks for your reply.
alf

ADWS Broken after in-place upgrade from Server 2008 R2 to Server 2012 R2

I performed an in-place upgrade from 64-bit Server 2008 R2 to Server 2012 R2. This machine ran Active Directory Web Services. After the upgrade ADWS will not start. I get the following event log error:
Log Name:      Application
Source:        .NET Runtime
Date:          11/21/2014 3:23:02 PM
Event ID:      1026
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      COMPUTER
Description:
Application: Microsoft.ActiveDirectory.WebServices.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.ServiceModel.CommunicationObjectFaultedException
Stack:
   at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
   at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
   at System.Threading.ThreadHelper.ThreadStart(System.Object)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name=".NET Runtime" />
    <EventID Qualifiers="0">1026</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-11-21T20:23:02.000000000Z" />
    <EventRecordID>65596</EventRecordID>
    <Channel>Application</Channel>
    <Computer>COMPUTER</Computer>
    <Security />
</System>
<EventData>
    <Data>Application: Microsoft.ActiveDirectory.WebServices.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.ServiceModel.CommunicationObjectFaultedException
Stack:
   at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
   at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
   at System.Threading.ThreadHelper.ThreadStart(System.Object)
</Data>
</EventData>
</Event>

I compared the registry with a working system but the Counters - and all other keys - looked fine.
At the same time as upgrading a DC a colleague was updating an unrelated server, and he started to see similar events in the event log (but for the Dell OpenManage Essentials service, not ADWS). The error was complaining about KERNELBASE.dll which set my
spider sense tingling. We knew that this server had Windows Updates pending. Fully updating it solved the problem on that server.
I solved the ADWS problem in the end by fully Windows Updating the DC. In particular, the ADWS Service started successfully after installing KB2919355 and rebooting. That also
'unlocked' a further 59 updates pending.
After the in-place upgrade I always fully Windows Update but I'm 99% certain that KB2919355 did NOT show up when I did a Check for Updates straight after a reboot so I thought the DC was up-to-date. I then spent hours investigating the ADWS problem and rebooted
as part of the diagnostics. It was then that I noticed on the logon screen that there were updates pending...
Moral of the story? Windows Update, then Update again, and again, and again. The length of time it takes to Windows Update after an upgrade from 2008R2 to 2012R2 is painful though.

ICal sync with gcal broken after Mountain Lion upgrade

Is anyone else seeing that iCal events created in iCal no longer sync into GCal after the Mountain Lion upgrade?
I'm running OSX 10.8 and iCal 6.
I have a google calendar account configured in iCal, and iCal has no problems reading/sync'ing events that are created directly in Google Calendar. It also has no problems seeing free/busy information of people in my Google Calendar account when I create a new event in iCal. However, when I create an event in iCal, the event never ends up in Google Calendar.
This problem didn't used to exist before I upgraded to Mountain Lion. I haven't changed anything in the settings since my upgrade.
The problem doesn't exist in my iPhone, which is still working properly.
Thanks,
Bob

http://productforums.google.com/forum/#!topic/calendar/X5EAUGxemic%5B1-25%5D
The problem seems to be in the Delegates. I followed the instructions in the above, setting up google calendars as CalDAV and using the calendar ID. But tedious but at least its working until apple get their act together and fix it!

Dictation problems after ios 8.2 upgrade

I rely heavily upon dictation.   2 problems occur (at minimum) after ios 8.2 upgrade to iphone 6. .
1. I wasnt going to add this dictation bug (feature ;-)) b/c couldnt reproduce the seemingly safari bug when got home, but as I was dictating my first sentence for defect here, it happens in this text box on any line. :-(.
    1. Problem is as soon as dictation types in word Or words, when I hit done, it erases what was just dictated! Happens on even just ine word. (So having to manually type all of this n I stink at typing ie, time consuming).
    2. I can paste characters from noteoad into here...so must be dictation relateD...it seems.
2. In the calendar textbox, when I dictate a new event (doesnt happen in location textbox) and the last character before it fills up the end of textbox (just before the "x"), it automatically does "done" for me (the beep sounds), it stops dictating, but more annoying is it will no longer allow me to continue dictating in that new event's top textbox. That means I HAVE to type n I stink at that. To reproduce I simply:
1. press the microphone.
2. Type in only numerics 1 thru 17....it will dictate to look like this: 123 456-789-1011 1213 1415 1617
3. "Beep/dong" noise because it hits the end of characters alowed it seems n decides it is "Done".
4. press the microphone
   5. "Beep/dong" noise because it wont let you dictate any more of anything said.
I Couldnt find the entry where google shows someone with what looks like same issue/bug/defect/feature # 2, so entering this.
I Have warranty but cant figure out how to get phone support for iphone (only mac ...last year).
I don't seem to have this problem using i notepad in phone when he gets to having to wrap. :-)
I Have not trieddictation on my mac...yet.
CAn someone help on these issues please? Thanks!

Hey Markwoody,
Wow! That definitely sounds frustrating, but good job so far isolating and troubleshooting the issue. We have a few more steps that we can try in an attempt to resolve this issue:
First, it sounds like you have tried restarting your phone. Let’s try a reset instead:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-us/ht201559
How to reset
- You should reset your device as a last resort and only if you can't restart it.
- To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
If the issue persists, we’ll want to restore your device to factory settings and test once more. You can backup your device, but be sure to restore it as new first for isolation purposes, as restoring a backup can sometimes restore the same issues that you were experiencing before.
Use iTunes to restore your iOS device to factory settings - Apple Support
http://support.apple.com/en-us/HT201252
Thanks,
Matt M.

Sound broken after 10.10.3 upgrade

Similar Messages

Maybe you are looking for