Sound bugs gta

hey all,
I have some sounds bugs in the game grand theft auto san andreas
Things like; After it rains, or entering a building = loss of all ambient sound, or all sound Entering a car = hear nothing but the radio No sound in cut scenes.
i have a sound blaster li've! card is there any drivers or updates for those bugs..
cya all

Has anyone had this problem... sometimes after saving game i get what i can only explain as a sound effect stuck in a loop, when i run away from the house and the sound does change to the rear speakers, but after running for a while it goes away, ... has happend randomly during games aswell.
also occures when alt-tab is done... (running the game clean) - no trainers or cheats running since install..
i think i remember the same or similar sound after installing creatives 64bit drivers for sound, then it blue screened and rebooted..
Also have graphics problem displays what looks like the player skin over the screen with game in background.
heres the setup...
Windows XP Pro SP2 (32bit ed)
amd athlon 64bit 3000+
msi K8N-Neo2 Platinum
GB Corsair TwinX Ram (running dual channel)
Sound Blaster Audigy 2 ZS Platinum Pro
Creative GigaWorks S750 7. THX Speakers
7x 250GB SATA
PC&P 50 PSU
Geforce 6800GT 256MB DDR3
DVD DL writer (if that really needs to be listed)
san andreas sound problem audigy 2, run away from it and it goes away

Similar Messages

SBLive 5.2 Sound Bugs; GTA San Andr

I?ve been hearing about all these sound problems for SB Li've 5. on GTA San Andreas.
Things like;
After it rains, or entering a building = loss of all ambient sound, or all sound
Entering a car = hear nothing but the radio
No sound in cut scenes.
Solutions?
. There has been some success converting to quadraphonic. This is done via special non-Li've drivers like kXproject ones, or (try this first) just resetting windows sound settings to quadraphonic.
2. Also in one case an individual used the most recent windows 98 drivers and the bugs disappeared. Very confusing
3. Running dxdiag.exe, and pushing sound acceleration down notch by notch until it works, has had some success.
4. Also reinstalling the drivers is always a good thing.
I?d like to get some official Creative feedback on this issue if possible.

I've had the same kind of problems with my older Audigy soundcard...And honestly, the lack of response to this from either Rockstar or Creative is annoying me! I've tried using different drivers, which helped for a short while, but then my crackling and popping was right back where I didn't want it!
I'm currently unable to play the ****ed game in a satisfactory matter, if I leave the hardware acceleration on, the sound just starts popping, which also makes the game freeze for seconds at a time...A framerate of 0. frames per second is no fun at all! When I turn down the hardware acceleration, all I have left is the sound of the car radio, all speech and car sounds (the whole atmosphere of the game) are gone!
Things I've tried thusfar :
- Using SBLi've/Audigy drivers
- Installing the original drivers
- Replacing the eax.dll file with an older version (this actually helped for a bit, but apparently today the problems have returned)
- Changing/checking my speaker settings (both in the creative control panel and through windows)
- Using my onboard soundcard gave the same problems, so it might not even be a creative problem...As I'm sure they're happy to read!
This is annoying the hell out of me, I must have spent hours looking for a good fix for this problem, and all I'm finding in answers is to upgrade my soundcard, but noone is saying that that actually works! The most problems come from using older Audigy cards, but that's just wack. What ever happened to backwards compatibility? Has that been pushed out the door for the sake of profits?
I would like to hear the right solution, or a patch from either Rockstar or Creative, but I'm not holding my breath until this happens... The strange thing is that these problems only occur in GTA games, I haven't had a single sound problem in any other game!Message Edited by Binsky on 06-25-2005 0:04 PM

Sound bug CS5.5 & AIR 2.7.1 with small testcase!

Hallo,
this is a serious bug in AIR 2.7.1. As posted in another threat (I opened a new one because of the importance and the testcase) with AIR 2.7.1 suddenly the sound handling of sounds embeded in nested movieclips in the timeline run wild.
This is the old threat:
http://forums.adobe.com/thread/891766?tstart=0
I coded a small testcase.
Please download the FLA from our server:
http://apps.oetingerverlag.de/Soundbug_AIR_2.7.1.fla.zip
You'll find a scene with a book cover and one button.
If you push the button, an event is dispatched and a movieclip (the pig) is started and the pig makes some piggish noises.
In the background there is a small animation running, the beaver dips his foot into the water.
CASE 1, AIR 2.7:
If you compile this with Flash Pro CS5.5 and AIR 2.7 (overlayed over 2.6, as described by Adobe http://kb2.adobe.com/cps/908/cpsid_90810.html ) all is well:
If you don't push the button the pig won't move and won't make a sound.
If you push the button the pig is animated and makes a noise, after this the pig is silent again.
CASE 2, AIR 2.7.1:
If you compile it with AIR 2.7.1 overlayed, after a few seconds the pig noises start, even if you don't click the button!
And with every loop of the main animation another instance of the pig noise is started, just wait, sounds kind of funny (well, it would be funny if it wouldn't be such a big problem for us now - we couldn't deploy our three Android-apps, because in the Android Market there is only AIR 2.7.1 as runtime).
So: There is a big problem, and I think some more developers will be affected by it.
Any suggestions?
We could of course delete all sounds on timelines and start the sounds via actionscript 3, but we have three projekts and lots of sounds...

Implemented a workaround:
Case:
a) There is a main MovieClip with the background.
b) in this main MovieClip another MovieClip is placed, with an animated pig and some piggish noise audio
The bug manifests itself, if you use a normal timeline sound configuration like this (this is part of the nested mc with the animated pig):
In frame 2 the sound on the timeline starts. With AIR 2.7.1 this leads to weird sound bugs, the sounds on the timeline are all started, the stop()-comand in the top layer is ignored (but only for the sound, the animation does not run automatically. This is really strange!).
Workaround:
a) load the pig sound via actionscript in the main MovieClip:
var scene2SoundPig:Scene2SoundPig = new Scene2SoundPig();
Call the sound directly from the timeline, at the same position:
The code for this (in the blue marked rectangle) is:
MovieClip(parent).scene2SoundPig.play();
Now it all works as usual (like it does in 2.7).
One thing to look out for:
The sound in the timeline plays as long as there are frames, this could be e.g. 5 seconds.
The workaround plays your COMPLETE sound, e.g. 10 seconds.
So if your sound is somewhat longer than the portion you played via the timeline, you have to shorten the sound with e.g. SoundBooth.

Why my iPhone 4s sound bug become serious after i had updated to IOS 8 ?

Why my iPhone4S “sound bug" become very serious after I had upated to IOS 8?

The same reason why you can't use it under iOS5. It's exclusive to devices since the iPhone 4S.
(for selling new products)
So iPhone 4S, iPad 3, iPhone 5 and iPod Touch 5.
Thinking about other features, you may be interested in 3D-Maps, but there for, you need an A5 CPU or better.
So iPad2, iPhone 4S, iPad 3, iPhone 5 and iPod Touch 5.

IOS 6.1 still sound bug

Dear comm, AND DEAR APPLE SUPPORT!
It is really annoying!
Today I have updated my iPad2-16GB-3G to iOS 6.1 and that bloody sound bug is still there.
[Shortly the sound works and randomly after a short period of time it chrashes. No hardware key and no soft key works anymore. The soft key is gone.
I saw several chats regarding the different iPhone / iPad versions dealing with the same prob.]
I would appreaciate an opportunity to put more pressure on Apple to solve these problems. These wonderful gadgets like iPhone and iPad are that expensive!
And one of the key functions does not work. A bug that is not fixed since month, now!
and double it!
To all persons concerend: Stand up and put pressure on the Apple support to solve that problem!
THX and sorry for venting my anger!
joapp

First, Apple Support is NOT reading these forums. These are user to user technical help forums hosted by Apple. There are only other users here.
You may have a hardware problem. Visit an Apple store for evaluation or contact Apple support.
There is a chance that you have a bad Application on your iPad which is crashing the sound driver but, fron your description, this seem unlikely, however, give that possibility some consideration.
Note: the majority of sound problems reported here are caused by the user having mute turned on and not realizing it. You don't seem to have that from your symptoms.

AIR 3.7.0.166 Sound Bug Crash APP without error

Hello guys,
The last Adobe Air Mobile update gaves me a lot of head ake!
Im developing a multimidia APP, and since AIR was updated in my device, no more sounds is playing in the application.
It just crashes withou any error in Debug mode, and restarts. When i call Sound.play media function in any ocasion, it happens.
It seams that there is a REALLY BIG CONFLICT with the new AIR and Sound.play.
My references:
Im developing in Flash Builder 4.6, running Adobe AIR 3.7.0.166
on a Motorola Atrix MB860
with Android 2.2.2
To reproduce the bug just install any AIR APP with music controls, like this: http://coenraets.org/blog/air-for-android-samples/voice-notes-for-android/
APK: http://coenraets.org/android/VoiceNotes/VoiceNotes.apk   with the 3.7.0.166 version of AIR, and try to reproduce the sound.
That application was running ok until the update. There is an textflow bug too, witch import only underline <u> and link <a> tag (no more bold <b> and italic <i>) from HTML, but compared to the sound crash this is nothing.
I insist that all this was running OK since the last update (i even run an backup version cause i think i was making any script error).
I´m looking hopelessly the LAST version before that last one so i can continue developing my application. With this error i canot do anything!!!!
If someone can help me where i can find it, id appreciate a lot!
Thanks

05-29 19:59:00.896: I/DEBUG(3857): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
05-29 19:59:00.896: I/DEBUG(3857): Build fingerprint: 'sprd/sprdroid_base/hsdroid:2.3.5/MocorDroid2.3.5/W12.20_P-17_20130107.155157:eng/test-ke ys'
05-29 19:59:00.896: I/DEBUG(3857): pid: 4130, tid: 4154 >>> air.com.baijie.learnhanzi <<<
05-29 19:59:00.896: I/DEBUG(3857): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 00000000
05-29 19:59:00.896: I/DEBUG(3857): r0 00000000 r1 afd46608 r2 00000000 r3 00000001
05-29 19:59:00.896: I/DEBUG(3857): r4 83195a94 r5 00006d00 r6 00000000 r7 00000017
05-29 19:59:00.896: I/DEBUG(3857): r8 2f8df18f r9 00003120 10 00323dd0 fp 00008ae0
05-29 19:59:00.896: I/DEBUG(3857): ip 00000000 sp 49995cc8 lr afd10e74 pc 8214b238 cpsr 60800030
05-29 19:59:00.896: I/DEBUG(3857): d0 454545656372756f d1 2e2e2e276a634b50
05-29 19:59:00.896: I/DEBUG(3857): d2 203334312020203a d3 6c20746f6e6e6163
05-29 19:59:00.896: I/DEBUG(3857): d4 5f2720657461636f d5 6f72646e61374e5a
05-29 19:59:00.896: I/DEBUG(3857): d6 6f43584d4f386469 d7 6165724336636564
05-29 19:59:00.896: I/DEBUG(3857): d8 0000000000000000 d9 3ff0000000000000
05-29 19:59:00.896: I/DEBUG(3857): d10 0000000000000000 d11 0000000000000000
05-29 19:59:00.896: I/DEBUG(3857): d12 0000000000000000 d13 0000000000000000
05-29 19:59:00.896: I/DEBUG(3857): d14 0000000000000000 d15 0000000000000000
05-29 19:59:00.896: I/DEBUG(3857): d16 5f534e4b52456574 d17 345f534e49707332
05-29 19:59:00.906: I/DEBUG(3857): d18 52454545584d4f49 d19 534e495f31534e4b
05-29 19:59:00.906: I/DEBUG(3857): d20 61446174654d385f d21 4b52624545456174
05-29 19:59:00.906: I/DEBUG(3857): d22 5f534e495f31534e d23 53616964654d3131
05-29 19:59:00.906: I/DEBUG(3857): d24 0000000000000000 d25 0000000000000000
05-29 19:59:00.906: I/DEBUG(3857): d26 0000000000000000 d27 0000000000000000
05-29 19:59:00.906: I/DEBUG(3857): d28 0000000000000000 d29 0000000000000000
05-29 19:59:00.906: I/DEBUG(3857): d30 0000000000000000 d31 0000000000000000
05-29 19:59:00.906: I/DEBUG(3857): scr 60000013
05-29 19:59:01.026: I/DEBUG(3857):          #00 pc 0014b238 /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.046: I/DEBUG(3857):          #01 lr afd10e74 /system/lib/libc.so
05-29 19:59:01.046: I/DEBUG(3857): code around pc:
05-29 19:59:01.056: I/DEBUG(3857): 8214b218 4810bd10 68004478 490fe7fa 68094479
05-29 19:59:01.056: I/DEBUG(3857): 8214b228 b1604788 23014a0d 447a7023 47906812
05-29 19:59:01.056: I/DEBUG(3857): 8214b238 6b4b6801 4a0a4798 6010447a 4809e7e8
05-29 19:59:01.056: I/DEBUG(3857): 8214b248 68004478 bf00e7e4 0102ef30 0104a884
05-29 19:59:01.056: I/DEBUG(3857): 8214b258 0104a880 0104a878 01023cc8 01028ece
05-29 19:59:01.056: I/DEBUG(3857): code around lr:
05-29 19:59:01.056: I/DEBUG(3857): afd10e54 02800016 08bd87f0 e5964000 e5967000
05-29 19:59:01.056: I/DEBUG(3857): afd10e64 e2144903 1a00000e e5965000 ebffee45
05-29 19:59:01.056: I/DEBUG(3857): afd10e74 e2055a02 e3853001 e1500003 0a000006
05-29 19:59:01.056: I/DEBUG(3857): afd10e84 e5865000 e1a00006 e1a01005 e3a02001
05-29 19:59:01.056: I/DEBUG(3857): afd10e94 ebfffea8 e1a00004 e8bd87f0 e3a00000
05-29 19:59:01.056: I/DEBUG(3857): stack:
05-29 19:59:01.056: I/DEBUG(3857):     49995c88 00000000
05-29 19:59:01.056: I/DEBUG(3857):     49995c8c 826efaaf /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.056: I/DEBUG(3857):     49995c90 00000000
05-29 19:59:01.056: I/DEBUG(3857):     49995c94 8276c953 /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.056: I/DEBUG(3857):     49995c98 00000000
05-29 19:59:01.056: I/DEBUG(3857):     49995c9c 82145e97 /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.056: I/DEBUG(3857):     49995ca0 8316e000
05-29 19:59:01.056: I/DEBUG(3857):     49995ca4 831a5e28
05-29 19:59:01.056: I/DEBUG(3857):     49995ca8 0000000a
05-29 19:59:01.056: I/DEBUG(3857):     49995cac 821d0869 /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.056: I/DEBUG(3857):     49995cb0 83195a94
05-29 19:59:01.056: I/DEBUG(3857):     49995cb4 00006d00
05-29 19:59:01.056: I/DEBUG(3857):     49995cb8 00000000
05-29 19:59:01.056: I/DEBUG(3857):     49995cbc 00000017
05-29 19:59:01.056: I/DEBUG(3857):     49995cc0 df002777
05-29 19:59:01.056: I/DEBUG(3857):     49995cc4 e3a070ad
05-29 19:59:01.056: I/DEBUG(3857): #00 49995cc8 00001000
05-29 19:59:01.056: I/DEBUG(3857):     49995ccc 821d5cdd /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.056: I/DEBUG(3857):     49995cd0 00000000
05-29 19:59:01.056: I/DEBUG(3857):     49995cd4 8316e000
05-29 19:59:01.056: I/DEBUG(3857):     49995cd8 00323dd0
05-29 19:59:01.056: I/DEBUG(3857):     49995cdc 002b6b98
05-29 19:59:01.056: I/DEBUG(3857):     49995ce0 82ded2d4 /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.056: I/DEBUG(3857):     49995ce4 82ded320 /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.056: I/DEBUG(3857):     49995ce8 00325ba0
05-29 19:59:01.056: I/DEBUG(3857):     49995cec 00009b98 /system/bin/app_process
05-29 19:59:01.056: I/DEBUG(3857):     49995cf0 00008124 /system/bin/app_process
05-29 19:59:01.056: I/DEBUG(3857):     49995cf4 00001074
05-29 19:59:01.056: I/DEBUG(3857):     49995cf8 4278f500
05-29 19:59:01.056: I/DEBUG(3857):     49995cfc 00000000
05-29 19:59:01.056: I/DEBUG(3857):     49995d00 00000000
05-29 19:59:01.056: I/DEBUG(3857):     49995d04 00000000
05-29 19:59:01.056: I/DEBUG(3857):     49995d08 00000000
05-29 19:59:01.056: I/DEBUG(3857):     49995d0c 3ff00000
SC8810, Android 2.3.5

GB will not open due to new sounds bug - no answers

Error message - "New Post - GarageBand was not able to install new sounds. Close and re-open GarageBand to download and install them again".
Saw one thread on this and there was no resolution at the end of it. Seemed like multiple people are suffering the same issue. This bug makes Garageband not work at all. I have no way to record! Has anyone spoken to apple? Called applecare? Come up with a definitive fix? I'm so frustrated right now. Early 2008 iMac with newly installed Yosemite and most recent version of garageband. Please help me.

obviously the "new post" was not part of the error message - just copied and pasted potential header.

Sound bug on this mp3 file

i am using a very simple mp3 player,
today i find few mp3 doesn't work, bugged mp3 only play 3 seconds, then stop. Other mp3 work fine
i try to use realplayer, windows media player to play that mp3, all work fine.
i attached the mp3 file
here is my actionscript
private function init(e:Event = null):void
   removeEventListener(Event.ADDED_TO_STAGE, init);
   var musicurl:String = root.loaderInfo.parameters.musicurl;
   var musicvolume:String = root.loaderInfo.parameters.musicvolume;
   var buffer:String = root.loaderInfo.parameters.buffertime;
   var buffertime:Number = (buffer == null) ? 3000 : parseInt(buffer);
   if (buffertime <= 100)
    buffertime = 3000;
   var text:TextField = createTextField(80, 10, 300, 50);
   var format1:TextFormat = new TextFormat();
   format1.bold = true;
   format1.size = 18;
   musicurl = "cd11827050ea9f027adb68c807828104.mp3";
   if (musicurl != null)
    var soundObject:Sound = new Sound();
    var req:URLRequest = new URLRequest(musicurl);
    var context:SoundLoaderContext = new SoundLoaderContext(buffertime, false);
    soundObject.load(req, context);
    var channel:SoundChannel = soundObject.play(0);
    //var channel:SoundChannel = soundObject.play(10000); // start the mp3 at 10 seconds, it work
    if(musicvolume != null && channel != null)
     var transform:SoundTransform = channel.soundTransform;
     transform.volume = parseFloat(musicvolume);
     channel.soundTransform = transform;
    text.text = "loaded";
   } else {
    text.text = "fail";
   text.textColor = 0xFF0000;
   text.setTextFormat(format1);

thx for reply
but without resave/modify the file, can do some coding in AS3 to let it work?
because the server have many sound (around 20000), it is impossible to find out which files have problem

Default Alarm Sound Bug iPod Touch

I have a problem with my iPod Touch. When I set an alarm with a sound OTHER than Time Passing it defaults back to Time Passing when it actually goes off. I tried many times to change the sound. The only way I fixed this was to do a complete reset (I don't want to have to keep doing that!). After this I can choose any sound (from those available) and it works as expected. I will try again after a sync and see if this issue still exists.
Is this a known bug? The forum search shows too many unrelated results for me.

This is a known bug, posted many, many times throughout these boards, on both iPhone and iPod touch.
Report the bug here: http://www.apple.com/feedback/ipodtouch.html
Thanks,
R-Fly

Sudden volume control/sound bug!

I began experiencing this bug tonight and I'm not sure if it is a virus?
I was watching a video on youtube and suddenly noticed that my volume was cutting in and out. After closing firefox, I could hear the volume popping in and out and noticed that the volume icon in the toolbar was going from medium to high and back. When I try to use the volume control slider, it goes from being whited out (can't move it) and back to normal, and when I try to use the volume keys, I get a circle and slash to show that I cannot manipulate the sound.
I took screenshots of this in case I needed to show someone.
It does this randomly. Sometimes it's normal, sometimes it's "stuck" and I can't get any sound, and then randomly it will pop in and out again and again. This has never happened before.
I am using a 17" macbook pro (silver keys, not the newest one). The keys on the keyboard are not stuck, they function properly and like normal.
I have tried:
verify & repair permissions in disk utility
run scripts
run onyx and cocktail
cleared all caches
installed newest version of osx
restarted and shut down countless times
cleaned keyboard just in case
If anyone has heard of this or has any suggestions PLEASE let me know. I baby this computer and I'm at my wits end!

If and only If it's a Logic Board problem, the time between symptoms appearing to failure of hardware can vary.
NOTE: I thought only this might be the problem because I've seen it happen a number of times, particularly in notebooks (because the hardware can become damaged more easily)
I can provide no definite time-frame. but, I would suggest having the machine checked by an Apple service technician, or center; as always its better to be safe than sorry.
Logic board (i.e motherboard) failures basically mean the core hardware dies, everything else, drives, RAM etc should remain unharmed. You may lose some core settings, date/time etc...
Hope this is useful and good luck!
Kind Regards,
Peter.

M7470n BIOS sound bug

The sp26713.exe BIOS update for my (M7470n ER883AA-ABA) system causes loss of on-board sound which seems to be a major flaw.
After asking where to report possible bugs I was told "Post specifically to the audio section of the type of system you own. Specify by the complete product name/number." so I hope I'm posting in the right place.

In addition to all this battery depletion is a bit more than my iPhone 4. I hope apple fixes all these issues soon.

Critical Surround Sound bug in Logic 8

Unlike many of you I purchased Logic 8 to do surround sound mixing. I liked the fact that it included Sound track Pro. I quickly realized after purchasing it that soundtrack pro had its limitations with regard to doing full audio post for film projects that i am accustomed to doing here in Los Angeles. I turned to Logic as an alternative only to find out that the surround panner is inadequate and somewhat limited when trying to automate it. The issue is that when trying to do a 360 degree pan counter clockwise the node reverses itself clockwise once you cross the 180 degree position in the plane or center of the rear speakers and then continues its counter clockwise 360 degree path. This causes a noticeable stutter in the audio as there is a 1 to 2 millisecond delay that occurs. This also occurs when moving the node from left to right across the rear speakers. I have posted this message to bring attention to this issue in hopes of getting this resolved quickly. I have used many surround sound programs and this is the first time that i have ever encountered this type of problem.

DJWillis wrote:
Since this morphed a little into a Logic vs PT threads as for benefits and drawback, one question always occurs to me when I see any post on surround sound: do you know ANYONE who has a surround sound system in their home who is just a regular consumer, and not a pro audio person testing a mix?
I don't. Surround sound is only for theatrical releases, and it's just small component of seeing a film. No one goes or doesn't go to a movie because it does or doesn't have dolby blah blah surround up the wazoo! Who cares? No one. They just want to see a good movie.
I'm always amazed that this marketing gimmick has had any impact. I mix music in stereo. Period. When I edit movies I edit in stereo. Period. No one has ever asked for surround for delivery. But then again, I won't work for the studios.
Surround sound is like 3-D movies -- pretty silly and extraneous to the entertainment experience. (I just saw "Coraline" last night -- my date and I were underwhelmed. It was nice -- but nothing earth-shattering, and hardly worth the whole 3-D effort.)
Sorry to rant, but it's all just so silly. Going from mono to stereo was awesome I'm sure in its day. Same for going from black & white to color and silent to sound. And from VHS to DVD.
But from stereo to surround? Pass. I'm not stringing up a bunch of speakers around the living room because my life is so boring I need to hear sounds behind me when I'm watching a movie!
Hi DJ,
My next door neighbor has a 7.1 system, and has a few audio-only titles. He wishes there were more.
My uncle, a general contractor, also has a 5.1 system in his home, and mostly watches movies with it. He does have an Eagles concert DVD in surround, and likes it a lot.
When I went to Circuit City, which is going out of business, I asked the pro sound guy what was flying off the shelves, and he stated two things : cameras, and surround theater systems.
As to your statement in red, you should probably become a member of either the NARAS, or the AES, they have both conducted research, with doctors both of physics and medicine, about what is more important, both consciously, and sub-consciously, to a human observer, when viewing a moving picture, both with and without sound.
Both guilds agreed that the sound was more important in judging the realism, and therefore what was believed, than any picture without sound, or an picture with poor sound. The determining factor for when an observer was more involved in the experience always ended up being related to the sound, and it's quality, or lack thereof.
And this research was done a while ago. A nice Canadian fellow has been conducting research on this since 1969 :
http://www.psych.mcgill.ca/labs/auditory/laboratory.html
And his book :
http://www.psych.mcgill.ca/labs/auditory/book.html
Let me know if it's too deep for ya... I'll try to find something a little less technical.
Cheers

IOS 7.0.4 sound bug

Help please
No vibration or sound except ringtone in settings
Sound works when headset plugged in
Tried rebooting to resetting

Hi EliteAces!
Here is an article that will help you troubleshoot this issue with your iPhone:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Does anyone have an issue with the sound bug?

The volume won't work there is no sound nor is there a icon when I increase or decrease the sound sometimes it works sometimes it doesn't.

This seems to be a generic problem not only with InDesign but with many of the Creative Suite/Creative Cloud apps, namely the ones with large pasteboards surrounding the working area. I would very much like Adobe to implement a preference opportunity to disable Magic Mouse finger scrolling locally in these apps. IMHO, moving the pasteboard around is best done with space+click.
It would be great if there were some kind of product enhancement tip link on Adobe's website, but I haven't found any.

Major sound bug with 2.1 and some apps on 2.1 tested on iphone 3g and touch

I have noticed that when playing Toy Bots on 2.1 both iphone 3g and touch there is horrible screaching in some sounds. When you use the lightning bolt to swing the sound is terrible and will kill your ears even at a low volume. I also discovered asphault has the same problem when you are racing and go off the road etc. Didnt happen before 2.1

I am also having the same problem. Seems that all the sounds associated with user-initiated actions are insanely loud and overdriven, whereas the music in the background is at normal volume. Same things apply to the free app Cube Runner, and this is def. a result of the upgrade to 2.1. I have tried restarting the phone, the computer, etc, even removing and reinstalling Cube Runner to no avail. At least I know I'm not the only one having this issue, but aside from the fact that it had my 6 yaer-old bawling his eyes out, it's a real drag!

Sound bugs gta

Similar Messages

Maybe you are looking for