Sound buzzing and screen crush

just got a Pavilion p6203uk for christmas. after its been running for about 30 mins it makes a buzz sound through the speakers and the com goes really slow for like 2 seconds at a time. this keeps happening for like 2-5mins then it stops. then the same thing happens about every 15 mins after. when i turn sound off the buzz noise stops but the computer still goes slow for the time. any suggestions?

Hello @izzy12,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues where your HP Pavilion p6203uk Desktop PC starts to lag and makes a buzzing sound. I would be happy to assist you, but first I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this I can provide you with accurate information.
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

Default Sound Balance and Screen Brightness?

Recently my iBook G4 has been booting up with the screen brightness all the way down and the speaker balance all the way to the left. Did these settings somehow get set as the defaults? How do I change it back to normal so that I dont have to keep changing the settings every time I boot up?

There has been a bug in OSX in regards to sound balance for notebooks since 10.3.5 (IIRC). To fix it look for a free app called Balanced, that should correct the problem.
As for the screen brightness, I've never heard or seen anything like that.

Configuration of sound hardware and screen

Hello
I had to format the hard and I lost the drivers CD.
I have downloaded the audio drivers from http://www-307.ibm.com/pc/support/site.wss/MIGR-61506.html and installed it.
However, the sound hardwars does not seem to work.
The same happned when I tried to install drivers for Wireless hardware. (wireless connection only worked after I used Fujitsu Siemens drivers!!)
Any help?

did you install the drivers or simply unpack it? You have to install the drivers from your drivers folder under c:\ drive.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Hi my iPhone 4 won't turn on . When plugged in on several different chargers the following happens . Blank screen then apple sign for a short period then it buzzes and goes blank. When connected to mac get message that phone is in recovery mode and that

Hi my iPhone 4 won't turn on . When plugged in on several different chargers the following happens . Blank screen then apple sign for a short period then it buzzes and goes blank. Have tried power button and home button but no change ,When connected to mac get message that phone is in recovery mode and that i must restore this phone before it can be used with iTunes . Is this my last resort as I have some photoessays I don't want to loose.
PPlease help

Hello, Chantal105
Thank you for visiting Apple Support Communities.
If your device is in recovery mode you will need to restore the device.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Jason H.

When i plugged my ipod into the computer it started to make buzzing and screeching noises. It became hot so i removed it and then the screen froze while it continued to make these noises. I have never had anything like this happen.

When i plugged my ipod into the computer it started to make buzzing and screeching noises. It became hot so i removed it and then the screen froze while it continued to make these noises. I have never had anything like this happen. (never gotten it wet or had it exposed to extreme temperatures) It is also unresponsive to any buttons on the ipod and it didn't show up when i plugged it into my computer. What do I do? Also if it is unfixable could i get a free one from apple?

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

My phone 4 some time music player sound coming and volume up and down not show screen .then some time sound coming.. why

my phone 4 some time music player sound coming and volume up and down not show screen .then some time sound coming.. why

Hello @voicewizard,
I understand that you are having audio issues with your audio having to ramp up before it hits the normal output range. I would be happy to assist you, but first I would encourage you to post your product number for your computer as there are numerous HP ENVY 810 All-In-One Desktop PC variations. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I just tried to install the new IOS version and now my screen is all black.. since an hour. My power button is broken so i cant reset my phone. When i plugg it in my computer, it makes a sound, but the screen stays black. MAY YOU HELP ME PLEASE???

I just tried to install the new IOS version and now my screen is all black.. since an hour. My power button is broken so i cant reset my phone. When i plugg it in my computer, it makes a sound, but the screen stays black.
WHAT TO DO

carter87 wrote:
so i bought this Iphone 4 thats jail broken,
Return it.
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
Security vulnerabilities: Jailbreaking your device eliminates security layers designed to protect your personal information and your iOS device. With this security removed from your iOS device, hackers may steal your personal information, damage your device, attack your network, or introduce malware, spyware or viruses.
Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
... It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.

Xfce4: Problems with Sound and Screen Locking on ASUS G53S

Hello everyone,
I recently installed Arch for the first time, and decided to use xfce4 for my desktop environment. Everything seems to work well after I followed the instructions given in the wiki, except for the sound and screen-locking functionality. Regarding the sound, I made sure that my user account is added to the audio group, and installed the gstreamer1.0-base-plugins and gstreamer1.0-good-plugins packages. The xfce4-mixer applet starts up without any warnings and recognizes the available devices, but I am still not able to hear any sound. The "Lock Screen" applet simply does nothing upon being clicked. Do you have any ideas as to what I should try in order to fix these problems?
Thank you very much!

To be able to lock the screen you have to install and configure a screen locker or screen saver, e.g. xscreensaver, slock, i3lock, maybe combined with xautolock. When you use a screen locker and not xscreensaver, XFCE might not recognize it. Then create a symlink in /usr/local/bin/xflock4 or use a shellscript if you need to pass parameters.
My configuration: xautolock with i3lock. /usr/local/bin/xflock4 is this executable shellscript:
#!/bin/sh
xautolock -locknow
xautolock is started in the XFCE autostart with this commandline: xautolock -locker 'i3lock -d -i ~/Bilder/arch/arch-linux-lock.png'
PS: If you like i3lock and need user switching capabilities, I can give you a patch where Ctrl-S calls a custom command (gdmflexiserver by default)
Last edited by progandy (2012-06-17 14:19:12)

Alarm sound and screen freeze

I have a 13 inch MacBook pro running OSx lion, after around 2 hours intermittent alarm sounds and screen freezes with coloured checks, reboots ok but reoccurs, it has a ssd drive any suggestions?

I just had this happen. I just installed new memory. Did you install any new hardware.

Buzzing and Echo Sound After Recording

Hello,
I am hearing a buzzing and echo sound in the background after I record a project on Captivate 4. I am using a USB DYNEX Microphone that is connected to the Laptop. Adjusted the Volumne in Captivate but does not elemintate the background noise. Any suggestions???
Thanks

Have you looked for environmental noises, both electrical and audible?
Here are some possible culprits for induced electrical "buzz" or "hum." These "noises" are actually created by electrical interference in the recording equipment, and don't become apparent until playback:
Fluorescent strip lighting.
AC power cords near the microphone cable.
Mic cable near CRT displays.
Other electronic devices where you are recording.
If you're using a laptop, I find I have better luck running on battery power when recording, though I'm not clear if this is because of the power source, or because power-save features kick in that make the machine quieter.
Another possibility is real audio noise that you mentally tune out when you're in the room, but hear when you listen to playback. Some ones I've run into:
Ventilation noise. Particularly if you're recording in a building where you work all the time, you don't hear the ventilation system unless you really stop to listen for it.
Small electronic devices -- fans, projectors, etc. that might be in the room.
Also, play around with microphone position relative to your mouth; it's possible that the source of the racket is your own breath!!
Good luck!!

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through itunes, but the sound is still absent, and still problem with sound an

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.

Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Hard drive and screen failures

Hello all, thank you for any help! I have to do this on my phone, apologies for any errors!
I have an early 2011 macbook pro, purchased in the fall of 2011.
Last repair:
I had 3 year apple care, and had last taken it for repairs september 2014, for first not ejecting discs from optical drive, then losing touchpad sensory control, then starting to sometimes not booting and/or black screen. When I got it back they had replaced the logic board, hard drive, and screen and connections there were a few screws not flush on the base, and they said that was fine, and it needed to be like that for the touchpad to work.
Today, this morning, it was fine. I left it at 9 am, came back at noon and the screen was black, and only the least of fan sounds
I have
MBPro early 2011 OSX 10.7.4 Lion
Use surge protector 95% of the time (except rarely when out at a cafe)
'Symptoms':
Black screen
No boot sound on start up
No sounds of hard drive or disc/DVD drive
No indicator light bar at the front right corner
Sound of fans running on low
Light from charger indicator is green (full)
I tried:
https://support.apple.com/en-us/HT201295
A)Shift-control-option-power a handful of times, no change
B)Disconnected power cord, waited, reconnected
Combinations of these (power off, then A, B, power on; on, A, B, on; B, A, on; etc)
D) I tried command-R, no boot, no change
Results: only when I use method A, then the optical drive clicks/buzzes. Otherwise no change for any other attempts I listed ^. If I shut down and restart with the power button then as before, no sounds except low level fan sound.
I am quite disappointed, one reason I've enjoyed Apple products is in being able to use them for 5-10 years :/

Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

Envy sleekbook speaker rattling and screen brightness won't go down

Hello! I have an hp envy that when I play any music on there is a rattling sound coming from the top left speaker. The sound stops when I press mute. I restarted the computer and tried to play a song file and it seemed fine until I started another program (windows movie maker) and the sound again started to rattle. It has not done this in months. I bought the computer in October 2014 and I remember hearing that rattling sound briefly, but then it stopped and I never noticed it again.
Also, just in the past day I noticed that my screen was super bright and in an effort to save energy I hit the key on the the keyboard and nothing happened. I went to settings and scrolled the brightness down but the screen did not change.

Holly_J wrote:
Here are some troubleshooting steps to try for the screen brightness: http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00832191
As for the speaker, you may want to try reinstalling the wireless driver: http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/Buzzing-and-Crackling-Sound-w-HP-ENVY-Sleek...
Let me know if that helps!
I've checked out the link and tried a few of those options however my screen brightness will not change. The slider in the options says that it is all the way down but the screen does not change. And when I press the keys on the keyboard for brightness nothing pops up on the screen saying that it is going up or down. This is just strange. It doesn't adjust when I unplug the power adapter either.

My Macbook air laptop sound, fan and speed is messed up, how do I fix it?

Where do I start. One random day I came home to find out that my sound has been muted. I tried to fix it with headphones, reseting the PRAM, google, and even by asking my schools computer tech. Some times the mute button would disappear and the sound bar would be in color but their would still be no sound. After the computer tech went on his account on the laptop to un-mute it, which he couldnt, he told me that my built in speakers dont work and would need to be replaced next year. Im like okay no problem, that same day i closed my laptop and found that the light was still on, I asked a friend and he said the black bar between the keypad and screen is what activates the laptop to shut off, which means its broken, so in between class periods i either shut down my laptop or put it to sleep. The next day my laptop starts to run slow and as soon as i power it on the fan runs immediately but the laptop isnt hot. My mouse moves at normal speed but my applications are running slow. This all happened in one week which is this week. My battery dies at a normal pace though.
More information
This is a school given macbook air for a magnet program called iPrep, so i cant download anything with our administration password
This is my second laptop out of the 3 years ive been in the program. My first laptop started to break after the sound got muted and my laptop ended up with an X on the battery and would only turn on when a charger is plug but would go super slow. This makes me scared cause i dont want that happening at all to this one.
Problems
Sound is muted, it sometimes un-mutes but there is still no sound, internal speakers broken
When closed the screen display is still open
Computer applications go slow, fan turns on immediately
Any help, this is bothering me so much

Hi Jollified,
Does your sound work when you try to use head/earphones? If so, try the following:
Plug your Headphones into your Mac.
Play a sound through them (a song for example), then stop the sound.
Make sure 'Preferences' is isn't open. If it is, Quit.
Launch System Preferences > Sounds.
While the Sounds tab is open and set to 'Headphones', pull out the Headphones from the jack.
You should see your Mac reset to 'Internal Speakers'
Also, I see you have tried resetting the PRAM, have you tried resetting the System Management Controller (SMC)? Resetting the System Management Controller (SMC) on your Mac - Apple Support
As for your MacBook not sleeping when you close the lid, there are many reasons this can occur.
First of all, check out Apples article on the issue: OS X Yosemite: If your Mac won’t go to or stay in sleep If you find these steps don't help, try a few of the following:
A common cause for the Mac not sleeping is your printer. If there are queued jobs waiting to be printed, but your printer is switched off, for some reason you Mac just wont like it and simply will not go to sleep. System Preferences > Print and Scan > Open Print Queue
Do you have an Ethernet Cable connected? People have reported in the past that removing their Ethernet allowed their Mac to sleep. This goes for other things you may have connected directly to your Mac also.
Try heading into your Mac Preferences > Sharing and deselecting 'Internet Sharing' as well as 'Printer Sharing'.
Also deselect Wake For Network Access by heading to System Preferences > Energy Saver > Power Adapter > Wake For Network Access.
Energy Saver > Schedule > Startup or Wake - Uncheck.
Alternatively, set your system preferences to Never Sleep, and put into Sleep manually: System Preferences > Energy Saver > Computer Sleep > Never.
Good luck!

The only time the sound/speaker and mic don't work is when I answer or make a call

The only time the sound/speaker and mic don't work is when I answer or make a call. They both work fine for everything else. This has been going on for over a month. AT&T said it's Apple and Apple said it's AT&T. I've been around that cycle twice.
When I dial a call, I can see the status words on the screen but can't hear the ringing. If the person I'm calling answers, my screen will show the call was connected and the call timer will begin but I can't hear anything and they can't hear me. If one of us doesn't end the call, the timer keeps going and I'm being 'charged' for dead air. (Of course, one of us disconnects so mins/cost isn't an issue, I'm just adding the info in case it helps solve the problem.) If they don't answer, the call will go to their greeting but I can't hear it and wouldn't be able to leave a message anyway because my voice isn't going through. However, they will get a voice mail alert and see that I called but no message was recorded.
If some one tries to call me they will hear ringing but when I answer, they can't hear me and I can't hear them. If I don't answer, they will hear my greeting and can leave a message. I can retrieve and hear my voice mail. Trying speaker phone and headsets didn't change anything for calls out nor for calls in.
I have 4.3.3 and have synched, reset, rebooted, turned things on and off and off and on and took the SIM card out of the phone and out of it's tray and put it back in. I've done all that several times in just about every combination and order possible.
Hopefully the following will provide good clues: On only about three of the many attempts I've made to get it to work correctly that included taking out the SIM card, I could make and/or get one or two calls with no trouble but then the problem comes back. Also, when I swapped the SIM card with another iPhone4 on my plan, the other phone would work with my SIM card but my phone still would not work with the other SIM card. The last fact makes me think it is an Apple issue. I'll go to an Apple store (genius) this weekend. Will I be wasting my time and gas? Anybody have any experience with this problem?

Let me try and address some of your questions. I'm only on a pc, so a few of these answers might be slightly different on a Mac, but not too different (such as control click rather than right click).
First, when you buy something on your phone, be it apps or music, it's transferred from your phone to your Mac when you sync your phone. So those apps should now be in you iTunes library. ( IF for some reason you can't find them there, you should be able to download them again, either onto your phone or through iTunes. On your phone, go to the App Store > Updates and you'll see a "Purchased" link at the top of the page, you can view all purchased apps here and redownload them. In iTunes, you can go to Store > Check for available downloads. )
Whenever you plug your phone in, it should create a backup of everything you have on the phone. This is how, provided restoring your phone as a new device doesn't fix the issue (more on this later), you can put all of your music and apps onto the new phone. You can always plug your phone into your Mac and the first thing it should do when it syncs is create a backup. If you want to be sure, you can right click on your device in iTunes (on a pc) or I assume control click on a Mac and select "backup".
The genius will take care of the sim card and setting up your phone, however you will have to put all of your music and apps on it, unless you ask the genius, I've never bothered since I know how to do this.
You should have no problems restoring from a backup if they give you a new phone. However, it's probably safest to try and create a backup of your last phone backup before you restore it as a new device. I suggest you refer to http://support.apple.com/kb/ht1414 for more information about that.
I've had no problems with my new phone so far.
I'll try to keep checking this thread if you have any other questions or need more clarification.
Edit: I should say we never did figure out what exactly was wrong with my phone. The only thing I can think of was that it got a lot hotter than the phone it replaced, and also the phone I just got yesterday to replace the malfunctioning one. But otherwise they saw no problems with the hardware, but acknowledged it must have been the hardware since we tried everything else. Also I would go with a list of all the things you tried with this phone, for your own reference and the genius's, especially if you're not confident in your tech skills Showing the genius that you've tried: different sim cards, updating the software, restoring it from a backup, and now restoring it as a new device, should convince them that you've done everything you could, and the only other answer is hardware problem.
Also if you don't already have one, make a genius appointment ASAP. Most stores are very busy and their appointments fill up fast. I always suggest making an appointment as early as possible, hopefully before the retail store hours when they've only got techs there because they usually are less stressed and have a bit more time to spend with you. The easiest way to make an appointment is to download the Apple Store app. It detects the closest Apple store from you and makes it quite easy to schedule a genius.
Message was edited by: deddinty

Sound buzzing and screen crush

Similar Messages

Maybe you are looking for