Sound CALL for ipnone 4

Hello I have downloaded itunes but the inside has no tonus.with the tonus You can spend a song on iphone to do it Sound CALL...help me please

Quote
Originally posted by Wonkanoby
• Two PCI Express x16 slot (supports PCI Express Bus specification v1.0a compliant)
• Two PCI Express x1 slots (support PCI Express Bus specification v1.0a compliant)
• Three 32-bit v2.3 Master PCI bus slots (support 3.3v/5v PCI bus interface).
thats the diamond
and i agree i cannot see 7 slots only 6
and one of those being the SLI card port, i still wonder where the 2 PCIe x1 slots are supposed to be...
ASUS put them between the 2 PCIe 16x slots, gigabyte put them above. MSI seems to have put them using special invisible plastic...

Similar Messages

My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
Along with the original poster, I'd appreciate any help.
As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

No sound alerts for messages or phone calls since upgrade

I too had no sound alerts for calls or messages since upgrading but then I discovered that the 'Do Not Disturb' option had been somehow switched on after I upgraded. If you have a moon icon at top corner of your screen that's what's happened. You need to go into Settings>DoNotDisturb and switch it off. It worked for me so hope it helps someone else.

Look in the Notifications settings to see if the update turned them off there. If they are turned on and you are still not getting alers on the lock screen, reset your phone. Hold down Home and Power buttons at the same time, wait for Apple logo to appear and wait for the phone to reboot itself.
See if you get alerts with the phone locked. If you still don't get alerts, do a Reset Network Settings reset, Settings => General => Reset => Reset Network Settings. You will have to re-enter your wifi passwords.
If this doesn't help do a Reset All Settings reset. You won't lose any data or content , but the settings on the phone will all be reset to factory defaults and you will need to go in and turn the things you turned on and off on and off again.

My iphone 4 does not make any sound except when i have call. Any sound notification for example whatsapp or email or playing song i could not hear a pip, but when blug the earphone i could hear all sound via earphone, any advise??

My iphone 4 does not make any sound except when i have call. Any sound notification for example whatsapp or email or playing song i could not hear a pip, but when blug the earphone i could hear all sound via earphone, any advise??

Check the Mute switch, which is on the left side of the phone above the volume buttons.

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

Sound Setting for "Silent" or "Vibrate Only"?

I'm new to the iPhone, having bought an iPhone 4 last week. I'm looking for a way to control the sounds with a little more granularity. Or maybe I'm just missing something. Here are some things I'd like to do:
1. Turn off the "outgoing SMS message" sound. Keep the incoming SMS sound on.
2. Be able to easily put the phone into "Vibrate" mode. All sounds turn to vibrate.
3. Be able to put the phone into "Silent" mode. Keep it on, but no sounds at all.
If anyone can point me in the right direction, I'd be very grateful.

See what the manual says about sounds http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf , page 159
Sounds and the Ring/Silent Switch
Switch between ring and silent mode: Flip the Ring/Silent switch on the side of iPhone.
When set to silent, iPhone doesn’t play any ring, alert, or effects sounds. It does, however, play alarms set using Clock.
Note: In some countries or regions, the sound effects for Camera and Voice Memos are played even if the Ring/Silent switch is set to silent.
Set whether iPhone vibrates when you get a call: Choose Sounds. To set whether iPhone vibrates in silent mode, turn Vibrate under Silent on or off. To set whether iPhone vibrates in ring mode, turn Vibrate under Ring on or off.
Adjust the ringer and alerts volume: Choose Sounds and drag the slider. Or, if no song or video is playing and you aren’t on a call, use the volume buttons on the side of iPhone.
Set the ringtone: Choose Sounds > Ringtone.
Set alert and effects sounds: Choose Sounds and turn items on or off under Ring . When the Ring/Silent switch is set to ring, iPhone plays sounds for alerts and effects that are turned on.
You can set iPhone to play a sound whenever you:
Get a call
Get a text message
Get a voicemail message
Get an email message
Send an email message...
So,
1) not possible to have only one sound for SMS out/in
2) use the ring/silent switch
3) Alarms set by your clock will have sound, even in silent mode (ring/silent switch switch active)
Message was edited by: Ingo2711

No sound call Incoming outgoing

I have an iPhone 5, iOS 614.
My provider is base, in Belgium.
On some calls, there is absolutely no sound.
For both myself and the person on the other side.
Can be incoming calls or outgoing calls, no difference.
Happens on average more than once per week.
What is this, how to solve?

User troubleshooting from the User Guide is restart, reset, restore from backup, restore as a new device. Continue with the steps until you have corrected the issue. If the issue is not corrected after completing all of the steps, then make an appointment with Apple or your Authorized Service Center to have the hardware checked.

Not getting any sound alerts for new mail, key lock etc

I'm not geeting any sound alerts for new email, sent mail, clender alerts etc for my iphone 4. Though all my alerts are on. Also I can't hear the incoming call but the speaker works. I've already upgraded to latest 4.3.3 Any help appriciated.

Did all that...talked to Apple 5 hours and I did everything they said..they don't kno what the problem is

Why can't I get sound notification for my email anymore?

I am no longer able to get sound notification for send or receive email nor can I get sound notification for incoming phone calls. What happened and is there a correction?

Before doing anything else, is your ringer switch in silent mode? I'd try toggling the switch a few times to make sure it's working. The phone should vibrate when you move the switch from on to silent. If it doesn't then the switch may be broken.
Next make sure the volume for notifications is not off. Check the Sound settings for this. Changing the volume there should also cause your (phone) ringtone to play. If it doesn't then there is something very wrong.
The only other thing I can suggest if the above doesn't help is doing a hard reset of the phone. Hold power and home buttons down until screen goes dark and Apple icon appears, then let go.
If that doesn't work, then the only other thing you can try is doing a Backup and then a Restore in iTunes. If that doesn't work, then there's a hardware problem.

Sound Card for Power Mac G4 Quicksilver

I was having a look around for sound cards for the Power Mac G4 Quicksilver and read about the M-Audio Revolution 5.1 and 7.1. Are these the best sound cards available for the G4 Quicksilver? Are there better ones?
Sam

I've started using the iMic by Griffin. It's an USB stereo input/output audio adapter with both mic and line level input/ouput. They provide a free download of their audio editing software called Finyl Vinyl (I think), which lets you record and edit audio mainly (though you can input video with the adapter - need different software though). Though it's intended mainly for recording from turntables, you can input and edit most any audio with a mini plug to RCA jacks cable. I've used a cassette deck and a mini disc recorder so far. I haven't played much with the mic input so far, but the line in audio is very good (I've worked in community radio for a while now, so I have a pretty good ear). The adapter also works with other audio editing software like Audacity and Logic Express (possibly Garageband too, I haven't tried). And it's available for under $30 on places like eBay.
http://www.griffintechnology.com/products/imic

Fixed my sound issues in KDE (no sound except for system events)

First, I'd like to say that I am by no means an expert and what I have below represents nearly a week of installing/reinstalling arch and trying various things to get my sound working correctly in KDE. In fact, yesterday I decided that I was just going to use mint because, even though I don't like it, at least the sound worked for me. I did decide to give it one more try this morning and finally was successful.
My system has an AMD A8-3850 processor, which I never would have bought if I had known all of the compatibility issues I would end up having with it. My problem was that I would hear event sounds in KDE (such as the start up sound) but I would get no sound within my browsers and flash and probably elsewhere. Also, even though I was hearing the system sounds, kmix showed my volume at 0% and that my device was muted. Trying to select the device in kmix didn't accomplish anything at all. Because of this, I had a feeling that the problem was that my sound was defaulting to my HDMI sound, which turned out to be right.
I'll try to be as brief as I can about the process I followed.
The first thing I did was get asoundconf from the AUR. I was then able to set my non-HDMI sound card as the default.
johnr@bitstorm ~ % asoundconf list
Names of available sound cards:
Generic
Generic_1
johnr@bitstorm ~ % asoundconf set-default-card Generic_1
johnr@bitstorm ~ %
From that point, I installed PulseAudio and worked my way through the PulseAudio page on the arch wiki. After which, I was able to bring up the PulseAudio Volume Control (pvaucontrol) and turn off my HDMI sound all together.
Still, my sound did not work, though. After some searching I came to this page: http://www.freedesktop.org/wiki/Softwar … ktops/KDE/ which basically said that my kmix wasn't compiled with with pulse audio support. After a search for kmix on the AUR, I came to this package: kdemultimedia-kmix-git
After installing that, I reboot and all is right with the world... or at least my sound in KDE.
So that's it. I am sorry if this is poorly written, I do not write things like this very often. I was so happy, though, that I was actually able to fix it and I did want to share since I imagine that I am not the only one to have this problem.

Hi @shayanaijaz
Thank you for your reply.
Here is a link to HP Notebook PCs - No Sound from the Speakers (Windows 7). You can skip any steps you have previously done.
If after installing the original drivers from the recovery manager you still have an issue with the sound, I suggest you do a recovery back to factory.
HP PCs - Performing an HP system recovery (Windows 7)
During the recovery you will see an option to backup your personal files to prevent data loss.
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
You could also test the audio card just to rule that possibility out.
HP Notebook PCs - Testing for Hardware Failures (Windows 7, Vista)
My last suggestion is to contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

My 5s is stuck on one sound notification for mail.

My iPhone 5S will not let me change the sound settings for ring tone/text tone/new mail/etc. When I go to Settings--Sounds and make choices, they show on the screen, but the old/original sounds are still what the phone emits when in use. I did update to 8 (or whatever it's called) and things don't work like they used to. But these sound notifications are my basic problem. Any suggestions? Thanks, Ron

Try inserting and removing the headphone jack seven or eight times.

Lost sound notification for incoming facetime

I recently lost the incoming sound that notifies me of a FaceTime call. I have checked all settings and cannot find anything I have changed.

Hey there Mackenzie4.5,
It sounds like you are not getting the sound notification for your FaceTime calls that are coming in. I would check this setting in the Notifications section specifically to verify there is a sound setup to notify you:
About Notifications on iPhone, iPad, and iPod touch
Go to Settings > Notifications to verify that the app supports notifications. If notifications do not appear in the Notification Center, make sure that the Notification Center setting for the app is enabled.
Make sure you’re signed in to your Apple ID.
If you’ve recently installed an app or restored a backup, open the app to start getting notifications.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Upgraded Qosmio X500-10T to Win 8.1: Sound drivers for 5.1 over HDMI

Hello *brilliant* Toshiba community,
I have recently upgraded my Qosmio X500-10T from 64-bit Windows 7 to 64-bit Windows 8.1.
I have left Windows to download driver updates.
My setup: Qosmio (HDMI) => Yamaha AV receiver (HDMI) => Samsun LCD TV.
_The Problem:_ Playing a video file (in MPC-HC) with 5.1 sound only outputs 2 channel PCM.
Would it be better to install the Win 7 drivers from Toshiba even though they are older and for a different OS, or install windows 8.1 drivers from another Qosmio, or leave the Win 8.1 drivers found by Microsoft?
This driver issue is made more problematic as I don't actually know what the technical hardware components are in the machine so its not as though I can find a win 8 driver for them.
As always any help or suggestions are greatly appreciated.
Buzz

Hi
From my knowledge the Win 7 drivers are totally different from Win 8.1 drivers and I doubt that Win 7 driver would work properly on Windows 8.1 system. However, you can test such Win 7 drivers too. But of course I would recommend you to use the Win 8.1 drivers released for other notebook series.
As Im not mistaken the Qosmio X500 needs 2 sound drivers: Conexant (chip CX20583-10Z) sound driver as well as the nVidia sound driver (for HDMI)

Windows Xp sound driver for Presario A 975em

I just downgraded my Os from Vista to Xp and i cant find any sound driver for my Notebook pls help.I about Compaq Presario A975em
Thanks in advance. Best regards

Hi,
Before Conexant Universal Audio Architecture (UAA) here
Conexant High Definition Audio Drivers here
This will create a swsetup folder in c drive ("C:\swsetup\sp34200")
Installing Audio drivers may result in an error. But continue with the following steps to get the audio driver installed correctly.
Open the Device Manager:
1. Click on Start and select Run. Now type devmgmt.msc and press enter.
2. Right click on "Audio device on High Definition Audio Bus" and click Update driver.
3. Select "Install from a list or specific location"
4. Click Next. Then select "Don't search, I will choose the driver to install"
5. Click Next and then select "Sound, video and game controller" from the list.
6. Click Next and then click Have Disk.
7. Click Browse C:\swsetup\sp34200 folder and select the .inf (wis30b2a) file and click open and Continue with the onscreen instructions.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Sound CALL for ipnone 4

Similar Messages

Maybe you are looking for