Sound card not being detected by alsa

I compiled a kernel using the /usr/src method as per the wiki page. However, I've been having some problems with ALSA. I compiled in ALSA and support for my card (I think I did at least) as modules. alsaconf finds my card fine, but alsamixer dies with this message:
alsamixer: function snd_ctl_open failed for default: No such device
I tried using strace on it:
open("/etc/ld.so.cache", O_RDONLY) = 3
open("/usr/lib/libncursesw.so.5", O_RDONLY) = 3
open("/usr/lib/libasound.so.2", O_RDONLY) = 3
open("/lib/libm.so.6", O_RDONLY) = 3
open("/lib/libdl.so.2", O_RDONLY) = 3
open("/lib/libpthread.so.0", O_RDONLY) = 3
open("/lib/libc.so.6", O_RDONLY) = 3
open("/usr/share/alsa/alsa.conf", O_RDONLY) = 3
open("/dev/snd/controlC0", O_RDONLY) = -1 ENODEV (No such device)
open("/dev/aloadC0", O_RDONLY) = -1 ENODEV (No such device)
alsamixer: function snd_ctl_open failed for default: No such device
Process 28188 detached
However, /dev/snd/controlC0 exists, even though the output of the above would lead me to believe differently.
What else is weird is, mplayer and xmms can play sounds just fine, but Firefox and aplay cannot.
More information about my setup is available from the output of an ALSA info script, here: http://pastebin.ca/591136 and http://pastebin.ca/590970
Any idea what's going on? This is very strange. Thanks.
Last edited by intimidat0r (2007-06-27 01:57:24)

Silly question, installed the drivers for the z?

Similar Messages

  • Ethernet Card Not being Detected on my iMac 27Inch (Mid2010)

    Hello,
    I have only had my iMac for a couple of months, and it appears to have developed a fault. I have a network router, and a network cable is plugged in however, the Network Panel keeps reading as "Cable: Unplugged". It is not, i can assure you.
    When I got into the About This Mac > System Profiler, it has "This computer does not appear to have any PCI Ethernet cards installed." under the Ethernet Card option
    I'm currently on Wireless (very skechty), and that also keeps dropping out even though the router is less a foot from the iMac.
    Any Solutions or Advise please?
    Thanks Phill C

    I have the same problem after I installed LION on my imac 27" (Late 2010). It was working for few days and then after I restarted my computer my network card just went dead. Since I have several partitions I can boot back to Snow Leopard and it shows me ethernet just fine. So it means that LION has bugs and many bugs from what I can tell. It is wide spread problem and not sure if apple is doing anything about htis.

  • K9VGM-V on board audio not being detected

    Hi all,
    I just bought a new system yesterday which came with the MSI K9VGM motherboard and also came with 4Gb RAM in a matched pair of 2Gb sticks- but according to the specs, the board can only deal with up to 2Gb. Is that 2Gb per slot? Or can it only handle 2 x 1Gb sticks?? I'm a little confused because both bios and XP are telling me that I have 3Gb installed....
    Also, I'm having a hard time getting fully up and running with sound. I've installed XP and have done all Windows updates, although I was getting a lot of crashing while that was happening. I have installed the MSI drivers for my video card. I have installed the MSI Live Update app too. Besides that, I've not done anything else yet. I have added in a Linksys wireless receiver which was updated through Windows Update, as well as a Soundblaster Audigy 2. I was given a driver disc with the motherboard which just contained the HD Audio driver- which I installed, but the onboard sound isn't being detected by Windows (well, I can't choose it anyway). In Device Manager, there's no hardware unaccounted for so I'm a bit puzzled. Also, the Audigy 2 is being detected, but the sound is coming through very badly. Cracking and popping when any noise is made.
    Oh and Windows is taking way too long to boot up, probably about 30-40 seconds on the black splash screen.

    This was a brand new system that came with a 500Gb SATA. Initially I clean installed onto the SATA but with my old Audigy card and Linksys Wireless card installed too, as well as my old 200Gb IDE drive which still contained my old XP install. At first, this booted up and I thought I might get away with it because all it was asking me to do was re-validate my copy. But it quickly became clear that this wasn't happening. The drivers weren't recognising the mainboard and wouldn't install, neither would the NVidia drivers. So I gave up on that option.
    Today, I have clean installed on the system with nothing additional plugged in- just a clean install on the SATA drive, and since I installed XP I've done nothing except collect all the updates for my board that the MSI site gives. I have installed all of these, including the Realtek HD audio drivers. The entire time, the computer has never asked for any audio drivers or tried telling me that I have an audio card that's not installed. The whole time, Device Manager has just had the five speaker icons under 'Sound, Video and Game Controllers' for the ones I listed above. No mention of the Realtek there. All I have in Unknown Devices is a 'Network Controller' and I don't even know what that is. It can't find any drivers for it....
    I'm normally able to deal with this issue upon a new install, but I'm stumped with this.

  • IPhone 6 and iPod Touch 5 not being detected by iTunes 12

    iPod 5 and iPhone 6 is not being detected after I downloaded iTunes 12.1.2
    Tried changing the lightning conductor, that didn't help either.
    Re-installed iTunes but it was of no use. :/

    See iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • [SOLVED]HDMI port not being detected

    Hi everyone. Since the last update (which I did yesterday) the HDMI port on my laptop is not being detected anymore. Before everything was working as expected. The xrandr output is:
    Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
    LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
       1366x768       60.0*+
       1024x768       60.0 
       800x600        60.3     56.2 
       640x480        59.9 
    VGA1 disconnected (normal left inverted right x axis y axis)
    The graphics card is Intel HD 4000. here's the lspci output:
    00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
    00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
    00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
    00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
    00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
    00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
    00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
    02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
    02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10)
    02:00.2 System peripheral: Broadcom Corporation Device 16be (rev 10)
    02:00.3 System peripheral: Broadcom Corporation Device 16bf (rev 10)
    03:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01)
    I tried downgrading mesa, mesa-libgl and intel-dri to their previous versions (9.1), but it didn't help. Is anyone else experiencing anything similar? What are your suggestions?
    Thanks in advance.
    Last edited by Caspian (2013-03-24 09:20:36)

    My X220 laptop has a DisplayPort which I plug in a DisplayPort to HDMI adapter to connect to a TV.  Working fine here after I updated this morning.  The X220 is Intel SandyBridge (HD3000 I believe).
    $ xrandr
    Screen 0: minimum 320 x 200, current 1366 x 768, maximum 32767 x 32767
    LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 277mm x 156mm
    1366x768 60.0*+
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    VGA1 disconnected (normal left inverted right x axis y axis)
    HDMI1 connected (normal left inverted right x axis y axis)
    1920x1080 60.0 +
    1920x1080i 60.1
    1280x720 60.0
    1024x768 75.1 70.1 60.0
    1440x480i 60.1 60.1
    800x600 75.0 60.3
    720x480 59.9
    640x480 75.0 60.0 59.9
    720x400 70.1
    DP1 disconnected (normal left inverted right x axis y axis)
    HDMI2 disconnected (normal left inverted right x axis y axis)
    HDMI3 disconnected (normal left inverted right x axis y axis)
    DP2 disconnected (normal left inverted right x axis y axis)
    DP3 disconnected (normal left inverted right x axis y axis)

  • My Ipod Nano 5th generation is not being detected by Widows and Itunes. I have tried everything based on the trouble shooting tips outlined. Has anyone had this situation before? How was it resolved. My Ipod is just out of warrenty

    Have done all trouble shooting tech a through Apples and still have not resolved issues on Windows and itunes not detecting my Ipod  nano 5th generation device. Tried restoring the device manually using disk mode and still not being detected by the computer. Device is our of warenty as when service repair charges are $125.00 dolars more than I paid for this device. There must be some way to restore the entire device to factor settings without having to be connected to itunes and Windows. I wish I could connect but again device is not being read. I have another Ipod that is 8GB instaed of 16GB and it works fine. The sad thing about this situation is that my 9year old daughter worked hard doing delivering fliers for a long time to save her money to buy this 16 GB 5th generation Nano. Otherwise the Ipod works well but will not syncronize songs as it is not being detected. Maybe this is a result of corrupt files that got onto my daughters Ipod somehow and thus causing it not the be detwected through the USB connection thus as a result not be understoud as a working device through Windows and itunes. If anyone can help me out there including itune techs that would be well appreciated, but for now my daughter is not able to add new or delete any songs on her ipod as well pictures, and everything. Thanks

    Try changing the cord. I could NOT get my computer to recognize my iPod 5th Gen until I read somewhere that different apple devices use different cords. I was inadvertently using my iPad cord and that caused my computer to not recognize my ipod.

  • Ipod 4g 32G not turning on, not charging (on multiple cords, both comp and wall, 4 20min), not being detected by Itunes or Windows 7 64bit OS, will not reset, tried taking it out of "DFU", NO DMG, Itunes up2date, All I'm getting is a blank black scrn

    Ipod Touch 4th generation 32G not turning on, not charging.
    I have used multiple cords on both computer USB and wall USB converters. I let it sit there for over 20 min with each attempt.
    It is not being detected by Itunes or my Windows 7 64bit OS. I have tried all 4 of my USB ports (both USB 2.0 and 3.0), with 3 different chargers.
    Holding home and power button will not reset.
    Tried taking it out of "DFU" mode but Itunes won't detect it, I didn't think that would work anyway.
    NO DAMAGE, I have been very careful with it, aside from a few minor scratches. (that you can't even see unless the light reflects them)
    My Itunes is up to date, as is my OS.
    All I'm getting is a blank black screen. It has been working fine on this computer before. I have no idea what could have happened. I'm at my wits end here.

    See if you missed anything here:
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

    My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.  I've since deleted this podcast with no luck.  I've restarted both the phone and the computer, still no luck.  One computer is running Vista and the other Windows 7, both have the latest Itunes Update.  Anyone have a fix for this?

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • Hp v235r flash drive not being detected on my computer

    Hi,
    I am using hp v235r flash drive for more than 5 years. It's not being detected on my computer since two days. Can any one solve my problem, as there is lot of important data stored in it and hasn't been backed up recently.

    Hello budda48,
    Its possible the driver for the pen drive is corrupted in your computer, or the drive has met its end of life.
    First, confirm that the Pen Drive is seen by other computers. Plug it in to another computer that you havent tried yet.
    If it is not working on other computers, then the usb drive is corrupted and there wont be anything else we can do.
    If it is working in other computers, then try these steps to troubleshoot the Pen Drive.
    Confirm that the port on the computer is not bad. Choose a different port to insert the drive. Next…
    Part 1: Make sure that the drive has a drive letter assigned in Disk Management.
    Open Computer Management by right clicking on Computer and clicking Manage.
    Click on Disk Management. Give it a moment to open the view of the drives installed.
    Look for a drive that does not have an assigned drive letter and is not labeled as System Reserved.
    Note: System reserved drives are reserved by Windows and will not allow you to assign a letter.
    Right-click the unlabeled drive and click Change drive letter and paths…
    Click Add and then click OK to select the first available drive letter.
    If the Change drive letter and paths… option is not available, make sure that the drive is Online.
    If the drive is Offline, right-click the disk number and click Online.
    Part 2: If the drive does have a letter assigned and it still does not work, uninstall the driver.
    You can safely remove any usb drivers that are not in use (hidden drivers). Devices that get plugged in later will simply reinstall its needed driver again.
    Remove the pen drive from the computer if it’s attached.
    Right click Computer and click on Properties. In the System window on the left side, click on Advanced System Properties.
    Choose the Advanced tab and click on Environment Variables… button at the bottom.
    Under System Variables, click on the New… button
    Type this in the box that pops up. Variable Name: devmgr_show_nonpresent_devices and also give the Variable Value: 1
    Click OK on all the open windows to close them out.
    Go to Computer Management again and click on Device Manager. Go to View at the top of the window and click on Show Hidden Devices.
    Click on the drop down arrow for Universal Serial Bus Controllers to open the list. Look for any USB Mass Storage Device that is hidden (greyed out) and delete it. There may be several and it’s ok to delete all those hidden USB Mass Storage Devices.
    When you connect the pen drive to the computer again, give it a minute to reinstall the driver.

  • My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

    My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

    iPhone, iPad, or iPod touch not appearing in iTunes

  • HT203128 My iPad is not being detected by iTunes after I updated to the latest version of iTunes.  What should I do?

    After updating to the new version of iTunes, my iPad 2 is not being detected when I tried to sync.  Any solutions?

    A few things to try. Any one or a combo mayhelp
    Reset your iPad.
    Hold down the sleep and home keys for about 20 seconds. Then plug it back in and see if it is seen now.
    Try a different USB port
    Reboot your computer
    If you have a PC:
    If that doesn't fix it, go into the control panel, add/remove programs. Uninstall iTunes, apple Mobile device service, apple application support.
    Then redownload and reinstall iTunes. then try again.

  • My iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

    my iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

    If you can't get it to shut down or restart when holding down the Home and Sleep/Wake buttons and you can't get it recognized in iTunes to restore it, the iPod may have suffered a hardware failure and will need to go to Apple for service. Someone else here may have additional suggestions, though.
    There is no "fifth generation" iPod touch, by the way, just for the sake of clarity; not yet, anyway.
    Regards.

  • My iphone is not being detected by the itunes on my laptop with windows 8

    the iphone is not being detected by the itunes on my laptop with windows 8
    someone please help

    iPhone, iPad, or iPod touch not appearing in iTunes

  • Iphone 4s not being detected by windows 8 laptop and itunes

    Hey all,
    My iphone 4s is stuck in recovery mode and my laptop is not detecting the iphone when i plug it in. I plug in my other iphone and ipods fine but this iphone 4s is not being detected so i know it is not the cables. I have uninstalled all of the apple apps and drivers from my computer including itunes and re-installed them again and still nothing. When i turn on the iphone it shows a blue itunes logo with a cable indicating for me to connect it to my laptop, but it turns off after 30 seconds which doesn't allow it to restore thus a notification shows up on itunes saying that the iphone could not be found.
    I downloaded the latest version of ios, but could not install it since the iphone is not responding. so right now it is basically a paper weight.
    Is there anything i can do?
    thanks all....

    Hello Bethany2
    Try creating a different user for your computer and open iTunes to see if shows up in that newly created user. The article below will home a few more troubleshooting steps, some of which you have already tried.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    -Norm G.

  • Ipad 4 ios6.1 not being detected on itunes through wifi.

    Hey guys, i don't know what's effing problem is with the itunes??
    i have enabled the wifi sync option though, still my ipad is not being detected on the itunes.
    Once in a while i restarted my ipad and then the ipad was detected. I transferred some of the files and then closed the itunes. After a while i opened the software again and got the same issue..
    please help.
    Thanks

    you have to make sure both your wifi router and the computers firewall are not blocking the ports used for wifi sync with itunes

Maybe you are looking for

  • MIGO posting  for asset

    Hi During creation of MIGO for asset we got error " YOU CAN NOT POST TO ASSET IN COMPANY CODE BP01 FISCAL YEAR 2011" We have copied an existing one asset.Plz tell us the solution.

  • What are the Manual check Deposit Tables and  Fields(FF68)

    Hi Gurus, I have reqirement to get get Details about  SlipNO,Cheque NO,Cheque Date,Posting Date, Party code,Bank key,Currency ,Amount,Bank Account,Value Date,Entry Date,Banker's name. could u help me Thanks in Advance Sivakumar.

  • Order Management...BOM

    Hi All, I am new to Peoplesoft.. and am working on Order Management.. from where can i download Order Management BOM and screen details.. basically am looking for a doc specifying the underlyig table structure of order management and about teh screen

  • Choosing the smtp to send email

    I have two accounts. A and B account. The standard account is A. When I am reading the email from account B and I need to answer it, I would like send this email from account B. But the iPhone insist to send my email by account A (standard). The ques

  • HOW TO CONFIGURE CALLBACK IN WINDOWS-XP AND WINDOWS-98

    Dear Friends. We have Cisco 3640 with 8 PORT Asynch/Synch card (Low speed) card.The serial port is configured with asynch mode and the normal dialup modem is connected with that port.The callback is configured in the port. kindly help me to configure