Sound card not detec

hello i have a problem , i am trying to use 2 sound cards on my system? . audegy 2 platinum and the second is the on board? sound crad? ... the problem is that even though i enable the onboard sound card from bios still its not detected by the machine unless i remove completely the audegy from the pci?any solution on how 2 run both of the cards at the same time ??NB : i also have a sound blaster li've platinum? card? ... it was also not detected when i pluged it in the pci slot....

I'm having the same problem too.
Sometimes I can get it to work - but that's more luck than anything else. Xmusic was working today until
I decided to install the latest Nvidia driver - that was the end of it and for the past 3 hours I have tried
all the usual remedial methods:
- Have checked that the device is not sharing - confirmed both during POST and with DevManager!
- Removed card and changed slots
- removed drivers, reinstalled, tried all 3
- cleared CMOS[removal of battery]
System Details
A8N-E bios rev 03
AMDX2 4400
4GB RAM DDR2 Dual
Asus 7800GTX 52
XP64
X-FI Extreme[frustration]
Some other info.
About 2 nights ago the same thing happened - couldn't get X-FI to work. Did the same stuff as above
and eventually gave up. Turned the machine on the next night and there is was like it had never gone
south .. Then I stupidly decided to install those latest NV drivers...
CJ
Message Edited by CrazyJak on 06-06-2006 0:44 PM

Similar Messages

  • Reformatted My Computer now sound card not detec

    I reformatted my computer now I have no sound. I can't find my CD for install. When I go to my sound settings -->Audio tab it shows all my options faded. I did the autodetect on this site and it says I have a Sound Blaster Li've! 5. When I go to the device manager it says I have a Creative SBLi've! Gameport. I try and update it but it says I have the latest update. I'm assuming I need to run whatever program was on the original disc that came with the card. Is there a place I can download it's? I tried downloading the applications here but I must be getting the wrong ones.

    When you went into the device manager did you check that the drivers were all working.if they are you could try and re seat the card.you can find the di'vers on this site in downloads,remember before installing any new drivers uninstall all the old drivers.http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+XP&region=&Product_Na me=Li've%2+5.&Product_ID=50&modelnumber=&driverlan g=033&OS=0&drivertype=&x=27&y=3make sure you select the proper drivers.if this is a dell computer it has differnt drivers.

  • Audio / Sound Card not working after Soundblaster.USB.Audio.Support.pkg

    Ok, first - confess - it was stupid. I installed the Soundblaster.USB.Audio.Support.pkg package, which i downloaded from the internet, to make the harman Kardon Soundsticks (USB-Version) working, as nothing happened when plugging them in.
    First, it ruined the mouse working after reboot and also disabled the internal sound card, not even as device available anymore. I fixed the mouse problem by installing IOUSBFamily-281.4.0-log(PPC).dmg
    How can I make the sound card be available and working again ? I also updated to 10.4.11. Did not help ! Can you ? Thanks !

    Welcome to the Apple discussions.
    First, look in system preferences, accounts, and for your login account look at login items to see if there is a Soundblaster USB module that is loaded when you reboot your system. Delete it if there is one.
    If you updated to 10.4.11 by software update, download the combo update from http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html . The combo update is a complete update for all updates to 10.4, and installing the combo sometimes fixes odd things.

  • [SOLVED] Sound Card not recognized on Macbook (5,1)

    Hello,
    I had no problems installing Archlinux on my Macbook (5,1).  In fact, the first time I followed the Wiki's instructions for installing ALSA, I could play sounds just fine.  However, ever since my first restart, the ALSA daemon complains that I have no sound cards installed.  lspci shows that it sees an audio device, but /sys/modules/snd no longer exists.  I do not know much about useful diagnostic information for this situation, so please let me know what else could be of use.
    Thank you,
    Rob
    Last edited by rennis250 (2009-07-28 20:58:00)

    I had forgotten that I installed OSS, which caused conflicts with a previously installed copy of ALSA.  Once I removed OSS completely, rebooted, and went through the ALSA setup again, I had fully working sound.  This problem can be marked as solved.
    --Rob

  • [SOLVED] Sound card not recognized

    I tried following the ALSA setup guide on the Wiki to get my sound working but I don't think Arch recognizes my sound card.  I found out from lshwd that the module is snd-intel8x0 so I modprobed that and snd-pcm-oss, changed the values in alsamixer, added myself to the audio group, installed alsa-utils, alsa-lib and alsa-oss and restarted everything but I still have no sound.  Here's some output:
    lsmod | grep '^snd'
    snd_intel8x0 28700 1
    snd_ac97_codec 95780 1 snd_intel8x0
    snd_pcm_oss 38688 0
    snd_pcm 69124 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    snd_seq_device 6796 0
    snd_mixer_oss 14592 1 snd_pcm_oss
    snd_timer 19076 1 snd_pcm
    snd 44516 9 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_seq_device,snd_mixer_oss,snd_timer
    snd_page_alloc 7816 2 snd_intel8x0,snd_pcm
    ls -l /dev/snd
    total 0
    crw-rw---- 1 root audio 116, 0 2007-07-12 21:35 controlC0
    crw-rw---- 1 root audio 116, 24 2007-07-12 21:35 pcmC0D0c
    crw-rw---- 1 root audio 116, 16 2007-07-12 21:35 pcmC0D0p
    crw-rw---- 1 root audio 116, 25 2007-07-12 21:35 pcmC0D1c
    crw-rw---- 1 root audio 116, 26 2007-07-12 21:35 pcmC0D2c
    crw-rw---- 1 root audio 116, 27 2007-07-12 21:35 pcmC0D3c
    crw-rw---- 1 root audio 116, 20 2007-07-12 21:35 pcmC0D4p
    crw-rw---- 1 root audio 116, 33 2007-07-12 13:02 timer
    The wiki says that if you have controlC0 and pcmC0D0p in that output then the modules have been loaded properly and they are both there so I'm not sure where to go from here.  Your help would be appreciated.
    Last edited by Thrillhouse (2007-07-12 22:23:29)

    you need to start alsa if you haven't already done so... /etc/alsa start
    prolly better to run alsacoconf if you still have problems

  • Cirrus Logic sound card not working - Just a quick question (iMac 27-inch)

    Hi, so as many have experienced, my sound card is not registering on my new iMac, on the Windows Vista side. I get sound out of the Mac side, just nothing from Windows.
    I was wondering, would a USB sound card or sound pod solve the problem? I am not amazing with computers... But would buying one of those be a possibility?
    I was looking at something like this...
    http://www.emicrophones.com/p-1230-andrea-pure-audio-usb-sa-full-duplex-usb-soun d-pod.aspx
    If anyone who knows what they're talking about could give me some input on this, it would be greatly appreciated. I do a lot of video editing on the Windows side, so having no sound would be an extreme burden.

    Hi - I had this problem when I installed WIndows Vista (32 bit) on my i5 iMac. I believe I resolved the problems by finding the drivers on the OSX install disk. What I am struggling with is updating the video drivers - but that is another story...
    Steve

  • Sound card not working anymo

    Hello. i've been working on this for the past 5 hours, but i've taken a breath and now i'm going to post here to see if any one can help me out. Im working with 2 computers, heres one:
    [Computer One]
    Yesterday, i first noticed that when i plugged in my microphone (a new one i bought) to the sound card i have (Audigy 2 ZS Platinum), it crashes my computer.
    Today, i tried a newer headset, a USB one, and plugged it in. (these headsets are logitech). The microphone works good (while plugged into the card, but then i have like maybe 2.5% volume (very very, very low) in the headphones. I checked my system volume, i changed around EVERY thing to see if i could get the phones to work, but no sound from my voice chat server (Teamspeak) would play at any hearable level. (i know it worked because they yelled and i could hear them, a little).
    So after that all does not work, i plug in my old trusty headset (to the front dri've bay i got with my card) and then i start getting ERRORS and stuff when i open teamspeak, heres the 2 i get:
    "OpenDevice Specified device identifier is out of range", then I hit OK and it gives me: "waveInGetDevCaps Specified device indentifier is out of range".
    I then uninstall my drivers for the sound card, and download these: SBAX_WBUP2_LB_2_09_006
    When I try to install them, it says something like: please make sure your sound card is installed correctly, or something of the nature.
    [Computer Two]
    I install my old Sound Blaster Li've 5. card on my second computer, and i download the drivers for it, and it says the same thing when installing drivers: "make sure its installed correctly," like my Audigy 2 ZS Plat. Thats when it hit me, there has to be something i'm doing wrong here, how it could give me the same error on 2 machines?
    I really have no idea what to make of this, any help is appreciated

    Hello. i've been working on this for the past 5 hours, but i've taken a breath and now i'm going to post here to see if any one can help me out. Im working with 2 computers, heres one:
    [Computer One]
    Yesterday, i first noticed that when i plugged in my microphone (a new one i bought) to the sound card i have (Audigy 2 ZS Platinum), it crashes my computer.
    Today, i tried a newer headset, a USB one, and plugged it in. (these headsets are logitech). The microphone works good (while plugged into the card, but then i have like maybe 2.5% volume (very very, very low) in the headphones. I checked my system volume, i changed around EVERY thing to see if i could get the phones to work, but no sound from my voice chat server (Teamspeak) would play at any hearable level. (i know it worked because they yelled and i could hear them, a little).
    So after that all does not work, i plug in my old trusty headset (to the front dri've bay i got with my card) and then i start getting ERRORS and stuff when i open teamspeak, heres the 2 i get:
    "OpenDevice Specified device identifier is out of range", then I hit OK and it gives me: "waveInGetDevCaps Specified device indentifier is out of range".
    I then uninstall my drivers for the sound card, and download these: SBAX_WBUP2_LB_2_09_006
    When I try to install them, it says something like: please make sure your sound card is installed correctly, or something of the nature.
    [Computer Two]
    I install my old Sound Blaster Li've 5. card on my second computer, and i download the drivers for it, and it says the same thing when installing drivers: "make sure its installed correctly," like my Audigy 2 ZS Plat. Thats when it hit me, there has to be something i'm doing wrong here, how it could give me the same error on 2 machines?
    I really have no idea what to make of this, any help is appreciated

  • Problem vith T61 sound card not regocnized with Windows 7 ultimate

    When I try to Install SoundMax, I get the dreaded "The audio driver files do not support your computer hardware" error
    I have found other threads with Windows XP but haven't found any with Windows 7
    Is there a way to force to install these drivers? or can it be accounted as hardware error?
    Windows itself also does not recognize the sound card in any way.
    All the updates have been performed and absolutely no hint of available sound card. (Except fot the bluetooth external audio controller)

    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73568
    is this the driver that you're trying to install?  does your sound device show up in device manager?  is there a yellow tag on it? if this is the one you're trying to install and it won't did you try to manually update the driver from device manager.  don't let windows find the driver. point the update to the folder where the driver is.
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Audio Science ASI5111 Sound Card not working with Aud. 3 Multi-track

    I am using an Audio Science ASI 5111 Sound Card.  I also used Audi
    tion 3.0.1 on Windows 7.
    The program suddenly freezes when using the ASI driver (not Audition driver) in Multi-track mode.
    At times I get the R6025 error

    Audio Science is aware of the issue.  It has been solved by going back to an older driver.  3.12.07

  • Sound card not recongniz

    Fist I'm french, so sorry for my english! My issue is that everything was as happy as can be on my computer when my Sound card was just no more detected by windows. I have a Augidy 2ZS and has been working fine. Windows keeps saying that there is a new unknow PCI device and don't even recognize if it is an audio device or multimedia device. I unistalled the drivers with a specialized sofware (Driver removal tool) and reinstalled the drivers but won't install saying that it can't find the sound card.
    Then I reinstalled windows. It found the card (was happy then!) but afeter a few reboots( 5~6 reboots)it did the same thing! SO I'm puzzzled!!!
    I suspect that everytime that it's due to a Starforce driver, but I'm not sure. So would like to hear if anyone has had this issue! I think it's when I installed Toca Race Driver 3 it did that but really not sure is it coincidence. I've heard of the issues the Starforce has been raising.
    Thanks to those who will help me!!!

    Wow, I thought I was the only one having this problem, but guess not! About a week ago (~ April 8th, 2006), I turned the computer on and all of a sudden Win XP said, "Multimedia Audio Device Found". When I checked the Hardware Manager, the 394 Firewire Net Adapter built into the SB Audigy Gamer I've got had the yellow exclamation point next to it as well as the Audigy Chipset under Sound, Video, & Game controllers. I have tried EVERYTHING to remedy this problem. I first uninstalled everything according to Creative's instructions for XP removal as well as using Driver Cleaner Pro, and finally reinstalled the drivers, but no luck. Mind you, I've had the Audigy Gamer for about three years now without any problems up until a week ago. I have also tried reinstalling Windows using a Ghost image I created a month ago when the card was working perfectly, but just like the poster above, the card works fine for 3-5 boots, but then I get the same **bleep** "Multimedia Audio Device Found"! ! ! I have also tried moving the card into at least four different slots, cleaned the contacts with a Q-Tip and alcohol, vacuumed the entire MB, etc. I finally just took the Audigy out and I'm temporarily relying on my AC97 built in 6. audio on my MB to get me by until Creative figures out what the h%!l is going on. The worst part is, when the problem is occurring and I try to load the Creative Audio Console, for example, it says that it can't even detect a compatible card in my system. This often happens when I'm trying to install the drivers after the "Multimedia Audio Device" message comes up. I thought my card had gone bad, but I'm beginning to realize this may be a bigger problem than I thought and on a grander scale. Btw, to the poster above, I have never had "Starware" on my PC and it's not installed in Add/Remove programs (I just checked). I don't have Toca 3 either, so I doubt if that's it. Anyone else having this problem, PLEASE POST! ! ! On a closing note, it also seems like the volume properties (double click speaker icon in system tray) reset or don't hold their settoings during this fiasco I'm experiencing as well. . .

  • Sound Card not compatible with WIN 7

    I have a Dell 8200 Dimension Desktop (vintage 2002)?that I?ve just upgraded from XP Pro to Win 7. My Turtle Beach sound card no longer works since it is not compatible with Win 7. When I tried to install a non-Dell sound card, I found that the two sockets were not compatible with the Dell cables. I was told that I must have a Dell card since the plugs were proprietory Dell. I was given a Dell part number (38FRH) which supposedly was the card that would work as a replacement, i.e., be compatible with Windows 7. Dell no longer stocks this card since they stop supporting their computers after they are 5 years old.
    Can?anyone help me solve my problem?

    Which Dell cables? To the speakers? If so, time to change the speakers then.
    Also try online such as eBay. Google for "Dell 38FRH". Ignore the Windows 7 drivers links. First few I found were fakes/scams. Scroll down. On the first page there were a couple of sites that carried it.
    I would rather change the sound card [get something "modern"] and speakers than continue to use proprietary stuff.
    Using Win 7 on an 8 year old system? Yeeesh.

  • Sound Card not working (resolved)

    I've got a new system, and the integrated sound card on it isn't working, so I swiped the PCI sound card from my old computer and inserted it.  And it's not working.  I've pretty much tried every method on the troubleshooting section of ALSA's page on the wiki, without any luck.  And yes, this includes unmuting and setting the volume of the sound channels.
    Last edited by Falcata (2008-02-08 04:07:53)

    I already knew that I had two cards.  I added in the second one because the integrated chip wasn't working.  Anyways, here's the results of lspci -nn:
    00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 04)
    00:01.0 PCI bridge [0604]: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port [8086:2581] (rev 04)
    00:02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 04)
    00:02.1 Display controller [0380]: Intel Corporation 82915G Integrated Graphics Controller [8086:2782] (rev 04)
    00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03)
    00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03)
    00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
    00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
    00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
    00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
    00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03)
    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d3)
    00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
    00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)
    00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03)
    00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller [8086:2651] (rev 03)
    00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03)
    02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01)
    04:00.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01)
    04:02.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
    Last edited by Falcata (2008-02-07 22:55:42)

  • New Help Pls! Sound Card Not Detected

    Hello,
    I decided to re-install windows 7 because it has been a long time since I had a "clean" install. I had my Creative Labs Sound Blaster X-FI Xtreme Gamer installed and it worked fine. But after I re-installed windows 7, the sound card would not be detected.
    Because this happened to me last time I installed windows 7, I wiped my system dri've (C) and re-installed windows. However, this did not fixed the issue because the card is still not detected and it shows yellow in the device manager.
    In my second install, I removed the card before installing windows because I thought it would detect it after the installation but it didn't.
    I have tried installing manually, but it says:
    Creative X-Fi Audio Processor (WMD) not found
    I am really running out of ideas here and I would appreciate it if someone could tell me how to fix this.

    I just tried to move the sound card to another PCI slot, I uninstalled the devices in the media manager, turned off the PC and switched the card. I made sure there was no dust.
    I also disabled onboard audio. When I turned the PC back on the computer tried to install drivers for new devices but failed. I still cannot install my drivers -.-
    If it helps, the card shows as "Multimedia Audio Controller" under "Other Devices"...

  • Other Device/Sound Card not working properly

     My sound card keeps failing. I can restart my computer and it will work fine for a random amount of time. But usually I'll be running youtube or soundcloud and the audio will just stop. The video will stop and no longer play.  I can try video files on my computer and they won't even play on Windows Media Player. I try in VLC and the video will play, but not the audio.  I've tried every driver known to the HP driver update process, I've tried updating the Intel Chip the Bios, everything.  I'm out of options. Can you help? 

    Hi: You need this driver for the unknown device and you may have to manually install it by browsing to the driver folder. http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66231.exe The only suggestion I can offer for the audio is if your model has the Realtek HD audio system, accept the agreement, download and install the second driver on the list. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false

  • HP 6120n Sound won't work bought replacement sound card not sure of what to do

    HP 6120n  - Using win 7  - Sound won't work
    Tried restarting and Troubleshooter and it not not solve the problem
    Bought used replacement sound card (30 day warranty) but not sure of what to do to install it or even if it is necessary

    Hello @4u2bu,
    I understand that the audio is not working on your HP Pavilion a6120n Desktop PC running Windows 7 and you are wondering it you should install the new audio card you purchased. I would recommend that you first try the steps set out in the HP Support document: No Sound from the Speakers or Headphones (Windows 7), which has been designed to address audio issues with computers running Windows 7.
    Now if the above document does not work I would suspect a driver issue and since HP does not have audio drivers for your computer running Windows 7 I would suggest you go ahead and install the new audio card as it will have the needed drivers.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Maybe you are looking for

  • How to highlight the messages in the WDA?

    hi experts,                  Iam new to Webdynpro.i just want to know how to highlight the texts displayed . like BOLD,italic etc and also colors. Regards, murthy.

  • Can one transfer music to itunes from ipod on new computer

    How does one transfer music from ipod to itunes on new computer?

  • Grant access to help desk users to add members to distribution and security groups

    Hello, I am trying to create a set of help desk users that has full access to add or remove members from distribution and security groups as well as update users.  We want it to bypass owner approval and essentially allow this group to add or remove

  • NI::CNiSystemTrayIcon

    Hello Yesterday I tried to add system tray icon to my C++ (MFC, MS Visual Studio 7.1.3088) application. NI::CNiSystemTrayIcon class provides this, so I thought it will be easy. Well, maybe it is, but not for me :-). I found out that even adding the f

  • CMS operation timed out after 9 minutes

    All my queries via either BOE SDK or QueryBuilder now take ages to complete even when they are simple. Is CMS overloaded a cause? a)boe_cmsd is now using about 3GB+ RAM b)Number of Objects in CMS System Cache =39992 c)Number of Objects in CMS System