Sound card not detecting digital cab

I'm having a problem getting the digital out to work on my X-Fi Gamer. I purchased the card and also the breakout box that provides s/pdif i/o via coax and digital through the /8 jack. I connect it via an optical cable to my surround receiver. I've installed all the proper software, etc, and I can get absolutely no sound.
My thought is that the card is not detecting my optical connection. In the "flexijack" options everything is grayed out and I cannot choose digital at all. In speaker set up it has the analog connections marked at plugged in (with cords coming out) and not the flexijack connection. Only the flexijack is plugged in on the card, though. Per other posts on the boards I've made sure no other sound devices are set as default, and my onboard sound is disabled completely. I'm using a creative approved adapter (the digital i/o box) with a working cable, and working receiver. Any help would be really appreciated.
I'm running windows Media Center XP 2005, by the way.

Hey MrE, did you ever get this issue sorted?
I had exactly the same symptoms recently with my new system build, and it ended up being caused by a conflict with my video card. When I booted the system using the motherboards onboard video, my ice1712 card would then be detected by ALSA and worked as it should.
I ended up moving my video card to the 2nd / bottom PCI-E on my motherboard and this got around the issue

Similar Messages

New Help Pls! Sound Card Not Detected

Hello,
I decided to re-install windows 7 because it has been a long time since I had a "clean" install. I had my Creative Labs Sound Blaster X-FI Xtreme Gamer installed and it worked fine. But after I re-installed windows 7, the sound card would not be detected.
Because this happened to me last time I installed windows 7, I wiped my system dri've (C) and re-installed windows. However, this did not fixed the issue because the card is still not detected and it shows yellow in the device manager.
In my second install, I removed the card before installing windows because I thought it would detect it after the installation but it didn't.
I have tried installing manually, but it says:
Creative X-Fi Audio Processor (WMD) not found
I am really running out of ideas here and I would appreciate it if someone could tell me how to fix this.

I just tried to move the sound card to another PCI slot, I uninstalled the devices in the media manager, turned off the PC and switched the card. I made sure there was no dust.
I also disabled onboard audio. When I turned the PC back on the computer tried to install drivers for new devices but failed. I still cannot install my drivers -.-
If it helps, the card shows as "Multimedia Audio Controller" under "Other Devices"...

Lenovo T500 Sound Card not detected

Hey All,
I'm having trouble with lenovo sound drivers since I just did a fresh install of windows 7 onto my T500. The audio worked before this reinstall and as soon as i did it, the sound stopped.
The issue seems to be that there is no audio device at all in device manager, there is also no question mark, other devices either. There is also a no audio output device pop up when i mouse over the speaker at the bottom of the taskbar. I have tried running the windows 7 audio driver from the lenovo website, at first it didn't work and gave a could not find a MEDIA device error but by putting all the files in one folder it did run but there was no devices in the selection box and it seemd to have no effect.
I have tried updating all lenovo updates and all windows updates with multiple fresh installs. Everything i have done i have done as an admin and regardless i am completely unable to get an kind of audio device installed.
Any help or ideas would be greatly appreciated.
Thanks,
Jared
Solved!
Go to Solution.

Hi and welcome to the forum Jared!
Try putting BIOS settings to default.
Also, try to boot from a LiveCD of any popular linux distro like Ubuntu, LInux etc. If you also don't get sound in linux, then this is probably hardware problem.
Keep us posted.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".

How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".

There is no way any fellow user here can know anything specific about your repair status. You will need to call Apple and ask them yourself.

Audio / Sound Card not working after Soundblaster.USB.Audio.Support.pkg

Ok, first - confess - it was stupid. I installed the Soundblaster.USB.Audio.Support.pkg package, which i downloaded from the internet, to make the harman Kardon Soundsticks (USB-Version) working, as nothing happened when plugging them in.
First, it ruined the mouse working after reboot and also disabled the internal sound card, not even as device available anymore. I fixed the mouse problem by installing IOUSBFamily-281.4.0-log(PPC).dmg
How can I make the sound card be available and working again ? I also updated to 10.4.11. Did not help ! Can you ? Thanks !

Welcome to the Apple discussions.
First, look in system preferences, accounts, and for your login account look at login items to see if there is a Soundblaster USB module that is loaded when you reboot your system. Delete it if there is one.
If you updated to 10.4.11 by software update, download the combo update from http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html . The combo update is a complete update for all updates to 10.4, and installing the combo sometimes fixes odd things.

Z30, sim card not detected

My Z30 just few months old, sim card not detect, can someone help? thanks a lot..

Hello,
Have you tested the SIM in another device? Have you tested another known-good SIM in this device? Is there an error message? Has it ever worked?
Let us know.

Sound Blaster Live 24-bit PCI Sound Card and Creative Sound Blaster PCI Card not detect

Ok here is my problem. I bought a Creative Sound Blaster PCI sound card a while back and it was working fine but recently when I would boot up my computer and try to play music say off of Winamp it says Bad DirectSound Driver. When I check device manager it shows no sound card there and in sounds and audio devices it says no audio device. Now my brother believed this to be a card fault so we went to Frys and bought a Sound Blaster Li've 24-bit PCI card. I uninstalled the old drivers and installed this new one but yet it's the same problem. My assumption was that Windows XP had something conflicting so I reinstalled the OS. It found the card and I installed the latest drivers?off of this site but now it does the same thing yet again with a fresh install of Windows XP. The card has been in all 3 of my PCI slots and it will detect it for a moment but then acts like as if the card was never installed. Like I never installed a sound card into the computer. The onboard audio has been disabled for a while now but I do not know what the problem could be. I did Scan for hardware changes but it doesn't show up. Sometimes when the card is detected if I do scan for hardware changes and the card is there it will just magically disappear from the device manager as if it was never there. Even when I try to load music and I see the card is detected it will not play the music and ends up locking up Winamp to the point that sometimes will go BSOD. Now I would really like to find out what the issue is because I am planning this weekend to swap out my motherboard with a duplicate board to see if that will end up fixing the problem but I want to find out if there is any other way to fix this issue. Thank you.Message Edited by AuXoIs on 02-25-200808:28 PM

Hmm what other options is there for the bios on PCI slots?Also anything you connect to the motherboard can have oxidization (I think its that) build up on the connection. Check the connector on the card and get a eraser (Pen eraser is better) and give it a good cleaning. The connector might have alot of build-up on it and you can see it by a dark yellowy colour. I cleaned my graphics card and ram connectors after they got alot of the build-up on them. On a older computer my graphics stopped working and this fixed it. Also I went away for a while (like a month) and came back to see that my puter didn't display anything. Opened it up and saw that the graphic card had alot of corrosion? on the card connector and in the slot. Does that if you computer is turned of for a long time. Had a heck of time trying to clean the slot out. One other thing that it could be is the sound card is faulty. I had an audigy 2 and it died a while back . It picks it up and then try and use it computer freezes and the after restart it's not there anymore. Hope it's not that problem. Hope this gives you something to go by.

Sound card not recongniz

Fist I'm french, so sorry for my english! My issue is that everything was as happy as can be on my computer when my Sound card was just no more detected by windows. I have a Augidy 2ZS and has been working fine. Windows keeps saying that there is a new unknow PCI device and don't even recognize if it is an audio device or multimedia device. I unistalled the drivers with a specialized sofware (Driver removal tool) and reinstalled the drivers but won't install saying that it can't find the sound card.
Then I reinstalled windows. It found the card (was happy then!) but afeter a few reboots( 5~6 reboots)it did the same thing! SO I'm puzzzled!!!
I suspect that everytime that it's due to a Starforce driver, but I'm not sure. So would like to hear if anyone has had this issue! I think it's when I installed Toca Race Driver 3 it did that but really not sure is it coincidence. I've heard of the issues the Starforce has been raising.
Thanks to those who will help me!!!

Wow, I thought I was the only one having this problem, but guess not! About a week ago (~ April 8th, 2006), I turned the computer on and all of a sudden Win XP said, "Multimedia Audio Device Found". When I checked the Hardware Manager, the 394 Firewire Net Adapter built into the SB Audigy Gamer I've got had the yellow exclamation point next to it as well as the Audigy Chipset under Sound, Video, & Game controllers. I have tried EVERYTHING to remedy this problem. I first uninstalled everything according to Creative's instructions for XP removal as well as using Driver Cleaner Pro, and finally reinstalled the drivers, but no luck. Mind you, I've had the Audigy Gamer for about three years now without any problems up until a week ago. I have also tried reinstalling Windows using a Ghost image I created a month ago when the card was working perfectly, but just like the poster above, the card works fine for 3-5 boots, but then I get the same **bleep** "Multimedia Audio Device Found"! ! ! I have also tried moving the card into at least four different slots, cleaned the contacts with a Q-Tip and alcohol, vacuumed the entire MB, etc. I finally just took the Audigy out and I'm temporarily relying on my AC97 built in 6. audio on my MB to get me by until Creative figures out what the h%!l is going on. The worst part is, when the problem is occurring and I try to load the Creative Audio Console, for example, it says that it can't even detect a compatible card in my system. This often happens when I'm trying to install the drivers after the "Multimedia Audio Device" message comes up. I thought my card had gone bad, but I'm beginning to realize this may be a bigger problem than I thought and on a grander scale. Btw, to the poster above, I have never had "Starware" on my PC and it's not installed in Add/Remove programs (I just checked). I don't have Toca 3 either, so I doubt if that's it. Anyone else having this problem, PLEASE POST! ! ! On a closing note, it also seems like the volume properties (double click speaker icon in system tray) reset or don't hold their settoings during this fiasco I'm experiencing as well. . .

Bootcamp Problems - Sound Device Not Detected

I have installed Windows Bootcamp on my Imac8 and everything seems to work perfectly except for the sound. I do not know why it is not working because I have installed Windows XP with Service Pack 3 upgrade and I used the Mac OS X Install Disk 1, which came with my computer to install all the necessary drivers. The sound used to work perfectly a few days ago and I don't know what's wrong.
This is the second time I've partitioned my drive (after transferring and wiping out my first partitioned drive) and the first time I partitioned my drive, the sound worked decently. I've ran the Mac OS X Install Disc 1 over 5 or 6 times and when I install the drivers, the setup installs the Realtek and IDT SigmaTel Drivers. After that didn't give me any sound bar or allow Bootcamp to detect my sound card, I tried installing the RealTek and SigmaTel Drivers separately by opening the Mac OS X Install Disc 1 to browse the different setups and still, nothing. Sound works on the Mac side, but the Windows side is severely lacking. Someone please help me!!

Nevermind, I found out the solution and now my sound works! If anyone has problems with the SP3 on the XP Bootcamp, goto: http://www.techarp.com/showarticle.aspx?artno=490 and follow the instructions. Victory!

Sound card not detec

hello i have a problem , i am trying to use 2 sound cards on my system? . audegy 2 platinum and the second is the on board? sound crad? ... the problem is that even though i enable the onboard sound card from bios still its not detected by the machine unless i remove completely the audegy from the pci?any solution on how 2 run both of the cards at the same time ??NB : i also have a sound blaster li've platinum? card? ... it was also not detected when i pluged it in the pci slot....

I'm having the same problem too.
Sometimes I can get it to work - but that's more luck than anything else. Xmusic was working today until
I decided to install the latest Nvidia driver - that was the end of it and for the past 3 hours I have tried
all the usual remedial methods:
- Have checked that the device is not sharing - confirmed both during POST and with DevManager!
- Removed card and changed slots
- removed drivers, reinstalled, tried all 3
- cleared CMOS[removal of battery]
System Details
A8N-E bios rev 03
AMDX2 4400
4GB RAM DDR2 Dual
Asus 7800GTX 52
XP64
X-FI Extreme[frustration]
Some other info.
About 2 nights ago the same thing happened - couldn't get X-FI to work. Did the same stuff as above
and eventually gave up. Turned the machine on the next night and there is was like it had never gone
south .. Then I stupidly decided to install those latest NV drivers...
CJ
Message Edited by CrazyJak on 06-06-2006 0:44 PM

PCMCIA Realtek Ethernet card not detected

Hi, I'm trying to use a PCMCIA Etherner Card with Realtek chip.
If the card it's already plugged when booting, Udev takes 180000 ms to finish and the card doesn't work. If it's plugged while booted, dmesg shows that there's a "something" at SmartCardBus but, again, card doesn't get recognized.
"Ifconfig -a" shows nothing, and I know the card works 'cause I've tryed with an Ubuntu cd and the cards works perfect. I've looked for the modules, and 8139too & 8139cp where loaded, wich I've tryed in arch and still doesn't work, It also detects the same hardware with lspci (Arch detects the Cardbus but not the realtek card, Ubuntu detects both) and lspcmcia.
Ubuntu is using kernel 2.6.27-7 and Arch 2.6.28.
hwd -e:
1217:7113 CardBus bridge: 02 Micro, Inc. module:yanta_cardbus
OZ711EC1 SmartCardBus Controller
lspmcia:
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:02:01.0)
CardBus card -- see "lspci" for more information
Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:02:01.1)
Socket 1 Device 0: [-- no driver --] (bus ID: 1.0)
lspci:
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 [Mobility FireGL 9000] (rev 02)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev ff)
02:01.0 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
02:01.1 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
02:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
dmesg:
int3: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:02:03.0/class
Modules linked in: usb_storage joydev ppdev iTCO_wdt iTCO_vendor_support ehci_hcd psmouse uhci_hcd parport_pc lp serio_raw usbcore shpchp pci_hotplug sg video output parport pcspkr ppp_generic intel_agp agpgart pcmcia dcdbas thermal evdev fan button battery ac acpi_cpufreq freq_table processor snd_intel8x0m snd_seq_oss snd_intel8x0 snd_seq_midi_event snd_seq snd_seq_device snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ipw2200 ieee80211 ieee80211_crypt tg3 libphy slhc rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sr_mod cdrom yenta_socket rsrc_nonstatic pcmcia_core sd_mod ata_piix ata_generic pata_acpi libata scsi_mod
Pid: 435, comm: pccardd Not tainted (2.6.28-ARCH #1) Inspiron 600m
EIP: 0060:[<c044dce0>] EFLAGS: 00000246 CPU: 0
EIP is at quirk_h12y_1_mmio+0x1/0x26
EAX: de4fc800 EBX: c03cbdc0 ECX: de4fc840 EDX: de4fc800
ESI: c03cc110 EDI: de4fc800 EBP: df8ae400 ESP: df1b9ef4
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process pccardd (pid: 435, ti=df1b8000 task=df1ba000 task.ti=df1b8000)
Stack:
c02192c3 de4fc800 df8ae400 de4fc800 c0216a59 00000200 00000000 c031c93c
de4fc826 c03b3d25 00000000 00000003 00000000 00000000 00000001 df8ae420
de4fc858 00000200 813910ec 00ffffed 00000000 00000000 00000000 df8ae400
Call Trace:
[<c02192c3>] pci_fixup_device+0x63/0xc0
[<c0216a59>] pci_device_add+0x69/0xb0
[<c031c93c>] pci_scan_single_device+0x35c/0x4f0
[<c0216ac3>] pci_scan_slot+0x23/0x80
[<e0bd850f>] cb_alloc+0x1f/0xd4 [pcmcia_core]
[<e0bd4854>] socket_insert+0x124/0x140 [pcmcia_core]
[<e0bd5202>] pccardd+0x202/0x290 [pcmcia_core]
[<e0bd5000>] pccardd+0x0/0x290 [pcmcia_core]
[<c01440f9>] kthread+0x39/0x70
[<c01440c0>] kthread+0x0/0x70
[<c0104d33>] kernel_thread_helper+0x7/0x14
Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc <cc> cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
EIP: [<c044dce0>] quirk_h12y_1_mmio+0x1/0x26 SS:ESP 0068:df1b9ef4
---[ end trace 6fe320c81d500dc7 ]---
note: pccardd[435] exited with preempt_count 1
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.29.0 20080528 on minor 0
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
pci 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 2 usecs
rc.conf:
MODULES=(slhc tg3 ipw2200 ac97_bus snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-ac97-codec snd-intel8x0 snd-intel8x0m soundcore acpi-cpufreq)
DAEMONS=(syslog-ng network netfs dbus hal !crond cpufreq fam avahi-daemon pcmcia)
I've tryed loading: 8139too 8139cp pcmcia_core pcmcia yenta_socket rsrc_nonstatic
The bradcom is the original eth port wich I'm replacing because stop working long time ago (And I also tryed disabling it from BIOS, and it's the same).
I'm mising something that I should load or run? I've googled a lot, but people just plug the card and that's all :-P. Any idea would be welcomed :-).
EDIT: Fix title (PMCIA*)
Last edited by el_zoona (2009-01-22 07:25:00)

Nevermind...It's Kernel 2.6.28...I'm a lucky guy, eh? :-(
Booted into Arch Overlod cd and a simple lspci show my shiny new card...Now i'm going to erase my hole system (it was new anyway) and check if a Suy breaks the drivers again. In that case, i should file a bug somewhere, right?

[SOLVED] Sound Card not recognized on Macbook (5,1)

Hello,
I had no problems installing Archlinux on my Macbook (5,1). In fact, the first time I followed the Wiki's instructions for installing ALSA, I could play sounds just fine. However, ever since my first restart, the ALSA daemon complains that I have no sound cards installed. lspci shows that it sees an audio device, but /sys/modules/snd no longer exists. I do not know much about useful diagnostic information for this situation, so please let me know what else could be of use.
Thank you,
Rob
Last edited by rennis250 (2009-07-28 20:58:00)

I had forgotten that I installed OSS, which caused conflicts with a previously installed copy of ALSA. Once I removed OSS completely, rebooted, and went through the ALSA setup again, I had fully working sound. This problem can be marked as solved.
--Rob

[SOLVED] Sound card not recognized

I tried following the ALSA setup guide on the Wiki to get my sound working but I don't think Arch recognizes my sound card. I found out from lshwd that the module is snd-intel8x0 so I modprobed that and snd-pcm-oss, changed the values in alsamixer, added myself to the audio group, installed alsa-utils, alsa-lib and alsa-oss and restarted everything but I still have no sound. Here's some output:
lsmod | grep '^snd'
snd_intel8x0 28700 1
snd_ac97_codec 95780 1 snd_intel8x0
snd_pcm_oss 38688 0
snd_pcm 69124 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_device 6796 0
snd_mixer_oss 14592 1 snd_pcm_oss
snd_timer 19076 1 snd_pcm
snd 44516 9 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_seq_device,snd_mixer_oss,snd_timer
snd_page_alloc 7816 2 snd_intel8x0,snd_pcm
ls -l /dev/snd
total 0
crw-rw---- 1 root audio 116, 0 2007-07-12 21:35 controlC0
crw-rw---- 1 root audio 116, 24 2007-07-12 21:35 pcmC0D0c
crw-rw---- 1 root audio 116, 16 2007-07-12 21:35 pcmC0D0p
crw-rw---- 1 root audio 116, 25 2007-07-12 21:35 pcmC0D1c
crw-rw---- 1 root audio 116, 26 2007-07-12 21:35 pcmC0D2c
crw-rw---- 1 root audio 116, 27 2007-07-12 21:35 pcmC0D3c
crw-rw---- 1 root audio 116, 20 2007-07-12 21:35 pcmC0D4p
crw-rw---- 1 root audio 116, 33 2007-07-12 13:02 timer
The wiki says that if you have controlC0 and pcmC0D0p in that output then the modules have been loaded properly and they are both there so I'm not sure where to go from here. Your help would be appreciated.
Last edited by Thrillhouse (2007-07-12 22:23:29)

you need to start alsa if you haven't already done so... /etc/alsa start
prolly better to run alsacoconf if you still have problems

Cirrus Logic sound card not working - Just a quick question (iMac 27-inch)

Hi, so as many have experienced, my sound card is not registering on my new iMac, on the Windows Vista side. I get sound out of the Mac side, just nothing from Windows.
I was wondering, would a USB sound card or sound pod solve the problem? I am not amazing with computers... But would buying one of those be a possibility?
I was looking at something like this...
http://www.emicrophones.com/p-1230-andrea-pure-audio-usb-sa-full-duplex-usb-soun d-pod.aspx
If anyone who knows what they're talking about could give me some input on this, it would be greatly appreciated. I do a lot of video editing on the Windows side, so having no sound would be an extreme burden.

Hi - I had this problem when I installed WIndows Vista (32 bit) on my i5 iMac. I believe I resolved the problems by finding the drivers on the OSX install disk. What I am struggling with is updating the video drivers - but that is another story...
Steve

Sound card not working anymo

Hello. i've been working on this for the past 5 hours, but i've taken a breath and now i'm going to post here to see if any one can help me out. Im working with 2 computers, heres one:
[Computer One]
Yesterday, i first noticed that when i plugged in my microphone (a new one i bought) to the sound card i have (Audigy 2 ZS Platinum), it crashes my computer.
Today, i tried a newer headset, a USB one, and plugged it in. (these headsets are logitech). The microphone works good (while plugged into the card, but then i have like maybe 2.5% volume (very very, very low) in the headphones. I checked my system volume, i changed around EVERY thing to see if i could get the phones to work, but no sound from my voice chat server (Teamspeak) would play at any hearable level. (i know it worked because they yelled and i could hear them, a little).
So after that all does not work, i plug in my old trusty headset (to the front dri've bay i got with my card) and then i start getting ERRORS and stuff when i open teamspeak, heres the 2 i get:
"OpenDevice Specified device identifier is out of range", then I hit OK and it gives me: "waveInGetDevCaps Specified device indentifier is out of range".
I then uninstall my drivers for the sound card, and download these: SBAX_WBUP2_LB_2_09_006
When I try to install them, it says something like: please make sure your sound card is installed correctly, or something of the nature.
[Computer Two]
I install my old Sound Blaster Li've 5. card on my second computer, and i download the drivers for it, and it says the same thing when installing drivers: "make sure its installed correctly," like my Audigy 2 ZS Plat. Thats when it hit me, there has to be something i'm doing wrong here, how it could give me the same error on 2 machines?
I really have no idea what to make of this, any help is appreciated

Hello. i've been working on this for the past 5 hours, but i've taken a breath and now i'm going to post here to see if any one can help me out. Im working with 2 computers, heres one:
[Computer One]
Yesterday, i first noticed that when i plugged in my microphone (a new one i bought) to the sound card i have (Audigy 2 ZS Platinum), it crashes my computer.
Today, i tried a newer headset, a USB one, and plugged it in. (these headsets are logitech). The microphone works good (while plugged into the card, but then i have like maybe 2.5% volume (very very, very low) in the headphones. I checked my system volume, i changed around EVERY thing to see if i could get the phones to work, but no sound from my voice chat server (Teamspeak) would play at any hearable level. (i know it worked because they yelled and i could hear them, a little).
So after that all does not work, i plug in my old trusty headset (to the front dri've bay i got with my card) and then i start getting ERRORS and stuff when i open teamspeak, heres the 2 i get:
"OpenDevice Specified device identifier is out of range", then I hit OK and it gives me: "waveInGetDevCaps Specified device indentifier is out of range".
I then uninstall my drivers for the sound card, and download these: SBAX_WBUP2_LB_2_09_006
When I try to install them, it says something like: please make sure your sound card is installed correctly, or something of the nature.
[Computer Two]
I install my old Sound Blaster Li've 5. card on my second computer, and i download the drivers for it, and it says the same thing when installing drivers: "make sure its installed correctly," like my Audigy 2 ZS Plat. Thats when it hit me, there has to be something i'm doing wrong here, how it could give me the same error on 2 machines?
I really have no idea what to make of this, any help is appreciated

Sound card not detecting digital cab

Similar Messages

Maybe you are looking for