Sound Card not working (resolved)

I've got a new system, and the integrated sound card on it isn't working, so I swiped the PCI sound card from my old computer and inserted it.  And it's not working.  I've pretty much tried every method on the troubleshooting section of ALSA's page on the wiki, without any luck.  And yes, this includes unmuting and setting the volume of the sound channels.
Last edited by Falcata (2008-02-08 04:07:53)

I already knew that I had two cards.  I added in the second one because the integrated chip wasn't working.  Anyways, here's the results of lspci -nn:
00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 04)
00:01.0 PCI bridge [0604]: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port [8086:2581] (rev 04)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 04)
00:02.1 Display controller [0380]: Intel Corporation 82915G Integrated Graphics Controller [8086:2782] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d3)
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03)
00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller [8086:2651] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03)
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01)
04:00.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01)
04:02.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
Last edited by Falcata (2008-02-07 22:55:42)

Similar Messages

  • Audio / Sound Card not working after Soundblaster.USB.Audio.Support.pkg

    Ok, first - confess - it was stupid. I installed the Soundblaster.USB.Audio.Support.pkg package, which i downloaded from the internet, to make the harman Kardon Soundsticks (USB-Version) working, as nothing happened when plugging them in.
    First, it ruined the mouse working after reboot and also disabled the internal sound card, not even as device available anymore. I fixed the mouse problem by installing IOUSBFamily-281.4.0-log(PPC).dmg
    How can I make the sound card be available and working again ? I also updated to 10.4.11. Did not help ! Can you ? Thanks !

    Welcome to the Apple discussions.
    First, look in system preferences, accounts, and for your login account look at login items to see if there is a Soundblaster USB module that is loaded when you reboot your system. Delete it if there is one.
    If you updated to 10.4.11 by software update, download the combo update from http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html . The combo update is a complete update for all updates to 10.4, and installing the combo sometimes fixes odd things.

  • Cirrus Logic sound card not working - Just a quick question (iMac 27-inch)

    Hi, so as many have experienced, my sound card is not registering on my new iMac, on the Windows Vista side. I get sound out of the Mac side, just nothing from Windows.
    I was wondering, would a USB sound card or sound pod solve the problem? I am not amazing with computers... But would buying one of those be a possibility?
    I was looking at something like this...
    http://www.emicrophones.com/p-1230-andrea-pure-audio-usb-sa-full-duplex-usb-soun d-pod.aspx
    If anyone who knows what they're talking about could give me some input on this, it would be greatly appreciated. I do a lot of video editing on the Windows side, so having no sound would be an extreme burden.

    Hi - I had this problem when I installed WIndows Vista (32 bit) on my i5 iMac. I believe I resolved the problems by finding the drivers on the OSX install disk. What I am struggling with is updating the video drivers - but that is another story...
    Steve

  • Sound card not working anymo

    Hello. i've been working on this for the past 5 hours, but i've taken a breath and now i'm going to post here to see if any one can help me out. Im working with 2 computers, heres one:
    [Computer One]
    Yesterday, i first noticed that when i plugged in my microphone (a new one i bought) to the sound card i have (Audigy 2 ZS Platinum), it crashes my computer.
    Today, i tried a newer headset, a USB one, and plugged it in. (these headsets are logitech). The microphone works good (while plugged into the card, but then i have like maybe 2.5% volume (very very, very low) in the headphones. I checked my system volume, i changed around EVERY thing to see if i could get the phones to work, but no sound from my voice chat server (Teamspeak) would play at any hearable level. (i know it worked because they yelled and i could hear them, a little).
    So after that all does not work, i plug in my old trusty headset (to the front dri've bay i got with my card) and then i start getting ERRORS and stuff when i open teamspeak, heres the 2 i get:
    "OpenDevice Specified device identifier is out of range", then I hit OK and it gives me: "waveInGetDevCaps Specified device indentifier is out of range".
    I then uninstall my drivers for the sound card, and download these: SBAX_WBUP2_LB_2_09_006
    When I try to install them, it says something like: please make sure your sound card is installed correctly, or something of the nature.
    [Computer Two]
    I install my old Sound Blaster Li've 5. card on my second computer, and i download the drivers for it, and it says the same thing when installing drivers: "make sure its installed correctly," like my Audigy 2 ZS Plat. Thats when it hit me, there has to be something i'm doing wrong here, how it could give me the same error on 2 machines?
    I really have no idea what to make of this, any help is appreciated

    Hello. i've been working on this for the past 5 hours, but i've taken a breath and now i'm going to post here to see if any one can help me out. Im working with 2 computers, heres one:
    [Computer One]
    Yesterday, i first noticed that when i plugged in my microphone (a new one i bought) to the sound card i have (Audigy 2 ZS Platinum), it crashes my computer.
    Today, i tried a newer headset, a USB one, and plugged it in. (these headsets are logitech). The microphone works good (while plugged into the card, but then i have like maybe 2.5% volume (very very, very low) in the headphones. I checked my system volume, i changed around EVERY thing to see if i could get the phones to work, but no sound from my voice chat server (Teamspeak) would play at any hearable level. (i know it worked because they yelled and i could hear them, a little).
    So after that all does not work, i plug in my old trusty headset (to the front dri've bay i got with my card) and then i start getting ERRORS and stuff when i open teamspeak, heres the 2 i get:
    "OpenDevice Specified device identifier is out of range", then I hit OK and it gives me: "waveInGetDevCaps Specified device indentifier is out of range".
    I then uninstall my drivers for the sound card, and download these: SBAX_WBUP2_LB_2_09_006
    When I try to install them, it says something like: please make sure your sound card is installed correctly, or something of the nature.
    [Computer Two]
    I install my old Sound Blaster Li've 5. card on my second computer, and i download the drivers for it, and it says the same thing when installing drivers: "make sure its installed correctly," like my Audigy 2 ZS Plat. Thats when it hit me, there has to be something i'm doing wrong here, how it could give me the same error on 2 machines?
    I really have no idea what to make of this, any help is appreciated

  • Other Device/Sound Card not working properly

     My sound card keeps failing. I can restart my computer and it will work fine for a random amount of time. But usually I'll be running youtube or soundcloud and the audio will just stop. The video will stop and no longer play.  I can try video files on my computer and they won't even play on Windows Media Player. I try in VLC and the video will play, but not the audio.  I've tried every driver known to the HP driver update process, I've tried updating the Intel Chip the Bios, everything.  I'm out of options. Can you help? 

    Hi: You need this driver for the unknown device and you may have to manually install it by browsing to the driver folder. http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66231.exe The only suggestion I can offer for the audio is if your model has the Realtek HD audio system, accept the agreement, download and install the second driver on the list. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false

  • Audio Science ASI5111 Sound Card not working with Aud. 3 Multi-track

    I am using an Audio Science ASI 5111 Sound Card.  I also used Audi
    tion 3.0.1 on Windows 7.
    The program suddenly freezes when using the ASI driver (not Audition driver) in Multi-track mode.
    At times I get the R6025 error

    Audio Science is aware of the issue.  It has been solved by going back to an older driver.  3.12.07

  • SB04100 Sound Blaster Card not working after computer rebuild

    =SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
    Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
    Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

    Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
    Everything works for now -- I'll be glad to get this particular computer out of my house !

  • Mb sound not working. Can i add a sound card to work with PP cs6?

    I have a sabertooth x58, pc, win 7. I lost the audio monitoring all of a sudden. Also tryed windows media player & all windows sounds are not being played as well.  Tryed absolutely everything. Need to go to plan B.
    Can i add a  sound card to work with PP cs6?
    http://www.newegg.com/Product/Product.aspx?Item=N82E16829132052

    >Tryed absolutely everything
    What does that mean?
    Have you removed the sound card driver via control panel and let Win7 reinstall?

  • Runtime error R6025 message after log on to Vista - Flash Card not working

    Hi
    I'm a newbie & would appreciate any advice.
    I am getting a runtime error message R6025 when I log on to Windows Vista.
    When I click out of the box I then get a message saying Toshiba Flash Card not working.
    I cancel that and my laptop is ok except I don't know if the flashcard is working or not because I don't know what it does.
    Sorry if I sound thick
    Thanks
    Neelie

    Hi
    I found this MS knowledge base article:
    +Description of the R6025 run-time error in Visual C++\+
    http://support.microsoft.com/kb/125749
    But I doubt this description would be useful for you or anyone here. It describes this error in Visual C++ and this is programming language.
    However, I think you should simply reinstall the Value Added Package which you could download firstly from the Toshiba European page.
    At first you have to remove the old Value Added Package from the system, then reboot the notebook and follow with new VAP installation.
    Bye

  • Alerts sounds are not working after upgrading to iOS 7.1.2

    Hi,
    I've noticed that all the alerts sounds are not working anymore after upgrading my iPhone 4S to iOS 7.1.2
    I’ve reviewed similar posts regarding the same issue; and it seems this is a common issue in iPhone 4S when upgrade to iOS 7.1.2.
    Apple, please Advise if there anything I can do to resolve the issue especially that my work deepens on the push emails and alerts that requires prompt response.

    I got this issue resolved.
    It caused due to some dirt in the charger slot; such dirt caused the phone to assume as if it is connected to a car kit and that is why it does not produce any sound except the Ringer and the Alarm.
    It has been fixed by cleaning the charger slot by toothbrush! with some
    drops of a cleaner.
    Do not do it by yourself, as it might be a risk; rather, let it to be done by an expert.

  • [SOLVED] Sound (snd_hda_intel) not working after resume from suspend

    Using the latest kernel 2.6.30.4, On HP2133, whenever I get back from resume, sound is not working.
    Running the following brings back the sound, but that is obviously a hack:
    fuser -k /dev/snd/*
    rmmod snd_hda_intel
    modprobe snd_hda_intel
    /etc/rc.d/alsa start
    I have on my /etc/modprobe/50-sound.conf:
    options snd-hda-intel model=laptop
    alias snd-card-0 snd-hda-intel
    alias sound-slot-0 snd-hda-intel
    Here's the exact hardware specification:
    # lspci -nnv|grep Audio
    80:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
    Any idea where to look for this?
    Last edited by yhager (2009-08-21 16:54:00)

    [SOLVED]
    I downgraded to kernel 2.6.29 and the problem is gone.
    Note: I also had X VT problems with 2.6.30.4 (xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call). Those were solved too by downgrading to 2.6.29.

  • Sound blaster not working correctly?

    Sound blaster not working correctly #I have a 64 bit, windows vista system.
    A Logitech Z-5500 Digital speaker system (one woofer, center speaker, left, right, rear right, left rear speakers, and a seperate control head).
    I have an X-fi gamer sound card.
    I recently formatted my hard dri've and reinstalled everything. Trying to make everything happy again. Here is my problem:
    When I use the Creative Console Launcher (CCL), my front right speaker tests fine. My front left speaker comes out of the woofer. And no other speakers will test at all. It does this in all modes (2., 4., 5. and 7.).
    When I play some music, it is coming out of all of the speakers. But it won't test properly in the CCL. So, do I have an issue, does what the CCL is doing not matter, or something else In some games, hearing what direction stuff is coming from matters, so if it is sending sounds to the wrong speakers, then I need to figure out a fix.....hence my post.
    Thanks for any help you can give, Robert

    Well, as the official documatation states, the Archlinux is for more or less advanced users, and if you're not one, we will make you one
    First of all, if you compiled your sound as modules, try putting this in your rc.local:
    stat_busy "Activating Sound"
    /sbin/modprobe your_sound_module
    /sbin/modprobe other_sound_module
    /sbin/modprobe yet_other_sound_module
    stat_done
    Change your_sound_module stuff to your module names as you configured in the kernel, of course.
    Second: in order to have two or more sound apps working at the same time, you need some kind of sound server. For default one (esd), uncomment esd in /etc/rc.local (remove ! before it) . After that, you'll have to configure your sound apps to use esd. I know that this is extremely easy with xmms and xine, dunno about others. I do not use esd, because my favorite games (quake3 and half-life) require direct access to /dev/dsp.
    And remember: nobody blames for asking 8)

  • I don't know why my sound is not working

    all of a sudden my sound is not working

    @Katmar,
    What is the product number?
    Go to device manager and expand the sound category.  Is the sound card listed with an error?  If it has an error, open the device and let me know the status message.
    If it is a recent issue, have you tried a system restore?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • My macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

    my macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

    Hi eleni_georgia,
    Welcome to Apple Support Communities.
    The article linked below provides some additional tips that will help you resolve the audio issue that you described.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/TS1574
    Cheers!
    -Jason

  • HT4946 My sound is not working for Siri, voice mail, Itunes,and ringer tones... the only sound that works is the buzzer. I was told at Verizin to try and update my I tune app off my Home computer and that might make the sound , will this help or is the sp

    Sound is not working for Siri, voice mail, ringer tones, movies or music. I was told by verizon that the speaker maybe out, but that i might want to try and reload or update my itunes by plgging into my home computer... will this help and if so how do I do this?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

Maybe you are looking for