Sound Card Volume Too Low in Windows XP

Hello,
I have installed windows xp sp2 with bootcamp and everything is working perfect.
the only problem is that - my sound card volume is low and when i restart in MacOS the sound card volume is super cool.
what shall i do ? in windows xp i can see "Cirrus Logic HD Audio" driver for sound.
anyone can help me ?

Have you done a search for ""XP sound problems"" yet?
Here's a link to one of them:
http://discussions.apple.com/thread.jspa?threadID=2037093&tstart=0&messageID=130 67584#13067584
Look through ALL the pages and see if one of them will work for you. There is a link to another place that may have some drivers that MAY work in the page that is linked above.
Hope it helps...

Similar Messages

  • Portege R500 audio problem: sound volume too low

    The sound volume on my R500 is ridiculously low. Only with volume maxed out (100) and using headphones do I hear anything at all, and even then it's way too low to be useful. I can just make out the test sounds in the left and then right earphone when using the test sound found at Control Panel -> Sound -> Speakers (there are no Headphones to be selected) -> Properties -> Advanced -> Test. Unplugging the headphones I hear nothing from the speakers, due to the (very low) sounds made by the fan and HDD. Playing music (with headphones) I can just make out that sounds are being produced, but I can't even make out what is playing.
    I've tested the things mentioned in the "Satellite 5105-S901 Sound is very low (even on max volume) using supplied Toshiba driver" thread with no success (including Loudness Equalization).
    I'm running Vista Business 32bit, and have tried the driver_audio_realtek26117B.exe, driver_audio_realtek_TC00157600B.exe, and Vista_Win7_R243_x86.exe driver files, and also used the  util_mute_off_25847B.exe utility.
    Enabling mute makes the already faint sounds go completely silent, so I don't think it's a mute issue.
    Jack detection does work, I can see that in the Realtek HD Audio Manager program. Using that program's sound test (Speaker Configuration) I have to go to a completely silent room, and even then I only hear something in the right earphone. (I think; it's so darn low I could be imagining I hear it.)
    Does anyone have any ideas what I can try next? I can boot to XP or Linux if anyone has any ideas on how to get sound there, just to get started. (They're silent as well, I haven't done as extensive testing under those as under Vista.)

    Update:
    Tried increasing the volume in control panel -> Realtek HD audio manager. No success.
    I have used a bunch of different drivers, both from toshiba's website and realtek's.
    Recently did a fresh XP install on another hard drive (don't have Vista install media), tried both 5.10.0.5869 and 5.10.0.6066 drivers (5.10.0.6066 is from march 13, 2010), sound still as low no matter what I do.
    Did the really desperate thing: bought a new (used) sound module on ebay ("Toshiba Portege R500 (PPR50E-00L048EN) USB jack" on ebay.co.uk), but it has the same problem as the original one.
    I was thinking perhaps the sound module doesn't get enough power from the motherboard, but since there is some sound (although very low), the USB jack on the module works, the headphone/mic jack detection works, and the diagnostics found in the Control Panel all say that the device is working OK, I don't think it's a hardware problem.
    I'm guessing there is a problem with the drivers initializing the sound to a ridiculously low setting, and increasing the volume level to 100 makes it go up to a level equal to perhaps 2 in a regular system. That should be solved by a fresh install, but it isn't.
    Perhaps the BIOS messes up the sound? But re-flashing the BIOS doesn't help...
    Anyone got any other ideas?
    I've googled and found people having problems with low sound volume on other laptops using the ALC262 chip, but no general solution.

  • X-fi Xtreme Music soundcard PROBLEM: Microphone volume too low(unusab

    Hello, I've spent a while?sifting through these forums and?can't find any solution to this problem. Many people have been asking this same question and?aren't getting any solutions. When I say the microphone is?too low, I mean it's at the lowest possible volume it could?run at,?so it's unusable and?might as well not be functioning at all. Keep in mind every volume setting on the computer has been set to max.
    Is their anyone?that?owns a X-fi xtreme music sound card?using a?microphone that does work?If so, what microphone are you using?I'm only?suggesting that theirs some odd settings with this card that only allow a certain kind of microphone to work with it. I'm using an old mic that works perfectly with my sb li've and that I've had for 3 years now. I'll echo the same basic details I've already checked over. They can be found in other customers' posts who are having this?same problem.) Microphone works - tested on other systems and other cards2) Microphone volume is on max - both in recording and playback (although playback is muted)3) Gain is enabled - Ticked +20dB box4) Drivers are current - tried shipped drivers, current stable, and beta release?Here are more links to this problem, which has not been solved yet:
    http://forums.creative.com/creativel...ssage.id=49623
    http://forums.creative.com/creativel...id=29980#M4984
    I?suspect no one?has?the answer to this problem?yet. But could someone please tell me if they are using this soundcard with a mic that is working. If so please tell me what microphone you are using.

    I don't know if this is the latest thread but it seems to be. Obviously this is a big prob for a lot of pee
    ps.
    I have Just built a new machine and included a X-Fi Extreme audio for the 8 channel sound capabilities for movie viewing etc, but .. I also run Teamspeak servers for several games ( WoW , UT , CS etc) and find myself unable to communicate using said card. problem is mic boost is available in playback mode but not in record mode. If you activate mic boost in playback it does actually increase volume in output mode also (don't ask me why) ...but not by much . Not enough for peeps on the other end to hear you while gaming. So... if you can boost mic on playback , why not on record ? which is where it is suposed to be in the first place. there are a LOT of frustrated gamers out there that have paid good money for the surround experience but are unable to do what previous cards have done well .... and that is allow communication between players . please don't ignore this as this is not an operating system problem.... i have installed this card on Vista and XP (both X64 and 32)? and still no mic boost from the software available. you know the problem .. at least acknowledge it and give an update. thank you?Fly

  • Volume too low on ringer and with hands-free headsets

    Both the ringer's volume and the volume within headsets are too low in my new Droid X. When holding it to my ear while talking it is loud enough well below max volume, but hearing people through headsets while driving is often too low with all volumes set to max (on loud freeways, for example). I usually keep my phone's ringer on silent vibrate, but it would be nice to be able to turn it up louder when the phone is sitting on a desk at home. Cell phone ringers can be obnoxiously loud, but there are times when people need to have them turned up.
    Because it is an issue in both the ringer speaker and the jack for wired headsets, it seems like there is a good chance of getting a software fix to raise the max volume levels. Reading posts on forums, it seems clear that this problem is widespread in most, if not all, Droid X devises.
    If you are having similar problems, please take a moment to call both Verizon and Motorola with a polite report of the issue. I spoke with both today and they said they were aware of the issue, and the tech at Motorola said they were "looking into" a software fix for it. If enough people call and report it, we have a better chance of getting a fix sometime soon.
    Verizon's support line is: (800) 922-0204.
    Motorola's is: (800) 734-5870 (I chose #6 for "other issues" a couple of times after routing into Droid support to get a live tech)
    It can be frustrating to filter through the support systems and report it, especially if they tell you to try obvious things like rebooting the phone and turning the volume up, but it really is the only way to get them to fix this issue. Both techs I spoke with actually looked in their systems right away and acknowledged the issue is being reported by people.
    Of course, if anyone has a real solution to this issue, please let us know what it is!

    Thanks for the suggestion JKramer. I should have been more clear about having adjusted all volumes up in the settings screen. Assuming all sound options are located within the "Settings --> Sound & Display" screen, then yes, I have tried changing them. I have also tried changing the option to "use incoming call volume for notifications" under the "ringer volume" settings, after reading that someone had success in improving volume that way.
    This issue is not a problem all of the time. It is only an issue when there is an elevated level of background noise, such as driving on the freeway, or having music or a movie playing in the room.
    The phone is otherwise excellent! I live and commute in areas of very spotty reception (with all cell providers), and this phone will keep calls and not even have voices garble where my past two phones have consistently dropped calls in at least five problem locations. So far, everything else about it seems to work great!
    Maybe some of these phones don't have this issue. Or, maybe the people who say they don't encounter the problem are lucky enough to live in relatively quite environments most of the time. In a quiet house or office, it is certainly loud enough. It just needs to have the option for increased volume when in noisy places. The issue is that its "max volume" settings are not as loud as with other phones.
    Searching for something like "Droid X volume" will indeed show many people experiencing these same problems on various forums...

  • Volume too low on Lumias

    I previuosly owned a Lumia 800 and now a Lumia 920, and both have exactly the same problem...the earphone volume is just too low. Things are fine of you are hearing in a quiet room, but if you are walking or jogging in the street, the music volume at 30\30 is too low.
    Nokia should get an iphone or ipod and compare, Hard too see how Nokia can sell itself as a music platform, yet produce sub par music devices.
    I'm angry because of this. The Lumia 920 is an expensive device. Switching back to the iphone...

    I love the Lumia 920 and the Windows 8 OS. I started off with the iphone, then to android, and now to windows 8 phone. However, there are certain things that should be left up to the consumer to control. Not everyone is the same, your hearing may be more sensative than another person. Since this is a Nokia issue, the volume should have been left to a volume level that will please everyone. I like listening to music loud especially when I am cutting my grass. It is annoying using a weed trimmer and I can hardly hear the music cause it is too low even though I have it at the max setting. The exteranl speaker is the same issue. 10/10 is rediculous. Everyone is always trying to control the way others do things and say things, express themselves, etc. It needs to be adressed and included in the next update. 

  • Volume too low on album purchased on iTunes

    I purchased an album on iTunes and when I burn to CD the volume is too low. I have done all suggest things to "enhance" the sound. All other items I have purchased are fine. It just seems to be this one album. Any suggestions. Is there a way to "repurchase-download" without paying.
    Jenean

    Craw4dm,
    If you go to iTunes menu, select preferences and click on "playback" button you'll see a check box called "sound check". This enables the computer to adjust the volume of each track so that they all sound similar in volume. So no, you don't have to go through each track! Its a global setting of your music player.
    I have it switched off at all times. I also have sound enhancer switched off at all times.
    These features have no effect on volume (or anything for that matter) when you burn CD's.
    As to the original poster, if the CD sounds quiet then that is how its supposed to be. If buy the CD in the shops it will sound the same. Note that there is big trend at the moment to make albums sound very loud using special processing at the mastering stage (when audio is prepared for album release). It is a trend that most "audiophiles" (or IMHO anyone with ears!) detest. Look up "loudness wars" or similar, on google.
    Indeed the "sound check" facility in itunes is there to counteract the fact that CD's sound different in volume - a fact that is made all the worse by the record company practise I have just outlined!
    I suspect the "quiet CD" just sounds more like it should do and its being compared to a CD thats been mastered overly loud.

  • Earpice Volume Too Low!!

    I switched from Verizon and a RAZR phone to the iPhone last week and the earpiece volume is TOO low!! I can only hear well in a quiet room or when I use the Headphones, but in a restaurant holding the phone up to my ear, forget it, very low volume. Heck I was walking along Collins on South Beach yesterday and the street sounds made it impossible to hear well.
    This is BULLS%@#!
    Is Apple doing this to conserve on battery power?
    Other than that, (oh and Safari crashing everyonce in a while) I love the phone.

    If u change the volume on the phone does it work?
    I dont have that headset so i would know...
    and the jawbone is probably much better than it
    About the crashing... it happens to probably anyone, but apparently, by reseting it (holding home and sleep) it makes them happen less often

  • AUDIO VOLUME TOO LOW

    My hp 650 notebook's audio volume is too low. How can I make it sound louder

    Hi Macarius,
    Your HP 650 is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • IPad volume too low on Apple TV when watching movies

    Hi.
    I have the latest Apple TV, 3rd Gen iPad and Retina MacBook Pro.  If I play any movie through Apple TV using my iPad (using Video App) the volume is often far too low.  This means that I have to turn my Amp/Speakers up (to around +60; +40 is normal) often leading to the sound cutting out altogether and on one occassion blew my amp.
    However, I can put the identical film/file on my MacBook Pro - stream that into my Apple TV and the volume outputs at +40 as normal and everything is fine.
    Also - If I stream TV etc through the iPad and play it onto my Apple TV - again this can be heard no problems at +40.  The same can be said if I stream a youtube video using the iPad (+40 is fine)
    I can only conclude there is something amiss with my iPad or in partic the Video App/settings for films but have no idea how to remedy it.
    Pls can someone help me sort this as my Macbook pro is often left in the office and so I cant use it to watch movies at home all the time
    Thanks

    Have you tried checking or resetting your volume limiter under "music" from the Settings home page.  Scroll down to "Music" and tap "Volume Limit".  Once there you can either turn it off or raise the maximum volume.  If you go to the max it will just turn off the limiter.
    Here's a video from CNET that also explains this easy adjustment. 
    http://howto.cnet.com/8301-11310_39-57589446-285/restrict-volume-on-iphone-ipod- and-ipad/
    Hope this makes it better for you.

  • Audio volume too low on Pavilion 15-p027tx with beatsaudio

    The laptop comes with a beatsaudio system.
    Even though the volme is at its maximum it is still too low.
    I have tried Playback Devices>Speaker>Properties> and then the enhancements tab is missing so i cannot alter loudness equalization.
    Please help.
    This question was solved.
    View Solution.

    Hi @MayurJoshi ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your  HP Pavilion 15-p027tx Notebook and playing sound too low. Here is a document on troubleshooting sound.
    Please make sure your updates have been done on the Notebook. In the device manager under sound right click and update the driver. Here is another step to try.
    1. Right click the Speaker icon in the bottom right corner by your time.
    2. Click Playback Devices.
    3. Click Speakers/Headphones.
    4. Click Properties.
    5. Click the Advanced tab on the Properties window.
    6. Change the Default Format drop-down to the highest quality.
    7. Apply the properties.
    8. Click OK to close the properties window.
    9. Click OK to close the Playback Devices.
    What browser are you using? I would check to make sure the browser is up to date.
    Does this happen when playing a DVD or CD?
    Make sure you do not have other things running in the back ground when a video is playing as open browser Windows do effect the streaming.
    Hope this helps you with the sound.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • E52 Speakerphone volume too low

    Hello,
    When using speakerphone on E52 sound volume is too low. Even if I keep it on max, it's still too low.
    Considering that ringtones can be played with a lot stronger volume using the same speaker (as speakerphone does) -  I assume there must be a "trick" to pump up the volume of speakerphone, right ?
    Any code or workaround ??? This is somewhat silly situation, ringtones quite loud, speakerphone too low !
    Thanks for help !
    Somewhat similar report here:
    E52 Firmware Thread
    FW: 053.001, Model E52-1, Type: RM-469, Cst version date: 06-Jan-2011 (DE model).

    Months later, can't find solution on web... anyone cares, hello Nokia ??
    PS: On my second phone, which is samsung, I can tune all kind of volume parameters (around 50 params, db, tx,rx, etc..). Must be something on Nokia as well...

  • Fixing Volume -- Too Low

    Has anyone got a fix without hacking it with AudioAmp (seems to be mixed results with 3g). But i have to admit, the volume even at max is too low - and I would love for it to be higher.
    any help here desired

    My wife and I have matching 1st generation iPhones. Her speaker/ringer is easily 2-3 times louder than mine.
    Can't see any 'film' protecting speakers, and I have restarted, reset, restored, cleared/reset all settings and volume controls and sound options with no success. One phone is 2-3 times louder than the other.
    There has to be a fix for this!!! It's a huge problem, I'm missing calls!

  • Flashplayer volume too low

    Browser: Chrome v36
    OS: Windows 7 64-bit
    Flash Version: 14
    Basically for anything that uses flash player to run, the volume is too low to hear, even though in the volume mixer the volume level for chrome is at 100%, and the volume level on the video/page itself is at 100% also. I have tried to disable flash player in the plugins window which solves the issue for certain things (i.e. vimeo videos). However, Adobe Connect recordings require flash player to be installed and enabled to play, but the volume is then too low to hear.
    I have tried deleting all locally stored settings in flash player, reinstalled it, but the issue remains.

    and unfortunately for me, flashplayer autosets its own volume to 1 on every restart. i think this is the problem in your case too, and you might not see some audio sliders because of your audio drivers. maybe ill update my own audio drivers some other day. *i am using a creative audigy fx*

  • HP Pavilion DV6 Notebook Speaker Volume Too Low

    I have all speaker/audio settings everywhere set at maximum, but the speaker volume I get when I play any kind of audio or video feed from anywhere is way too low. (If I plug external speakers into the headphone jack, the volume is much better.) I've seen all of the posts where the solution was to do something on the "Enhancements" tab in Playback Devices, Properties, but I don't have that tab on my system. When I go into the Configure option and do the audio test, the volume there is great! I've also checked for updates on my audio drivers and the results have come back saying I have the best version already.
    I've been putting up with this for a long time, but I'm really tired of having to plug external speakers in when I want to watch a video or listen to streaming music. I'd appreciate any suggestions (other than the one involving the "Enhancements" tab that I don't have) that might help fix this problem!

    Hello @Lagil ,
    Welcome to the HP Forums!
    I understand the audio appears to be way too low. I will do my best to help! First, please provide the following information and try the following steps:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    5. What steps have been attempted from the following thread, and what were the results: Troublesho​oting Guide: Audio does not Work after a Certain Period of Time
    Thanks!
    Mario
    I worked on behalf of HP.

  • Headphone volume too low

    I have recently purchased the Z3, particularly for its advertised audio features.
    Unfortunately, the audio volume does not go loud enough in all 3 sets of headphones I have tried.
    Is this normal?

    eida33 wrote:
    I'm sorry to hear you're having issues with your sound quality. Please note that when you use a headphone, make sure you open walkman and increase the volume from there. You will not get this notification if you increase the volume without having the walkman app open. A pop up will say that "going above the volume limit is not safe etc." Make sure that you accept the risk and the volume should increase. Also check the settings in walkman, enable ClearAudio. Finally, make sure the volume on your headphone (if applicable) is the highest.
    Good luck.
    The volume is much too low and for a phone this expensive i would expect better ,and there is no notification
    allowing one to increase the volume when up full like there used to be ,and quite honestly the  decision should be mine on how low or high  the volume should be ,and there is still time to send this phone back ,which might act as a wake up call for Sony ,best wishes Brian.

Maybe you are looking for

  • Cannot send message using the server (null)

    i use mail 2.1. i have a .mac account and have three other email accounts attached to my mail account. lately, i cannot send any email. the switchiing ports fix hasn't helped either. this is the error message: CANNOT SEND MESSAGE USING THE SERVER (nu

  • Premiere Pro CC won't render and Encoder freezes at 50%

    I'm trying to render a multicam project.  Up until 2 days ago, I could render projects out fine.  Now, if attempting to render with Premiere, the project stays at 0% indefinitely.  If I queue the project in Encoder, it gets to 50%, then just stops an

  • IWeb and OSX Mountain Lion

    Apple just announced a new version of OSX for the summer, called Mountain Lion. Will iWeb work with ML? Probably no one outside of Apple knows, but it's something to watch out for if, like me, you continue using iWeb.

  • Identity field between 2 tables

    I have 2 tables which should have ID as identity column in common. For example: If there is insert insert into first table, the id is 1. Then there is insert into second table, the id is 2(and not 1). Then insert into first table, the id should be 3

  • IBook G4 that's connected to wifi but not connected to Internet

    I Have a later 2005 model iBook G4 running OS X 10.5.8 Leopard, I'm having trouble connecting to the internet. I am able to connect to my home WiFi network but not able to connect to the internet. How do I fix this?