Sound changes when moving mp3 from quicktime to itunes

When I move a mp3 from quicktime to itunes the sound changes. itunes makes it sound a little worse from the original mix. I dont think its the equalizer becuase i tried fooling around with that and tuning it off for a better result.
So the mp3 sounds perfect in quicktime but terrible in itunes whats my problem?

I figured out that if i bring it into itunes as mp4 instead of mp3 it sounds alright.
So you are not moving the MP3 from QT to iTunes as you wrote in your first post. You are converting from AAC to MP3.
i tried to burn it and i think it automatically converts it back to mp3 for the burn
No.
If you have audio CD selected in iTunes prefs -> Advanced - Burning, it will convert them to an audio CD.
It willnot convert any other time unless you tell it to convert.
is there a way to burn it while maintaining the mp4 quality??
Select Audio CD or Data CD and it will burn an audio file or the MP4 file.

Similar Messages

Sound Vanishes When Moving Clip From Clips Pane To Video Selection Timeline

Hi,
I've been using iMovie for years and never run into a problem, but just today I imported some video, played it back fine in the clips pane, then dragged them down into the main video timeline, and all of a sudden there's no sound on them. The video plays fine, but no audio at all.
Anyone know what happened? I can't figure it out.
Thanks!

is it this?
http://danslagle.dvmix.com/mac/iMovie/audio/1000.shtml

Sound Buzz when transferring file from Trash to desktop

I get the occasional Sound Buzz when transferring file from Trash to desktop
Its a Short "grounding" buzz similar to slowly plugging an electric guitar when the amp is on, but its loud !
I am just using the internal sound,

Brett - thanks for that input, but as stated in my original post this happens whether I do the copy within Finder, or from inside Bridge.
Your note did inspire me to try one thing though: I UN-checked my Bridge preference to export caches to folders when possible, then I went to the folder I was trying to move (on the NAS) and did Tools > Cache > Purge Cache. I found that if the folder contained only files and no other folders, then I could move the folder to my desktop. However, if the folder in question had nested folders, then I still run into the same conflict.
Question: since this conflict does not happen when moving a folder from one computer to another computer (but only from the NAS to a computer), I'm not sure how your logic holds when you say "Bridge is trying to cache the files you are moving and creates a ".BridgeCacheT" file before the remote version is copied"
To answer your other question, we use AFP or at least is says "afp://server.local" when we connect. My apologies for not being an expert on this. The icon of the NAS on the desktop looks like the icons for the other computers.
Thanks, I'm still trying to solve this. It's really become a major problem for us as we now have to drag files individually (rather than by folder) when we want to do something with them. -- Jim

Image size changes when moving an image between Lightroom and CC.

Image size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
Help!...Please?

The penny will drop soon or maybe the cloud will lift.
In Lightroom all editing is undoable/nondestructive.
Hence a crop of 3x2 is not inches, centimetres, pixels or anything else. It is jst a ratio. When a file is exported, either to PS or disk, then the crop ratio has size determined in respect of pixels and inches or cms.
So my 6000x5000 pixel image I will crop to 3x2 that leaves (before exporting) a 6000x4000 file.
Now when exported it can be set to export at
100pixels per inch and will end up at 60x40" when printed.
200pixels per inch will end up at 30x20"
300ppi will end at 20x13.3"
You will notice in the Crop Tool there are no size denominations such as inches or centimetres as an image file only has pixels and the determination of size is done through exporting or printing.
Hope that helps somewhat..

Why does my font/text change when I switch from Classic 3D to Ray traced 3D in After Effects?

My font/text changes when I switch from Classic 3D to Ray traced 3D. Why is it doing this? Also, I cant get the font/txt to look the same after I switch from Classic to Ray traced. How can I get it to look the same?

I am pretty new to After Effects so I hope it's not my inexperience that's causing the problem. (It probably is)
I just updated to the most current version of AE.
I am on a mac pro late 2013 12GB 6 core. Running OSX 10.9.4
Okay so after looking at it a little closer, I think the color is what mostly changes. The first screenshot is the what the text look like with Classic 3D and the second screenshot is what it looks like after I change it to Ray traced 3D. Also under the "Mode" section..the pull down that says "Normal" disappears. I'm wondering why the font color is changing?

When moving material from Uml-zone, we -zone etc.

When moving material from UML-zone, We-zone, etc. Can you get the system to generate individual SU#'s.
I have 30 items of XYZ, I want to move all 30 at one time and generate 30 individual SU#'s......Is there a way?

Yes, this is possible and standard
If you post a material document to place the stock into the interum storage type try LT06 and use the document as a refrence, you will need to maintain the LE quantity in your material masters and the system will automaticaly propose the correct number of SU when you click "palletization".
if you do not maintain the LE you can enter the qty as (for example) 60 X 3000EA / 1 x 2500EA (or whatever unit of measure you use)
This is very standard for WM and easy to do once the configuration is in place and you learn the transactions.
LT06-LT12
Edit: if this doesn't fit for your needs please provide more info about the transactions you currently use to put the stock into the WE-zone and how you are currently moving it out

How do you change a music file from quicktime to a mp3 audio file

i dont know how to change my current music file from quicktime to a mp3 audio file, how do you do it?

i dont know how to change my current music file from quicktime to a mp3 audio file, how do you do it?
If you are using a "basic" Mac OS X v10.8.4 install/codec configuration then you can use iTunes to convert to MP3 audio. It has a built in MP3 encoder which you can set up as your default audio import/conversion compression format. Otherwise it depends on how you system's codec components are configured and/or what media applications you have installed.

Audio clips change when moved from sequence to sequence in FCP7

Working on a documentary piece within FCP7 and am having problems with moving audio from one sequence to another. Both sequences have the same settings, but when I copy the audio clip and paste it into the new sequence, the audio that pastes is from the same clip but is not what I copied. Does anyone know why this is happening and/or how to fix this?

Just to back up Michael. The native sample rate for video is 48khz. To work at anything other than that is to ask for problems.
x

How can I preserve the date and time of photos when moving them from iPhone to iPhoto and then to other folders on my computer?

In the past I’ve had no problem moving photos from my iPhone 4 into various folders on my computer while retaining their original date and time. I would import into iPhoto, then drag the photos from iPhoto into other folders via the Finder or Adobe Bridge (which is my principal image organizer). The original date and time of the photo would always travel with the jpeg into iPhoto and then into other folders. However, sometime during a recent session transferring photos in this way, the dates of the photos started to change at the point when I copied them out of iPhoto. Within iPhoto itself, the various original dates of the photos are retained. But in Finder and Bridge, copies of those same photos all carry the same (worthless) date: the date and time that they were imported from my iPhone. I can’t figure out what would have changed on my Mac to make it start re-dating my photos. I was happily dragging and dropping photos, and suddently I started to lose the original dates. Did I inadvertently change some settings? (I am running OS 10.6.8 and using iPhoto 8.)

(I use iPhoto only to import from my iPhone; I organize all my images, including thousands of RAW files, in folders on a big external drive.)
Why are you using iPhoto at all? use image capture or drag and drop the photos
The problem is that the files I am copying are getting stripped of the EXIF metadata
eliminating iPhoto from your work flow will eliminate one oppertunity to have this happen For photos in iPhoto it is best to export them rather than drag an drop them - this assures your EXIF and IPTC data is correct and uptodate
Why would I be able, over many years, to retain EXIF metadata in photos imported from an iPhone--then one day find that the same workflow strips such photos of EXIF data?
Because exporting is the supported way to "export" photos - I never drag and drop photos out of iPhoto and I never use thrid party programs on the photos in the iPhoto library - try exporting as suggested above and see if that is the solution
LN

Modification dates change when moving/copying between hard-drive and flash

I use a flash drive to store most of my work-related documents on. That way, I have them when I'm at school (on a Windows XP computer) and at home on my Mac OS 10.3.9. I
try to occasionally back-up my flash drive by dragging it's contents to my Mac. Copying in this direction USUALLY retains the appropriate modification date.
However, if I move things from the Mac to the USB drive (I occasionally make changes to a file on the Mac when my flashdrive isn't handy), the modification date changes to the copy/move date. Is there a way around this? It alters the information about the file and sometimes makes a version look newer than another version of a document. When in reality, it’s older--it’s just been moved/copied and the date changed.
I often move things back and forth for backup purposes, but if it keeps changing the dates on it’s own, it’s impossible to tell which is REALLY the
most current copy/version.
Is there a fix so that copying and moving files between volumes does NOT change the modification date of the file?
Powerbook G4--12 in.--1.33 GHz Mac OS X (10.3.9)

Hi, teacher. When my Lexar JumpDrive Secure is formatted as a MS-DOS volume so a PC can read it, the last-mod dates of files that I copy to it are changed to the date and time of copying. When it's formatted as a Mac OS Extended volume, the original last-mod dates are copied to it unchanged. Looks like you can thank Bill Gates for the inconvenience: apparently it's a DOS file system "feature". Don't you wish you could use Windoze all the time?
On second thought, the files really are changed when you write them to a DOS volume, because the DOS file system has no place to store the metadata about your files that a Mac pays attention to and a Windoze box doesn't. So when you write Mac files to a DOS volume, that metadata — which is part of each Mac file — is simply discarded, causing the last-mod date to change.
Message was edited by: eww

MPEG-4 file - can this we changed when it imports from iTunes store?

I recently signed up for iTunes and I was wanting to import songs using the MP3 format, but each time I download it comes through as MPEG-4. I want to use the songs in my family video I'm creating through Roxio Easy Media Creator, but it only accepts MP3's. How do I change the setting so when I download from the iTunes store it comes through as an MP3, not MPEG-4? I've tried everything.
I'm also doing this on Windows XP pc - in case it makes a difference. Any help is greatly appreciated. I'm going crazy trying to figure this out.
Thanks.

EG1974 you can get your iTunes file to MP3 or WAV but the process is a bit convoluted. You'll also lose some quality in the conversion process but you will have something you can play in your car or mp3 player (If it's not an ipod).
1) In preferences/Advanced/Burning
Choose disk format and burn the songs to Audio CD.
2) Once you have done that, again in preferences/Advanced/Importing
Change your import settings to MP3 encoder or WAV encoder and setting to Good Quality 128kbps (I find this works on just about every type of player) then load your CD, import your songs back into iTunes as mp3's. You'll then be able to import the tracks into roxio
At the end of the process you should finsh with both the original & mp3 version in your iTunes libary.
Hope this has been of some help
Locksmith

GET_FILE Error: java.lang.reflect.InvocationTargetException when moving content from tier1 to tier 2 storage

Purpose: to migrate all the ACTIVE records from tier1 storage to tier 2 storage.
A have applied MLR 11 patch i.e Patch 20624268: WEBCENTER CONTENT BUNDLE PATCH 11.1.1.8.11
My Configurations
Tier 1 intradoc.cfg configuration
VaultDir=/u01/app/oracle/oracle/product/11.1.8/fmw/user_projects/domains/wcc_domain/ucm/cs/vault/
WeblayoutDir=/u01/app/oracle/oracle/product/11.1.8/fmw/user_projects/domains/wcc_domain/ucm/cs/weblayout/
I then changed the above parameters from TIer 1 to Tier2 as follows
VaultDir=/u01/tier1_storage/vault
WeblayoutDir=/u01/tier1_storage/weblayout
Then rebooted the machine. Now when i try to search for all the older records which were stored on Tier 1 above using GET_FILE
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body xmlns:ns1="http://www.oracle.com/UCM">
<ns1:GenericRequest webKey="cs">
<ns1:Service IdcService="GET_FILE">
<ns1:Document>
<ns1:Field name="dDocName">OWCDEV_004521</ns1:Field>
<ns1:Field name="RevisionSelectionMethod">Latest</ns1:Field>
</ns1:Document>
</ns1:Service>
</ns1:GenericRequest>
</soap:Body>
</soap:Envelope>
I Get following error
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<ns2:GenericResponse webKey="cs" xmlns:ns2="http://www.oracle.com/UCM">
<ns2:Service IdcService="GET_FILE">
<ns2:Document>
<ns2:Field name="error">Error: java.lang.reflect.InvocationTargetException</ns2:Field>
</ns2:Document>
</ns2:Service>
</ns2:GenericResponse>
</env:Body>
</env:Envelope>
Problem
The biggest problem is that i am not able to search older records which are stored in tier1 storage using GET_FILE, But if i check in new records to Tier2 i am able to use GET_FILE to search them. I must be able to search both Tier1 and Tier 2 Storage content files using GET_FILE. To reproduce the error, change the vault and weblayout path from intradoc.cfg,reboot then try to use GET_FILE to search for records on the previous path, then the you will get the above error. I tried to create partition and storage rules but i am not successfull. I am not so sure exactly what to change here. Please advice

Hi 2611729
For searching content items service is GET_SEARCH_RESULTS and for downloading the file its GET_FILE
I dont think changing the configuration value will serve the prupose over here. You need to move the contents from one location to other and going by the explanation you have provided that movement has not happened. Every content item has a metadata called xStorageRule which mentions the location where file is stored. In your case, though you've changed the configuration setting the metadata value is still of tier1 for older content items.
You have changed the default value and thats the reason contents are getting stored in tier2 storage now and you are able to access them via search. Since for older items xStorageRule holds older value which is different that current one you are not able to search.
However, i belive you're trying to move the contents from tier1 to tier2 storage since contents in tier1 storage have crossed X days and might not be accessed frequently by users.
Below mentioned option might work.
Retain your configuration setting for valut and weblayout as earlier.
1. Create a new storage rule Tier2Rule pointing to tier2
2. Archive your contents using Archiver applet.
3. Import the contents from created archive using applet and during import change the metadata xStorageRule to new storage rule Tier2Rule. This moves all your content onto tier2.
4. Checkin new documents and it gets stored in tier1 location. I assume default storage rule will point to tier1.
5. While searching using seach forms use the metadata StorageRule and it will provide dropdown of list (like tier1rule, tier2rule and so on). Select and perform the search.
For download using GET_FILE, i'm not sure whether by passing xStorageRule it will work or not. You'll have to try it out by small POC or customize the GET_FILE as required.
I've not tried this approach earlier but by system-wise understanding it should work.
Also, please refer UCM Backup strategy this discussion thread and others in the forum. Take a look at SAM-QFS which does this job transparently or any other solution in-line to that.

Anyone using 4.0 Beta 5 on MAC and noticing Adobe Flash creating boxes when moving away from site where flash is used?

Just upgraded to FF 4.0 beta 5 - noticing that when I visit a new page that uses Flash, I navigate away or to other sites and the box that Flash used is blanked out and super-imposes itself over the page. That means when I move from the flash page, the only thing I can do it close the browser and reopen.
Yes, I am using 10.1 (or whatever the latest flash is for my MAC - that also has all its updates). Reverted back to FF 4.0 beta 4 and NO PROBLEM using the older beta version. HELP.

That sounds like a known problem on OS X. From the known issues section of the [http://www.mozilla.com/en-US/firefox/4.0b5/releasenotes/ Firefox 4 Beta 5 Release Notes]
"Plugin content can be rendered incorrectly leaving blank white squares over web content. Scrolling or switching tabs will often fix the problem, although sometimes you must close the tab which contains that plugin content (see [https://bugzilla.mozilla.org/show_bug.cgi?id=592453 bug 592453])"
This should be fixed in the next beta.

Computer freezes when moving files from USB, or to another partitioned HD

Hello, i've been moving files from two USB's to my Macintosh HD, and when I do that, the computer kinda freezes up, i can move the cursor, but not kinda click anywhere, and then a minute after or something, it gets normal again, but the transfer is going horribly slow. this happens when i move from Macintosh HD, to Macintosh HD 2 (a partitioned one). the files are 2 gb each USB. which means im transferring 4 gb at the time.

Neurot wrote:
I have 6 folders on my hard drive. These folders were created by downloading a bunch of rar files, then extracting them each to their own folder. I have not touched the permissions, so they should be the default of me having read/write and everyone else having read (correct me if i'm wrong).
Using two Finder windows, I drag and drop the six folders from one hard drive to another, and hold down the Apple key so that it moves instead of copies. I let go and it starts copying the files (since there is no "move", but rather a "copy and then delete").
I would recommend you don't use this method to move a lot of files between drives. it's much safer first to copy and if the copy is successful to delete the original afterward. there was a data loss bug in OS X a while back that wold sometimes lead to total loss on both the source and the target when doing this.
this bug is supposed to be long fixed but still...
How is the hard drive you are moving the files to formatted? what yo describe sometimes happens when moving a lot of stuff to or from FAT formatted drives. also, repair both drives in disk utility. repair disk, not permissions.
Message was edited by: V.K.

Can't transfer mp3 from overdrive with itunes 12.1 Was told aware of problem. When is it going to be fixed

Can't transfer mp3 from overdrive with new itunes 12.1 update. Was told aware of problem. When is it going to be fixed? This is very frustrating. There are a lot of glitches now with trying to transfer audiobooks even the WMA. 12.1 deleted my entire music library.

We don't work for Apple. If you want to know when something is going to be fixed you'll need to ask them.

Sound changes when moving mp3 from quicktime to itunes

Similar Messages

Maybe you are looking for