Sound check does not work with dock connector

I have the 60GB video iPod. Sound check does not function when using the dock connector, i.e. plugged into my Belkin Autokit or a Kensington SoundDock. However, it functions as intended when used with the headphone jack. I previously used a 4G iPod, and sound check did function with the dock connector using those same products.
I am wondering if this could be:
a) a compatibility issue between the 5G connector and the older accessories
b) a firmware issue (I am using the 10-12-05 updater)
c) a bug in the 5G units
d) a bad unit (i.e. mine only)
If there is someone out there who has the same setup and could test this, it would help me. I could eliminate (a), (b), and (c) if yours works, and then I would try an exchange of my unit.
Thanks in advance if you can help.

I have a similar problem. I've never really used sound check but I recenty installed a Harman/Kardon Drive+Play iPod interface. The sound quality using the dock connection is not great. It sound somewhat distorted. It sounds much better through the headphone port. i always thought the dock connector would provide a cleaner signal. I will borrow a click wheel 4G iPod to see if the problem is with the interface or my video iPod.

Similar Messages

  • Garmin App not Working with Dock Connector in Ford Flex

    I'm having an issue getting the Garmin N American iPhone App to send its turn by turn directions to Sync in my 2010 Ford Flex. I realize that I'm dealing with 3 technologies, Microsoft Sync, iOS in iPhone 4S and Garmin App. So I'm posting to 3 forums looking for help. 
    The issue is that I can only get the Garmin turn by turn directions to go through the Flex speakers if I use Blue Tooth Audio. If I plug in the iPhone and set Syne to USB, music will play fine by setting the iPhone to Dock Connector. But in the Garmin App, the icon (similar to AirPlay) is not highlighted. I can touch it and have a screen to select either Sync or Dock Connector. Selecting either doesn't cause turn by turn directions to go through the Flex speakers. 
    Any one run into this and have a solution? All software is up to date. 

    -Does the VGA-out works for other items like videos? The following says VGA should work for the slideshow.
    http://support.apple.com/kb/HT4108
    - Have you reset your iPod?
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • I am having the same problem with my sound, it does not work with my games. I tried the info that was given below

    I tried the suggestion for the sound, but it is not working. the sound will not play for my games, but it does play for all other Apps

    As you don't say what suggestion it is that you've tried, I don't know whether you mean for having notifications muted, so you may already have tried the following.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • Why budget check does not work with account assigment distrib. by quantity?

    Hi Gurus,
    I have an issue in the budget check for Purchase Order (PO).
    I'm using the FM B31I_ACC_PURCHASE_ORDER_CHECK.
    The case is next:
    1 Item with 21 account assignment type AS and distribution by quantity:
    ASSET_NO QUANTITY
    1           1
    2           1
    3           1
    4           1
    5           1
    6           1
    7           1
    8           1
    9           1
    10          1
    11          1
    12          1
    13          1
    14          1
    15          1
    16          1
    17          1
    18          1
    19          1
    20          1
    21          1
    All account assignment are for the same G/L account, fund, functional area...
    The price for each item is $2,499.14, then total price is $52,481.94 (2,499.14 * 21).
    I debugged the FM B31I_ACC_PURCHASE_ORDER_CHECK and found that in FM BBP_PD_COMMITMENT_FILL_BAPI it's making a rounding with percentage:
    The system assume next:
    Each item is 4.76% of total (result of divide 100% / 21 = 4.76190476...) but the percentage is rounded to 2 decimals.
    Then it makes the conversion by the amount corresponding to each item:
    ($52,481.94 * 4.76) / 100 = $2,498.1403
    Finally the budget is checked by $52,460.95 (2498.1403 * 21).
    But available budget is $52,481.90, the check pass, but really there are 4 cents missing (total price is $52,481.94).
    Can somebody say to me if this is a standard behavior?
    It can be fixed with configuration?
    The problem is for multiple account assignment with distribution by quantity and:
    (100 / quantity) = not integer (or have more than 2 decimals)
    For example: with quantity 20 it works because 100% / 20 = 5.00%, then the budget is check exactly.

    1503317 - System Behavior for Account Distribution between SRM and R/3 system
    When using distribution by Value in a SRM document this value is not correct and a rounding occurs once this document is transferred to ERP system.
    Cause
    It is not possible transfer documents to the back end system with distribution by value, due to a back end restriction.
    Resolution
    The following information is the system behavior in R/3 / ERP:
    in R/3, there is accounting distribution only by quantity or percentage. So when distribution by value is used, a rounding will always take place.
    in R/3, the use of value based distribution in SRM will lead to rounding differences.
    Distribution by quantity is allowed in SRM and MM side. However MM do not accept is distribution by value. This is internally converted to distribution percentage based.
    Keywords
    Distribution by Quantity, Distribution by Percentage, Distribution by Value

  • IPhone (3,3G,4) does not work with Apple Universal Dock.

    I have a 3rd generation iPod Touch that has been upgraded to iOS 4. My iPod Touch will no longer sync via the Apple Universal Dock. Also, my new iPhone 4 also will not sync via the Apple Universal Dock.

    Trust a geek not to give up. I decided to get to the bottom of the "iOS device does not work with the Apple Universal Dock" problem. I noticed that the iPhone 4 and iPad came with slightly different USB-Dock adapter cables. I wondered if that might be the issue. My Apple Universal Dock was connected to my Mac via the original dock adapter cables which are slightly larger. I connected the newer cables between the Mac and the Apple Universal Dock and .... voila! Both the iPod Touch with iOS 4 and the iPhone can now connect via the Apple Universal Dock. Apple changed something in the way the adapter cables function.
    Of course I still have the problem with the car head unit dock adapter ... Sigh. I'll have to call Best Buy ( uughh! ) and find out if they'll do the update for me. The were the vendor authorized installer.

  • My sound system does not work AFTER installing pc to tv wireless connection

    my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

    Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

    Please check the Play Store app for any Flash updates and install them if present.

  • After upgrading to Lion internal mic does not work with Facetime

    After upgrading to Lion internal mic does not work with Facetime.  The mic is picking up sound as noted in System Prefs.  This was working just fine before the updgrade.  Facetime works OK on my iPod. 

    you have in french a tutorial to recreate your partition here
    Rebuild partition with Recovery HD lion after upgrade to 10.7.2
    i tested, it's work !
    For your wifi problem:
    Try to change your setup of wifi, look this table given by apple:
    I changed my wifi setup wep to wpa and it's work !

  • My 4th gen iPod Touch does not work with Ford sync since updating OS

    When I updated my iPod to the new os, it does not work with my ford sync system anymore. how do I fix this?

    Have lots of issues with Fords MySync and here's some info that might help....
    Using ford sync interface, goto the phone section, then settings, and look if your iPhones name is listed, if so select the phone name thru sync interface and remove/delete it from the sync list, then go thru the Bluetooth pairing process again.
    If that doesn't work, do the same on the iPhone, select ford sync entry in Bluetooth and remove sync or forget this device on the iPhone and then go thru Bluetooth pairing again.
    If that doesn't work Power off iphone ( not sleep) hold power button till you see red slider to power off. Then restart iphone, try pairing up again.
    If that doesn't work go back to MySync and goto phone settings and use the up-down slider till you see sync master reset. Confirm then go thru BT pairing again.
    If that doesn't work there is a fuse for the my sync system. Fuse box is usually behind kick panel of front passenger seat side for the Mustang #3, its behind a paper black cover. Remove fuse for 5-30 secs then replace.
    Lastly, make sure your MySync Firmware is the latest vers. Mines 4.0.2 goto fords MySync support page to check
    http://www.ford.com/syncmyride/
    or call 1-800-392-3673 Opt 3
    A google search might help for your model and year if not a newer mustang and you couldn't get to ford.
    Good Luck

  • Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

    Question
    better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
    Details

    As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
    Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
    In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
    (3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
    C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
    Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
    Flash Player \ #SharedObjects
    If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
    If the value is blank, you could try inserting a sensible value and see whether that helps.
    Any luck?

  • RRMXP does not work with GUI 7.20

    Hi Experts,
    I have the following problem. RRMXP does not work with GUI 7.20, BEX 7.0 launches and I have to enter proper user and password. (I get SAP Logon screen with listed systems)
    It works properly with GUI 7.10 and I have not to log into BEX.
    Did anyone encounter such problem? Does anyone know what causes the problem?
    Regards&thanks
    Marek

    Hi,
    RRMXP uses OLE to launch Microsoft Excel together with the SAP BEx add-in. Then it use a macro within BEx to open the workbook. check whether  BEx is not installed properly (run SAPBEXC.XLA under C:Program FilesSAPFrontendBW) or the Excel macro security settings prevent execution of the macros.
    Also Check the below link it has some note to follow
    RRMX and RRMXP does not open the query and workbook
    Regards,
    Satya

  • External Hard Drive does not work with Lion

    Hi
    My External Hard Drive does not work with Lion this message appears:
    NTFS-3G could not mount /dev/disk1s1
    at /Volumes/My Passport because the following problem occurred:
    /Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
    the MacFUSE file system is not available (71)
    can anyone help?

    Hi,
    See this Discussion:
    https://discussions.apple.com/thread/3191198?start=0&tstart=0
    Cheers,

  • Adobe Flash Player does not work with Safari. What can I do?

    Hi,
    I have a MacBook Pro, Retina, 15 inch, late 2013,  2 GHz Intel Core i7, using OS X 10.9.4. I have installed Adobe Flash Player. In my System Preference, in the advanced settings, it is set to install updates also tells me that I have the NPAPI Plug-in (version 14.0.0.145) installed but not the PPAPI Plug-in. Is this the reason why it does not work with Safari (keeps telling me to download the app, which I did but still does not work)? Is there any way I could fix the problem? Please, help.
    Thanks.

    If you can't install or update Flash, follow these instructions.
    If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
    Step 1
    You might have to log out or restart the computer before a Flash update takes effect.
    Step 2
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
    and confirm. Close the window. Then select
               ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.
    Step 3
    If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
    Step 4
    a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
              When visiting other websites
    From that menu, select either Allow or Ask.
    b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
    c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
    /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
    Right-click or control-click the highlighted text and select
              Services ▹ Open
    from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Step 5
    In the Safari preferences window, select the Advanced tab and uncheck the box marked
              Stop plug-ins to save power
    Step 6
    Open this folder as in Step 4:
    /Library/Internet Plug-Ins
    Delete the following item, or anything with a similar name, if present:
              Flash Player (failing).plugin 
    You may be prompted for your login password.
    Step 7
    Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
    Step 8
    If you get a "missing plug-in" error, select
              Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked  
              Allow (or Enable) plug-ins
    Then click the button marked
              Manage Website Settings...
    if present and make sure that the website is not blocked for Flash.
    Step 9
    Select
              Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.

  • In FB60, duplicate invoice check does not work if invoice date is different

    In FB60, duplicate invoice check does not work if invoice date is different
    This issue is in FB60 and not MIRO.
    Duplicate invoice check is activated in vendor master.
    I posted an invoice for a vendor with amount $ 100, Reference 1234 Invoice date Nov 01, 2011
    I tried posting for same vendor (and also Co Code) with amount $ 100, Reference 1234 Invoice date Nov 01, 2011. System does not allow. This is fine.
    Now I change only date, from Nov 01 to Nov 02, and system allow posting.
    Why I don't get the error message when date is different ? It should not be treated as a different invoice since invoice reference, amount, Vendor and Co Codes are same.
    SAP documentation says that it checks document date during duplicate invoice check even for FI invoices, then why does it allows in this case.
    Is this a bug ?
    I already tried changing settings in SPRO under LIV, this does not impact FB60 invoice booking.
    Thanks
    Sandeep

    Hi,
    Use BTE - 1110 - (Check on Invoice Duplication) for FB60. Take the help of your ABAPer to make a coding in Function module mentioned in BTE.
    Need to make a copy of the FM and then you can do relevant coding.
    refer the link.
    [http://www.thesapconsultant.com/2006/10/sap-business-transaction-events.html]
    Regards,
    Shridhar

Maybe you are looking for