Sound choppy in Stream mode.

I placed my audio in the timeline, but I want it streamed rather than event driven because people will be jumping around the timeline. When I change the sound to Stream the audio gets incredibly choppy.
Any ideas?

that's what you would expect with streamed sound. you should preload the swf that contains that streamed sound if you want to prevent audio/visual glitches.

Similar Messages

Stop during viewing of HD-movie in stream mode

Ladies and gentlemen,
I had problems with Apple TV
Chart of my connecting:
*Apple TV <–> AirPort Extreme (802.11n ( n-only )) <–> iMac 24 (C2D) <–> external HDD WD MyBook 750 gb (FW800)* .
I convert a HD-movie from the .mkv ( +KLCP Matroska File , Video: MPEG4, (H264) 1280x544, 23.98fps, Audio: Dolby AC3 48000Hz stereo, filesize 4,5 gb+ )
I convert a movie in Visualhub. In the parameters of this program specify that a format on an output must correspond the format of Apple TV. I get a Mp4-file
I plug Apple TV in the ”Streaming” mode, аnd begin to look a movie. Some time all shows fine, but in 10-15 minutes play is stopped (a picture is frozen, sound is stopped), after press pause/play, I can again continue viewing, but after a while problem will repeat again.
I noticed that precipices were halted 50% film, and stops take a place only at the active stages of film (moving car, explosions, or any other quickly-moving objects)
I will be beholden for elucidations of my question.
With kind regards
Message was edited by: megadzilla

Actually that isn't what I suggested.
I suggested you convert from matroska to DV and then from from DV to .m4v
If there is an error in your conversion from matroska to h364 with visualhub that error won't disappear by reconverting it.
If you don't wish to try what I suggested, open one of the files you are having trouble with in QT, open the inspector window and tell us what it says, I suspect it will seem OK but we can have a look and see.
Of course your problem could be a slow network, but if you don't wish to diagnose your problem it likely won't get solved.

Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
I came home, banged the phone against the wall and it worked.
Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well.

Moving purchases done on an ATV in streaming mode to my PC

I have chosen to use my ATV in streaming mode as I had many issues in Sync mode. Would appreciate some hints on the following challenge:
I have purchased movies using my ATV. These purchased movies are not showing up in iTunes on my PC. How do I move these across to my PC in order to ensure I have a backup and be able to transfer them to my iPod Touch?

you need to have sync mode turned on for items to auto-sync back to itunes from appletv.
turn it on, but then choose "custom sync". this will allow items to sync back to itunes, but will keep the 100% stream that you require.
this is how mine is set up.

No tone in Streaming Mode

Hello, i have 2 Apple TV Boxes wich are connected by WLan over a Linksys WLan Router to the Network.
My Steaming Device is a Mac Mini with OSX 10.5.5 the Apple TV Boxes have Firmware 2.2.
In the streaming Mode (Movies in iTunes (Version 8.01) on the Mac Mini can be played on the MacMini without problems) i can see the Movie but i can't get any tone on the Apple TV Boxes.
Also if i want to play the movie on the Mac Mini and want to stream only the tone to the Apple TV Boxes i get no tone there too. Can sombody help me ?????

Hy with no tone i mean no Audio signal. I can see the Movie but without any audio signal.
The Audio Streaming (Music streaming) works i can play my i Tunes Audio Mediafiles with audio Signal and i can playback them also from iTunes in the Multi Speaker Mode but when i play Movies or stream Movies i get no audio signal. ?????????

How to enable chunked streaming mode using OSB config file

Hi All,
Is there way through which we can enable and disable the chunked streaming mode option in Business service (of OSB) through OSB configuration file?? If yes, please let me know.
Thanks,
Aditya

Hi Aditya,
I don't think it can be done dynamically the way you described... But I believe you can create two business services, one with chunked=on and the other with chunked=off and route to one of them dynamically according to your configuration...
Cheers,
Vlad

Instance Label in Stream Mode and Different Preference with Same Portlet

Hi Guys,
I encounter some problems need your help,
1. When I use Stream mode, and add a portet, but there is no way to changed instance label, if it's possible to change instance label in Stream mode
2. I have one portal, and there are some instances of one portlet inside, I just want to set preference to every instance, so portlet can do different work, how to do it?
Thanks,
Jing

When I did the second last production upgrade I used the import facility. Breadcrumbs and templates did not link up to the pages correctly. It took me quite awhile to fix all the problems that were found.
When I used the import facility for the last production upgrade I kept primary key violations on varying wwv.Flow tables. I used the same process that I had always used to do upgrades. I got in contact with the company that is paid to give us support on Oracle issues.
They said that the problem was that the size of the sql file created from the export was causing the problem, that it had gone over the HTMLDB 2 limits of 64K.
We then used the flows_020000 account to upgrade the production application. That fixed all the problems that I was experiencing.
So to install at the new district with the situation as described in the original question I need to change the application number. That is why I thought of changing the application number if the sql export file.
This is causing me a fair few headaches so any help and ideas are really appreciated.

Abort of a OCILobRead() (streaming mode)

I have a problem on canceling a sequence of OCILobRead() calls. They are in streaming mode, setting the amtp parameter to 0, and calling it over and over again as long as OCILobRead() returns OCI_NEED_DATA.
According to the documentation, a sequence of those calls can be aborted with OCIBreak(), but this does not work in my case. The OCIBreak call returns without error, but the next OCI operation on that connection fails with:
ORA-03127 no new operations allowed until the active operation ends.
I tried it in both blocking mode and nonblocking mode, but the resulting error is the same.
Any help would be appreciated.

I tried that, but it doesn't work too. I dont get the mentioned error ORA-01013, but the additional OCILobRead returns again OCI_NEED_DATA.
It seems that the OCIBreak had no influence at all on the sequence of calls.
I extracted the code to a small test program, maybe i missed something during initialization (mode???), or statement prep?
#include <string.h>
#include <stdlib.h>
#include <stdio.h>
#include <oci.h>
static OCIEnv*     oci_env     = NULL; // Environment handle
static OCISvcCtx* oci_svcctx = NULL; // Service handle
static OCIServer* oci_server = NULL; // Server handles
static OCIError*   oci_error   = NULL; // Error handle
static OCISession* oci_session = NULL; // Session handle
static OCIStmt*    oci_stmt    = NULL; // Statement handle
void checkerr(sword status)
switch (status)
    case OCI_SUCCESS:
      break;
    case OCI_SUCCESS_WITH_INFO:
      printf("Info - OCI_SUCCESS_WITH_INFO\n");
      break;
    case OCI_NEED_DATA:
      printf("Info - OCI_NEED_DATA\n");
      break;
    case OCI_NO_DATA:
      printf("Info - OCI_NODATA\n");
      break;
    case OCI_ERROR:
      text errbuf[1024];
      sb4   errcode = 0;
      OCIErrorGet(oci_error, 1, NULL, &errcode, errbuf, sizeof(errbuf), OCI_HTYPE_ERROR);
      printf("Error - %s\n", errbuf);
      break;
    case OCI_INVALID_HANDLE:
      printf("Error - OCI_INVALID_HANDLE\n");
      break;
    case OCI_STILL_EXECUTING:
      printf("Info - OCI_STILL_EXECUTE\n");
      break;
    case OCI_CONTINUE:
      printf("Error - OCI_CONTINUE\n");
      break;
    default:
      break;
void logon(char* user, char* pass, char* host)
// allocate environment handle
checkerr(OCIEnvCreate(&oci_env, OCI_DEFAULT, NULL, NULL, NULL, NULL, 0, NULL));
// allocate error handle
checkerr(OCIHandleAlloc(oci_env, (dvoid**)&oci_error, OCI_HTYPE_ERROR, 0, NULL));
// allocate server handle
checkerr(OCIHandleAlloc(oci_env, (dvoid**)&oci_server, OCI_HTYPE_SERVER, 0, NULL));
// allocate service context
checkerr(OCIHandleAlloc(oci_env, (dvoid**)&oci_svcctx, OCI_HTYPE_SVCCTX, 0, NULL));
checkerr(OCIServerAttach(oci_server, oci_error, (text*)host, strlen(host), 0));
// set attribute server context in the service context
checkerr(OCIAttrSet(oci_svcctx, OCI_HTYPE_SVCCTX, oci_server, 0, OCI_ATTR_SERVER, oci_error));
// allocate session handle
checkerr(OCIHandleAlloc(oci_env, (dvoid**)&oci_session, OCI_HTYPE_SESSION, 0, NULL));
// set attributes username and password in the session context
checkerr(OCIAttrSet(oci_session, OCI_HTYPE_SESSION, user, strlen(user), OCI_ATTR_USERNAME, oci_error));
checkerr(OCIAttrSet(oci_session, OCI_HTYPE_SESSION, pass, strlen(pass), OCI_ATTR_PASSWORD, oci_error));
// begin session
checkerr(OCISessionBegin(oci_svcctx, oci_error, oci_session, OCI_CRED_RDBMS, OCI_DEFAULT));
checkerr(OCIAttrSet(oci_svcctx, OCI_HTYPE_SVCCTX, oci_session, 0, OCI_ATTR_SESSION, oci_error));
void logoff()
checkerr(OCISessionEnd(oci_svcctx, oci_error, oci_session, OCI_DEFAULT));
checkerr(OCIServerDetach(oci_server, oci_error, OCI_DEFAULT));
/* free handles */
if (oci_session)
    OCIHandleFree(oci_session, OCI_HTYPE_SESSION);
if (oci_svcctx)
    OCIHandleFree(oci_svcctx, OCI_HTYPE_SVCCTX);
if (oci_server)
    OCIHandleFree(oci_server, OCI_HTYPE_SERVER);
if (oci_error)
    OCIHandleFree(oci_error, OCI_HTYPE_ERROR);
if (oci_stmt)
    OCIHandleFree(oci_stmt, OCI_HTYPE_STMT);
if (oci_env)
    OCIHandleFree(oci_env, OCI_HTYPE_ENV);
int checkout()
text*          select = (text*) "SELECT blob_obj FROM te_rblock WHERE te_rblock.obj_id = '301000xxx:1:1'";
OCIDefine*     oci_define;
OCILobLocator* oci_lob;
ub2            oci_ind, oci_rlen, oci_rcode;
checkerr(OCIHandleAlloc(oci_env, (dvoid**)&oci_stmt, OCI_HTYPE_STMT, 0, NULL));
checkerr(OCIStmtPrepare(oci_stmt, oci_error, select, strlen((char*)select), (ub4)OCI_NTV_SYNTAX, (ub4)OCI_DEFAULT));
checkerr(OCIDescriptorAlloc(oci_env, (void**)&oci_lob, OCI_DTYPE_LOB, 0, NULL));
checkerr(OCIDefineByPos(oci_stmt, &oci_define, oci_error, 1, &oci_lob, 0, SQLT_BLOB, &oci_ind, &oci_rlen, &oci_rcode, OCI_DEFAULT));
checkerr(OCIStmtExecute(oci_svcctx, oci_stmt, oci_error, 1, 0, NULL, NULL, OCI_DEFAULT));
ub4       offset = 1;
ub4       amount = 0;
const ub4 PIECE_SIZE = 128;
ub4       piece_len = PIECE_SIZE;
char      piece[PIECE_SIZE + 1];
int       counter = 0;
sword     ret = OCI_NEED_DATA;
while (ret == OCI_NEED_DATA)
    checkerr(ret = OCILobRead(oci_svcctx, oci_error, oci_lob, &amount, offset, piece, piece_len, NULL, NULL, 0, SQLCS_IMPLICIT));
    // if we dont interrupt it, everything is ok
    if (++counter == 5)
      checkerr(OCIBreak(oci_svcctx, oci_error));
      break;
checkerr(OCIHandleFree(oci_stmt, OCI_HTYPE_STMT));
oci_stmt = NULL;
return 0;
int main(int argc,char* argv[])
if (argc != 4)
    printf("usage: %s <dbuser> <pwd> <db>\n", argv[0]);
    return -1;
logon(argv[1], argv[2], argv[3]);
// first checkout works fine
checkout();
// second time ORA-03127 occurs!!
checkout();
logoff();
return 0;

SQL Exception not in streaming mode

Hi friends
I am using oracle driver and I am getting this error on queries very randomly.I am using Oracle8i 8.1.5 on NT machine.
SQL Exception not in streaming mode
Can anybody explaing why and when this error gets generated and what is the solution for it.
Please contact me at the following emailids
[email protected]
[email protected]
null

What do you do with the connection before the prepareStatement()? Is your program small enough to post here (use [code]...[/code] tags)? Do you have multiple threads that try to use the same connection simultaneously? Do you work with Long, Clob or Blob columns? What JDBC driver version?

My images look "choppy" in coverflow mode.

Hey everyone,
I recently noticed that any new designs I save are showing up "choppy" in coverflow mode. They look pixelated and they don't adjust like the other images I have in my folders. It's only happening to new files. i.e. I'll design something in Photoshop or Illustrator, save as jpeg and/or PSD/AI file, open up the folder and the image is ratty. It's so strange cause when I downloaded an image from the internet to do some more investigating, the image turns out great and it looks completely fine when I view in coverflow mode.
I hope this all made sense. Help! I can't preview my images looking like this anymore!
Thanks in advance!!

this could happen if you are saving image files with custom icons. they may look bad in coverflow if they are too small. I don't use photoshop but I know it has an option to save with or without custom icons attached. choose the latter.

Mic sounds choppy

installed 3.1 and the mic sounds choppy and static any ideas or other drivers i can download?

There already is a thread discussing mic quality on the first forum page.

Struts / Page Flow - forwards to home page in streaming mode

I have a pretty complex page flow with several actions and several forwards. The
page flow is using struts validation (using the xml file). It is also user the
Portal User Controls.
Everything works fine in .portal file. However, in streaming mode, from a jsp
when I click on an netui:anchor, the action gets executed, but then it redirects
to the home page, not to the page which has the portlet.

More info: I can place a page component on my page flow diagram but I cannot place any other components. They won't display. Placing the page component on the diagram does not put code into the source file. Also, I get the following compile error: Error(1,1):<Line 1, Column 1>:XML-20108:(Fatal Error) Start of root element expected.
Thanks!

NI-8452 Stream Mode more than 64bits?

I hava an SPI ADC which I want to read using the stream API for high conversion rates (using the NI-8452) but want to read back all 7 ADC channels in one multi-read SPI command. The maximum number of bits that the stream API seems to support is 64 bits where I need to really read out about 232 (7 x 32 + 8 for the read command). Is there any way around this?
I use the stream mode to detect a DRDY event, but once a single channel is read the output on the ADC chip is reset (so subsequent interrupts will only be generated on new data).
Seems fairly limited otherwise.
Solved!
Go to Solution.

David,
The payload that you are trying to stream is not a standard for SPI. We try to follow the SPI standards and give you up to 64 bits to stream at a time. If you cannot split your reads into separate 64 bit reads, you will be unable to perform this operation with the 8452. If you had some other interface, such as FPGA, you my be able to implement a custom SPI protocol on the FPGA. With the 8452, however, you do not have these options.

My Motorola S9-HD bluetooth headphones sound choppy and sometimes change the pitch of the song that I play on my MacBook Pro, how can I solve this?

I have been using this on my iPod touch and my iPod Classic and they have worked fine without any of these problems. But when I connected it to my Mac it took a couple of trys to play it and now it sounds choppy eve though I sit right beside it, it also like i said above changes the pitch of the songs that i play.

whatwasit wrote:
I guess the question is who else has had this problem, and is their a solution other than power cycling the iPhone?
I gwet the same problem wit my pair, especailly when I'm running. If the phone is in my pocket it can cut out quite frequently during my runs.
To be honest I get this with my 3GS and I got it with another headset on my 3. iOS4.0.1 hasn't fixed it for me either
I'd assumed it was a problem with the location in my pocket. I can have it on my desk at work and walk into anotehr room 30 or 40ft away with no problems with my headphones so it does seem odd it can't cope with going through my body at 2 to 3ft.
I've just always lived with it, but glad to hear you think it could be a s/w glitch as that gives me hope

Audio sounds choppy/skipping

I just bought my hp laptop about 3 weeks ago and every time I try to listen to music on pandora or on youtube the audio sounds choppy or like its skipping. I dont understand why because this laptop is brandnew and has never been dropped or mistreated. Please help

If your OS is Linux it happens on some hardware by HP (my soundcard is ALC282).
I put this line in /etc/modprobe.d/alsa-base.conf according my soundchip model:
options snd_hda_intel vid=1022 pid=780d model=auto enable_msi=0 index=0
The key is enable_msi=0. With this option no more any choppy/skipping issues.

Sound choppy in Stream mode.

Similar Messages

Maybe you are looking for