Sound cuts off after 1 minute. Wireless HPs Model: TMR-RF985R

I replied to a topic regarding the same issue, but will make a thread about it as the problem is urgent (I need noise cancelling sound for a symptom I suffer from) and of course I use these headphones almost 24/7 as my work/lifestyle relies heavily on them.
THey were working fine for roughly ~ 2 years until recently when I started noticing that they shut off after some use. I used to think it was the batteries, but I charge them for 15 hours every night just as I always have, so that can't be it. Everything is plugged in. I've lurked over threads discussing the same problems all over the net and applied all their inputs to no avail.
Any help is MUCH appreciated - any help that would actually work! My gut says these headphones are on their way to the grave.
Thanks in advance
Solved!
Go to Solution.

Argh now I'm ransacking the entire internet to figure out how I'm supposed to get to the batteries on these headphones. Any help would be appreciated... (I know it's quite a newbish question, but what the he11, given the stealth on this thing!)
UPDATE: I guess there is no option to replace the batteries without sending it over to the manufacturer??? That's kinda imprudent IMO but maybe I'm missing something (?). So I have to pay an additional fee including shipping for something that I should be able to do free of charge minus expenditure on batteries.

Similar Messages

All of my songs cut off after 4 minutes and go to next song

all of my songs cut off after 4 minutes and go to next song. any advice?

https://discussions.apple.com/thread/3712298 - applying system update cleared issue of songs ending early

Video problem - sound cuts out after 29 minutes.

I have put some TV shows from my computer onto my iPod but after 29 minutes, the sound cuts out and I am left with just the video. If I skip past 29 minutes, the screen goes black for a second, then returns to the previous menu.
My iPod is a 30GB 5G with iPod Software version 1.2.
I used iTunes 7 and tried 7.0.1 to copy the videos to my iPod. They play fine on the computer.
I have put films (1hr+) on before and they have worked fine, however that was with iPod software 1.1 and an older version of iTunes.
Any ideas?

Well sounds like the TV shows had transferred errors. Have you tried reloading them?
Also make sure the Frame rate, and Audio rate are working ok. You will know if they are not, if voice and video are off even slightly. Also how long are the TV shows? 30 Min? If they are, then it may just be a corruption or skipped of the last min or few seconds, because the video is ending. That would explain the black screen. It does that after the video finished and it goes back to the last screen. So it just may have not copied the last few sec of the video, that happens sometimes. Try reloading it again!
Also if that does not work, try resetting the Ipod. I would hate for you to “Restore” your Ipod for just 30-60 sec of lost sound of a TV show. Especially if everything else if working well.
Best of luck. Don’t forget, if this post helped you, click Solved or Helped at the top of the post. It makes our rank better!
Have a great day, and hope you fix your problem.
P.s. it could just be that your Tv shows End at 29 min-ish as well IDK?
God life

Sound drops off after 15 minutes after upgrading from windows 7 to Windows 8.1.

I upgraded my PC from Windows 7 to Windows 8. Then, from Windows 8 to Wimdows 8.1. When playing a Movie I've downloaded from iTunes it plays normally for a good while. Then, after 15 minuites or so the sound drops off. If I close and reopen iTunes it plays again for about the same time. I had to do that five or six times to get through a movie. I've tried installing the latest sound drivers, uninstalling and reinstalling the latests iTunes with no luck fixing the issue. I have my PC connected to my TV via HDMI cable. Any suggestions?

Hi,
You could download and install the trial version of Photoshop Elements 12.
For your serial number, try this:-
Go to Adobe.com and there should be a button to Manage account - click on that and sign in with your Adobe Id.
Click on View All under Plans & Products
Click on View other products
After a short while, you should see your Photoshop Elements appear and you can expand it to see your serial number.
The serial number can be entered into the trial version to activate it.
Do you have your catalog and images?
Brian

Call cut off after 1 minute

Hi,
I have Cisco AS5350 IOS version 12.2(13)T. This gw is doing origination. My termination gw is Vocaltec and Cisco AS5300. When my customer call to my terminating gw, they can hear the opposite party but after 1 min, the call cut off by itself. I have check with my both providers and they say they recieved normal end call from their log file. They suspect that its from my gw. Is there any ways to check and any solutions?

If you have already checked with your provider and they said that everything looks ok, I would suggest opening a TAC case so an engineer can double check your config.

Why does windows media player cut off after 4 minutes?

I use safari and like to listen to some radio from the internet that uses windows media player on my G5. I updated the media player recently and now it quits after four minutes no matter what media is playing. I do not have windows media on my other machine and VLC opens automatically whenever I click on a stream in my browser... and it never quits or has any problems and is remarkably faster than the windows player. How do I change the settings in Safari so that it will use VLC to automatically open any of those media files instead of media player??
I did download Flip4mac but it does not seem to be helping!!
thanks
kt

Your More system details list show the WMP plugin (np-mswmp), so that should be working.
See:
* http://kb.mozillazine.org/Testing_plugins
* http://www.vdat.com/techsupport/windowstest.asp

Why does my airplay cut off after 5 minutes of use?

Any time here lately when I connect my mac book to my apple tv, it will play a few minutes of pandora or itunes that after about 2 songs or so, its stops playing on the tv and contiues on the computer then skips a song, almost like it froze and skips to the next song. I've tried retarting reseting my apple tv, nothing seems to work, not to mention its up to date. Any suggestions?

It may be that your Computer Sleep preferences are causing the problem. I had the same problem and extended my Computer Sleep time from 5 minutes to 3 hours. Try extending your maximum time before sleep to a longer time under System Preferences > Energy Saver > Computer Sleep.

Why does audio in Tremolo and Legato mode cut off after 3 or 4 seconds???

Question regarding the symphony orchestra section when it comes to bass, string, cello, viola in Tremolo and Legato modes: why does the sound cut off after 3 seconds.
Let's say you have Viola, Tremolo section selected, how do you make the sound not cut off after 3 seconds. What if you want it lasting 6 or 7 seconds???
Can you override that limitation???
Thanks very much in advance,
- Nicholas

Most likely a network issue. Power cycle the router.
Disable any firewall on the computer, if issue is using AirPlay from a computer.
Ensure the router is running the most current firmware.
If the ATV is connected via Wi-Fi, try ethernet.
Change the Wi-Fi channel if ethernet is not an option.

Onboard Sound Cuts out after a while - anyone know why?

Hiya peeps,
Ever since I bought my MSI motherboard, the onboard sound has been a bit dodgy. Whenever I play games like UT2004 or halflife, the sound cuts out after several minutes of play. It only comes back again if I restart the game, but then after a few minutes it will cut out again. Anyone else experienced this?
I have tried altering all the game settings from safe mode sound drivers to full EAX H/W accelerated but this has made no difference to the stability of the audio. I have been updating all the drivers to my system as and when MSI live update picks them up, os I am up to date on that front. I have a lot of decent kit (PSU etc) in my machine and its not overclocked in any way at all. Also I have the most up to date direct x too.
My system spec is below, please help chaps.
PS im trying here as MSI have not responded to any of my email queries about this problem.
Regards,
MrG.
CPU: P4 2.8E Prescott 800FSB (200MHz * 14.0) HT Enabled
MEM: 1GB Corsair XMS3200C2PT Platinum CAS2
MTB: MSI 865PE Neo2-PFISR (MS-6728) Bios V3.7
GFX: GexCube Radeon 9800 Pro
HDD: Hitachi Deskstar 7K250 120GB ATA-100 8MB
PSU: Enermax EG465AX-VE(G)(FMA) 460W
OS : WinXP SP1, all drivers up-to-date and Liveupdate up-to-date
Nothing is overclocked and all BIOS setitngs are set to the defaults.

I had the same problem, this is how i fixed it:
Uninstall everything relating to the drivers for your sound from both the control panel AND the device manager, do not let windows PnP install ANY drivers. Then manually install the latest drivers, not from live update, but from MSI's website, then run the installer package. Make sure you reboot at every step, since that's what I did, and no more sound cut-out.
See, we have many of the same specs in our computers, this is probably the same issue I had.

I downloaded an album and every single song is cut off after about a minute and a half.

I downloaded an album and every single song is cut off after about a minute and a half. I checked the Help information, but there isn't a button visible to download it again. How can I fix that?

I have a problem too - may be related to this. I downloaded 5 albums over the weekend, plus a few singles. Every one of them has at least 1 song that stops playing partway through, some as quickly as 5 seconds in. Looking at the file itself, the size seems right for a song of that length, and I got no errors during download, but out of the ~75 songs I purchased over the weekend, I have 10 (so far, still checking) that are incomplete

IPod cuts off after 12-15 minutes of running.

iPod cuts off after 12-15 minutes of running. I'm using the Nike+ app. This happens frequently..

Hi Chris,
I have never used font management software/plugins, I use font book to validate my fonts. I have used imagenomic's noiseware for 32bit in the past but it is disabled as I am running in 64 bit. I do not use a lot of plugins etc. I did install the optional extention plugins from adobe when trying to solve the issues I have been having.
I finally installed a firewire 800 harddrive to use as a scratch disk, I realize this is not ideal, but I am limited with my iMac. I used it last night for around 7 hours and everything seemed to be working much better, my efficiency never dropped below 90% and I was able to flip my canval horizontal for the first time in months without receieving an error. I am hoping this is a longterm solution, howver I do not know why moving my scratch disk would affect my memory usage/efficiency.
Thanks!
Sharon

G570 SOUND CUTS OFF WHILE ON EXTERNAL SPEAKERS

I own a G570, bought 2 weeks ago. I have noticed that while listening to music connected to my external speakers after a minute or so, the sound cuts off but the media player still playing. The same behaviour repeats itself when usin both Windows Media Player or VLC Media Player. i have not ried any other media player.
Any ideas would be much appreciated.
Thanks!!!

try to update sound drivers and maybe bios from the link below:
http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_list.aspx?CategoryID=130485

Video playback audio cuts off after few second

Pictures are fine but audio cuts off sometime around 5-10 seconds for the entire duration of the video unless you skip the video further a few seconds where the sound cuts off,audio are back but only for maybe 1 or 2 minutes then if you repeat the same step audio are back but again for only a few minutes,only occurs when not using headphones,but when I am using headphones video and the audio plays fine for the entire duration of the video.It annoys me as I don't usually use earphone.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all videos and resync/redownload
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Two Problems:MSN Won't Download, Display Shuts Off After 1 Minute

Hi ok so i have two problems, I had MSN 6.03 for a while but last night it just stopped opening, so I deleted it and tried to redownload, but when i try to download it, it says "failed to mount" every time.
The second problem is the display shuts off after 1 minute, I went to the energy saver and i changed it to 15 minutes an I locked it, but when i exit out of the energy save it goes back to 1 minute HELP!!!

Sounds like you have either cache, finder, or disk corruption problems. Follow the steps here:
http://www.thexlab.com/faqs/repairprocess.html

MPEG2-DVD / Sound cut off *urgent*

Hi everyone
I have a very urgent problem which makes me lose my hair...
We have 190 minutes of 1920x1080 25p footage which we edited in Premiere Pro.
I then proceed to export the files into MPEG2-DVD using 2-pass VBR with 1,65/4,2/6.25 bitrate (according to an online bitrate calculator).
I multiplex the sound into the MPEG-2 file.
When I import the timeline into Encore, it correctly tells me "do not transcode".
BUT the sound cuts off short of the video. It does it for every chapter. I cannot 'extend' or 'pull' the sound to the length of the video.
First chapter is 24:19, sound cuts off at 23:15.
Anyone got an ìdea what I am doing wrong?
Any help is greatly appreciated!
Michael

I'm in complete agreement with Jeff here as well - selling PAL discs in the US will sooner or later cause problems.
Priobably sooner.
In the old days you would not get the player to even load them - it would throw a "no disc" or another error of some description - and even when you did find the odd rare one that would load them, the TV systems would make sure you got a garbled image, or a B&W one. These days a good Universal Player will usually load all types (although again a regular DVD player will most likey still not go for it) but you will still have TV system issues.
The problem is the mains frequency - PAL (Europe) uses 625 lines and 50Hz whereas NTSC uses 525/60, which effectively means PAL runs at 25 frames/second & NTSC at 30 frames/second. The 2 are incompatible. Most PAL players can handle both formats either by outputting NTSC discs as PAL-60 or even genuine "on the fly" conversions to 525/60 NTSC. The process is not straightforward either - the player is handling scaling, temporal conversion and object motion analysis all at once (Hence why most PAL setups output NTSC as PAL-60 instead of pure 525/60 NTSC) and additionally the audio speed must be adjusted (remember DVD is a multiplexed set of VOB files, not separate streams) to conform to the different display rate - which may also prevent the use of a digital connection!
This type of conversion is much, much less compatible the other way around. Most NTSC players still cannot play PAL discs (although as I have said a Universal BluRay player may do this) and only a very small number can convert 625/50 PAL to 525/60 NTSC.
Let us now talk about MPEG audio & why it is not recommended to use it. This gets complex.....
MPEG audio is a multichannel format using perceptual encoding at 16-bit 48KHz. MPEG-1 Layer II and MPEG-2 BC (backwards compatible) are the only allowed forms and the MPEG-2 that is allowed - BC - is a matrixed format, not discrete, in surround use. Use of this type (MPEG audio) was only ever optional in NTSC, never mandatory (so that is one big problem) and the other big problem is that MPEG-2 audio is only allowed in BC mode. Why is this evil? Take a seat & let me try to go through it.
Because MPEG-2 audio decoders were not available at the time of DVD introduction, MPEG-1 was the only decoder available so that was what got used. As a result, the only permissib;le type of MPEG-2 allowed is BC, which is a matrixed stream type (the 5 main channels are matrixed into Lt/Rt stereo streams) and then encoded in the normal MPEG-1 Layer II format for DVD. The advantage to this is that a multichannel stream can be phase matrix encoded so that it will also play on a stereo system. MPEG provides pre-determined matrixing formulas depending on the intended audience - one is a conventional stereo signal, another is designed to deliver a Dolby Surround compatible (*not* Dolby Digital - that is something very different) system that re-creates the centre channel fronm the left/right channels in addition to a single rear (or surround) channel (Nerdy Note - this is actually a development of the old SQ Quadraphonic matrixing system, set up for LCRS instead of L-R-Ls-Rs). Additional discrete channel information, plus the LFE channel, is encoded in an extension stream so that an MPEG-2 decoder (not MPEG-2 Audio) can recreate 6 separate signals. Because of the necessity to be backwards compatible with MPEG-1 decoders the centre & surround channels that are matrixed into the 2 MPEG-1 channels (left & right) are duplicated in the extension stream. This allows the MPEG-2 decoder to subtract those signals from the matrixed signals, leaving the original Left & Right channels. All this adds an overhead of approximately 32kbps, making it rather inefficient.. The original 2-channel MPEG-1 encoding process was not developed with matrixed audio in mind and therefore may actually remove surround detail. Also, the process tends to expose coding artefacts as well so coupled with the whole shebang only ever being optional in NTSC 525/60 systems means that to use this as your solitary stream type is actually out of spec for 525/60 regions & players may well take one look at the disc & output...................in short, just a picture. And if that picture is 625/50 PAL, quite possibly not that either.
Audio support in DVD.
MPEG-2 audio is basically not supported except in BC moide, which hands everything over to MPEG-1 decoders. This is not good. It is not efficient, it can be riddled with artefacts & it is not supported by fiat in NTSC regions, only optionally. If it is your sole stream you will run into trouble sooner or later.
I hope this helps, and I think I will go away & write a little article about this as it keeps cropping up every so often..

Sound cuts off after 1 minute. Wireless HPs Model: TMR-RF985R

Similar Messages

Maybe you are looking for