Sound device of Satellite A100-906 stopped working

Hi all..
the sound on my Satellite A100-906 just stopped working in winxp.
I didn't make anything like installing a program etc.
I verified that the drivers are installed properly but after that I just had it so I installed a fresh copy of winxp and installed the sound driver BUT it didn't work!!!
I just don't know what to do with it.
Please someone help me..

Hi,
maybe you have the wrong drivers. If you already tried it here:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
and the drivers didnt worked for you, then go to this link and download the drivers from that page:
http://209.167.114.38/support/Download/ln_byModel.asp
They should work. Background of that issue is, that the soundchip was designed for vista and not xp, so the drivers wont work and you have to use special drivers which could be downloaded in toshiba canada.
Greets

Similar Messages

  • The sound on my iPad 2 has stopped working....

    The sound on my iPad 2 has stop working.....no sound in app, home screen, no locking sounds, keyboard clicks, no music, no movies.....no nothing! I have reset settings, I have tried to reboot the iPad numerous of times, I have played with the slide rocker, switched settings back and forth and yet nothing. Is there anything I can do my son iPad is now 2 years old & out of warranty & apple care please help!

    With headphones?
    Speakers?
    Try:
    - Reset the iOS device. Nothing will be lost (done)
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings (Done)
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • The sound on my ipad 3 suddenly stopped working i dont know why i tried the last two days to fix it and also restored it and the sound never came back, please help.....

    the sound on my ipad 3 suddenly stopped working i dont know why i tried the last two days to fix it and also restored it and the sound never came back, please help.....

    Do you get sound on any apps e.g. Music and Videos but not others ? If you do then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • One keyboard button is broken on Satellite A100-906

    Hi guys,
    Few days ago i bought Satellite a100 906. As soon i got home, i found one keyboard button (the cap from the inner side) is broken (the M letter).
    Is it possible to order the keyboard buttons separately or only the full keyboard ?
    My local dealer said only full keyboard is avalible, but its just funny, that i should buy a new one keypad instead of one letter cap.

    Generally if the button mechanism is broken the whole keyboard must be replaced but if only the keycap is damage it should be possible to order the single keyboard key caps.
    The removing of the keycaps is not very tricky. Simply go under the keycap with the fingernail and remove the keycap.
    But I assume the warranty is valid therefore the service partner should do it for free.

  • Re: Windows Vitual PC with Satellite A100-906

    Hi,
    can I use Windows Virtual PC on my laptop Satellite A100-906? My CPU support virtualization but I cant install Windows Virtual PC.
    In BIOS I havent setting for virtualization enable.
    Thanks

    Hi
    As far as I know the notebook uses the CORE2 DUO T5600(1.83GHZ) CPU.
    According to the Intel page the VT is supported by this CPU:
    Check this:
    http://ark.intel.com/Product.aspx?id=27254&processor=T5600&spec-codes=SL9SG,SL9SP,SL9U3,SL9U7,SLA4E
    Therefore it should be possible to use the Intel Virtualization Technology.
    Update the BIOS and check if there is a option which could enable / disable the VT.
    Greets

  • Re: Does Satellite A100-906 supports firewire 400 or 800?

    Hi..
    I have a Satellite A100-906 and I want to ask, if someone knows if the i.LINK (IEEE 1394) connection in my laptop is the firewire400(a) or the firewire800(b) type ..Because I want to buy an external HD with firewire connection ..
    Thanks

    so... the possibility of the firewire connection of my laptop is 1394a (firewire400) ..?.. because the are cables with 6 pins (for 6pol port) which they used in firewire 400 connection ..(firewire400-400 Mb/s-transfer rate ...firewire800-800 Mb/s)
    ..i am a bit confused ..
    thanks again.. !

  • Satellite A100-906 cannot boot from CD

    Hi
    i have Satellite A100-906 and cannot boot from CD. I don`t now whats problem.
    I want recovery my pc but don't run cd boot and i tried another Windows CD and seems to be a same problem.
    I get DVD Super Multi drive _usb_ but not run same problem.
    Bios tool is default.
    plzz gef me answer
    thanx

    Hi
    You said you are using an USB DVD Super Multi drive??
    Sorry buddy but I think you will be not able to boot from external USB CD/DVD drive
    As far as I know BIOS doesnt support this!
    You have to use the use the internal CD/DVD drive if you want to boot from the disk!
    Greets

  • Since last update, sound on my Logitech Quickcam fusion stopped working?

    In iChat ,I noticed that since the last apple software update the sound on my Quickcam Fusion stopped working only the video works.. I noticed that under preferences, video, then microphone, it is no longer listed as a USB device option. Only line-in is present.
    I suspect it has something to do with the last software update from Apple. I think the details had mentioned that they changed something with USB security??
    I would like this camera to work since I just bought it and it was working 2 weeks ago!
    Thanks for any help.
    Mini   Mac OS X (10.4.10)   latest version of iChat AV

    New Audio Update toady for me.
    Although this was on my MacBook Pro that I have just reinstalled the OS on.
    (I can not find it in downloads. Strangely it has appeared after the 10.4.10 combo Update)
    It may also pay to start up GarageBand odd as it sounds.
    Also go to Applications/Utilities and open the MIDI Utility and make sure the setting is set to 44100
    10:06 PM Monday; July 2, 2007

  • Satellite A100-906 does not load Adobe Premiere Pro 1.5

    I have installed Adobe Premiere Pro 1.5 in my A100-906 Toshiba Notebook.
    While loading the Adobe Premiere Pro 1.5 a blue screen comes up and the system restarts.
    I assume that is a conflict with my sound card but if it is so, is there any solution?
    Thnx in advance
    Novip
    Ps. The Adobe Premiere 6.0 works fine

    Hi
    Its strange
    I have searched on the Toshiba knowledge website (you can fin it under Support homepage) and found something useful
    I dont know if this Toshiba technical support document wills help you but check this link;
    By executing Adobe Premiere Elements 2.0 the Notebook freeze or crash
    http://support.toshiba-tro.de/kb0/TSB6401FS0007R01.htm

  • Sounds on my iPhone 4s just stopped working

    I have had the phone for a few months and sounds just stopped working. I can still send and receive calls and hear ringtones but all other audio is gone including video, music, text alerts, etc.  help please. Resets and turning off Bluetooth have NOT worked.

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
    Have you tried ALL the troubleshooting steps?  If you have and you're still having problems, then you'll need to bring your phone into Apple for evaluation and possible exchange.

  • Since I installed a printer software Satellite L300 has stopped working

    Hello there!
    I'm new here so not really sure if I'm posting in the right place. Mods, please feel free to move to the relevant section, thank you.
    OK I have a Toshiba Satellite L300 Laptop and ever since I installed a printer software on Wednesday night, my laptop has suddenly stopped working!
    Ever since Thursday night, I have been trying to get it working but I'm faced with this message:
    when i load it up it goes to Windows error recovery:
    'windows has failed to start.a recent hardware or software change might be the cause
    if windows files have been damaged or configured incorrectly,startup repair can help diagnose and fix the problem.if power was interrupted during startup,choose start windows normally'
    then it gives two options: Launch startup repair (recomended)
    start windows normally
    ==========
    -so i click launch startup repair (reccomended)
    -then a scren loads up called 'system recovery options'.. it says: select an operating system to repair and click next.only windows vista operating systems are listed and can be repaired
    if you do not see your operating system listed, click load drivers to load drivers for your hard disks'.....
    but nothing comes up so i click load drivers and it just gives me loads of random folders...and i haven't a clue which ones to load
    ========
    5 years ago Report Abuse
    Additional Details
    so i just click 'next'
    ========
    then i have 5 options:
    -startup repair
    -system restore
    -windows complete pc restore
    -windows memory diagnostic tool
    -command prompt
    ==========
    startup repair says it cannot manually fix any problems
    -system restore just says your computer is in a limited state and performing this action cannot be changed...but there is no option to do so
    -windows comple pc restore says i need to insert a backup disk which I dont have
    windows memory diagnostics tool says that windows is preventing this
    ============
    but on the system resotre it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
    but i don't know where...i typed it in the command prompt but don't understand how to use it
    =========
    i also tried to click start windows normally but it won't work

    If the problem is installed software, start notebook in safe mode and try to start system restore from there.
    Please let me know which options are available. Can you roll back OS few days back?
    Are some restore points listed there?

  • Elvismx no device detected & Elvismx hangs and stops working

    Hi There,
    I bought a Mydaq, it is detected on device manager and  NI Max. However none of the devices from Elvismx is working, once it launches hangs.
    I am using windows 7, Home Premium 64 Bits
    The NI troubleshoooting utility stops working and gives me and error "Unable to locate labview run time engine"
    I have fully reinstalled the software several times
    Any ideas?
    Thanks,
    JoseV

    Status Update:
    I reinstalled the software suite again, but this time  have done I installed it under clean boot.
    After doing this the device manager shows the driver as: USB Flash Firmware Updater
    I have seen on:
    http://digital.ni.com/public.nsf/allkb/49A8EC95510360F586257B09005B7AB1
    "Solution:
    This is a known issue with USB cDAQ devices, USB X Series devices, and myDAQ. National Instruments has seen this issue with Renesas, Fresco Logic and ASMedia USB controllers, but other controllers may also be affected. If you are experiencing this problem or a similar problem, first check your USB cable connection to see if it is faulty. Otherwise, it is recommended that you update your USB Host Controller's driver. "
    I do have Indeed a ASMedia USB controller: ASMedia XHCI controller
    I have also tested the device with a different USB cable as the previous solution implies.
    What to do now???, please help

  • Hdmi sound on my mac mini has stopped working after I upgraded the OS

    I just upgraded the iOS on my Core i5 Mac mini to 10.8.5 and my hdmi sound on my monitor stopped working. I have tried rebooting and adjusting the Audio midi settings and nothing seems to work. I know the mac mini speakers are working and the monitors speakers are working. What do I try next?

    Resetting the NVRAM / PRAM, as per > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • Help, when i click device (iphone 4) on itunes stops working

    Since i updated to last itunes version when i click on device (iphone 4) itunes stops working and it get closed
    it only happens when i click on device
    i use windows 7, itunes 11.1.3.8 and iphone 4 ios 7.0.6

    Hello edurcluet,
    I found an article with steps you can take if iTunes stops working when you connect your iPhone:
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/TS3219
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • System sound (like when empty trash) miserably stop working in Lion 10.7.2

    I have upgraded to Lion10.7.2 on my Macbook Pro early 2008 Intel 15 inches, and the update went fine except one annoying problem I found so far.
    This problem also occurred in 10.7.0 and 10.7.1 and it seems that no fix has been made in 10.7.2
    The problem is when I drag file to Trash and empty it, there should be trash empty sound effect, and this has been with us since Tiger.
    In 10.7.2 it work as expected, but when I close the lid to get it to sleep, once I open the lid, the system sound is gone without no reason.
    When I play music from iTunes, or when I change volume level, the sound effects work as usual, but empty trash sound stop working miserable.
    I have to shut down, press Option-Command-P-R and power on to reset PRAM then system sound like empty trash come back. Again, afpr may be half a day, it's gone again
    Any friend here has solution for this? The com.apple.soundprefs.plist file, if you delete it, in Lion, it is not recreated again, and it's gone forever. SO delete plist file is not a solution.
    Help please

    I found a workaround to my problem accidentally.
    As the system sound like empty trash or file drag sound stop working miserably, after close the MBP lid to sleep, after it awake, system sound just stop working.
    Before this, I have to shut down my MBP, reset PRAM by press Option-Control-P-R and power on, to get the system sound back
    But I found that the workaround whenever the system sound stop working thad do not require reboot is:
    1. Go to System Preference-Sound
    2. Change Play sound effects through: Internal Speakers to Soundflower 2ch) in the drop down list.
        (Soundflower has been installed by a software called iShowU HD (screen capturing software))
    3. Slide to change Alert Volume from the original position
    4. Switch back to Internal Speakers from Soundflower 92ch) in the drop down list
    5. Change Alert Volume by moving slide bar back to the desirable position
    Immediately, the sound effects that stop working will start working again.
    This just work for my case. I don't know it will work for ther people that have the same problem as me or not.
    And if possible, can some expert here give me explanation why doing the above make system sound effect to work again? mI want to know the cause, and definite solution to the problem
    Advise and suggestion please. Thank in advance

Maybe you are looking for

  • How do I make a jar of netbeans (or anything big)?

    I was searching for a jar file of netbeans and instead found a different installation file per operating sytem. I am not complaining about this but I want to make a jar out of this (or another big problem) for the sake of learning how (a jar actually

  • DB Copy (MSSQL) between two SAP systems with different level and Components

    Hi, we have a SAP system release mysap 2004 SR1 and for "the upgrade project  to SAP ECC 6.0 " we installed a new mysap 2004 in a new hardware (sap03) where we have also solution manager running. The new installed Mysap 2004 SR1 is alos running fine

  • Cannot connect to itunes/windows help please!!!

    Hi, I have a 8gb ipod touch i brought it in australia and now im back in england, i cannot seem to connect to itunes, when i plug the cable in it makes the noise to say its connected and then the ipod camera window pops up but still doesnt connect to

  • By the way, forgot to tell...

    looking through /tmp/81502.log after applying the patch, i found some mv: <my $ORACLE_HOME>/bin/lsnrtcl : No such file or directory, and some other similars though it wrote me that the patch was successfull still, any ideas?

  • I would like to know what is the best product to create a survey

    I would to create a survey on a Web Site of multiple choice answers and each answer has a value and the score is displayed on screen. I have managed to create a form in Google Forms and I can give each answer a value and create a total however I can'