Sound difference between an ipod classic 160gb 2009 and an ipod 80gb

hi
iv had my ipod classic 80 gb since 2007 and just a couple of weeks ago i bought a pair of dr dre headphones solos and i tried them out on an ipod touch and the sound is much better and i was wondering if the sound would be better is i bought the newest ipod classic?

I have the Dr Dre beats headphones as well. I have the 160GB iPod Classic (2007) and I have the 64GB 3g iPod Touch. I think that the sound out of the iPod Classic is crisper and cleaner than the sound out of the iPod Touch. I did this comparison using the same settings (Equalizer was OFF) and same bit rate etc. The difference between the two machines was not great either however it was noticeable.
When you compare the two with your Dr Dre Solos are you using the same sound settings on the two iPods? Ensure that the Equalizer is either turned OFF or the same setting is used on both. The other thing is to check and see that the music that is used to compare with is using the same bit rate. In other words make sure that you comparing apples to apples.
Axel F.

Similar Messages

Is there any differences between a iPod nano 1st gen usb cable and a iPhone 3G usb cable? thanks

Is there any differences between a iPod nano 1st gen usb cable and a iPhone 3G usb cable? thanks

Yes you have a one year warranty from the date of purchase from Apple. Go to this link and on the bottom right hand side it will ask you to enter your serial number and will tell you if you are still under warranty. http://www.apple.com/support/
If you are you can take it to a Apple store, or request service online here http://depot.info.apple.com/ipod/
If it is out of warranty you can google a third party service provider and get it serviced out of warranty. There are two that I know of that provide free diagnostic service. You only pay for shipping and they will tell you what is wrong and what it will cost to fix. They are ifixipodsfast.com and ipodmods.com but there are others also (I just have no experience with them) Good luck and as was stated it should charge from your usb. and just for grins, look at the docking connector on your ipod and see if there is any obstruction that is obvious.

What is the difference between the ipod touch 3rd and 4th generation

what is the difference between the ipod touch 3rd and 4th generation

http://www.everyipod.com/ipod-faq/differences-between-4th-gen-ipod-touch-3rd-gen -ipod-touch.html
http://support.apple.com/kb/ht1353

What is the difference between the iPod Touch and the iPod Touch MP3 ?

What is the difference between the iPod Touch and the iPod Touch MP3 ?

There is no iPod touch designated as the "iPod Touch MP3". If you've seen that listed somewhere, it's just a rather misleading title given by the dealer or web site, not an Apple product name.
Regards.

HT1384 Is there a difference between an IPod USB cord and an IPhone USB cord?

Is there a difference between an IPod USB cord and an IPhone USB cord?

Guy would this be of any help:
To start up your computer in Apple Hardware Test:
Press the power button to turn on your computer.
Press and hold the D key before the gray startup screen appears. If Apple Hardware Test does not start up, see the Additional Information section at the end of this article.
Note: Some Macintosh computers that shipped with OS X Lion support the use of Apple Hardware Test over the Internet. These computers will start up to an Internet-based version of AHT if the hard drive does not contain AHT. An Internet-enabled connection via Ethernet or Wi-Fi is required to use this feature.
It takes a minute or so for Apple Hardware Test to start up and inspect your hardware configuration. While this is taking place, an icon appears on the screen:
When the process is complete, select your language and click the right arrow. If you aren't using a mouse, you can use the up and down arrows to select a language and then press the Return key.
The Apple Hardware Test console appears. You can choose which sort of test or tests to perform:
To perform all of the basic tests, click the Test button or press the "T" key or the Return key.
To perform a more thorough diagnostic test, select the "Perform extended testing" checkbox under the Test button before you click the Test button.
Your test results will appear in the window in the bottom-right of the console.
To exit AHT, click Restart or Shut Down at the bottom of the window.

Is there any difference between the iPod and the iPod hp?

I'm new to iPods so forgive me if this is a foolish question but I've been thinking for a few weeks now about getting my daughter the shuffle. I bought the 1gb iPod shuffle hp today in Staples because they had it on sale but I'm wondering if there's any drawbacks to buying this one compared to buying it directly from Apple? As far as the electronics, is there any difference between the iPod and the hp iPod?

Welcome to Apple Discussions!
Electronically, there is no difference. The only difference comes in support. Apple allows you to call them for 90 days and one issue after you buy them, supporting windows and macs. HP will only help you if you are using a windows, however that support lasts one year. Keep in mind that if you need support, you'll have to go to an HP authorized repair center or another one of HP's options as the apple repair site and apple stores can't help in that regard.
btabz

Is there a sound difference between iphone 4 and 4s

Is there a sound difference between iphone 4 and 4s

Don't know what it means.
Are you listening to the iphones speaker or through earbuds?
Is something blocking your speaker?
Is the volume turned up?
Have you tried a restart?
Reset?
Restore?

HT1351 Two days ago most of my music dissapeared from my Ipod, however all of it is still in my iTunes Library. After synchronizing the Ipod there is ahuge difference between both music inm my library and the one in the Ipod.

Two days ago most of my music dissapeared from my Ipod, however all of it is still in my iTunes Library. After synchronizing the Ipod there is a huge difference between both music in my library and the one in the Ipod.

Hi Rodobaldo,
Let's try to clear up this issue for you, I'd like to clear out the music on your iPod first. You'll want to find the Sync Music Checkbox, uncheck it, then Apply or Sync:
Once you have done that, recheck the "Sync Music" checkbox, and apply the changes once more. This will instruct iTunes to completely remove all music from your iPod nano, and then copy the files once more. If you have a large amount of music, this initial sync may take a while.
If the above does not resolve your issue, see the following article:
iTunes: Syncing media content to iPod
http://support.apple.com/kb/HT1351
Thanks,
Matt M.

Difference between using app server connection pooling and using the driver

Hi all,
How to get connection pooling with out application server and tomcat also?
What is the difference between using app server connection pooling and using the driver supported connection pooling?
Regards,
Murali

maybe the performance of App server pool is better than the JDBC pool,
for you don't know wether the implementation of the JDBC interface is good or bad.

What the difference between u0093Valuate GL Account Open Itemsu0094 and u0093Valuate G/

hi gurus
What the difference between Valuate GL Account Open Items and Valuate G/L Account Balances?
We found out that when we perform valuate GL account Open items there will be reversal done at the same time whereas when we perform Valuate G/L Account Balances there is NO reversal posting even though we hv entered the reversal posting date and Period.
Pls advise which one we should perform?

Valuate GL Account Open Items are for open item managed accounts including vendor/customer accounts. The valuation is performed for each (open) line items on key date specified.
"Valuate GL Balance" is for account NOT managed on Open Item basis but managed in foreign currency. The period balance of key date in foreign currency is valuated. Reversal document can be created by selecting 'Reverse postings' in "Postings" tab.
Kyoko

Difference between the design of clusters PCLx and others like RFBLG etc .

There are a few nagging questions which I was not able to find in the forum hence i have to post a new question.
I am a little confused about the difference between the different clusters .
If i start with RFBLG i.e. the cluster for BSEG BSEC etc ,I can see that the tables which are part of this cluster
can be viewed through different methods like
1) whr usd list for RFBLG
2) dd02l table and give the required parameters there
now when I compare this with another so-called cluster PCL1 if find that PCL1 is not recognized as a cluster
and also I am not able to see the same in dd02l table when i give PCL1 and the tabtype as cluster which I was able to see
for the RFBLG ,there are other tables similar to RFBLG .
1) SO what is the difference between the RFBLG type of clusters and the PCLx type of cluster
2) are pclx and rfblg..type of clusters same ?
3) why does PCL1 shows that it is a transparent table ? where as rfblg shows in a diff way in se11
4) i know we access data from PCL1 using import and export stmts ,DO OR CAN WE DO THE SAME FOR RFBLG
5) I found that each and evry cluster table had diff fields ,this was kinda surprising for me as I had been thinking
that all cluster tables need to follow a certain rule ,SO WHO DECIDES THE FIELDS OF A TABLE CLUSTER ?
6) PCL1 has the index button enabled ,which again I think is not according to the cluster table rules?how?
7) I understand that we can save data in form of internal tables in the PCL1 cluster ,can we do the same in RFBLG ?
8) Can I think on lines that PCL1 and RFBLG type of cluster are two totally different types of data dictionary objects
and the usage and implementation of both of them is different and that the design and the BASE of both of such objects
is different .
I know this is a long list but I am sure that answers to these questions would really require some one who has really really work hard and invested a lot of time in understanding the dictionary system.I am awaiting a few answers ,few hints and a healthy discussion till we get them .
Thanks ...
a

Hello,
1/
BSEG is a typical Cluster Table.
This means that the physical table BSEG does NOT exist in the database, physical data for BSEG is stored in the database (table) cluster RFBLG.
In ABAP however you can perform selects on BSEG (with all fields from the SAP repository structure, see SE11 on BSEG), during execution the SAP database layer will translate these statements to physical selects in the RFBLG database table, so in ABAP this is transparant.
More info :
[http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm]
2/
PCL1, PCL2, ... are normal SAP transparent tables, however in HR they are often called HR cluster table.
Transparent tables are SAP objects where there is also a database table with the same name that contains the physical data.
However the PCL tables are somewhat different from normal transparent tables (data is compressed, external programs can not interpret the data, ...).
This means that in ABAP you can not use simple SQL statements to access data in PCL tables (because of compressed format).
In stead statements like EXPORT TO DATABASE and IMPORT FROM DATABASE need to be used.
More info :
[http://fuller.mit.edu/hr/cluster_tables.html|http://fuller.mit.edu/hr/cluster_tables.html]
Wim

Is there any difference between R/3 4.7 version and ECC 5.0????

Hi All,
Is there any difference between R/3 4.7 version and ECC 5.0 for the transaction RSA5.
Regards,
Andy

Andy
Functionality wise I didn't see any difference other than new datasources in ECC5.0
Thnaks
Sat

What is the difference between credit memo in invoice year and in next year

Hi!
I'm new here.I'm study SAP ERP.I don't know what is the difference between credit memo in invoice year and credit memo in next year (asset accounting).Can you show and give me an example, please!
Thanks and best regards!
Edited by: dinhtuan on Jun 28, 2010 3:10 PM

Hi,
Maybe have a look at the SAP Help for further information (http://help.sap.com) : e.g. 'Posting Credit Memos Integrated with Vendor' or 'Posting a Credit Memo Offset Against a Clearing Account'
Transaction type 105 for credit memo on current acquisition made in the current year, posting key 75. Or transaction type 160 for credit memo on acquisitions from prior years. posting key 75.
Note: determine if the asset was acquired in the current fiscal year or in a closed fiscal year (Display asset values).
If the asset was acquired in a fiscal year that is now closed, correct the past depreciation using a write-up (in that case check out and refer to Posting Write-Ups).
I hope this helps.
Kind regards,
Brigitte

What is the difference between these two reports MC.1 and MB5L

Hi
what is the difference between these two reports MC.1 and MB5L?
what is the Purpose of each report?
Material ledger is activated for this plant, we found some amount difference between these two reports, my client accounting department used to compare these two reports while year end/month end closing
Thanks
Raju

MC.1 will give you the report for plant analysis as per plant .
MB5L report will give you list of stock value as per G/L account wise.

Difference Between SAP ECC. 6.0 and 4.6c

Hi
What is the Difference Between SAP ECC. 6.0 and 4.6c
with respect to module wise, like SD, MM, FI,
thanks
Satish

Hi,
There is lot difference between 4.6c and 6.0
1) ecc 6.0 coming with inbuild webdynpro , BSP it is not 4.6c
2) In ecc we have interactive forms concept where it was not there in 4.6c
3) 4.6c there is no unicode concept here we have unicode and non unicode
You can follow the link also
difference between SAP 4.6C and SAP ECC6.0
Rgds,
Suman

Sound difference between an ipod classic 160gb 2009 and an ipod 80gb

Similar Messages

Maybe you are looking for